I know the Experimental Airlines designs have always been about cheap or free materials and ease of construction. Ed, you got me back into the hobby with your building techniques, Thank you. I picked up a cheap 3d printer and have been using it to create servo mounts and tail adaptors similar to your corner molding. Not everyone has access to the 3D printing and your methods are wonderful. 3D printers have come down to the "affordable" realm and fit into this hobby well. If you do have access to 3D printing, I recommend giving it a try. It's been fun learning the cad software and actually fabricating custom parts for individual tasks. Keep the videos coming and thanks again!
Between you and the Flite Test forums my scratch building has progressed way further than I could have ever dreamed. Loved these ideas and for sure I will be implementing some of them on my next builds. Keep up the awesome videos. :)
Very very nice. I love to tinker in my garage with the crashed plane parts and the material that I find commonly around the hardware store is a positive challenging to me. Thanks for the info.
+lasersbee I wish too. Here's the bummer: I'm reduced to videoing with my iPhone, having gradually killed off all my proper video cameras. Once I re-acquire a camera with zoom, I will make it right with the flying videos.
Ed, good to see you posting valuable videos again. Thank you. We never got to fly together before you left AZ...Hope you're settled in VA and ready to make more videos!
I'm not a convert to carbon tubes, they seem to twist to much, but you did have some (quite a lot) of idea's that I will put in to practice, Thanks Ed for putting this up.
One advantage of using double stick tape in construction is that it can be removed with alcohol. It's messy but repair is easier when major components are assembled as you have done this way.
Ed, You da man! Thanks for figuring out the carbon fiber rod stuff. Nicely done. I like the corner guard and aluminum angle usage. I think you nailed a whole new Experimental Airlines design series!!! Cheers
Hi Ed, this video inspired me to build a cf stick plane based on some of your ideas mentioned here. I've just maidened it, needs some fine tuning. But I'll post a link to details about it later.
great vid - using a 10mm boom I have put my servos up front in the fuz, run the snake tubes down the middle of the boom, and drilled exits near the end - the reduced strength compensated by a 1/32 ply tail 'tray'. I really like the reusability and disassembly of your system though.
Hi Ed - Another great video. I'd really love to see your complete DLG design. It's an area that I'd like to explore, and I'd be happiest getting started at least with a scratch built rather than very expensive purchased glider.
Thanks for detailed video , it’s very informative , got good ideas to make a stick plane , I was thinking to make a stick plane from a 12 sqmm wood rod , This video will definitely be useful , Thanks again
Have you made the jump to 3D printing yet? I finally did myself and it's extremely useful for making mounting hardware. Thanks for all the fun videos you've shared.
You could just drill a hole through the plate and the tube and drop in a pin AND that would stop rotation and new way more reliable than glue. Also you can reuse the tube without having a glue mess on it.
Thanks Ed, the info is very informative and greatly appreciated. You are making this hobby simpler and simpler, did I say how much you are appreciated, think I did but just in case I'll say it again, thankyou :-)
Try inserting the 8 mm tube in several inches of a 10 mm square tube (it's a perfect fit) with some hot glue. That gives you a flat surface to attach plate or fuselage.
i attach the tail boom to the fusolodge with a installation foam block by drilling a hole and glueing the spar in it. then sliding the blick in the rear of the fusolodge rock solid without cf
Very nice video. Could pls guide how to make 1.5 m DLG GLIDER ? Because carbon fiber DLG GLIDER are very very expensive . Hope u make some good video how to foamy DLG GLIDER
What are the advantages of carbon fiber tail? I think carbon tube with its fastening - always has a bent in flight and tail hanging out and vibrates A box-shaped tail made of foam remains the best so far!
Great video Ed. Thanks. Any ideas on how to work with the plastic corner bead material? Does it have to be heated in order to bend without breaking or splintering; and the best way to make clean cuts?
Hello I would like to know how you made your Fuselage for this Video! I want to try to make this. Could you help me out. Thanks. I love all your video's #1 nice. your good at this!
How does pricing compare to store bought arrows? Im using aluminum arrows from walmart btw. Sometimes i can even make use of the 8-32 threaded insert where the head screws in.
Whoa, I don't know how I found you. But, thanks for sharing. I've been looking at glider types for a bit and this looks like a great opportunity as a diy project instead
All I can say is GET A 3D PRINTER!!!! Printing small attachment fixtures to transition from carbon fiber tubing to foam components would require only a small printer and they're getting less expensive and better every day. The possibilities are endless. Once you invest a little time using a free CAD program to design the part, you can print the component while you do something else. Three D printing is slow, but pretty much something which doesn't require a great deal of attention. Then it's a matter of assembly along with a spot of adhesive and, bingo, you're done. The act of "fabrication", which includes layout, cutting, sanding, and custom fitting is all but eliminated. Keep in mind that duplicating a design using the techniques called out in this video means that you're starting all over again with the same tedious cutting, sanding, and fitting routine. With 3D printed transition components, you simply print a new part. The design work is already done. Or, even better, print a spare part or two at the same time you make the first one. You gain a great deal from the standpoint of aerodynamics, weight savings, ease of assembly, accuracy of alignment, strength, appearance, and just about every other design consideration you can think of.
I live in Arizona and it seen like you too. Is there a chance I can build my first plane with you. I can pay for the hour if you want. Please and thank you.
Heat the plastic with a hotairgun and bend it to about 100-110 degrees and finally EPOXY the carbonfiber right at the vertex of the "V". Remember to sand the carbonfiber at the end or else it wont bond properly.
The guys at Flight Test and Andrew Newton and your site are my go to sites . I love all your sites as I am a bit new to planes and you guys have the best build videos . I have noticed all of you bend a lot of plastic of all kinds . This is a tool I use for that and if you don't have one you may want to take a look . www.harborfreight.com/plastic-welding-kit-with-air-motor-and-temperature-adjustment-96712.html
+Josh Bishop Better I have my stupid little sticker in case Johnny Law shows up at the field and fight the conflict with the 2012 law in court. Just playing the game.
+ExperimentalAirlines Your right, it will save you some hardship, but should you go through the hardship, you'd be able to cash in. It's only a matter of time before the FAA gets slapped with a massive suit from someone who is fined or arrested, the FAA won't win. Obviously not everyone would want to go through that kind of disruption in their life but the first one to do it will be doing the rest of the hobby a huge favor. I plan on printing out section 336 and putting it on my aircraft but at the same time I chose where I fly carefully and avoid attention.
+ExperimentalAirlines Some battles are worth fighting. This ain't one. Ham radio has far more hurdles and restrictions. The sheer number of pilots (including a tiny subset of fools) makes some form of testing and licensing almost inevitable.
+Chuckles a the regulation needed to happen but the FAA doesn't have the authority. This is absolutely a battle worth fighting, it goes much deeper than whether it should or shouldn't happen. Law breaking is law breaking, the FAA isn't exempt because they failed at enforcing pre-existing laws.
I know the Experimental Airlines designs have always been about cheap or free materials and ease of construction. Ed, you got me back into the hobby with your building techniques, Thank you. I picked up a cheap 3d printer and have been using it to create servo mounts and tail adaptors similar to your corner molding. Not everyone has access to the 3D printing and your methods are wonderful. 3D printers have come down to the "affordable" realm and fit into this hobby well. If you do have access to 3D printing, I recommend giving it a try. It's been fun learning the cad software and actually fabricating custom parts for individual tasks. Keep the videos coming and thanks again!
Between you and the Flite Test forums my scratch building has progressed way further than I could have ever dreamed. Loved these ideas and for sure I will be implementing some of them on my next builds.
Keep up the awesome videos. :)
Appreciate the fine example of displaying the required FAA registration number plus the AMA number indicating financial responsibility .
Hi Ed, great to see you back. Nice practical approach to the use of the booms and can't wait for more details on the discuss. Love the pull/pull.
Very very nice.
I love to tinker in my garage with the crashed plane parts and the material that I find commonly around the hardware store is a positive challenging to me.
Thanks for the info.
Some great ideas on attaching those CF tubes. Would have liked
to see some of those designs in the air.
+lasersbee I wish too. Here's the bummer: I'm reduced to videoing with my iPhone, having gradually killed off all my proper video cameras. Once I re-acquire a camera with zoom, I will make it right with the flying videos.
+ExperimentalAirlines I hear you... Sounds like a plan
+ExperimentalAirlines peter from flite test worked there
Good to see someone doing a video on ideas for connecting CF tubing. Often a difficult situation.
Thank you. This is a very well presented vid by someone with engineering orientation and technical communication skills. It works for me!
Ed, good to see you posting valuable videos again. Thank you. We never got to fly together before you left AZ...Hope you're settled in VA and ready to make more videos!
I'm not a convert to carbon tubes, they seem to twist to much, but you did have some (quite a lot) of idea's that I will put in to practice, Thanks Ed for putting this up.
One advantage of using double stick tape in construction is that it can be removed with alcohol. It's messy but repair is easier when major components are assembled as you have done this way.
Great video Ed. Glad with your return. I was missing your videos.
Ed, You da man! Thanks for figuring out the carbon fiber rod stuff. Nicely done. I like the corner guard and aluminum angle usage. I think you nailed a whole new Experimental Airlines design series!!! Cheers
I used your techniques on my first scratch build... and it flies better than my apprentice.
thanks
Hi Ed, this video inspired me to build a cf stick plane based on some of your ideas mentioned here. I've just maidened it, needs some fine tuning. But I'll post a link to details about it later.
I'm glad your are back Ed...the ideas are stacking up
great vid - using a 10mm boom I have put my servos up front in the fuz, run the snake tubes down the middle of the boom, and drilled exits near the end - the reduced strength compensated by a 1/32 ply tail 'tray'. I really like the reusability and disassembly of your system though.
Genius engineering sir. I know what i'm building when this snow melts.
Very well presented. Excellent ideas illustrated. Thank you.
Hi Ed -
Another great video. I'd really love to see your complete DLG design. It's an area that I'd like to explore, and I'd be happiest getting started at least with a scratch built rather than very expensive purchased glider.
I've been using corner guards in my scratch builds for a long time - great stuff!
Marvelous! This is exactly what I was looking for. Thank you very much, dear Sir.
Thanks for detailed video , it’s very informative , got good ideas to make a stick plane , I was thinking to make a stick plane from a 12 sqmm wood rod , This video will definitely be useful , Thanks again
Have you made the jump to 3D printing yet? I finally did myself and it's extremely useful for making mounting hardware. Thanks for all the fun videos you've shared.
You could just drill a hole through the plate and the tube and drop in a pin AND that would stop rotation and new way more reliable than glue. Also you can reuse the tube without having a glue mess on it.
it nice to see you again
Thanks Ed, the info is very informative and greatly appreciated. You are making this hobby simpler and simpler, did I say how much you are appreciated, think I did but just in case I'll say it again, thankyou :-)
Thanks Ed,
I'd like to learn more about your discus launch glider. I've been wanting one but they're so expensive.
Try inserting the 8 mm tube in several inches of a 10 mm square tube (it's a perfect fit) with some hot glue. That gives you a flat surface to attach plate or fuselage.
+geo dezix What a great idea
Fantastic engineering!!!! Thank you so much !!!
Awesome to see you back!
i attach the tail boom to the fusolodge with a installation foam block by drilling a hole and glueing the spar in it. then sliding the blick in the rear of the fusolodge rock solid without cf
Great video! Will definitely try it. Thank you.
You can also use plywood for the joining plate
Excellent video! Thanks for the great ideas!
Excellent video Ed.Good info.( glad your back up and running )
Very nice video.
Could pls guide how to make 1.5 m
DLG GLIDER ?
Because carbon fiber DLG GLIDER are very very expensive .
Hope u make some good video how to foamy DLG GLIDER
I found these Chinese carbon fiber fishing poles off ebay are a cheap source of carbon fiber tubing. The lengh of the section
Very nice
Elegant solutions, sir!
Thankyou for sharing your great ideas 😉😎
What are the advantages of carbon fiber tail? I think carbon tube with its fastening - always has a bent in flight and tail hanging out and vibrates A box-shaped tail made of foam remains the best so far!
Great video Ed. Thanks.
Any ideas on how to work with the plastic corner bead material? Does it have to be heated in order to bend without breaking or splintering; and the best way to make clean cuts?
Always new idea. Great vid, Ed. Thanks for sharing!
Thank you for all the good ideas!
You have very good ideas ! Thanks for the video.
Drill two holes and then cut into the holes from the end. Much cleaner looking and stronger.
If you don't have the equipment to make a good looking cut like he does that is.
Y'a t-il une place avec vous ?
Dans votre valeureuse baraque
Have you tried a V-tail design plane the corner guard would be perfect for making a V-tail design.
these are awesome sir!
candidate wait to give it a try!
Hello I would like to know how you made your Fuselage for this Video! I want to try to make this. Could you help me out. Thanks. I love all your video's #1 nice. your good at this!
[ Bravo [ l'ingénieur .
thank you for the details!
Awesome man!! just learnirg a lot here!! Keep on going!
You saved my day!
Awesome job!
How does pricing compare to store bought arrows? Im using aluminum arrows from walmart btw. Sometimes i can even make use of the 8-32 threaded insert where the head screws in.
wouldn't it be easier to use the square carbon fiber tube?
Awesome 😎!
Beautiful
What kind of plastic are you using
nice tutorial, thanks Ed!!!
Do you find any signal interference because of the carbon fibre?
those are, how many design tails
What happened to your left hand??
Whoa, I don't know how I found you. But, thanks for sharing. I've been looking at glider types for a bit and this looks like a great opportunity as a diy project instead
your really awsome wish u were my dad
Great, thank you!
Awesome tips thank you!!!
Great information!!!
If I may ask what dia. Push rods do you use?
احسنت 🇰🇼a good knowledge
It is safe to work with fg?
Would this work well on an axon?
All I can say is GET A 3D PRINTER!!!! Printing small attachment fixtures to transition from carbon fiber tubing to foam components would require only a small printer and they're getting less expensive and better every day. The possibilities are endless. Once you invest a little time using a free CAD program to design the part, you can print the component while you do something else. Three D printing is slow, but pretty much something which doesn't require a great deal of attention. Then it's a matter of assembly along with a spot of adhesive and, bingo, you're done. The act of "fabrication", which includes layout, cutting, sanding, and custom fitting is all but eliminated. Keep in mind that duplicating a design using the techniques called out in this video means that you're starting all over again with the same tedious cutting, sanding, and fitting routine. With 3D printed transition components, you simply print a new part. The design work is already done. Or, even better, print a spare part or two at the same time you make the first one. You gain a great deal from the standpoint of aerodynamics, weight savings, ease of assembly, accuracy of alignment, strength, appearance, and just about every other design consideration you can think of.
I live in Arizona and it seen like you too. Is there a chance I can build my first plane with you. I can pay for the hour if you want. Please and thank you.
Arizona is a large state, homme!
I'd like to know if there was any yaw effect because of the offset position of the vertical stabilizer.
+Sidhvin DM No discernible difference in flying, though I'm sure there is a tiny effect.
Nice video, and good ideas.
Tip: you (and we) would be having great benefits from owning a 3D printer for your designs ;o)
how about assembling a V tail on a small carbon tail boom??
Chad Gacs you could use the L shaped plastic at a 45 degree angle.
Chad Gacs you could use the L shaped plastic at a 45 degree angle.
the design is a 100 degree angle for the V tail.
Heat the plastic with a hotairgun and bend it to about 100-110 degrees and finally EPOXY the carbonfiber right at the vertex of the "V". Remember to sand the carbonfiber at the end or else it wont bond properly.
The guys at Flight Test and Andrew Newton and your site are my go to sites . I love all your sites as I am a bit new to planes and you guys have the best build videos . I have noticed all of you bend a lot of plastic of all kinds . This is a tool I use for that and if you don't have one you may want to take a look .
www.harborfreight.com/plastic-welding-kit-with-air-motor-and-temperature-adjustment-96712.html
Way to expensive for shipping to Australia, I'll stick to ebay
Hmm....interesting :)
7:50 You should probably block your FAA number in videos.
way toooo complicated for me..,,,duct tape
Faa Modernization and Reform Act of 2012, section 336.
You've been fooled by the FAA.
+Josh Bishop Better I have my stupid little sticker in case Johnny Law shows up at the field and fight the conflict with the 2012 law in court. Just playing the game.
+ExperimentalAirlines Your right, it will save you some hardship, but should you go through the hardship, you'd be able to cash in. It's only a matter of time before the FAA gets slapped with a massive suit from someone who is fined or arrested, the FAA won't win.
Obviously not everyone would want to go through that kind of disruption in their life but the first one to do it will be doing the rest of the hobby a huge favor.
I plan on printing out section 336 and putting it on my aircraft but at the same time I chose where I fly carefully and avoid attention.
+ExperimentalAirlines Some battles are worth fighting. This ain't one. Ham radio has far more hurdles and restrictions. The sheer number of pilots (including a tiny subset of fools) makes some form of testing and licensing almost inevitable.
+Chuckles a the regulation needed to happen but the FAA doesn't have the authority. This is absolutely a battle worth fighting, it goes much deeper than whether it should or shouldn't happen. Law breaking is law breaking, the FAA isn't exempt because they failed at enforcing pre-existing laws.