Hey beast SP it works for me but when I applied it to my aircraft gunship when I turn too far I can’t see the turret making it harder to aim how can I fix it?
Thanks, if you have something interesting, you can contact me somewhere. I'm actually not a good sp player in building, but im interested in funky trees, xml, and other features
@@BeastSp ok. I put all the right codes but the thing that only happens is it only goes left and right. And I watched your vid again And it still goes left and right. It doesn't turn up and down too. And I tried alot of times it still not works.
@@jmarkushcjyucor9713 then try to copy Y rotator setting and set them for X rotator and match variables. I think you probably set your X rotator with "Look Roll" variable and not woth "Look Yaw"
@@razka2407 put a regular router on the side set the invert on true and copy this"inverselerp(0,90,TargetElevation + (rate(TargetElevation) * (TargetDistance / 1700)))" and put it in the input that should work
I have a problem, when I done writing the code when I click save it say 'Valriables Error: Name not defind:y'can you please figure it out what's the problem is?
You wrote your variables in variable setter probably, but you don't need to use it. 1) place camera, looking at it open tab with reverse symbol 2) at the very top there is [(X)] button, open it 3) There is look Pitch and look Yaw 4) name variables for these 5) use variables in your rotator If it don't work send me your discord, WhatsApp, or telegram
great vid, imagine playin sp2 with bombers that have this type of turrets. I can't wait
Same, sp 2 would be so good
My pc is weaker than my phone so i never will play simpleplanes 2
Also, it's not only / 90. If your rotator is, for example, 20° you should insert (variable) / 20
Thank you my mate... It works
Its working perfectly thank you
Thanks bro, I made a rear turret for my heavy bomber.
When i first learnt this thing i used it in a plane too, by the way
Its not working for me it says in the variable y is undefined and x is undefined. What should i do😢
1:48 this is where your variables are, their name should match
Does it also work with the orbit camera?
I tried but no probably
@@BeastSp I tried everything but only hinge rotator work what do I do?
Amazing.
Hey beast SP it works for me but when I applied it to my aircraft gunship when I turn too far I can’t see the turret making it harder to aim how can I fix it?
thanks so much, keep up the work!
Thanks, if you have something interesting, you can contact me somewhere. I'm actually not a good sp player in building, but im interested in funky trees, xml, and other features
Thanks now I can make an Ciws
ty for this i even made a missile version of it
Can you post a tutorial video for that?
So, i connected the camera to a separate area of the aircraft and input all the variables. The turret will not move still.
@@ShushnSilver check connections of turret. Make sure there is no parts that should move are connected to static parts
Thanks bro
i see，it s so simple
I did all the instructions but the camera has a bug when i move the camera the turret move further what should i do?
You probably need to divide your variable by max angle of motion in rotator. X / angle of motion of rotator
Ok Thanks.
Edit: when I move the camera the turret moves slower which makes the camera moves faster even if inverted l
totally the ting that I needed
Thanks
Ну вот, написал как ты и говорил :)
Хорош
Una pregunta como aumento la potencia de los motores??
Do you need torque or speed? Torque can't be changed
Hey it won't go up and down😢
Channel owner why when I try to introduce this system inside a tank it doesn't work please help me
@@VecnaDeTouca what exactly does not work
I put this system on a T90 tank and the only thing that happened was that the turret didn't move. Thanks.
@@VecnaDeTouca check connections of turret or match variables if they don't match
I put the command on the tank rotator@@BeastSp
Whenever I install a vehicle and try to modify it this way it never works.
Why me when make this the rotator so slow and the rotator weapon super slow can you explain this??
Did you change the speed in it? Or if it isn't enough, change speed in xml to speed ypu want
My motor doesn't turn at all on the x value
I dont know, maybe variable names are not same or block connected to rotator also connected to something immovable
thank you
Do i can do this with multiple turrets for my blackmoth
@@ДИРИЖАБЛЬ22852 да
@BeastSp почему эдитор не принимает y как команду
It only goes left and right. Not left, right up and down
Can you explain it more detailed
@@BeastSp ok. I put all the right codes but the thing that only happens is it only goes left and right. And I watched your vid again And it still goes left and right. It doesn't turn up and down too. And I tried alot of times it still not works.
А что это за две кнопки дополнительные снизу справа? Я их не могу найти (не бейте тапком, я недавно игрц скачал)
В главном меню есть папка для модов. Там они изначально установлены (по крайней мере на мобиле)
@@BeastSp спасибо огромное
Спасибо большое за туториал, я всё сделал, и пушка сработала. Удачи в развитии канала@@BeastSp
@@LS_Kor_g1eee спасибо
my dumb self cannot memorize the stuff can you give the plane so i can get the sub assemblies?
Ok i will do it
www.simpleplanes.com/a/ovZ8x5/camera-guided-by-camera-sub-assembly
holy moly, thank you 🙏 this is my alt.
do you know if it will work on pc?
@@dirtylaundry00. Ofc it will
I tried to do the same thing to the rotator as you did but nothing happens when I look left or right, only the hinge rotator works
Check connections
@@BeastSp okay thanks
How did you get to Camera Vantage
@@dragoaviation select camera, then part properties and the button on the top is camera vantage variables
I followed the instructions but the main rotater isnt moving even tho i followed the tutorial
@@jmarkushcjyucor9713 make sure variables are same, also it probably doesn't work on orbit camera (haven't tested)
@@BeastSp i did use the same variables somehow its not working
@@BeastSpWait somehow the Y variable only works on the rotators but not the x can you like tell me why?
@@jmarkushcjyucor9713 then try to copy Y rotator setting and set them for X rotator and match variables. I think you probably set your X rotator with "Look Roll" variable and not woth "Look Yaw"
@@BeastSp but it is at look roll
Hey how to use first person i tried every thing nothing work😢😢😢
Do you have eye symbol bottom right when you start the game ?
@@BeastSp lol that was me when I started playing the game
@@BeastSp I didn't see the eye at first
Hey,why my cameras move 90° but the rotator doesnt move to 90° and stop at 45°?
If your rotator have max angle 360 you should do x/360, you have probably mistaken here
why doesn't work for me? I'm trying to make a tail turrent for my bomber
@@KianblainePascua well you need to know what doesn't work exactly
I've tried it but when I try it, I look to the south while the cannon is to the west. What should I do?😢😢
Do a little thing called
Invert true
Okay I will try
I've tried it but the cannon rotates further when I face a quarter to the left the cannon stays forward
@@razka2407 put a regular router on the side set the invert on true and copy this"inverselerp(0,90,TargetElevation + (rate(TargetElevation) * (TargetDistance / 1700)))" and put it in the input that should work
@@Daytodaysimpleplanesplayerokay I will try
I have a problem, when I done writing the code when I click save it say 'Valriables Error: Name not defind:y'can you please figure it out what's the problem is?
You wrote your variables in variable setter probably, but you don't need to use it.
1) place camera, looking at it open tab with reverse symbol
2) at the very top there is [(X)] button, open it
3) There is look Pitch and look Yaw
4) name variables for these
5) use variables in your rotator
If it don't work send me your discord, WhatsApp, or telegram
Ok thanks!
Why does the X axis not work for me the variables i put are correct
Can you post it on game's website?
Nah i finally figured it out the camera connection was just off
It only moves down and right
@@FrogAviation what do you mean
My game always do flight view how do I stop it? I don't have awnsers
You might gave little eye button at bottom right corner
I did everything Right But it doesnt Move.
@@darlanfreitas3309 then you did something wrong
Why does my camera have no variable
Maybe its old version or you didn't select the right part. And you need to write variable yourself
where is variable outputs
click the settings button selecting camera and the last button on the top (with X letter in the box) is variable outputs, set your own and use them
So basically the variable outputs button is located above the connection button when you select a block
@@BeastSp found it….that was a quick response 💀💀
Bro i think i broke the camera because there are no variables
Idk man, you probably have old version, or try to find "[(X)]" icon in the customise section with gear icon
Also make sure that you srlected camera not a random block
i have issues with this
@@praptiroy-vp6jt why
I put the variable right but it says name not defined
@@praptiroy-vp6jt can you send it? Telegram on Instagram maybe or just link on you're craft
Hey it won't go up and down😢
Did you set up your up and down rotators
Yeah I set it?
Ой, прости, братан, я забыл подключиться
@@chancealfienMatthewbruz чо