I’m so glad kits like this are finally being made. I still remember when EL neon wire was first sold over 4-5yrs ago but not until recently they started making kits that actually sync together and can have multiple power locations
Ordered mine yesterday from a different vendor with better price. The main module can control up to 20 sub controllers. Actually you didn't have to wire the sub modules through door boot then to accessory fuse. You could have got power from the door harness itself. Reason theyre wireless sub controllers. You can order extra modules and led strips for rear area. One sub controller can input 2 led strips and 2 light sources (door bowl/handle/feet light etc). Wicked the main can control 20 sub controllers.
@@sniperking305 Buy yourself a multimeter, you can see what wires supply 12v with and without acc (ignition on, ignition off etc). Its very simple, and only costs about $10 for a basic one.
I have just installed on my Jeep Grand Cherokee. Absolutely love this kit. This was my first project so I learned a few things. 1. You might not be able to tap into existing wires/harnesses in newer car models, since to ECU monitors power through all wires of the car 2. Be very careful with interior curves, the LED strips, are not great with linear curves 3. All modules connect wirelessly to one another. However, these all can be powered through one source 9-16v (parallel circuit).
@@Omar-dq3bkMy Jeep GC is a 2015 Limited. The install requires a bit of patience and knowledge for removing Jeep’s interior panels. Tedious but easy job if you know what you’re doing. RUclips/Reddit is always a great help if you ever get stuck on how to remove any specific panel.
So I installed those on my e92, looks very good. If any of you considering to do this to e92 I have a tip, so basically you dont need to feed the cable from the door to the fuse box, its wireless controllers, All I did I connected cables to the original orange ambient light cables that my e92 had. Also another tip, if you do not want to drill big hole to feed the ambient light in door, you can drill very small hole, what I did was, i took my ambient light to a local phone repair shop and asked them to dissasemble the red connector, they did it That way that after disassembly I can just put back pins easily, so I drilled a very small hole and put the cables one buy one, and after I just connected those cables back, maybe sounds complicated but its very easy trust me. I was very confused with everything at first , because it was my first time doing such a thing, so if you have questions you can ask in the comments and I can try to answer to you :)
@@coolissimo69 Yes, but I was figuring everything out because it was my first time, If I will install it again in one of my friends car I will definitely do a video :) Anyways if you have questions you can ask here I will try to answer ;)
hey bro i have a few questions, because i want do install it on my e93. 1. where did you get power from, because i only have 1 12V in the center console and reaching it without looking ugly or drilling isnt possible 2. how did you connect the back footlights an back lightstrips, and is there somewhere a power cable i can connect to? 3. you said you connected yours in the door to the serial ambient light poweroutlet, i dont have them, do you think i can connect them to the window ? 4. i ordered the kit with 75cm lenght for the doors, is this enough for the pretty long e92/93 doors, does it still look good? ill be very grateful if you could help me out
Hi Aziz, could you leave an update with how the lights have held up? I am gearing towards these, but if you could post a follow-up video, that would be much appreciated.
Great video, nice examples and tips to install. Looks easy to do. Two questions for you, did you get the 18-in-1 kit or 20-in-1? Also is there a music/sound sync option?
@@Azizdesign_ don't see a link for this product to buy on a U.S. website. Can you provide or can you just give me the full name of the product so I can look it up myself
@@Azizdesign_ I recently just installed my 18 in 1 kit bro but I held off on the handle lamps and floor lamps I have a question for you if I wanted to add more strips of light do you think I can just buy their led strip without the control box? Or should I just buy a 10 in 1 and have 2 main boxes
With this kit when you first turn on the car is there any start-up animation with the lights? For example like flashing red, green, blue or rainbow effect before it finally settles on the previous set color?
Installation varies for each car, all u need to do is connect the power wire to the fuse box, attach the ground, hide wires, and fit the fiber optic beams
Aziz, I so enjoyed your introduction to your video. It caught my attention & I watched with interest. But alas, I'm afraid of making a cockup when affixing the ambient lighting to my car. However, thanks for sharing the finished product in your car.
Appreciate your kind words! And apologies for not making a more in-depth tutorial. Reason for not doing so is because it installation varies on every car
Hello, I have a question - can we connect those Symphony LED's as negative pole to the car housing in two doors. In my car it seems that in front doors we have positive and negative cables, but on the other hand in back doors we do not have them (there is only positive cable). So thats the question, is there any risk in matter of connecting back door symphony lighting to the car ground which woduld not go straight from the negative cables? Any help appreciated, Thanks!
@@Azizdesign_ Thanks for reply, but one more question - if after connecting LED's as I described, there is no other option than connection to the car chasis "which should be ground". My questions are motivated by the fact, that in instruction for the Symphony kit, they are writing as follows: "taking negative pole from the chasis is prohibited"... Thats why I am a little bit confused :P
This looks sick! How are they powered (both the main and the sub units)--from the looks of it, the doors aren't wired into the main cabin, so how are those powered? Fuse box? Cig Lighter? Any insight so I know what I'll be getting myself into lol
Thank you, the main control unit is power by the fuse box (u just put the fuse they give u in one of the empty slots)and then for the doors, you would tap into any existing power wire
happy you installed on a BMW so I can see how it would look on mine. two questions. does it still look good and how hard would the install be for an amature. example, I DIY install the Pemp head unit no problem.
why he waveing his hands around like a crazy person :P So will it automatically turn on when the ignition is orrr is that a seting or how does it work ? Where do you draw the power from ? You could have put the on / off button in a little better place in front of the gear stick !
Love your work can you please show a full tutorial how to install ambient lights on a E class w212 2015 on the current ambient lights places (doors, dashboard) Thanks you
I just saw a youtube short of a Porsche that has a kit with what looks to be addressable LED they were changing rainbow color, it was amazing, also what app does it use, hopefully not symphony light app because it hat app doesn't work
Awesome. I just put in some non changing el wire and changeable floor lighting with an deep blue overhead door light. I also had reflective tape on the outside, but my Dad made me pull that off 😭.
I really thought these were going to be the Type 2 or Type S brand car lights. I just have basic Govee lights since I have those smart lights in my home as well. I haven’t taped any of the 4 strips down yet because really don’t know where to put 2 others since I have a true little coupe roadster. But I really want to do lighting like this in the trim but my car is brand new and don’t know about splitting the trims but does look really good and OEM style
yes it can! you will notice when you cut it, the end of it might change color. That is because there's alot of small tiny leds in the strip. In order to fix this, you just cut a little more so that it reforms to its original color.
Working on a car outside in the middle of winter ..... you guys are twice the man I am ....😂
Outside his garage, In the snow too 😂
I’m so glad kits like this are finally being made. I still remember when EL neon wire was first sold over 4-5yrs ago but not until recently they started making kits that actually sync together and can have multiple power locations
Agreed!
Street Glow (Fast & Furious Neon Underbody glow tubes ) made this EL WIRE in the 1990’s its old tech but very effective.
Same I'm upgrading my el wire kit to this one. (El wire transformator blew up 😳)
@@Azizdesign_ hello, can you or someone tell me : How to connect the sub box'es to my car's doors?
Ordered mine yesterday from a different vendor with better price. The main module can control up to 20 sub controllers. Actually you didn't have to wire the sub modules through door boot then to accessory fuse. You could have got power from the door harness itself. Reason theyre wireless sub controllers. You can order extra modules and led strips for rear area. One sub controller can input 2 led strips and 2 light sources (door bowl/handle/feet light etc). Wicked the main can control 20 sub controllers.
Hey could you provide the link to the kit you ordered? And how can you order more of the sub modules along with strips?
where did u get them cheaper?
Which wire did you tap into for the door ones
sharing is cairing.
@@sniperking305 Buy yourself a multimeter, you can see what wires supply 12v with and without acc (ignition on, ignition off etc).
Its very simple, and only costs about $10 for a basic one.
I have just installed on my Jeep Grand Cherokee. Absolutely love this kit. This was my first project so I learned a few things.
1. You might not be able to tap into existing wires/harnesses in newer car models, since to ECU monitors power through all wires of the car
2. Be very careful with interior curves, the LED strips, are not great with linear curves
3. All modules connect wirelessly to one another. However, these all can be powered through one source 9-16v (parallel circuit).
Hey just wondering what model grand Cherokee did you install these in?
And how was the installation process?
I had the same question. I was thinking about doing this on my first truck. 2014 Jeep Cherokee
What year ?
Yoooo can I see what it looks like? I have an 11 Overland and I'm thinking about doing this.
@@Omar-dq3bkMy Jeep GC is a 2015 Limited. The install requires a bit of patience and knowledge for removing Jeep’s interior panels. Tedious but easy job if you know what you’re doing. RUclips/Reddit is always a great help if you ever get stuck on how to remove any specific panel.
Detailed installation video needed😢
fax
Need this
Yep we need this
Yes
Yupppp
Thanks for this video. I have leds in my car but this kit is sick. I can't wait until it ships thanks again!
So I installed those on my e92, looks very good. If any of you considering to do this to e92 I have a tip, so basically you dont need to feed the cable from the door to the fuse box, its wireless controllers, All I did I connected cables to the original orange ambient light cables that my e92 had. Also another tip, if you do not want to drill big hole to feed the ambient light in door, you can drill very small hole, what I did was, i took my ambient light to a local phone repair shop and asked them to dissasemble the red connector, they did it That way that after disassembly I can just put back pins easily, so I drilled a very small hole and put the cables one buy one, and after I just connected those cables back, maybe sounds complicated but its very easy trust me. I was very confused with everything at first , because it was my first time doing such a thing, so if you have questions you can ask in the comments and I can try to answer to you :)
thanks great tip, you could have done a video of your installation.
@@coolissimo69 Yes, but I was figuring everything out because it was my first time, If I will install it again in one of my friends car I will definitely do a video :) Anyways if you have questions you can ask here I will try to answer ;)
@@bazaras2520 thanks will do that mate.
Where did you connect the main controller?
hey bro i have a few questions, because i want do install it on my e93.
1. where did you get power from, because i only have 1 12V in the center console and reaching it without looking ugly or drilling isnt possible
2. how did you connect the back footlights an back lightstrips, and is there somewhere a power cable i can connect to?
3. you said you connected yours in the door to the serial ambient light poweroutlet, i dont have them, do you think i can connect them to the window ?
4. i ordered the kit with 75cm lenght for the doors, is this enough for the pretty long e92/93 doors, does it still look good?
ill be very grateful if you could help me out
I think I am missing something what is the make and model of this kit it looks brilliant Bear Hull UK
It’s a universal kit which works on any car. The link is in my bio
What a season, what a car and what an amazing implementation. Thoroughly Enjoyed It 👍
@@sabithpkcmnr thank you 🙏🏽
How much were they what website they look fantastic good job
Link in bio
Looks nice, but I would always keep it in a low light, light blue setting to match factory color of my F-150. I like that OEM look.
Credit for doing this in the middle of winter in the cold. I would wait til spring. 😀
soft
Was totally thinking Tron, as well! Looks awesome!
Can you do a detailed installation video please ?
Yes, Please
So how is this system holding up for those who have installed it...? Any problems...?
fire vid . what song is playing at the end ?
Hi Aziz, could you leave an update with how the lights have held up? I am gearing towards these, but if you could post a follow-up video, that would be much appreciated.
It’s been a year, so far so good. Coming out with a detailed video shortly
@@Azizdesign_ thank you. I appreciate it.
Very nice, but the link is not working for me could you update it?
The kit can be found here: azizdesignshop.ca/
Is it bright enough to see in the day time?
Absolutely
i really want to know if this one on first power does some stupid start animation or if it just reverts to the last chosen colour, thanks!
Nope it doesnt!
Great video, nice examples and tips to install. Looks easy to do. Two questions for you, did you get the 18-in-1 kit or 20-in-1? Also is there a music/sound sync option?
Thank you. I got the 18 in 1 kit, and yes there is a music option i believe but its not as good as i thought it would be
@@Azizdesign_ Any way we can get a RUclips short or video of the example? Thank you, bro! 🙏
Bro u need the gopro chest attachment have to adnit that looks really freaking good im gonna order for sure!
haha that wouldn't be such a bad Idea
do you have a link to buy in the u.s. or the name of the product?
the link is in the description
@@Azizdesign_ don't see a link for this product to buy on a U.S. website. Can you provide or can you just give me the full name of the product so I can look it up myself
I was wondering how it was wired thanks alot
Check my latest video
Isn't there an extension to the rear as well?
There is, i decided to leave the rear as is.
Great video! as i prepare to move from Ontario to Alberta i realize now just how much its gonna suck to do car project stuff in winter
Thanks dave, and yes definitely worth investing in a garage heater!
Hey bro did you notice the driver side foot section is a different color from the passenger?
Haha yes
@@Azizdesign_ I recently just installed my 18 in 1 kit bro but I held off on the handle lamps and floor lamps I have a question for you if I wanted to add more strips of light do you think I can just buy their led strip without the control box? Or should I just buy a 10 in 1 and have 2 main boxes
@@lifewithjulez32 shoot me a dm on IG i might be able to get you just the strips alone.
u should change thee bulb behind your dash to match
What are the two songs called at the beginning and at the end?
Just ordered this for my E92 , is there any chance you could do a more detailed install Vid?
Hey jason, shoot me a dm on instagram if you need help with the installation
thanks, is the link to the kit still available on aliexpress?
Yes check video description
With this kit when you first turn on the car is there any start-up animation with the lights? For example like flashing red, green, blue or rainbow effect before it finally settles on the previous set color?
No animation nope
@@Azizdesign_ thanks!
Can you do a detailed installation video? It would help a bunch!
check my latest videos
Can the brightness be controlled? I have liked the progression of the kits you have used.
Yes ofcourse! brightness is controlled via the app. In many clips of the video, we had it on its brightest setting
when the light is dimmer, isn't the light stronger at the feed and ends?
@@marjaizoltangraphicdesigne7887 nope
thanks for the explanation and the good video, but the only thing i didnt understand is, why didnt you install the lightning kit in your garage :D ?
I like the idea and what it can do - what you charge to install one - Edmonton here
Could you post a full install for those that want to do it themselves and not have to 0ay someone to do it
Installation varies for each car, all u need to do is connect the power wire to the fuse box, attach the ground, hide wires, and fit the fiber optic beams
@@Azizdesign_ thank you i can’t wait for them to get here
@@aramis762 No problem. Happy to help!
@@Azizdesign_ how exactly do you connect to the fusebox? are there empty entries that you can insert and then add a fuse?
@@fontexstudios yes exactly! you should be able to find many open fuse slots which can be used. Nearly every car has them
What about different light in the footwell - green. Have you managed to fix this?
I alibaba and Amazon I don't see the one you are showing in the video
Check link in the description
The early 2000s are back
Could you update the link please :)?
The kit can be found here: azizdesignshop.ca/
Hey bro I’m from suburbs of chicago and it looks like you are too. I want to do this to my jeep is there anyway you would do this as a service?
Sorry man im based out of canada actually
Outro song is 'Sun Up' by Adroithood, but I can't find your instrumental remix. Got a link??
Cassie - me & u wtchcraft remix sped up
@@Azizdesign_ Nah not the intro song, the outtro haha. When you guys are holding the selfie stick and drifting in the snow. It's definitely "Sun Up"
Aziz, I so enjoyed your introduction to your video. It caught my attention & I watched with interest. But alas, I'm afraid of making a cockup when affixing the ambient lighting to my car. However, thanks for sharing the finished product in your car.
Appreciate your kind words! And apologies for not making a more in-depth tutorial. Reason for not doing so is because it installation varies on every car
can I install without taking the door off? lol I don't know really know how to do these things.
Haha unfortunately not, if you want to do the doors then you must remove the plastics
TRON MOVIE!! 😂😂😂
I have a 2023 Kia Forte GT-Line can this be done it as well ?
Yep, its a universal kit
@@Azizdesign_ dopeeeee I would just have to find someone to install it after I order
Another great video it looks awesome where can I purchase one at thanks for your time keep up the good work
Thank you boss, link is in the bio :)
de donde sacaste los 12 voltios
The link in the video description is broken. Does anybody have the name of the product or a link where I can find it? Thanks
Try a different browser, it should still work
@@Azizdesign_ tried multiple browsers. said it cannot be found
shoot me a dm on IG@@lexbowen7541
Hello, I have a question - can we connect those Symphony LED's as negative pole to the car housing in two doors. In my car it seems that in front doors we have positive and negative cables, but on the other hand in back doors we do not have them (there is only positive cable). So thats the question, is there any risk in matter of connecting back door symphony lighting to the car ground which woduld not go straight from the negative cables? Any help appreciated, Thanks!
It should not matter, as long as its a ground ur ok. What does matter is getting 12v for the positive wire
@@Azizdesign_ Thanks for reply, but one more question - if after connecting LED's as I described, there is no other option than connection to the car chasis "which should be ground". My questions are motivated by the fact, that in instruction for the Symphony kit, they are writing as follows: "taking negative pole from the chasis is prohibited"... Thats why I am a little bit confused :P
Hi! My only question is where did you connect both doors? Main control box is in fuse box, but what about 2 control boxes for doors?
This looks sick! How are they powered (both the main and the sub units)--from the looks of it, the doors aren't wired into the main cabin, so how are those powered? Fuse box? Cig Lighter? Any insight so I know what I'll be getting myself into lol
Thank you, the main control unit is power by the fuse box (u just put the fuse they give u in one of the empty slots)and then for the doors, you would tap into any existing power wire
My suprise ! Is your doing it while snowing my respect never stop the grind
happy you installed on a BMW so I can see how it would look on mine. two questions. does it still look good and how hard would the install be for an amature. example, I DIY install the Pemp head unit no problem.
Yep, still looks great. It’s not terribly hard to install, just some patience and time
does the whole kit run on 12 volts?
Correct
Bro you need to make another video asap I bought these and now I don’t know what to do cause this video has 0 details just random clips
Message me on instagram and i’ll try to help
What's the name of the kit.and were do l . purchase it.
link is in the bio
why he waveing his hands around like a crazy person :P
So will it automatically turn on when the ignition is orrr is that a seting or how does it work ?
Where do you draw the power from ?
You could have put the on / off button in a little better place in front of the gear stick !
is it easy to install strip on the doors?
The doors are easy, hardest part is feeding wire through the door hinge into the cabin.
@@Azizdesign_ sorry one more question did you find out what the remote m&s buttons do?
@@rickangel7514 check my latest video, it explains it
would i need to purchase the kit twice since i have an e90 not an e92 like you boss? thanks
Does lights remember last selected color/brightness combination, or do I have to reselect every time I start the car?
It remembers the last setting yes. No need to keep readjusting
I dont see a place to put your code when i go to purchase. Is there something i need to do?
Love your work
can you please show a full tutorial how to install ambient lights on a E class w212 2015 on the current ambient lights places (doors, dashboard) Thanks you
Thank you, yes I will consider it for a future video
WHAT COLOUR IS THE LIVE WIRE??????????
Do you know if they have a kit for a 09 chevrolet avalanche, if so where can I buy this kit got to have it
Kevin, this is a universal kit it should work with nearly every car
Great 👍 so I would like to purchase the 18-1 set where can I purchase
@@kevinalmore1892 link is in the description
I just saw a youtube short of a Porsche that has a kit with what looks to be addressable LED
they were changing rainbow color, it was amazing,
also what app does it use, hopefully not symphony light app because it hat app doesn't work
Can someone tell me ; How to connect the sub boxe's to my car's power source?
how did you tape it into the fuse box?
Where can I order this kit? I need it for my 2017 impala
Links in the bio
Song please
Would you be able to lower the brightness ?
yes you can
Does this kit come with voice command?
Unfortunately no
do you habe a new link, because the link in the description is gone
Is this the 1 in 18 or 1 in 6 kit?
@@blazesmooth5573 this is the 18in1
Please drop the name of intro music , bro !
cassie - me&u wtchcrft remix [sped up]
Do you notice nighttime glare for the lights on the windows?
Yes, only if its at its brightest setting otherwise its fine!
I wanted to order them today but the link aint working, What is the name of the product on the side itself and the manifaktue namen. PLS some help
The kit can be found here: azizdesignshop.ca/
Can it easily be moulded around bends. I’ve found with some kids they don’t bend very well and end up popping out.
It cant bend 30 degrees max, anything more and it would crack the plastic housing. Also if you stick it in well enough, it won’t pop out
the best one in my opinion are the symphony ambient light kit. its the same as this but got some more cool effects
Link?
link? amazon? brand name? price?
Link?
Sorry for the late reply! Check the description in my ambient light kit video. Link will be there !
Can you dim the lights ?
Yep!
@@Azizdesign_ I ordered them today! I'm praying a toyota dealership will install them for me. 🤞
@@CajunAdrienne message me on instagram and i’ll my best to help you
@@Azizdesign_ did you ship my lights? Does it take long to ship?I haven't received them yet.
@@CajunAdrienne shoot me a dm on instagram and we can have a look
Where did u pull the power from the center dash ?
But the size of the strip by door is already pre-cut or did you make it that size?
We had to cut the strip to make it the size we desired. Otherwise it was too long.
@@Azizdesign_ hello my question is once you cut the cords how do they still connect from the main black cord that plugs in to cigarette lighter ?
@@lilc707 because one side of the light is connected to the wires, whereas the other side is not
bro dedicated fr fr 🙏🏽
Thanks brotha 😎
Awesome. I just put in some non changing el wire and changeable floor lighting with an deep blue overhead door light. I also had reflective tape on the outside, but my Dad made me pull that off 😭.
I really thought these were going to be the Type 2 or Type S brand car lights. I just have basic Govee lights since I have those smart lights in my home as well. I haven’t taped any of the 4 strips down yet because really don’t know where to put 2 others since I have a true little coupe roadster. But I really want to do lighting like this in the trim but my car is brand new and don’t know about splitting the trims but does look really good and OEM style
Do the lights just turn on when the car gets turned on/unlocked, or does it have an animaton
WHERE IS THE LINK? I WANT TO BUY THIS KIT
Link in bio
Do you happen to have the name of the app.. to control the lights vea smartphone (Android) as mine came in with no instructions
I-AT LAMP
What would be the price to install?
Depends on your local shop rates, good install takes 4-6 hours
@@Azizdesign_ yeah..was curious estimately how much would cost if anyone knows.
Do you know something of similar quality and complexity for F30?
This is a universal kit, it should fit in almost any vehicle, but you have to get a little creative
I can't find the link can you let us know where to buy the kit
Hey, link is in the bio
I would think it might get annoying so bright.. when dimmed down is there still ZERO hotspots??
Yes absolutely zero hotspots! Even at its lowest setting
Looks 🔥 bro ! My lexus is300 needs this
Does it come with enough fiber optic cables to also run those cables through the back doors as well? Will this even be possible?
make sure to buy the 5 piece kit if you plan on doing the rears aswell.
Can’t believe you’re just installing this in the snow bro. Couldn’t you have found like somewhere undercover ahah
can this be cut at any length? I might want to run this on my supra
yes it can! you will notice when you cut it, the end of it might change color. That is because there's alot of small tiny leds in the strip. In order to fix this, you just cut a little more so that it reforms to its original color.
I have a infinity q50 and I don’t know what size it is
You did not tell what the 2 buttons of the remote do..?😅
Sorry! They are used to turn it on/off and change the colors
what’s the name of the kit and where can i get it
link in the bio