IMPORTANT FOR AMD PROCESSORS - NOTE - For AMD processors add this additional line in the cmd - VBoxManage modifyvm "Mac 2 Trial" --cpu-profile "Intel Core i7-6700K" --------------------------------------------------------------------------------------------------------
thank you for the tutorial. i think what I'm missing is putting in this line, but where do I find the proper CPU profile, for example ryzen 5 2600? thank you :D
not sure if you will ever see this since this video is so old. but will imessage work on this? i have tried and tried but it wont connect, just freezes
For anyone sitting in a "boot loop" while installing it. Try reducing your processor amount to 2 (from half to 2). It helped me and hope you too. It would be installing and after a long while I whould see the VirtualBox logo pop up with no error code what so ever. So shut the machine down > go to settings and reduce the processors to 2.
Hi Sir, I just installed Mac OS in my PC for the first time of Mac in my life, now I can enjoy the journey with Mac ios from now on, Thanks a lot !!! you're the man:D
Thank you so much it actually worked been stuck on this for days and your the first person with an easy short understandable and simple video. You just gained another sub
This is by far the best tutorial for getting Mac OS in virtual machine out there in my opinion also the OS file contains no viruses or unwanted bloatware
@@EverythingDude5 just have one question when I load up the VM everything is fine except for I can’t get the internet to work and the refresh rate seems to be 30 or so. Any tips?
Ah man... A little disappointed. Not because this didn't work, IT DID! Its been the most successful tutorial I've had so far o thank you! My disappointments stem from why I wanted mac on my PC. To run Garageband. Unfortunately i cant instal it because i need mac version 12.3 or later. Highly appreciate the helpful video regardless but its something to consider for any other users who intend to try out some of Mac OS's dedicated software. Edit 1: Managed to find an older version that is actually downloading, will update this comment on results and information if anyone is interested to know. Edit 2: Alright, good news! it works. GarageBand loads up and seemingly works as normal. The bad news, it’s super slow (maybe this could be dependant on the PC specifications). For the most part the whole OS runs a little slower and laggy than the standard but the slowdowns crank up when using software intended for heavy ram use. My PC has 32gb ram (dual 16gb 3600mhz, CL16), RTX 2060, Ryzen 5 4600G. I allocated the max amount of everything I could. RAM is set to 24421 MB (I’ve tried 8000, 16000, 20000 and 24000 also and there’s not much difference in performance). I assigned it 6 cores (gonna try out 4 cores for the giggles now). The OS doesn’t recognise my focusrite or midi keyboard (with the correct drivers installed to the OS). I can use my computer keyboard to play notes. Sound unfortunately are subject to stutter and realistically speaking they are completely useless because of this. I tried watching a RUclips video, sound was okay for that but the pictures refresh rate wasn’t great. When I tried a RUclips video with GarageBand open; the sound crackling was there. Ultimately my computer isn’t good enough to run this smoothly. But the driver issues with the MIDI controller and audio interface were the biggest let down. No matter the speed, without those testing Playing instruments into GarageBand isn’t possible. Was a fun experiment though! EDIT 3. Okay… 4 cores works far better than 6! Not perfect, far less crackle but still not perfect. Far more stability for me using 4 cores. Potential final edit lol: tried recording using the better speed from using less cores, worked for 2 seconds then started getting funky and not in the musical sense!
@@willtaylor-young no worries, happy to help. I dont think a virtual machine is worth trying for anything other than getting linux running on another OS without all the ballache of installing/overwriting it fully. I'd recommend looking at a hackintosh instead of a VM if you're wanting to edit music. I think there's a way you can dual boot both windows and mac OS's from the BIOS... Dont quote me on that but its something you could look into. I'll probably get round to trying it eventually just not anytime soon.
I'm stuck on 2:13, I'm not seeing anything under preferences that says "extensions" or "add extensions" so I don't know what to do now. I'm not sure what I would be clicking on in that event, anyway...
guys if you get an error saying AMD-V is disabled in the BIOS and you use AMD processor its simple. Restart your laptop/desktop. Then, on the boot screen, press the BIOS key (F2, F4, F8, F10, F12, or the Del key) to enter into BIOS mode. The BIOS key may vary depending on computer models. But you can follow the on-screen instructions or search it online. In the BIOS interface, navigate to Advanced > CPU Configuration. In this tab, make sure the AMD-V or AMD SVM is enabled. The specific path and the virtualization technology name may vary depending on different BIOS versions. Press F10 to save the changes and then exit from BIOS. It may be difficult to find the settings but it should be there. somewhere in the advanced section
Great video! However, when I tried to start the VM, I got an error: Failed to query SMC Value from the host (VERR_INVALID_HANDLE). Any suggestions on how to handle this?
Someone posted a answer below: ADd this line to the command prompt VBoxManage.exe setextradata "Your macOS VM Name Here!!!" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
Thank you so much! Everything worked perfectly, but you need a newer version to be able to install apps from the store. Updating only gives me the "Package %@ is missing or invalid" after downloading for an hour. I tried looking for a solution but I cant seem to find one that works. How can I fix this?
Thank you men you are the best! It worked first Try and I did the AMD command thing because I have an Ryzen 5 3600 and that Worked fire Try too! thx Men :D
@@anasosama7063 Not using this guide, the issue is this guide doesnt work if you run AMD processor, only for intel processors. This is the link I used to finally install mac on my laptop ruclips.net/video/47O56JftzTA/видео.html
Can Anyone Please Help, I got into mac it loads fine but I cant drag any files inside my mac. Not even on the mac desktop or in the download folder. I need to drag a file in order to get in to what I'm trying to do. Can Someone Please Help and let me know why I cant drag any files within the macOS.
Can anyone help me when I enter cmd ad admin the second line of code does not work and I get this error: 'VBoxManage.exe' is not recognized as an internal or external command, operable program or batch file.
I did everything again and got the same error message, but I am not giving up. The virtual machine failed to boot. That might be caused by a missing operating system or a misconfigured boot order. Mounting an operating system install DVD might solve this problem. Selecting an ISO file will attempt to mount it after the dialog is closed.
Catalina OS doesn't download from your link ....when it's 50% downloaded then it has been cancelled ....How to download 100% let me know please. I have tried 6 to 7 times to download .
I get The Error "Failed to query SMC value from the host (VERR_INVALID_HANDLE). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap Interface: IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}" Someone Pls help
hello, thank you for this kind of video. It will be my first time trying this, and am trying to acquire some new skill and knowledge to land a next job soon. What else do you highly recommend other than Oracle Virtual Box as hyper V?
i keep on getting an error *Failed to query SMC value from the host (VERR_INVALID_HANDLE).*. im not sure what it is for but ive checked everything and all is fine. *i think changing value 1 to 0 fixed it*
I updated to the lastest macos version and now I am in a bootloop where it always says "About 29 minutes remaining" and after some time it restarts and it shows the same message again. need help pls
does this allow access to airplay functionality? For instance, will I be able to connect to a stereo pair of homepods with airplay on the virtual machine, and will it be the dolby atmos/5.1, etc. quality of audio? Any response is appreciated
Im not really sure about that mate. You'll probably have to try it out. I do know that the virtual machine does convert the usb input but im not sure about Bluetooth.
Hi, thanks for this tutorial! It finally worked with me, however, when I log in with my apple id, I get this message: "This Mac is no longer eligible to create apple ID accounts. Create an apple ID using a different device" Please note that I'm not creating a new account, this is a current account that is working fine. Also, I tried using a second account, same issue. Then tried creating an apple account, still, can't do that with this virtual machine. What am I missing? Could it be that many people used this link so it reached a maximum and apple stopped it?
Hey! That might very well be the case that Apple stopped the Mac from operating. If the problem is persisting, you might have to find a new Mac os file altogether. I do hope something works out though 😀
Great video and great explination. But I get an error message: Failed to load API DLL: WinHvPlatform.dll: VERR_MODULE_NOT_FOUND; vid.dll: VERR_MODULE_NOT_FOUND (VERR_NEM_INIT_FAILED). VT-x is not available (VERR_VMX_NO_VMX). Would be GREAT if you could help me. Greetins from Switzerland, Beat
Failed to query SMC value from the host (VERR_INVALID_HANDLE). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap Interface: IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8} i got this error while im trying to run it. an1 can help solve it?
I don't get how to fill the comment program with the Code😪 is it really just copy paste from the Code in the description? It's always said "wrong code" 😪 what can I dooo?:(
I get this fail every boot .....Failed to query SMC value from the host (VERR_INVALID_HANDLE). Result Code: E_FAIL (0X80004005) Component: ConsoleWrap Interface: IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}
I appreciate this video. I am needing help though. I get the same version of Virtual box. I have the same extension pack, but when I setup the mac version it is 32 bit and will not go to 64 bit and I cannot change my processor in settings. It is stuck to 1 cpu.
im about to have iOS development training in a couple months. i want to have a headstart about Swift programming language and other iOS stuffs, but my PC is Windows. can i follow this tutorial??
@@EverythingDude5 i failed 😥 mine was going well until it opened up the virtual machine and the mac terminal, just like yours, but it did not keep finishing like i waited for 3 hours. My laptop is asus TUF gaming, it has 8gb RAM and 12 cores... did i do something wrong?
AMD machine must have AMD-V enabled which means you may need hyper-v enabled. Otherwise, you won't get past “VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC” 1 and thus encounter error trying to run the VM.
Hi I think I stumbled while installing macos it said install on “macOS Catalina by techsviewer” about 14 minutes left… what should I do? I left it more than 30m, should i reinstall it or leave it more?
It's probably a network issue because it's a large file. Try downloading just the macOS file. Also, make sure you have a stable network connection. Hope something works 😊
@@EverythingDude5 Hi, I got the same problem - stopped at 14 minutes left on that screen, with no progress at all after 1 and a half hours. My network connection seems pretty stable. I don't know what you mean by 'try downloading just the MacOS file' though
I get stuck on boot with 2 single lines. BdsDxe: loading boot0002 "UEFI VBOX HARDDISK VB9cx........" from PciRoot (0x0) /Pci..... BdsDxe: starting boot0002 "UEFI VBOX HARDDISK VB9cx........" from PciRoot (0x0) /Pci..... and nothing else happens, any help?
Click skip for now, finish setting it up then sign in within the app store. Sadly texts, photos, etc may not transfer. IDK im still in the process of setup but thats how i was able to bypass it
If anyone is having the same issue as me : MACHINE WONT START you should maybe set the machine's CPU profile with CMD with some further commands as shown in this video (If you want to learn about the troubleshooting and to understand the issue etc) : ruclips.net/video/SpyNTZjQfNk/видео.html (Credit to the problem solver) : (her RUclips Channel : U4link3D) otherwise here are the commands: VBoxManage modifyvm "MAC" --cpu-profile "Intel Core i7-6700K" VBoxManage modifyvm "MAC" --pagefusion on VBoxManage modifyvm "MAC" --longmode on VBoxManage modifyvm "MAC" --triplefaultreset on VBoxManage modifyvm "MAC" --bioslogodisplaytime 3600 VBoxManage modifyvm "MAC" --biosbootmenu messageandmenu VBoxManage modifyvm "MAC" --vm-process-priority high // Replace the MAC as always with the name you gave to you're Machine! Hope it's save you some time ;)
IMPORTANT FOR AMD PROCESSORS -
NOTE - For AMD processors add this additional line in the cmd -
VBoxManage modifyvm "Mac 2 Trial" --cpu-profile "Intel Core i7-6700K"
--------------------------------------------------------------------------------------------------------
thank you for the tutorial. i think what I'm missing is putting in this line, but where do I find the proper CPU profile, for example ryzen 5 2600? thank you :D
@@raduanastase7612 i think it doesn't matter, i have a ryzen 7 5800x and adding this line solved my problem
i can't actually update the mac version.. is there any solution for this?
what is the password of zip file
not sure if you will ever see this since this video is so old. but will imessage work on this? i have tried and tried but it wont connect, just freezes
the last guy who gets straight into the tutorial instead of telling their whole intire lifes story
For anyone sitting in a "boot loop" while installing it.
Try reducing your processor amount to 2 (from half to 2).
It helped me and hope you too. It would be installing and after a long while I whould see the VirtualBox logo pop up with no error code what so ever.
So shut the machine down > go to settings and reduce the processors to 2.
This worked for me too! :)
Yay thanks it helped me
Hi Sir, I just installed Mac OS in my PC for the first time of Mac in my life, now I can enjoy the journey with Mac ios from now on, Thanks a lot !!! you're the man:D
Thank you so much it actually worked been stuck on this for days and your the first person with an easy short understandable and simple video. You just gained another sub
Glad to know I helped 😊😊
This is by far the best tutorial for getting Mac OS in virtual machine out there in my opinion also the OS file contains no viruses or unwanted bloatware
Glad I could help
@@EverythingDude5 just have one question when I load up the VM everything is fine except for I can’t get the internet to work and the refresh rate seems to be 30 or so. Any tips?
@@anthonyemlund248 i think MAC os needs to use different internet adapters so it wont work and the refresh rate is probally your pc's fault
@@xX_scooter.Gaming_Xxreal are u saying that internet does not work in it
Ah man... A little disappointed. Not because this didn't work, IT DID! Its been the most successful tutorial I've had so far o thank you! My disappointments stem from why I wanted mac on my PC. To run Garageband. Unfortunately i cant instal it because i need mac version 12.3 or later. Highly appreciate the helpful video regardless but its something to consider for any other users who intend to try out some of Mac OS's dedicated software.
Edit 1: Managed to find an older version that is actually downloading, will update this comment on results and information if anyone is interested to know.
Edit 2: Alright, good news! it works. GarageBand loads up and seemingly works as normal. The bad news, it’s super slow (maybe this could be dependant on the PC specifications). For the most part the whole OS runs a little slower and laggy than the standard but the slowdowns crank up when using software intended for heavy ram use. My PC has 32gb ram (dual 16gb 3600mhz, CL16), RTX 2060, Ryzen 5 4600G. I allocated the max amount of everything I could. RAM is set to 24421 MB (I’ve tried 8000, 16000, 20000 and 24000 also and there’s not much difference in performance). I assigned it 6 cores (gonna try out 4 cores for the giggles now). The OS doesn’t recognise my focusrite or midi keyboard (with the correct drivers installed to the OS). I can use my computer keyboard to play notes. Sound unfortunately are subject to stutter and realistically speaking they are completely useless because of this.
I tried watching a RUclips video, sound was okay for that but the pictures refresh rate wasn’t great. When I tried a RUclips video with GarageBand open; the sound crackling was there. Ultimately my computer isn’t good enough to run this smoothly. But the driver issues with the MIDI controller and audio interface were the biggest let down. No matter the speed, without those testing Playing instruments into GarageBand isn’t possible. Was a fun experiment though!
EDIT 3. Okay… 4 cores works far better than 6! Not perfect, far less crackle but still not perfect. Far more stability for me using 4 cores.
Potential final edit lol: tried recording using the better speed from using less cores, worked for 2 seconds then started getting funky and not in the musical sense!
Please send results
@@cloudluxiferyt1822 edit 2 contains the results
was considering using for Logic. Now won't. Thanks for saving me time :)
@@willtaylor-young no worries, happy to help. I dont think a virtual machine is worth trying for anything other than getting linux running on another OS without all the ballache of installing/overwriting it fully. I'd recommend looking at a hackintosh instead of a VM if you're wanting to edit music. I think there's a way you can dual boot both windows and mac OS's from the BIOS... Dont quote me on that but its something you could look into. I'll probably get round to trying it eventually just not anytime soon.
To anyone struggling to get this to work, I found that changing the Chipset to PIIX3 got me past the rebooting loops. Great tutorial Dude, thanks!
Thanks for the tip!
Lmao it just extended the reboot time to like 10min, its rebooting again
I'm stuck on 2:13, I'm not seeing anything under preferences that says "extensions" or "add extensions" so I don't know what to do now. I'm not sure what I would be clicking on in that event, anyway...
Go to File > Tools > Extension Pack Manager. Then click the 'Install' button or you can also just double click it in your downloads to install it
I wanted to install Windows 11 on macos, but this video was great, I followed basically the same steps! Thanks :D
🗿
Everything works great but i cant connect to wifi. The option wont even show. Any tips?
(Pc does not have ethernet conection)
If the processors slider is grayed out, you need to go into your BIOS and enable virtualization.
allthoug the download for cataline was longer than the video it is amasing thank you you are a legend
guys if you get an error saying AMD-V is disabled in the BIOS and you use AMD processor its simple.
Restart your laptop/desktop. Then, on the boot screen, press the BIOS key (F2, F4, F8, F10, F12, or the Del key) to enter into BIOS mode. The BIOS key may vary depending on computer models. But you can follow the on-screen instructions or search it online.
In the BIOS interface, navigate to Advanced > CPU Configuration. In this tab, make sure the AMD-V or AMD SVM is enabled. The specific path and the virtualization technology name may vary depending on different BIOS versions.
Press F10 to save the changes and then exit from BIOS.
It may be difficult to find the settings but it should be there. somewhere in the advanced section
Great video! However, when I tried to start the VM, I got an error: Failed to query SMC Value from the host (VERR_INVALID_HANDLE). Any suggestions on how to handle this?
Someone posted a answer below: ADd this line to the command prompt VBoxManage.exe setextradata "Your macOS VM Name Here!!!" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
@@briandelavan8833 Thank you! That worked
@@briandelavan8833 thanks this helped me out
@@briandelavan8833 where in the cmd lines did you add this too as im having the same issue
@@briandelavan8833 thank you!
This is the best tutorial for how to get Mac OS in virtual machine. Thank you man.
Happy to help 😊
After all installation is done there is installation of apple logo after some installation it freezes and wont complete
Please reply 🙏
Why does mine say something flush and boot loop forever? How do I fix?
you've deserved my like and respect, and probably blessing
Thank you so much! Everything worked perfectly, but you need a newer version to be able to install apps from the store. Updating only gives me the "Package %@ is missing or invalid" after downloading for an hour. I tried looking for a solution but I cant seem to find one that works. How can I fix this?
Thank you men you are the best! It worked first Try and I did the AMD command thing because I have an Ryzen 5 3600 and that Worked fire Try too! thx Men :D
Fast. Straight to the point
Can you tell me how I can use vmdk file in virtual box? Cuz I got it instead of iso file from the drive link in the description.
Wi-Fi network is disabled when setting up MacOS. How do I get an internet connection within my Mac virtual machine?
Done all the steps but installation within mac is stuck at "14 min remaining". Basically stuck halfways, any idea why?
Same here did you find a fix?
@@anasosama7063 Not using this guide, the issue is this guide doesnt work if you run AMD processor, only for intel processors.
This is the link I used to finally install mac on my laptop ruclips.net/video/47O56JftzTA/видео.html
@@anasosama7063 hey did u find a fix? i have a intel processor and its been stuck for approx 24h
It doesn't work , UEFI Interactive Shell appears
Can Anyone Please Help, I got into mac it loads fine but I cant drag any files inside my mac. Not even on the mac desktop or in the download folder. I need to drag a file in order to get in to what I'm trying to do. Can Someone Please Help and let me know why I cant drag any files within the macOS.
Finally someone who smart enough to compress this huge file before upload it
how did u unzip the file ive been trying to with 7zip but it keeps saying its the wrong password and wont let me get the macos file
@@TheLegendOfLewis it's 1234 the password
6:23 how do i get that?
Thanks my guy. Support from Canada
Can anyone help me when I enter cmd ad admin the second line of code does not work and I get this error: 'VBoxManage.exe' is not recognized as an internal or external command,
operable program or batch file.
same thing with me. IDK how to fix
Does this work on a laptop? ASUS TUF GAMING F15
I would appreciate a respond.
Second Command issue:- "--cpuidset'' command not found
I did everything again and got the same error message, but I am not giving up.
The virtual machine failed to boot. That might be caused by a missing operating system or a misconfigured boot order. Mounting an operating system install DVD might solve this problem. Selecting an ISO file will attempt to mount it after the dialog is closed.
3:00
At 5:04 I didn’t get where to go and fill the lines please help 🙏
Go to your command prompt. You will need to select "Run as Administrator", then click OK
Catalina OS doesn't download from your link ....when it's 50% downloaded then it has been cancelled ....How to download 100% let me know please. I have tried 6 to 7 times to download .
I get The Error
"Failed to query SMC value from the host (VERR_INVALID_HANDLE).
Result Code:
E_FAIL (0X80004005)
Component:
ConsoleWrap
Interface:
IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}"
Someone Pls help
u find a solution yet?
same issue brother
run this and gonna fix it
VBoxManage setextradata "Mac 2" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
@@Rahul-jb8rc run this and gonna fix it
VBoxManage setextradata "Mac 2" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
@@bashelow9859 run this and gonna fix it
VBoxManage setextradata "Mac 2" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
hello, thank you for this kind of video. It will be my first time trying this, and am trying to acquire some new skill and knowledge to land a next job soon. What else do you highly recommend other than Oracle Virtual Box as hyper V?
i keep on getting an error *Failed to query SMC value from the host (VERR_INVALID_HANDLE).*. im not sure what it is for but ive checked everything and all is fine. *i think changing value 1 to 0 fixed it*
I updated to the lastest macos version and now I am in a bootloop where it always says "About 29 minutes remaining" and after some time it restarts and it shows the same message again. need help pls
Probably shouldn't have upgraded to the latest version
Best tut on this!! Good Job man!
does this allow access to airplay functionality? For instance, will I be able to connect to a stereo pair of homepods with airplay on the virtual machine, and will it be the dolby atmos/5.1, etc. quality of audio? Any response is appreciated
Im not really sure about that mate. You'll probably have to try it out. I do know that the virtual machine does convert the usb input but im not sure about Bluetooth.
i have a question is it like a window like hyper v or is it running as a real software
dude it says in my command's that system cannot find a way
i can’t drag and drop anything, any help?
Yea, we're no longer able to open the Catalina File from Drive. Is there anywhere else we can download it?
yes you can liar, i just downloaded it right now it's a rar file with two files in it.
I've been having some problems with the setup in the VirtualBox Mac OS Ventura, it keeps giving me less than a minute remaining.
This doesn't work, after I used the commandline stuff I just get loads of errors when the mac is booting up
Configuration error: Querying "UUID" failed (VERR_CFGM_VALUE_NOT_FOUND).
How do I access that note pad thing with the name of your virtual box
Thank you brother, works like a charm.
does it have imessage inside?
does anyone know how to get internet on the vm?
Edit: i just needed a bridged adapter and a restart all setup
i get this error when i try to press finish when creating the virtual machine: Failed to overwrite medium storage
Hi, thanks for this tutorial! It finally worked with me, however, when I log in with my apple id, I get this message: "This Mac is no longer eligible to create apple ID accounts. Create an apple ID using a different device" Please note that I'm not creating a new account, this is a current account that is working fine. Also, I tried using a second account, same issue. Then tried creating an apple account, still, can't do that with this virtual machine. What am I missing? Could it be that many people used this link so it reached a maximum and apple stopped it?
Hey! That might very well be the case that Apple stopped the Mac from operating. If the problem is persisting, you might have to find a new Mac os file altogether. I do hope something works out though 😀
If you still have the issue, you can just skip it and login later
I have a question how do you make to get back to your windows?
Just close the vm or shutdown the Mac
I'm getting prompted for a password for the Mac image. Any ideas?
was wondering what to do if it automatically aborts the start?
bro i shit u not i have done many try's at getting this off other channels but my guy ur a genius got it working legand
Legand indeed 😂
Im from South Africa 😃😃😃 Everything works 🕺🕺🕺
Great tutorial man, Thank you very much!
Great video and great explination. But I get an error message: Failed to load API DLL: WinHvPlatform.dll: VERR_MODULE_NOT_FOUND; vid.dll: VERR_MODULE_NOT_FOUND (VERR_NEM_INIT_FAILED).
VT-x is not available (VERR_VMX_NO_VMX). Would be GREAT if you could help me. Greetins from Switzerland, Beat
I am getting error : memory at ....... could not be read. Using AMD, i tried the last line of VBoxManage command
gives me problem when i start it, says failed to open a session for the virtual machine
I am getting this after installing just like the video: icloud unsupported device virtualbox windows 10 (Any way to fix this)
can some1 help me out - im trying to run xroar for mac os x ?? it wont run it just quits or does not run at all - thanks.................
My network stopped working across all devices after this, any advice? I am using amd.
Failed to query SMC value from the host (VERR_INVALID_HANDLE).
Result Code:
E_FAIL (0X80004005)
Component:
ConsoleWrap
Interface:
IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}
i got this error while im trying to run it. an1 can help solve it?
your missing a line of code its in the comments someone had the same problem i did too
I don't get how to fill the comment program with the Code😪 is it really just copy paste from the Code in the description? It's always said "wrong code" 😪 what can I dooo?:(
I get this fail every boot .....Failed to query SMC value from the host (VERR_INVALID_HANDLE).
Result Code:
E_FAIL (0X80004005)
Component:
ConsoleWrap
Interface:
IConsole {6ac83d89-6ee7-4e33-8ae6-b257b2e81be8}
same bro
run this and gonna fix it
VBoxManage setextradata "Mac 2" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 0
what we are modifying in VM? can you explain this commands?
When I download the image, it downloads in Virtual Machine Disk Format instead of an ISO. How do I convert to the right format?
same bro
The link of Catalina which you have given is that downloaded from orginal Mac os store(app store)?
Please reply me.
Apple doesn't allow downloading like that, but it's virus free and safe
Great video bro I subbed👍
Let's goo
How to import the mac os image?
I appreciate this video. I am needing help though. I get the same version of Virtual box. I have the same extension pack, but when I setup the mac version it is 32 bit and will not go to 64 bit and I cannot change my processor in settings. It is stuck to 1 cpu.
@@ferretguyman2462 you are stupid
FACT
@@xvii_xxii is your virtualbox download 32 bit or 64 bit. You may need the 64 bit versions or you are running a 32 bit windows os version
@@bryantlroeback3287 i remember i found the solution but i dont care about vm anymore
It works but I can't install XCode because the OS is not compatible
i cant upload the extension file. is there any tip to upload it?
Everything good the last boot then virtual box keeps restarting bootstrap error
im about to have iOS development training in a couple months. i want to have a headstart about Swift programming language and other iOS stuffs, but my PC is Windows. can i follow this tutorial??
Yes! This will really benefit you, I also did this because I wanted to use xcode. Good luck
@@EverythingDude5 i failed 😥 mine was going well until it opened up the virtual machine and the mac terminal, just like yours, but it did not keep finishing like i waited for 3 hours.
My laptop is asus TUF gaming, it has 8gb RAM and 12 cores... did i do something wrong?
3D Acceleration work?
am i on the right part of installing (in the installing on drive thingy and its taking a long time)
Is garage band fully functional on heree
Do you have the OS image for IPADS too? or where can I find that? someone please help!
My Mac doesn’t load up and it says “aborted”. Is there a fix for this?
reboot your pc and go into the bios and enable intel virtualization
ok thanks great ! - but how do u run xroar (a dragon 32 emulator for windows & mac)?? on mac os x catalina 64 bit ? thanks.............
AMD machine must have AMD-V enabled which means you may need hyper-v enabled. Otherwise, you won't get past “VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC” 1 and thus encounter error trying to run the VM.
How to get the command promp and to enter in the codes.. (7.11) need help!!! @Everything Dude
awesome vid this works!
Hi I think I stumbled while installing macos it said install on “macOS Catalina by techsviewer” about 14 minutes left… what should I do? I left it more than 30m, should i reinstall it or leave it more?
It's probably a network issue because it's a large file. Try downloading just the macOS file. Also, make sure you have a stable network connection. Hope something works 😊
@@EverythingDude5 Hi, I got the same problem - stopped at 14 minutes left on that screen, with no progress at all after 1 and a half hours. My network connection seems pretty stable. I don't know what you mean by 'try downloading just the MacOS file' though
@@jeanravenclaw3177 Hello Jean - Ive had the same problem - were you able to find a solution? Thanks
@@EverythingDude5 Hello - I am also having the same issue as Ahmed and Jean - It is not a network error - Im not sure what it is though
@@chopstix9093 did u find a fix. im also strruggling at the moment
i cant drag and drop for some reason in the the mac
Can we enable transparency effect on mac by increasing video ram to 1GB or 2GB?
Can this be upgraded to the latest version of Macos?
does it even still works? I just tried it and nothing happened it wasn't working.
i can not access internet on mac please suggest any solution
I get stuck on boot with 2 single lines.
BdsDxe: loading boot0002 "UEFI VBOX HARDDISK VB9cx........" from PciRoot (0x0) /Pci.....
BdsDxe: starting boot0002 "UEFI VBOX HARDDISK VB9cx........" from PciRoot (0x0) /Pci.....
and nothing else happens, any help?
same
SIR WHY I M UNABLE TO CREATE APPLE ID ON VIRTUAL BOX
IT IS SAYING THAT THIS MAC HAS BEEN USED TO MANY TIMES TO
CREATE APPLE ID
Click skip for now, finish setting it up then sign in within the app store. Sadly texts, photos, etc may not transfer. IDK im still in the process of setup but thats how i was able to bypass it
Does it let you use App Store and download iOS apps from there?
Yes but not as many
I have a problem at the very end where when i boot it up it is unable to load "boot0001". idk :/ im not very bright
did u figure out?same prob with me
If anyone is having the same issue as me : MACHINE WONT START you should maybe set the machine's CPU profile with CMD with some further commands as shown in this video (If you want to learn about the troubleshooting and to understand the issue etc) : ruclips.net/video/SpyNTZjQfNk/видео.html
(Credit to the problem solver) : (her RUclips Channel : U4link3D)
otherwise here are the commands:
VBoxManage modifyvm "MAC" --cpu-profile "Intel Core i7-6700K"
VBoxManage modifyvm "MAC" --pagefusion on
VBoxManage modifyvm "MAC" --longmode on
VBoxManage modifyvm "MAC" --triplefaultreset on
VBoxManage modifyvm "MAC" --bioslogodisplaytime 3600
VBoxManage modifyvm "MAC" --biosbootmenu messageandmenu
VBoxManage modifyvm "MAC" --vm-process-priority high
// Replace the MAC as always with the name you gave to you're Machine! Hope it's save you some time ;)
Hi so should i give all of my cores to my vm or half (I have 6 cores)
give all 6, should have no issues