Hey guys we're running a sale this Labor Day Weekend 15% off the entire website use code FREEDOM15 at baldeagle.com GET THEM SHIRTS, HATS, FREEDOMS and More!
Longtime subscribers can easily notice how much more comfortable James has gotten in front of the camera and his amazing personality shines through! Cleetus did an amazing job at foreseeing what James would eventually become when he brought him on the team as his mechanic/partner. Seeing other channels in the past and even this channel have part of the team branch out on their own I was extremely excited when we learned that James was part of the Motion Raceworks partnership deal!!!! That means that hCleetus and himself are going to be working together for quite a while in the future!
James in the jet boat and cleet with his flamingo and George in the nightmare is some of the funniest friendships I have ever seen. The other guys are so lucky and are doing great themselves….. the best content on RUclips…
Would love to see a full rebuild series of the jet boat, the design of the old hulls is super cool. Hope you guys can do something awesome with it. Thanks for all you do!
James....don't use water thru the headers. You don't need it. The headers are already old and crusty looking and you don't have noise restrictions there so no need for the water. It's only causing you tunning problems running water thru the headers. Turn them valves off!
This 1000% its not needed at all. The water just helps to keep the chrome from bluing and to protect the hull/transom from heat damage. The headers are far enough from the hull and transom for that to not matter and they sure as shit aint chrome. Run em dry and let her eat!
Remember when James would only have a couple seconds of camera time, now without him there's no silly punchlines haha. Love the progression of this channel!
Him AND FreezerBurn are basically like Hammond and May. What are the odds that Cleetus created a whole new style of Top Gear?? Astronomical, but it has been done.
@@jimrustle643 I definitely see that. Cleetus is too awesome. Inspires murica in everyone! A true American hero! I'm a vet. So I can say that lol. Jk. But fr fr
The headers of Jack stands boat are dry headers and don't need water to cool the exhaust. The water is backing up into the heads and causing it to run bad.
@@trentdawg2832 The heads are cooled by the engine cooling system. The headers really do look like dry headers. Some are water cooled to keep people from getting burned or to keep the metal from turning blue.
Possibly. He did have milky oil. Also a gate valve coming directly off the pump helps bring the water pressure in the engine down. A tight berkley can pump 100psi through the water line, no gasket is going to stand a chance
This is fun stuff and after the challenges are over, that boat of James can be turned into something pretty sweet with not a lot of money. Hope to see some kind of project involving it.
Ehh, the boat is pretty beat and has some rot in it. They have the money to and the shells aren’t that expensive, I would assume they would probably just get a new shell
@@ryanjohnson8340 i love how everyone think the boat could handle power without ripping in half when the transoms made of rotted fibreglass an silicone lol
@@bmws1krr179 nevermind the turbo, he just needs to talk to Finney about a new pump and blue printing the bottom of the hull. That alone will make it the fastest boat outbof all his buddies
@@pw383426 I'm fairly new to these boats but it looks like a blast. I did go back and see the hull on this one seems effed. Lots of trial and error to get to fins to where it's at including the hull.
Love it. I had a 19' big block jet boat for 10 years. It was built for fun, not fast, but it still ran 70mph with light load in the boat, and from a dig it would hang with much higher hp boats for a good while, a professionally built pump really makes the biggest difference. About 475hp, 93 octane with booster, 10.5:1 BBC, Dominator MB-12S pump with stainless impeller, loader, ride plate, droop, diverter, Comp Cams Jet Boat cam, Big oval heads, dual plane intake, Edelbrock 850cfm Marine Carb. I believe ignition timing was set at 36 degrees, vacuum advance disabled, Mallory HEI with integrated adjustable rev limiter. My boat always ran, always started, never did the Holley loading up, flooding, leaking fuel, any of that crap. If you want reliable on the water stick with a basic carb, or be a freaking expert with Holley's because you will need it if that's what you run! I do miss the boat sometimes, but my kid was terrified of it, and I barely got to use it toward the end, so I sold it. It was a great, fun, reliable good looking boat. Would buy another, but a more functional boat like a day cruiser, and thru-transom exhaust, the noise gets old, not to mention the Game Wardens on the lakes are always busting your balls with OT headers. If they are ugly run them dry, you only need the water to be "legal" (or use muffler inserts) and to keep chrome from burning off.
Big body language at the end of the episode with George and Jackstand. Hands on hips. Aggressive assertive stance. The competition is so real. Loving the trash talk and tuna pranks. Keep it coming. This boat content just gets better and better.
James needs to turn the water down on the exhaust. No steam til 3,000 rpm and and set the idle higher so it doesn't die. 1,200 rpm idle should be fine.
@Max Power I know NOTHING about boats. If ya don't mind, why do you need to cool the exhaust with what basically looks like an open header exhaust. It can't be a flow thing can it? Again, I know nothing.
I don't know much about boats either but this is a weird thought is there any way to get a butterfly valve for the water line that feeds the exhaust so every time he hits the throttle it opens up and allows a little bit more water to go through? Basically like an intake but for water. That way when hes idling there's not so much water in it and when it gets on it it'll dump more into the exhaust keeping it cool and muffling the sound I don't know if they make such a device But if they do he could hook it to the throttle linkage.
I agree. It sure seems like Goerge really likes to push the envelope. I dont recall seeing this when Goerge was on RMRW or the other occasions he was on the channel. Hope it's just playing...
I’ve heard you can use women’s pantyhose as a belt substitute. Assuming one has a woman around that wears pantyhose and that you can get them off. Lol.
Here a tip for running that THUMPER CAM. I run one in a SBC and the best setup for them is that they LOVE locked out timing! its a night and day difference even compared to an initial timing of 24 Degrees. I run 37 locked out with flat top pistons and ~ 9.75 compression ratio. I use a Vacuum advance eliminator to Clock the distributor properly and a lock out plate on the mechanical advance. It start it i just hold the throttle half way down so it don't lumber on the starter. I hope this helps if you even get to read it!
Surely George and Zac deserve bonus points for repping McFarland Marine shirts and the extra loud board shorts? 🤷 Cool series guys and heaps of laughs!
Never thought I'd see people talking shit to one another without getting butthurt and starting a riot. Thanks for still being genuine American Fellers.
Love these boat challenge videos! The smack talk with James and George is great! Welcome to the channel full time George. James and George together is always a recipe for a good laugh! Keep up the good guys!
You guys are genuinely great guys. You can see that your friendship is rock solid. I wish I had the chance to kick it with you on the level without cameras to get to know you all. You definitely seem like the kind of crew that I would love to be a part of.
The nightmare seems to be a real Knightmare, the exact same energy as Jeremy Clarkson's Alfa 75. Or at least until he cut the tow cord XD Still tugged the Red Rocket into dock regardless, it may be slower, but its a trooper carrying its broken brethren home
Yo, alec is the man, keep that man on camera!!! Freakin layn on the front holding the camera in one hand, during drag race..... Sir, you are the best addition since the crew dropped to 2. You 3 are a great team! HellYeahBrother!
Am I the only one that wants Jackstand and the boys to tear apart that boat and rebuild it 100% to make it a certified unit? The Saga of Jackstand and the Jetboat must continue!!!!
funny enough, at our drag boat events up here in the midwest (where we know how to run a small boat fast) there is only 1 jet boat in a field with about 12 outboards (in the unlimited class that runs 115+).
Almost 400 hundred down votes? How could you down vote these guys they are cool as hell and funny and genuine. i would love to hang out with these guys. Damn good guys.
He could be pulling parts from the shop that are laying around or not being used. How many v8’s are in that shop? There only two outboard motors and that’s nightmare and flamingo.
As a boater w/ a ski fish and a deck boat… I can certainly appreciate the concavity lol- This series is fantastic!! Love the color commentary “Ain’t got no Laces to LEND Brothherrrrrrrrr!!! 🤣🤣🤣
Cavitation is a phenomenon in which the static pressure of a liquid reduces to below the liquid's vapour pressure, leading to the formation of small vapor-filled cavities in the liquid. When subjected to higher pressure, these cavities, called "bubbles" or "voids", collapse and can generate shock waves that may damage machinery. These shock waves are strong when they are very close to the imploded bubble, but rapidly weaken as they propagate away from the implosion.
I think James needs to not put the water into the exhaust. They're not jacketed marine manifolds or through the hull so it doesn't matter. Looks like it's just hurting the motor
Yeah, really not sure why cooling them was ever deemed necessary. Even if it is, probably only for long sustained high throttle runs well over what they'll ever be doing
Why would anybody have something like that in the first place because with the original closed system air cooling than everything would be fine with water pump n shit. Just have to strictky use water only for the fishes..
My boy James heard drag race and came prepared lol. When that boat is feeling good it moves out. The flamingo is a nice vessel. The nightmare gets style points
Cletus - yhe prop you are using is catching engine exhaust on launch and willcause cavitation. The prop you are using are usually found on inboards such as Nautiques. Get a 17 pitch prop to start.. 15 is quick out of the hole, 19 higher top end, 17 middleish for a 150 engine.. and watch your RPMs
He has that extra merc Laser prop that came with the boat, it is a through hub prop, the chopper he is running is an over hub exhaust which are known to cavitate out of the hole, plus with two people that motor doesn't sound like it is turning more than 5000 rpm. If he switches props he'll gain a ton of acceleration & probably pick up some mph because the motor will get into it's powerband.
@@nightlike9006 my brother the same way. He will buy one for 1000 fix it and trade it off for two more cars or enough to buy a couple more easy fixers. He'll turn 1,500 into 5,000 in a week maybe less
@@jaynikk758 he dont descriminate. If its an easy fixer and he can make a few dollars. Stay away from German cars except VW some of those cars are easy fixers too. He usually buys and fixes cars to help out the less fortunate folks buy a descent runner. He owns his own shop too so he fixes their cars when problems arise
I had a boat with a 632 big block a few years with nitrous and it was nothing but problems because it sat more than i had it out. I wont ever get another boat. They sure are fun though.
@@brianclark785 the inside is still water cooled the valves in question are to keep the headers cool if they were still pretty lol..that ship has sailed so it is no longer needed.
The cooling system on his boat looks like it was a budget build. Should have a pressure regulator to regulate the water pressure coming off the drive into the engine, and a proper setup has valves that go to the headers that shut themselves at idle, and will open at speed.
Been wondering about all that. The jet boat I almost bought this spring didn't have that setup. Had me curious cause imma find me a jetboat! This deal is making me want one more
I feel like a lot of James' problems could have been solved by just keeping the header water turned off. It is just there to keep the chrome cool and looking nice, and his have no chrome to keep looking nice.
Cleetus just doesn’t know how to drive or set up a boat. His jack plate is set too high for drag racing, but it’s good for top speed. If he had a power jackplate, and knew how to trim it on the fly, he would have walked the jet. The engine was too high for the turns or launching. Also, that engine has been set up for you to start it in gear. Performance outboards idle a little high and don’t like to shift. That’s the reason he blew reverse. The only reason he didn’t win is because he doesn’t know how to set it up or drive it.
Hey Cleet, I'm not sure if you do this already, but if you don't, I'll tell ya'. It's always a good idea to use compressed air to blow all the water out of the boats' cooling systems A.S.A.P. after getting them out of the water, just to help reduce corrosion.
Just imagine how fast James's boat would be in the drag race with it running clean the entire run that thing is a beast but just imagine it at full running potential it's from the 80s and it would give all boats a run
I lost a water pump/alternator belt on a 43’ America's Schooner Cup entry half way from Marina Del Rey (near LAX) to Point Loma (San Diego). With strong on shore currents an no wind. The owner tried to make a belt out of electrical wire and duct tape linearly wound. Which failed almost instantly. I took the wire and braided it and spirally wound it with duct tape. That worked for over two hours and we used it to stay away from shore and meet the harbor patrol/ boat AAA mid way from San Diego. It may have made it all the way.
Someone needs to teach James that you don't have to have the header water on, FInnegan's boats don't have water in the exhaust. Just keep it turned off. All the water does is silence the exhaust and keep the headers cool.. who cares if they get a little warm.
@@kadmow he's shown in the previous video working on it that he had to retune the carb because the water kept flowing back in the head and killing the engine. There's absolutely no reason to have it on. Just turn it off and tune the carb like normal.
Also the primary and secondary float vents have that weird bridge that goes between them. That's not right. They should flow to open air. Normally a marine float vent has a 180* bend to overflow back into the carb.
@@pw383426 if you look close it's spark plug boots and a piece of tubing to mimic the marine/offroad carbs so that it doesn't overflow.. I'm sure James made it himself.
I clicked off the bad friends podcast channel so fast for this that Bobby Lee got whiplash 🇺🇸 Absolutely my favorite challenge video by 1776 bald eagle lengths 🇺🇸
Hey guys we're running a sale this Labor Day Weekend 15% off the entire website use code FREEDOM15 at baldeagle.com GET THEM SHIRTS, HATS, FREEDOMS and More!
*Thats whats up brother thanks for all you do...MERICA!!!*
Frig man just ordered my heat waves oh welll🤘🏻🇺🇸
Dammit.. I just bought 3 new shirts on Friday.
You’re the man Cleet!!! Thanks
I love you guys! Hell yeah
Longtime subscribers can easily notice how much more comfortable James has gotten in front of the camera and his amazing personality shines through! Cleetus did an amazing job at foreseeing what James would eventually become when he brought him on the team as his mechanic/partner. Seeing other channels in the past and even this channel have part of the team branch out on their own I was extremely excited when we learned that James was part of the Motion Raceworks partnership deal!!!! That means that hCleetus and himself are going to be working together for quite a while in the future!
I agree and i see the same happening with alec when he gets comfortable.
This. All of this. Been watching that duo for years.
James was super awkward and quiet when he started. Never saw the personality we see now lol
James in the jet boat and cleet with his flamingo and George in the nightmare is some of the funniest friendships I have ever seen. The other guys are so lucky and are doing great themselves….. the best content on RUclips…
Are they business partners tho
Everytime Jackstand's boat fired up Cleetus and Georgie's heart sank just a little further...
Would love to see a full rebuild series of the jet boat, the design of the old hulls is super cool. Hope you guys can do something awesome with it. Thanks for all you do!
Toasts old motor would be a great fit
@@natemarotto3965 toasts old motor is going in that square body roll back that was left at the FF
Jame's boat is like the Ruby for the boats ! Junkyard founded, running sketchy on a old rusty V8.. and it's RED !
And I bet after these challenges, if they keep it, it'll get a turbo 427...
Become a playmate for game over.
@@earlyre I'm hoping more like 540ci lol
The back of their boat needs to be stickered up like ruby and then kev needs to fab up a hitch like leroy so ruby can pull it
@@pw383426 yeah who needs turbos when you have a 9 liter motor 😂 and if you run turbos, even better 🤣🤣
Let's Go brother!
James....don't use water thru the headers. You don't need it. The headers are already old and crusty looking and you don't have noise restrictions there so no need for the water. It's only causing you tunning problems running water thru the headers. Turn them valves off!
This comment needs more likes!!!
White vapor smoke shows it
This is the absolute truth he has no reason to inject those things
Yea they sure as hell ain't some fresh set of chrome Bassett headers on there!! Shut that water off to the headers!
This 1000% its not needed at all. The water just helps to keep the chrome from bluing and to protect the hull/transom from heat damage. The headers are far enough from the hull and transom for that to not matter and they sure as shit aint chrome. Run em dry and let her eat!
Hearing y'all root for the other boats to break down is the most wholesome fun you can have with your buddies. Good stuff
Remember when James would only have a couple seconds of camera time, now without him there's no silly punchlines haha. Love the progression of this channel!
Him AND FreezerBurn are basically like Hammond and May. What are the odds that Cleetus created a whole new style of Top Gear?? Astronomical, but it has been done.
@@jimrustle643 I definitely see that. Cleetus is too awesome. Inspires murica in everyone! A true American hero!
I'm a vet. So I can say that lol. Jk.
But fr fr
@@jimrustle643 Definately what the american version of top gear should have been
James is a third of this channel. Cleet, mady, jackstand!!!!
Jackstand and Georgie are great
I almost feel like George should get 1 point for every time he has to tow another boat XD
He should have deducted half a point from Jackstand each tow in so it would be George-5 Jackstand-6 Cleetus-7
The headers of Jack stands boat are dry headers and don't need water to cool the exhaust. The water is backing up into the heads and causing it to run bad.
That makes no sense. .....wouldn't you want water too the heads to keep them cool.......is it a circulation problem? ??
@@trentdawg2832 Headers, not heads.
Not gonna run good if the water gets into the combustion chamber.. needs proper headers on it
@@trentdawg2832 The heads are cooled by the engine cooling system. The headers really do look like dry headers. Some are water cooled to keep people from getting burned or to keep the metal from turning blue.
Possibly. He did have milky oil. Also a gate valve coming directly off the pump helps bring the water pressure in the engine down. A tight berkley can pump 100psi through the water line, no gasket is going to stand a chance
i really REALLY hope jackstand rebuilds his boat! itll be soo sick!
Needs a TEXAS SPEED MOTOR
needs some Texas Speed love!
Cleetus, did I miss something? Is your boat waterlogged? Why is there no performance? That thing should jump up and get busy all the way to 65-70 mph!
I think when this is all over you need to take Toasts old Big Block and put it into James boat and have a real Fun Machine.
that jet drive is probably going to self destruct with that 632
@@mickoostingh5777 It very well might...but it would still be fun to watch. :)
@@craig2963 thats for sure
That would rip those stringers right out lol
The boat would tear itself to pieces from the sheer torque that engine makes, but i am all here for it 🤣🤣🤣
I love that every video George seems like he is truly living his best life! Best addition to the channel since Leeroy and he is my spirit animal
I've never seen a more perfect fit than James and that boat. Big block Chevy and loud as hell.
So true
Eventually they need to drop a Ruby Clone in there.
I hope this marks the start of McFarland marine racing, we need a floating version of Ruby.
Dude if James's boat was running even 50% better this would have been no competition 👍
It was a competition between George and Cleetus
@@joshuanicolai4776 he would’ve never even been able to buy that boat if it was running even 25% better than it was running
That boat is one HELL of a UNIT brother!
They just need to throw an LS in there or the motor from toast.
Guys, please don't ever grow up. We Need kids like you to make the world a happier place. And louder..... Keep on...
JACKSTANDDDD, "like i tell george, anyone can buy a minivan". Someone give this man a job in stand up comedy. Great content ya'll. Always stellar.
This is fun stuff and after the challenges are over, that boat of James can be turned into something pretty sweet with not a lot of money. Hope to see some kind of project involving it.
Ehh, the boat is pretty beat and has some rot in it. They have the money to and the shells aren’t that expensive, I would assume they would probably just get a new shell
Twin turbo ls haha
@@ryanjohnson8340 i love how everyone think the boat could handle power without ripping in half when the transoms made of rotted fibreglass an silicone lol
@Max Power yeah but you know these boys would be going crazy and have like minimum 1000hp lol
Jackstand Jimmy is the winner overall. I don't care what anyone else says.
James boat sounds great when it's running.
It sounds so good and it’s super fast
@@rylanmcguire6789 surprises the hell out of me especially what he paid for it. Imagine that being your first boat.
Super saddened as it explodes 🤪🩹🚤
Lmao this boat challenge is like 10x's better than even anticipated. The trash talk is GREAT!!! 🤣🤣
After this series, James need to rebuild and make that boat a screamer.
Collab with Kevin and Finnegan
@@jkbaker01 that would be cool
@@mbbb9244 the haul is still good the engine is trash.... I'd buy it from them and make a drag boat out of it again
With a blower and zoomies!
*With a nitrous texas speed 427*
I would really love to see Jackstand's boat properly sorted. It has potential to be an amazing beast without the troubles that he has been having.
No doubt. With a little TLC Red Rocket would be a ripper.
Love how temperamental this thing is with all its problems tho. You never know if its gonna play nice or not, but when it does, it shreds the water.
I'd like to see it turboed like Mr Finnigans
@@bmws1krr179 nevermind the turbo, he just needs to talk to Finney about a new pump and blue printing the bottom of the hull. That alone will make it the fastest boat outbof all his buddies
@@pw383426 I'm fairly new to these boats but it looks like a blast. I did go back and see the hull on this one seems effed. Lots of trial and error to get to fins to where it's at including the hull.
The jet boat was so dope it was hard not to laugh at how much trouble it was having but then when they went to race it just took off lol
He's having so many problems cause he's adding water to that exhaust when it's not needed with that style header
Yup
For real
I think George being on the channel is one of the best things that’s happened yet!!!
I really appreciate George’s presence on the channel lately!!!
Isn’t there a blueprint 632 sitting in the shop? Seems like a good fit for James boat.
Absolutely!
I like avocados
@@chloehennessey6813 I can just see it now, they spend a lot of coin on the Red Rocket, and go up against Game Over.
You’re right, that would be a good fit
@@trixter192 No contest. Game Over has technology everywhere.
Not to mention the pilot parachute and Kevlar undies.
Can’t wait to see James boat rebuilt after the challenges
Exactly what I was thinking
Love it. I had a 19' big block jet boat for 10 years. It was built for fun, not fast, but it still ran 70mph with light load in the boat, and from a dig it would hang with much higher hp boats for a good while, a professionally built pump really makes the biggest difference. About 475hp, 93 octane with booster, 10.5:1 BBC, Dominator MB-12S pump with stainless impeller, loader, ride plate, droop, diverter, Comp Cams Jet Boat cam, Big oval heads, dual plane intake, Edelbrock 850cfm Marine Carb. I believe ignition timing was set at 36 degrees, vacuum advance disabled, Mallory HEI with integrated adjustable rev limiter. My boat always ran, always started, never did the Holley loading up, flooding, leaking fuel, any of that crap. If you want reliable on the water stick with a basic carb, or be a freaking expert with Holley's because you will need it if that's what you run! I do miss the boat sometimes, but my kid was terrified of it, and I barely got to use it toward the end, so I sold it. It was a great, fun, reliable good looking boat. Would buy another, but a more functional boat like a day cruiser, and thru-transom exhaust, the noise gets old, not to mention the Game Wardens on the lakes are always busting your balls with OT headers. If they are ugly run them dry, you only need the water to be "legal" (or use muffler inserts) and to keep chrome from burning off.
Those victory braps from James are priceless. All he needed is that win. 😂🏆
just walking them out lol
james badass jetboat needs to live on after this challenge, put some efi and get rid of that cooling system and backflowing headers
oh yeah , after the challenge is done, they need to max it out
“It’s not here for a long time, it’s only here for a good time”. - Jackstand. *T-shirt inspiration
Big body language at the end of the episode with George and Jackstand. Hands on hips. Aggressive assertive stance. The competition is so real. Loving the trash talk and tuna pranks. Keep it coming. This boat content just gets better and better.
James needs to turn the water down on the exhaust. No steam til 3,000 rpm and and set the idle higher so it doesn't die. 1,200 rpm idle should be fine.
@Max Power I know NOTHING about boats. If ya don't mind, why do you need to cool the exhaust with what basically looks like an open header exhaust. It can't be a flow thing can it? Again, I know nothing.
@@danielnelson4881 You dont, as far as I know.
@@danielnelson4881 Coast Guard rules regarding fire safety. Water injection also legally counts as a muffling device.
@Max Power yeah he should definitely find a marine cam for it.
I don't know much about boats either but this is a weird thought is there any way to get a butterfly valve for the water line that feeds the exhaust so every time he hits the throttle it opens up and allows a little bit more water to go through? Basically like an intake but for water. That way when hes idling there's not so much water in it and when it gets on it it'll dump more into the exhaust keeping it cool and muffling the sound I don't know if they make such a device But if they do he could hook it to the throttle linkage.
"Anyone can buy a minivan" - James as he desperately tries to get his Fiero to start
🤣🤣
☠️
Best comment so far!
💀💀💀💀
I think George is finally realizing that putting 200 hp decals on a 100 HP Mercury outboard doesn't magically increase your horsepower by 100.
“I can smell the paint”
Only a K&N sticker can do that lol
I was looking for a comment like this lol , looks like a L4 100 hp or L4 115
Goerges aluminum prop was his down fall. 4 blades for the bite. Goerge shoukd get a point every time he pulls someone in. Reliability challenge
At least he got one and on the other end of that I think James should lose a point for lack of reliability.
As long as the trash talk between James and George doesn't get serious this is pretty fun
kinda feel like it’s serious though
I don't know, man. It seems to be ramping up pretty quick.
I hope they know the line, but I guess we'll see lol.
I was thinking the same thing seems like there is some real tension between them
@@zakm7907 Lmao @ him cutting the line with the razor blade. I think it's all in good fun.
I agree. It sure seems like Goerge really likes to push the envelope. I dont recall seeing this when Goerge was on RMRW or the other occasions he was on the channel. Hope it's just playing...
Fun drinking game: take a shot every time Cleetus says "cavitate"
Doing it now, hell yeah brother!
Garrett, today is my 18th birthday, I just got tickets for Cleetus & Cars Houston. I’m so excited
Hell yea brother!
Happy Birthday 🎈🎉 🎂
Get a shout out for me brother!! From the US Army in Germany!!
Happy birthday brother! Where can I get my tickets? 😶
@@pedroos022 thank you for your service.
"Wanna borrow my shoe laces?"
"Get a shot of my shoes..."
"Ain't no laces to lend brother!"
I'm dead.🤣
I’ve heard you can use women’s pantyhose as a belt substitute. Assuming one has a woman around that wears pantyhose and that you can get them off. Lol.
Here a tip for running that THUMPER CAM. I run one in a SBC and the best setup for them is that they LOVE locked out timing! its a night and day difference even compared to an initial timing of 24 Degrees. I run 37 locked out with flat top pistons and ~ 9.75 compression ratio. I use a Vacuum advance eliminator to Clock the distributor properly and a lock out plate on the mechanical advance. It start it i just hold the throttle half way down so it don't lumber on the starter. I hope this helps if you even get to read it!
Jet boat needs a restore and stroker with a super charger after this “season”
Toasts old motor or bust
James needs to plumb some water through his exhaust
@@codylinn9548 no shit...that would be amazing...but it CLEARLY needs a new tunnel and transom, you can see it flex in a couple bits.
Junkyard Tahoe motor or bust lol
Agreed just throw everything go fast at it lol
Them yelling at James “who timed your boat” is not the best insult considering it barely runs lol
It’s running on a solid 6
When you set the mechanical advanced at about 1500rpm then yeah your idle timing is going to be waaay low.
It sucking water into the engine has nothing to do with it running like shit.
@@Deepwaterjew a little water is fine, as a treat
@@imdabeast100 yeah but that's like telling a fat kid the fun size Snickers is all he gets.
"There's budget left"
Famous words by Jackstand
Need a shirt made.
What!? budget left and he didnt get any spray
that's where George needs to come up with a towing bill. just happens to be the same as the budget James has left.. lol 🤣🤣
@@mrmcflunday2164 sneaky......I like how you think 😂🤣
B.O.A.T. = Break out another thousand...
Jackstand wins already for just the sound. And the fact that this bigblock is literally the reason why I watch!
James boat deserves 5 bonus points for best sounding exhaust,100%...
👌
And cams, that chop is crazy
Jackstand learned why there's that old saying, "The two best days of a boat owners life..."
The day you buy it and the day you sell it
Yup just sold mine I can def attest to this.
Boat. Bring Out Another Thousand
@@trencher325 The saying is "Break out another thousand."
If it flies, floats or f#cks.... Renting is cheaper.
Surely George and Zac deserve bonus points for repping McFarland Marine shirts and the extra loud board shorts? 🤷 Cool series guys and heaps of laughs!
George deserves 1 point for each time he's towed jackstand back home.
I was about to say the same
Never thought I'd see people talking shit to one another without getting butthurt and starting a riot. Thanks for still being genuine American Fellers.
It's like theyre normal people hahaha, none of this over enthusiasm.
@@flexnlexus129 I can't stand the fakes that act way over hype about something trying to get their viewers hyped up. It's so cringey
Love these boat challenge videos! The smack talk with James and George is great! Welcome to the channel full time George. James and George together is always a recipe for a good laugh! Keep up the good guys!
12:19 I was waiting for George to scream "Monica!" as Garrets pulling away, lol.
When this competition is over, James boat needs to be fixed up right. That thing could be SWEET
Sadly they might sell them after this comp
Nah. Fix it up! keeper for sure
I think it's more likely that James will give it to Whistling Diesel to destroy.
Texas speed big block
I’m so glad Whistin Diesel is exposing Cletus.
You guys are genuinely great guys. You can see that your friendship is rock solid. I wish I had the chance to kick it with you on the level without cameras to get to know you all. You definitely seem like the kind of crew that I would love to be a part of.
The jet boat is an unfair advantage, but James knew that. Well played!
the only limit was overall price.... James just played the game better
@@ralan350 Hence why I said, well played.
#SUMMEROFFREEDOM
IMO George’s tow point should come from James total points 👏👍
The nightmare seems to be a real Knightmare, the exact same energy as Jeremy Clarkson's Alfa 75. Or at least until he cut the tow cord XD
Still tugged the Red Rocket into dock regardless, it may be slower, but its a trooper carrying its broken brethren home
I feel like George and Jack stand really had a rocky relationship when George first came in lol
I'm gonna be sad when the boat challenge is over. Been loving all your boating content this summer! Y'all made some killer shit this season.
Hopefully they keep the challenges going with new projects
I think we need to see jackstands boat dialed in on nitrous after the challenge
Ls swap on nitrous….
I'm in love w/ the good ol' Jackstand red BB jet ...
but I'm super impressed w/ the Flamingo even though there were some handling issues
Yo, alec is the man, keep that man on camera!!! Freakin layn on the front holding the camera in one hand, during drag race..... Sir, you are the best addition since the crew dropped to 2. You 3 are a great team! HellYeahBrother!
Jackstand needs to give that engine a good going over, probably start with either rebuilding or replacing that carb.
i think he just needs a hand throttle. Looks like he struggles to keep even pressure on that foot peddle.
It's a new carb. First thing he did to the boat.
Omg always a technophobe with basic obvious advice, James is an A1 mechanic! How condescending you are!
Unless those valves do more than just run water into the exhaust to cool them then just leave them turned off, i don't think they are helping either.
@@HashDogg06 thats how a marine engine is cooled, without out them it will overheat
Am I the only one that wants Jackstand and the boys to tear apart that boat and rebuild it 100% to make it a certified unit? The Saga of Jackstand and the Jetboat must continue!!!!
Its crazy how James boat running like total ass easily beat the other two. Just like they say boys. There's no replacement for displacement!
are you talking about hull displacement or engine displacement. its got nearly none of one, and a lot of the other
well its just as light maybe a bit heavier but it has over double the horsepower
Yes there is a replacement for displacement. Turbo.
funny enough, at our drag boat events up here in the midwest (where we know how to run a small boat fast) there is only 1 jet boat in a field with about 12 outboards (in the unlimited class that runs 115+).
James won the only part of the challenge he cared about
I bet he was sad he could not do a burnout in a boat
Almost 400 hundred down votes? How could you down vote these guys they are cool as hell and funny and genuine. i would love to hang out with these guys. Damn good guys.
There needs to be a shirt made that says, "theres still budget left". How in the world is there still budget left
Cause there’s still budget left duh 🙄
I will x2 that shirt.
This 😂
I'd buy it haha
He could be pulling parts from the shop that are laying around or not being used. How many v8’s are in that shop? There only two outboard motors and that’s nightmare and flamingo.
30 minutes!?!!?! Yeah this is going to be lit. Thanks for the content as always. Literally. A modern Top Gear. Never change Cleet
As a boater w/ a ski fish and a deck boat… I can certainly appreciate the concavity lol- This series is fantastic!! Love the color commentary “Ain’t got no Laces to LEND Brothherrrrrrrrr!!! 🤣🤣🤣
Cavitation is a phenomenon in which the static pressure of a liquid reduces to below the liquid's vapour pressure, leading to the formation of small vapor-filled cavities in the liquid. When subjected to higher pressure, these cavities, called "bubbles" or "voids", collapse and can generate shock waves that may damage machinery. These shock waves are strong when they are very close to the imploded bubble, but rapidly weaken as they propagate away from the implosion.
I think James needs to not put the water into the exhaust. They're not jacketed marine manifolds or through the hull so it doesn't matter. Looks like it's just hurting the motor
Yep, he doesn't need to run it it's only for cooling the headers which are to roached out to worry about at this point...
Yeah, really not sure why cooling them was ever deemed necessary. Even if it is, probably only for long sustained high throttle runs well over what they'll ever be doing
Why would anybody have something like that in the first place because with the original closed system air cooling than everything would be fine with water pump n shit. Just have to strictky use water only for the fishes..
@@alexmawdsley Because they’re typically surrounded by a ton of highly flammable stuff- not including the fuel.
@@Z-Ack , what? Lol! There is no closed cooling, and there is no water pump, it pulls water off the pump bowl. Not sure about your Air Cooled comment…
My boy James heard drag race and came prepared lol. When that boat is feeling good it moves out. The flamingo is a nice vessel. The nightmare gets style points
That SST that Jackstand is running is a FAST hull. That would be an AWESOME project boat.
Hey Jackstand, whenever you're ready to sell that boat, let me know. I call dibs on it lol
I call the nightmare!!!!!
I got $5k cash right now for that behemoth
This has been the best series ever...and the Jack Stand Jet Boat still gets my vote lol
Agree!
This whole George and James era is no less than amazing! Please continue these great examples of freedom!
George: “If it rips it’s gonna rip”
I felt that 😂
Also George: “he dang sure ain’t gonna catch no fish… hopefully “
James boat sounds like FREEDOM! He wins, done, over. 🦅
Since they were on the water James said “that’s like 17 cruise ships” 😂😂😂😂
Cletus - yhe prop you are using is catching engine exhaust on launch and willcause cavitation. The prop you are using are usually found on inboards such as Nautiques. Get a 17 pitch prop to start.. 15 is quick out of the hole, 19 higher top end, 17 middleish for a 150 engine.. and watch your RPMs
And lower the motor a bit.....thats an AWFULLY big roost, lol
I believe the motor he’s using is a thru hub exhaust which means the exhaust has to go the the prop 😂
@@jamesstarling7273 Very similar motor to mine and yes Exhaust most likely goes through the hub. LOL
I think in terms of this challenge he has no money left to change anything
He has that extra merc Laser prop that came with the boat, it is a through hub prop, the chopper he is running is an over hub exhaust which are known to cavitate out of the hole, plus with two people that motor doesn't sound like it is turning more than 5000 rpm. If he switches props he'll gain a ton of acceleration & probably pick up some mph because the motor will get into it's powerband.
James's budget seems never ending every time he puts the couple dollars he has left in his pocket they multiply.
That's the magic of a good mechanic!
@@nightlike9006 my brother the same way. He will buy one for 1000 fix it and trade it off for two more cars or enough to buy a couple more easy fixers. He'll turn 1,500 into 5,000 in a week maybe less
@@jhawk1985 what kind of cars does he go for? I've been looking at Toyotas and Hondas
@@jaynikk758 civics and accords
@@jaynikk758 he dont descriminate. If its an easy fixer and he can make a few dollars. Stay away from German cars except VW some of those cars are easy fixers too. He usually buys and fixes cars to help out the less fortunate folks buy a descent runner. He owns his own shop too so he fixes their cars when problems arise
I had a boat with a 632 big block a few years with nitrous and it was nothing but problems because it sat more than i had it out. I wont ever get another boat. They sure are fun though.
I really wish James would just leave the water valves closed. That thing would run so much better!
Ya with them not going out the bottom and back why does it need water valves? I don't get it. Big blocks run open headers in cars all the time!
The water is to cool the engine. From what I understand it is like the radiator but circulates the lake water in instead of a closed radiator system.
@@brianclark785 the inside is still water cooled the valves in question are to keep the headers cool if they were still pretty lol..that ship has sailed so it is no longer needed.
The cooling system on his boat looks like it was a budget build. Should have a pressure regulator to regulate the water pressure coming off the drive into the engine, and a proper setup has valves that go to the headers that shut themselves at idle, and will open at speed.
Been wondering about all that. The jet boat I almost bought this spring didn't have that setup. Had me curious cause imma find me a jetboat! This deal is making me want one more
James got the coolest, most rowdy boat, but LS George his boat might be overall the best choice. The Flamingo is cool too and runs pretty fast.
Um nope. I'll talk a open header screaming tunnel hull V8 paint chevy mother focking red any day
I feel like a lot of James' problems could have been solved by just keeping the header water turned off. It is just there to keep the chrome cool and looking nice, and his have no chrome to keep looking nice.
And a Visit with Finagen Would Be the shit , Game Over is sick..
They should race the red rocket against game over hahaha
@@stevenlaxton3618 jackstand gon have to "borrow" toasts old 632
I absolutely love James' boat, but Georges is def the most reliable and most sorted out of all of em.
Cleetus just doesn’t know how to drive or set up a boat. His jack plate is set too high for drag racing, but it’s good for top speed. If he had a power jackplate, and knew how to trim it on the fly, he would have walked the jet. The engine was too high for the turns or launching. Also, that engine has been set up for you to start it in gear. Performance outboards idle a little high and don’t like to shift. That’s the reason he blew reverse. The only reason he didn’t win is because he doesn’t know how to set it up or drive it.
how can you not love a bright red boat with a small block in it? despite all the issues, its still my favorite
Hey Cleet, I'm not sure if you do this already, but if you don't, I'll tell ya'. It's always a good idea to use compressed air to blow all the water out of the boats' cooling systems A.S.A.P. after getting them out of the water, just to help reduce corrosion.
Or just hook it up to muffs for 30 seconds
Naa just flush them with salt away or fresh water. Metal does not oxidize with out air
We always hook them up to freshwater (water hose) and run them for 5-10 minutes.
@@matmuffin1 As I stated in my original comment, I'm more concerned with corrosion than oxidization.
@@joshkamp7499 Never done that before, I just stick my gasoline powered air compressor in the trunk.
The shit talking has officially leveled up nearly to Hoonigan levels. I am HERE FOR IT
Good honest mates trash talk
@@kenleach2516 yessir they do!
James is by far the next funniest to cleet . Y’all were made to be bros🤘🏼🇺🇸
Just imagine how fast James's boat would be in the drag race with it running clean the entire run that thing is a beast but just imagine it at full running potential it's from the 80s and it would give all boats a run
Imagine if once this challenge is all over, Jackstand throws the motor that was in Toast in there. 😂😂
It would run 7s in the quarter if that happened
Bad hull to do that
I was just thinking that too
Man it is awesome watching jack stand and George heckle each other that looked like such a good time
I lost a water pump/alternator belt on a 43’ America's Schooner Cup entry half way from Marina Del Rey (near LAX) to Point Loma (San Diego). With strong on shore currents an no wind. The owner tried to make a belt out of electrical wire and duct tape linearly wound. Which failed almost instantly. I took the wire and braided it and spirally wound it with duct tape. That worked for over two hours and we used it to stay away from shore and meet the harbor patrol/ boat AAA mid way from San Diego. It may have made it all the way.
Yeah man it’s surprising what will work when you have no other way. Glad you guys made it home alright
Ahh ok cool thanks for that info 👍 I'm really glad to add that to my library of knowledge
Someone needs to teach James that you don't have to have the header water on, FInnegan's boats don't have water in the exhaust. Just keep it turned off. All the water does is silence the exhaust and keep the headers cool.. who cares if they get a little warm.
Exhaust Water may increase cylinder scavenging - ?? is there any need in this "Pack" - no real competition - if it runs.
@@kadmow he's shown in the previous video working on it that he had to retune the carb because the water kept flowing back in the head and killing the engine. There's absolutely no reason to have it on. Just turn it off and tune the carb like normal.
Also the primary and secondary float vents have that weird bridge that goes between them. That's not right. They should flow to open air. Normally a marine float vent has a 180* bend to overflow back into the carb.
@@pw383426 if you look close it's spark plug boots and a piece of tubing to mimic the marine/offroad carbs so that it doesn't overflow.. I'm sure James made it himself.
Please do more boat uploads they are so fun to watch I feel like everyone would love some more boat uploads like these. Well done love the content.
I clicked off the bad friends podcast channel so fast for this that Bobby Lee got whiplash 🇺🇸 Absolutely my favorite challenge video by 1776 bald eagle lengths 🇺🇸
@@rustincole_w1339 Seriously one of the greatest songs ever created 🤣🤣 Rip Bobby’s dad and Jack Stands boat🇺🇸
That extra point for towing shoulda came from James' score lol
Hundred percent agree
James' boat sounds exactly like a proper 1970s racecar should IMO. What a sound!