Forks being all the way in doesn't matter if the load is wrong in the first place. The machine he is using has a safe working weight requirement which has been exceeded. This is why you can see when he pumps the hydraulic Jack it won't go up. Even if it managed to go up and he was able to pull out the load would still be unsafe to move as it would be hanging to one side with no counterbalance meaning it could fall easily.
Dude even a motorized full size forklift would have a hard time lifting that. That's at least 3000-4000lbs pallet. These hand forklifts are design for small loads or even domestic use like moving or something.
Common sense doesn't prevail, load center was off you had to back up around 6 inches once lifted, go down and jack back up and that lifter has exceeded it's capacity for sure thats around a 2ton pallet
We tried this, says 2 ton lifting power but cant even lift a ton easily, it tips forward. We got in an accident and thanfully no one was hurt. Avoid this or use for very light loads. Buy a quality used or new forklift instead
Actualy you`ve learn not to use this Stacker model for more than 300 kg.. trust me i was trying the electric one and above the 300 Kg on the pallet you can`t do shit with it.
Forks being all the way in doesn't matter if the load is wrong in the first place. The machine he is using has a safe working weight requirement which has been exceeded. This is why you can see when he pumps the hydraulic Jack it won't go up. Even if it managed to go up and he was able to pull out the load would still be unsafe to move as it would be hanging to one side with no counterbalance meaning it could fall easily.
2:00
It's at this point he wished that his boss wasn't so stingy and purchased a (quality used) fork lift instead.
bingo!
He was grabbing 2 pallets at the same time. It was an easy solution, just backoff the pallet jack 3 inches and lift up again
How do you know its holding 2 pallets at the same time
Definate contender for a Darwin award
Nice video. :)
Dude even a motorized full size forklift would have a hard time lifting that. That's at least 3000-4000lbs pallet. These hand forklifts are design for small loads or even domestic use like moving or something.
plus to this the right angle feature is very important which is not available in the manual stackers.
This is a homeowner tool, for putting the Christmas decorations away up in the loft! You need a real forklift for that pallet!
저희도 트럭으로 입고되는 물량이 많아서 요것 사용해보니 바퀴 부분에 못들어가서 빠레트 부분이 ... 나머지는 딱 좋은데..
Dang dude you’re going to get hurt
hehe yes this is the reality. Stacker's own weight is to small for 1500 kg heavy load. It is ok for..lets say 500 kg.
Thanks for letting me know this is a piece of crap I shouldn't buy!! 🤣😂
Haha, overload
Why did it drop ? He acted like it poped a cork all by itself .
overload perhaps
so........... fail. thanks for sharing
His forks we're not all the in the pallet. Too much weight was forward anti needed to be centered.
Game over.
Overload
What the .......f...... he looks like master but....what the
Faiiilll
우연히 봤는데 자루가 10줄인거보니 파레트 무게가 2톤정도 되는거 같습니다.
당연히 1.5톤 수동스태커로 들기 힘들죠
억지로 힘들게 들지 말고 전동을 사세요
1,250kg
포대당 40kg인줄 알았는데 25kg였나보네요.
오래된 영상이지만 포크가 파레트에 다 들어가지 못하고 걸친상태로 들다보니 무게를 못드네요
한줄두줄정도 빼고 포크넣고 살짝 땡긴뒤 내려놓고 완전히 집어넣어야 될듯 싶네요
Common sense doesn't prevail, load center was off you had to back up around 6 inches once lifted, go down and jack back up and that lifter has exceeded it's capacity for sure thats around a 2ton pallet
😁
what the point to use it?
Hmmm, why would anyone even publish this video. I'm surprised that thing didn't just snap.
No lift? What happen 🤭
2 hour just alignment 😂😂😂😂
how about 1000kg???
1들고 2차를빼고 3내려서 4밀면 쉬울듯 합니다
들린상태에서 차를우찌빼요 다리발이 바퀴밑에있는데 ㅋㅋ
at least push forks all way in
We tried this, says 2 ton lifting power but cant even lift a ton easily, it tips forward. We got in an accident and thanfully no one was hurt. Avoid this or use for very light loads. Buy a quality used or new forklift instead
Like rolling palm trees . In sand . With pyramid blocks .
Looks possible on paper . But 10% know better
End game 😂
Man you better be glad you can't get that thing out it would have flipped over on you
كم سعر هذا المنتج
Center of the mass of the pallet is not at the right place. Those forks needs to stick to the pallet all the way
Ahahahaaaa.. ohh what a fail that was.
I don’t need my back 😖
La ce preț ie
over capacity
unusefull
😆
Should of named and shamed the brand
What a big FAIL.
Confusion
When all else fails..... fuck it and go to lunch.
Fucking hell, now I've seen it all🤣😂😆
right jesus
Not real smart!!!
Waisted my time
Actualy you`ve learn not to use this Stacker model for more than 300 kg.. trust me i was trying the electric one and above the 300 Kg on the pallet you can`t do shit with it.
LMAO!
Desculpa essa empilhadeira é pior que tem eu escrevi no seu canal aqui também tá bom dê um like mas essa empilhadeira aí é a pior que tem
Time means money. So give up on this machine.
I really think that up on this height and load for this manual folklift it will not work. Everything except is perfect
2 or 3 bags at a time with 2 guysdragging it out of the sunny gravel parking lot .
🤣🤣🤣
Why even upload the video? Lol
Drive away when it’s lifted.
You as well
the jack will just be pulled with the truck since its still touching
@@user-tr2dh4xx6u lift it high enough, and drive away
Then you are just stuck in a gravel parkinglot with skate board wheels on a 5200 pound pallet 🙁
Ассаламу алейкум
Менга дални адрес ва тел номер керак
전세계 지게차유저들 훈수두네 ㅋㅋ
뭐야 실패 영상이네 ㅋㅋㅋㅋ
ещё раз убедился, что это говно.
ايه ده الفشل
뭐하는교?
지게차 불러라.
lol
Lol
IN YOUR DREAM YOU CAN LIFT A HEAVY LOAD WITH THAT TINY HAND FORKLIFT.😆😂
PT. Denko Jakarta Distributor Resmi Stacker manual, semi Electric, Full Electric 0818681372
A shit pice of equipment, waist of time and money. Forklift would have it off the truck by now.
I think it is called a stacker .
We put a plywood board on one and cranked a bi g new air conditioner up level with a flat roof and slid it over .