I sure do wish I lived in your neck of the woods. Thanks for always being so kind to all of us. Youve saved me tons of times as always. My be cool radiator is due to arrive soon😃. I can't wait. GOD Bless.
I had a major crack in my 88 IROC. For some reason it did not have the triangle stiffeners from the frame to the cross-member. I added those form a salvage yard along with a wonder bar from Global west suspension. I should have kept that car; fun times!!
Yo Klowny, it's been awhile!! Another Pitman arm take down and of course Butter Sauce always works. Now I'll have to drive my IROC to your shop for that kind of service from Canada, 3rd gen baby!!
Hi.. Master Klowny, Thanks for all your videos greetings from a huge fan from Venezuela.. All your videos have helped me a lot, I have a rs 1992 25th .. I have a question and I would like you to make me the suggestion, because I want to change the battery from the front to the back of the car, how many meters of cable and measurement did you use? thank you a lot..
My opinion for next cars. Stop the crack by placing small drill holes at the end of the crack and then do a v-shape on the crack to get better penetration of your weld but otherwise well done as always by you. I bet it's a whole new life working with a car lift instead of the floor? Lift was the first thing I bought after we went into our new house. Never wanna go back :-)
Dalton Jones oh lol that's because I'm used to drag anti roll bars that are used on these cars..they are sway bars that are welded in place of the sway bars..in my new video on building a camaro from too to bottom, I installed one. Thanks for watching
Ok I have a 88 gta trans am Pontiac firebird and tpi It cranks but doesn't fire Engine is 2 years old Tpi all fuses are good has 50psi fuel pressure And has spark But the fuel inj are not firing The dist was changed 1 time 15 years ago at dealer And I ordered a new icm it's easy to replace I think it pulses the plugs and the fuel inj ?? It could maybe be a bad ecu to it was changed with a new one 20 years ago to Am I on the right track with the icm first Then ecu I think if the pick up coil on the dist was bad it would have no spark and no fuel to Pls help me
Hello your videos are great, Third Gen.... Do you have a video on replacing intake manifold gaskets on stock 91 TPI along with valve covers. Also replacing water pump.
Dion Allen thanks..check out my holley stealth ram video..it shows partly how to do tpi intake manifold..no water pump or valve covers gaskets on a thirdgen
thanks for all the thirsgen videos man. not only do I enjoy them but they have helped me with my 91 firebird. keep em coming.
Awesome..thanks for watching
I sure do wish I lived in your neck of the woods. Thanks for always being so kind to all of us. Youve saved me tons of times as always. My be cool radiator is due to arrive soon😃. I can't wait. GOD Bless.
lol awesome..enjoy the install
wish I lived by him too lol, love his third gen vids
Awesome video! Planning a complete front end rebuild on my 89. I'll be looking for those cracks just be sure.
Thank you Sir for all the help you have been, are and continue to be. I bought an 89' Camaro and you've helped me out so much.
thanks for watching..and good luck with your camaro
Man you move fast ....You always make it look so easy.... must come with lots of experience
69 NovaGuy u can say ive been turning a wrench for quite a long time lol
To fast. It’s hard to follow.
@@monavieforal Ever heard of the pause button?
Sleep can wait - it's klowny time
Super Duty 455 dats right babyyy
Well its been a while, always look forward to a video done by the Klown. great stuff !
125 SM thank u sir!!
Great work bro!
Thanks..don't forget to subscribe
I had a major crack in my 88 IROC. For some reason it did not have the triangle stiffeners from the frame to the cross-member. I added those form a salvage yard along with a wonder bar from Global west suspension. I should have kept that car; fun times!!
jewllake cool thanks for watching and commenting
Now that was an interesting fix. Well done buddy , I had no idea about the crack.
STEVE ROB thank u sir!! Im all about fixing cracks ;) thanks for stopping by!
Yo Klowny, it's been awhile!!
Another Pitman arm take down and of course Butter Sauce always works. Now I'll have to drive my IROC to your shop for that kind of service from Canada, 3rd gen baby!!
Clem Mahabir yes baby!!
Love your vids with my coffee.
Thank u
I love these cars. I really gotta find one of those rear hatches. That is cool. Love your videos as always. Happy holidays
Thank you for watching..happy holidays!!
Good job you have perfect tools wow.
thank you..dont forget to subscribe
Hi.. Master Klowny, Thanks for all your videos greetings from a huge fan from Venezuela.. All your videos have helped me a lot, I have a rs 1992 25th .. I have a question and I would like you to make me the suggestion, because I want to change the battery from the front to the back of the car, how many meters of cable and measurement did you use? thank you a lot..
So if I'm seeing it right you don't need the old sway bar to frame brackets? If you upgrade to a wonderbar. My driver side one broke near a bolt hole.
My opinion for next cars. Stop the crack by placing small drill holes at the end of the crack and then do a v-shape on the crack to get better penetration of your weld but otherwise well done as always by you. I bet it's a whole new life working with a car lift instead of the floor? Lift was the first thing I bought after we went into our new house. Never wanna go back :-)
He wasn't filling a crack, he was joining the two sides (upper and lower, of the frame crack). Drilling a hole would have done nothing.
rollbars are important if you roll the car, to keep the roof from coming down on you. Antisway bar keeps the car from leaning
Dalton Jones huh?
lol, you called the swaybar a rollbar. Your videos are very informative. I'm getting ready to do both of mine.
Dalton Jones oh lol that's because I'm used to drag anti roll bars that are used on these cars..they are sway bars that are welded in place of the sway bars..in my new video on building a camaro from too to bottom, I installed one. Thanks for watching
Man you work on some sweet rides. Any historical information on the wider front wheels / tires "set up"? I see K frame and suspension changes.
I have the Top Down Solutions Wonderbar on that I believe you removed. Did the frame rail crack even though that Wonderbar was on??
I dont remember the situation..but he might have put that on after it cracked
What gun is that ( part number)? And where did you buy it?
Would love to see a walk around with these 3rd gen
Saeng M i think i might have a vid of this car with a walk around..i think its titled " new heads and cam"
yo klowny, awesome vids..
what kind of steering fluid did you use??
Ok
I have a 88 gta trans am Pontiac firebird and tpi
It cranks but doesn't fire
Engine is 2 years old
Tpi all fuses are good has 50psi fuel pressure
And has spark
But the fuel inj are not firing
The dist was changed 1 time 15 years ago at dealer
And I ordered a new icm it's easy to replace
I think it pulses the plugs and the fuel inj ??
It could maybe be a bad ecu to it was changed with a new one 20 years ago to
Am I on the right track with the icm first Then ecu I think if the pick up coil on the dist was bad it would have no spark and no fuel to
Pls help me
Hello your videos are great, Third Gen.... Do you have a video on replacing intake manifold gaskets on stock 91 TPI along with valve covers. Also replacing water pump.
Dion Allen thanks..check out my holley stealth ram video..it shows partly how to do tpi intake manifold..no water pump or valve covers gaskets on a thirdgen
what kinda hatch replacement is that!?!?!
great vid thanks klowny :)
TheSection25 thanks for stopping by
What is the part number? I can not tell what you said. Thanks
Cool vid man! You know if 2nd Gen Camaros had the same problem with the frame cracking?
Desert88 Z28 as far as i know..i think its more of a thirdgen issue..but anything is possible..thanks for watching and commenting
Wiuld u sell the wonder bar u took off
What kind of hatch is that
Thanks!
wakefoot thank u!
Question klowny ..where did you get that steering shaft? The one on my 83 z28 is the factory one but i need an upgrade.. Thanks
Jersa Sanchez I have a video up on a steering shaft upgrade..Matt Walter shaft
👍👍👍
The 1/2 one??
LT11988 its the milwakee fuel..pn 2766-20 thats for the bare tool without battery or charger
you have a lot of goodies on this car you can tell this is your butter sauce lol :)
RamVan Bobby lol thanks..this car is a customers car
this video brought to you by Father Guido Sarducci
That's right lol
@@klowny1969 you sound very much like him haha..
I have a Global West wonder bar...
Thirdgen83 i have global west sub frame connectors on my personal car..great company
Battery disconnect, neg term first buddy.
russellfheim thanks for watching and commenting. .dont forget to subscribe! !!