pony sounds great man!!...I had a 96gt but recently got into a car accident... I'm getting a 2007 v6 and now I know the exact route to go for with the exhaust....so glad I found this clip!!!
I had same problem with my 2006 v6 I had put dual flow masters and my trunk would shake came out to be bad weld. Took it back and re welded it and shaking stoped over all. The sound you have is amazing. Good work
I'm actually looking to start adding some mods to my sexy six Mustang. 2008 to be exact. Helped me a lot with what the sound of the car is like with the CAI.
I actually had the same problem on my 2008 v6. I had equal length headers to dual cats to straight pipes to flowmaster 40s. My passenger exhaust pipe would shake like crazy almost as bad as yours does until my held broke. Just buy a hanger kit on Am. Kit should be 40 bucks and then go to local shop and get it welded in. Should be 75-100 bucks to install.
@Christopher Bryon Love the video... The exhaust shakes due to a loose connection somewhere or the flex pipe either behind cats on muffler side or before cats is weak and needs replaced... Could also be broken exhaust hanger.... Check those things let me know and we can go from there..
I have an 07' v6 with Pypes true dual and the only problem I have is that the driver's side exhaust rides up higher than the other side. It might be that the bolts on the back where it slides into is too loose. Also get a strut tower brace, you will see a difference when taking corners.
You need upgraded clamps for the exhaust system or you could weld it. You can find the clamps from American Muscle and ask them if it's compatible with your exhaust system, it should be. from what I'm understanding with the clamps, they have a much better hold and prevent this type of shaking to the exhaust pipes.
Shot in the dark as to why your pipes are shaking, I'm guessing when the shop did the work, they went the quicker/less costly route and didn't make use of the factory passenger side muffler hanger. The driver side doesn't come with mounting for exhaust hangers on the v6 for obvious reasons but you can pick them up from AM. I'm guessing that is why it shakes. You would need your exhaust shop to fab up mounts on your current piping for the exhaust hangers to work with. Item # 20021
my v6 has a super charger..!! n flow Master super 44 on it and some bbk headers sound mean as fuk..!! I have a 2010 mustang v6 ..pulling 350horsepower on dyno..
you can try a clothes hanger, may sound stupid but if you tie up the pipes it may reduce the shaking, idk if itll work cuz ive never had that issue but we used a clothes hanger to keep the pipes up when my friends midpipe broke which resulted with the muffler and the exaust tips dragging on the road, not a pretty sound, but ya, clothes hanger. maybe worth a shot
the bbk cold air intake i got from american muscle.com.....seriously awesome site, service , and experience from them. then the exhaust in total to separate the pipes and delete the muffler in total including labor was around 290ish, this is going to depend on where you take it to get the work done for the exhaust, ive seen wildly varying prices for this job, so do some shopping lol do you have any other questions i can answer for you??
I have a v6 2008 mustang and I currently have it straight piped and dual tip one one side, I was thinking to get a cat back straight piped quad exhaust.. Do u think that it will be worth it?
Hey so i just got an 07 mustang v6 and i like to do something similar to this in total with the intake exhaust and the other small mods how much did it cost you?
U should try a set of flomaster 10s with an X pipe. I have a 97 v6 and that's what I have on mine. And everyone asks if it's a v8 when I tell them it's a v6 they start going on about how it sounds like a v8
I needed more power in my 06 V6 Stang , so this is what i did: At the moment it has 4:10 gears, Lim Slip Diff, Stage 2 Clutch, Screamin Demon Dist, 10mm Spark Cables, 70mm Throttle body, Nitrous Express 250 Shot dumbed down from 400 shot, True Dual Exhaust, CAI, and Water Methanol Injection. These are my videos on how to install Nitrous Oxide on this car. ruclips.net/video/j_fhKYiP0ZI/видео.html Plumbing: ruclips.net/video/MdXdH5z-jKU/видео.html Tuning: ruclips.net/video/GTRfwMlQSxk/видео.html
I have a modified 04. Trust me, I know when it comes to the aftermarkets with one thing. None of it fits 100%. I bet your louvers on the rear windows look like hell up close in certain ways after installing them
Never ever ever ever ever ever ever put a high power sprayer from a car wash or anything to clean you engine bay. You got lucky you didn’t destroy you engine, computer, wires, battery, etc etc etc. never ever do this if your reading this comment DO NOT spray your engine bay
Go with a v8 ours will beat any car it's a drag racing car with twin turbo and has around 2000 horse power it a monster it turns every body's head we were drive in to the track
I had same problem with my 2006 v6 I had put dual flow masters and my trunk would shake came out to be bad weld. Took it back and re welded it and shaking stoped over all. The sound you have is amazing. Good work
Авто/Мото
the shake is because you don't have x or h pipe in the middle to distribute the headers pressure. it will add more rumble too
pony sounds great man!!...I had a 96gt but recently got into a car accident... I'm getting a 2007 v6 and now I know the exact route to go for with the exhaust....so glad I found this clip!!!
Paint those window covers black for sure
i got a 08 v6 and installed long headers, and a bama tune. No joke this thing sounds like a v8.
Rear window covers look a shade darker than the car haha but I'm sure nobody will notice unless the get right up next to it. Nice car man!
It's a few shades darker
I had same problem with my 2006 v6 I had put dual flow masters and my trunk would shake came out to be bad weld. Took it back and re welded it and shaking stoped over all. The sound you have is amazing. Good work
I'm actually looking to start adding some mods to my sexy six Mustang. 2008 to be exact. Helped me a lot with what the sound of the car is like with the CAI.
Love what you did with the mustang logo on the back
I actually had the same problem on my 2008 v6. I had equal length headers to dual cats to straight pipes to flowmaster 40s. My passenger exhaust pipe would shake like crazy almost as bad as yours does until my held broke. Just buy a hanger kit on Am. Kit should be 40 bucks and then go to local shop and get it welded in. Should be 75-100 bucks to install.
Love the car !!!
@Christopher Bryon Love the video... The exhaust shakes due to a loose connection somewhere or the flex pipe either behind cats on muffler side or before cats is weak and needs replaced... Could also be broken exhaust hanger.... Check those things let me know and we can go from there..
I have an 07' v6 with Pypes true dual and the only problem I have is that the driver's side exhaust rides up higher than the other side. It might be that the bolts on the back where it slides into is too loose. Also get a strut tower brace, you will see a difference when taking corners.
Damn those are nice big time I got me one I have to put body kit on mine ❤❤👍🏾❤👍🏾❤👍🏾❤👍🏾❤🔥🔥🔥🔥🔥🔥😍🏎🏎🏎🏎🏎
You need upgraded clamps for the exhaust system or you could weld it. You can find the clamps from American Muscle and ask them if it's compatible with your exhaust system, it should be. from what I'm understanding with the clamps, they have a much better hold and prevent this type of shaking to the exhaust pipes.
Dude. Nice stang, u should try welding a bracket to keep the pipes from moving. It should help
Shot in the dark as to why your pipes are shaking, I'm guessing when the shop did the work, they went the quicker/less costly route and didn't make use of the factory passenger side muffler hanger. The driver side doesn't come with mounting for exhaust hangers on the v6 for obvious reasons but you can pick them up from AM. I'm guessing that is why it shakes. You would need your exhaust shop to fab up mounts on your current piping for the exhaust hangers to work with. Item # 20021
nice dude.
Awesome
A better car will fix the exhaust. Jk love the look of the blackened taillights and emblems.sounds amazing
my v6 has a super charger..!! n flow Master super 44 on it and some bbk headers sound mean as fuk..!! I have a 2010 mustang v6 ..pulling 350horsepower on dyno..
you can try a clothes hanger, may sound stupid but if you tie up the pipes it may reduce the shaking, idk if itll work cuz ive never had that issue but we used a clothes hanger to keep the pipes up when my friends midpipe broke which resulted with the muffler and the exaust tips dragging on the road, not a pretty sound, but ya, clothes hanger. maybe worth a shot
the bbk cold air intake i got from american muscle.com.....seriously awesome site, service , and experience from them.
then the exhaust in total to separate the pipes and delete the muffler in total including labor was around 290ish, this is going to depend on where you take it to get the work done for the exhaust, ive seen wildly varying prices for this job, so do some shopping lol
do you have any other questions i can answer for you??
I have a v6 2008 mustang and I currently have it straight piped and dual tip one one side, I was thinking to get a cat back straight piped quad exhaust.. Do u think that it will be worth it?
place hangers closer to the tail pipe. will take all the shake out
Weld your exhaust to something to keep it from shivering
Does your v6 sounds like that without the intake?
What did you cover when you washed the engine bay? I really want to know i dont wanna mess mine up
Duck tape... Duck tape will fix the exhaust pipes moving... Jk. Idk how to fix that.
honestly it IS a mustang so duct tape never really seemed out of the question haha
try o put a bracket towards the end of the exhaust pipes so they won't rattle
Mount some brackets back by the bumper
You don't have exhaust hangers on the tips do you?
Hey so i just got an 07 mustang v6 and i like to do something similar to this in total with the intake exhaust and the other small mods how much did it cost you?
U should try a set of flomaster 10s with an X pipe. I have a 97 v6 and that's what I have on mine. And everyone asks if it's a v8 when I tell them it's a v6 they start going on about how it sounds like a v8
Love it. Where can i buy a bbk cold air intake. I have a v6 mustang just like yours
American Muscle or CJ Pony
What kind of shift knob do you have
How much did it cost to have your pony wired ? I have an o5 v6 true duals now stage 2 clutch from American muscle
I needed more power in my 06 V6 Stang , so this is what i did:
At the moment it has 4:10 gears, Lim Slip Diff, Stage 2 Clutch, Screamin Demon Dist, 10mm Spark Cables, 70mm Throttle body, Nitrous Express 250 Shot dumbed down from 400 shot, True Dual Exhaust, CAI, and Water Methanol Injection.
These are my videos on how to install Nitrous Oxide on this car.
ruclips.net/video/j_fhKYiP0ZI/видео.html
Plumbing:
ruclips.net/video/MdXdH5z-jKU/видео.html
Tuning:
ruclips.net/video/GTRfwMlQSxk/видео.html
How are the maintenance costs on it?
Hey man nice pony. What part of Ohio do you live? I'm in cincy
i live in canton ohio!
Your exhaust is rattling for two reasons, your pipes are either too restrictive, or you need two extra hangers right before the tailpipe
I need that silver dash mine is blk
how do I turn on those fog lights
you and I have the same one
weld a hanger on the tip and the frame
Go to exhuast shop so they can weld it still
Just weld it to a solid piece of metal to keep it stable
I have long tube header no cats no mufflers on my 4.0 that's true straight pipe lol
I have over $12,000 dollars in my 07 GT S197 V8 3 valve 5 speed trans
You can do a lot to
A v6
i'm considering a v6 stang automatic year 08 . are they worth it or should i get v8 ?
Just get a v8
If u can get a v8 even if its an older v8 get it and u wont regret it after u hear the noise
Dsgdrew dw you will after you start paying for the amount of gas it takes
I have a modified 04. Trust me, I know when it comes to the aftermarkets with one thing. None of it fits 100%. I bet your louvers on the rear windows look like hell up close in certain ways after installing them
Never ever ever ever ever ever ever put a high power sprayer from a car wash or anything to clean you engine bay. You got lucky you didn’t destroy you engine, computer, wires, battery, etc etc etc. never ever do this if your reading this comment DO NOT spray your engine bay
Weld the end of it to the frame it self should stop it
Go with a v8 ours will beat any car it's a drag racing car with twin turbo and has around 2000 horse power it a monster it turns every body's head we were drive in to the track
hey man check out my ride
I had same problem with my 2006 v6 I had put dual flow masters and my trunk would shake came out to be bad weld. Took it back and re welded it and shaking stoped over all. The sound you have is amazing. Good work
Thanks friend! thanks for the advice as well!