Wow! Great hearing from you and it was great to see you last month. Just a shout out to anyone that may need any design work. Yuval is a great CAD jewelry designer. If you need any design made you should reach out to him. He will not disappoint. Thanks for dropping the comment and your support. Hope to see you again next year with the gang. lol
Yes agree. I need to put up more of them and will get to them as soon as possible. They will go in the ribbon command content. Eventually I will go through all the commands and sub commands in the command line. Not enough time in the day but will get to them. Hang in there. Appreciate all the support and comments.
I would really really appreciate a tutorial on using images (I make a lot of designs using photographs) I used to use Matrix art however sadly that is no longer.... Please please please are we able to create the same effect using Emboss? Hope this makes sense, cheers :) @@donsjewelrymakingandjapantrave
hi! I was wondering if you took any extra steps besides tracing out the bear before starting with the emboss command. I traced mine out with a free-form curve and tried to emboss it but the center is coming out either really messy or as just an outline rather than being filled in. just wondering if I'm missing something because I'm still a bit of a beginner!
@@catfromtoontown not in front of my computer at the moment but I know there is a certain button that you have to make sure is clicked on to grow the surface. Also I would check your curve to make sure it is a closed planner curve and doesn’t have any overlapping if you’re just picking a color. I’ll get back to you with more information when I can.
First of all, thank you for this instructional video. I have a question for you. I'm having some issues with Matrix Gold. Especially the surface is also about Gems or Stone cutters. I can't choose it, I can't put it where I want, or it doesn't work at all. Have you experienced the same situation? Matrix 9 works better.
No, sorry I have not really had any of those issues so far. I have run across some issues with the bypass outside ring rail and the gems in channel commands not working here lately. Matrix 9 was the last of the older Matrix programs to come out. They did pretty much perfect it up to the point where they could. Matrix gold is relatively still a baby. There will be issues that arise just like back in the early Matrix programs, but I guess we will have to see how fast they fix those issues going forward. So far, I am very optimistic with their efforts and speed on which they address them as they come up. Time will tell though. huh. Most of my issues so far have been created by my own mistakes. Forgetting to ungroup or hitting the commands before they are actually ready to accept them stupid stuff like that. I'm so far really happy with the program. I hope things go smoother for you in the future. Let me know if there is any way I can help. Love hearing from you.
@@donsjewelrymakingandjapantrave Thank you. As it is known, MatrixGold v3.2.23025.2001 upgrade has arrived. How to use the Flip command in the Cuve Menu? Did you review?
Hello. I do have one more question 😂 what graphics card do you use? Is AMD any good for matrixgold? Is Nvidia better? (can you please give some models for example? ) I can't find any information about this online.
If you do a search in google for Gemvision Matrix Gold 3.0 system requirements. Gemvision has a page that will explain all that way better than I could. You’ll find system requirements in the ribbon just click on it. Hope that helps.
Yeah i know. But it doesent say anything about amd. Also it just says geforce rtx are good but there are around 20 graphics cards rtx. If i send them an email to ask which is better they tell me they can't find my email adress in their clients database.
@@eliasdenitiu9352 Guess I have to ask. Are you running a licensed copy? Lol they should help you out. Very surprised they won’t answer that simple question. Im not sure really about the and card to tell you the truth. Im running a Nivida GeForce 1660 super. Not really the best for the program I do know that.
I work on a friends computer that has a jewelry production store and uses this software. I decided to see how it works because he speaks very highly of the product. I used only zbrush for modeling jewelry and worked like a charm for me but i still wanted to learn a little of CAD to seek new possibilities. I wanted to try the software first because i don't want to rush into buying a software that costs 8000$ without testing it first. He's computer runs matrixgold very very laggy when starting to place prongs and stones. Thats why i was trying to find out what specifications are required.
@@eliasdenitiu9352 yea I can understand that. I would probably do the same. I’ll dig into it a little deeper and see what I can find out. Envy you with zbrush that’s something I’ve very interested in myself. Hopefully someday will I have some time to dig into it. I also like Blender. I’ve been playing around with that the last several years. Pretty cool stuff. Blender actually uses the same rendering engine as martix Gold. Cycles. Also uses nodes which is a good basic foundation for grasshopper inside MatrixGold as well.
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Thank you, I needed this refresher.
Wow! Great hearing from you and it was great to see you last month. Just a shout out to anyone that may need any design work. Yuval is a great CAD jewelry designer. If you need any design made you should reach out to him. He will not disappoint. Thanks for dropping the comment and your support. Hope to see you again next year with the gang. lol
thanks, Can't wait to see what the other buttons do, especially working with images and depth map, thanks, hope there will be more clayoo videos soon
Yes agree. I need to put up more of them and will get to them as soon as possible. They will go in the ribbon command content. Eventually I will go through all the commands and sub commands in the command line. Not enough time in the day but will get to them. Hang in there. Appreciate all the support and comments.
I would really really appreciate a tutorial on using images (I make a lot of designs using photographs) I used to use Matrix art however sadly that is no longer.... Please please please are we able to create the same effect using Emboss? Hope this makes sense, cheers :) @@donsjewelrymakingandjapantrave
どのビデオよりもわかりやすいです。たくさんのひとがみてくれるといいです
Arigato, very nice of you. Thaks for your support.
Great work.Thanks a lot!
Thank you too!
awesome and informative....
Thank you. Also thanks for the comment and all your support.
hi! I was wondering if you took any extra steps besides tracing out the bear before starting with the emboss command. I traced mine out with a free-form curve and tried to emboss it but the center is coming out either really messy or as just an outline rather than being filled in. just wondering if I'm missing something because I'm still a bit of a beginner!
@@catfromtoontown not in front of my computer at the moment but I know there is a certain button that you have to make sure is clicked on to grow the surface. Also I would check your curve to make sure it is a closed planner curve and doesn’t have any overlapping if you’re just picking a color. I’ll get back to you with more information when I can.
First of all, thank you for this instructional video. I have a question for you. I'm having some issues with Matrix Gold. Especially the surface is also about Gems or Stone cutters. I can't choose it, I can't put it where I want, or it doesn't work at all. Have you experienced the same situation? Matrix 9 works better.
No, sorry I have not really had any of those issues so far. I have run across some issues with the bypass outside ring rail and the gems in channel commands not working here lately. Matrix 9 was the last of the older Matrix programs to come out. They did pretty much perfect it up to the point where they could. Matrix gold is relatively still a baby. There will be issues that arise just like back in the early Matrix programs, but I guess we will have to see how fast they fix those issues going forward. So far, I am very optimistic with their efforts and speed on which they address them as they come up. Time will tell though. huh. Most of my issues so far have been created by my own mistakes. Forgetting to ungroup or hitting the commands before they are actually ready to accept them stupid stuff like that. I'm so far really happy with the program. I hope things go smoother for you in the future. Let me know if there is any way I can help. Love hearing from you.
@@donsjewelrymakingandjapantrave Thank you. As it is known, MatrixGold v3.2.23025.2001 upgrade has arrived.
How to use the Flip command in the Cuve Menu? Did you review?
Hello. I do have one more question 😂 what graphics card do you use? Is AMD any good for matrixgold? Is Nvidia better? (can you please give some models for example? ) I can't find any information about this online.
If you do a search in google for Gemvision Matrix Gold 3.0 system requirements. Gemvision has a page that will explain all that way better than I could. You’ll find system requirements in the ribbon just click on it. Hope that helps.
Yeah i know. But it doesent say anything about amd. Also it just says geforce rtx are good but there are around 20 graphics cards rtx. If i send them an email to ask which is better they tell me they can't find my email adress in their clients database.
@@eliasdenitiu9352 Guess I have to ask. Are you running a licensed copy? Lol they should help you out. Very surprised they won’t answer that simple question. Im not sure really about the and card to tell you the truth. Im running a Nivida GeForce 1660 super. Not really the best for the program I do know that.
I work on a friends computer that has a jewelry production store and uses this software. I decided to see how it works because he speaks very highly of the product. I used only zbrush for modeling jewelry and worked like a charm for me but i still wanted to learn a little of CAD to seek new possibilities. I wanted to try the software first because i don't want to rush into buying a software that costs 8000$ without testing it first. He's computer runs matrixgold very very laggy when starting to place prongs and stones. Thats why i was trying to find out what specifications are required.
@@eliasdenitiu9352 yea I can understand that. I would probably do the same. I’ll dig into it a little deeper and see what I can find out. Envy you with zbrush that’s something I’ve very interested in myself. Hopefully someday will I have some time to dig into it. I also like Blender. I’ve been playing around with that the last several years. Pretty cool stuff. Blender actually uses the same rendering engine as martix Gold. Cycles. Also uses nodes which is a good basic foundation for grasshopper inside MatrixGold as well.