Programming an icom ic-v8 2m radio

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024

Комментарии • 42

  • @joeframo3347
    @joeframo3347 10 месяцев назад

    Very good video you did on this absolutely 💯 yes it's a great radio

  • @crlarock6320
    @crlarock6320 Год назад

    Thanks for getting back to me Ben. I know i have 107 blank channels to use, the problem is when i try to enter another frequency it just overwrites the frequency i just entered ! The instructions say that when i enter all my information to hit the D-CLR button to finalize it. I notice at the bottom right i have a ENTER button, I'm wondering if i should use the Enter button and not the D-CLR button. Again Thanks For Getting Back To Me. Rick.

  • @jackgosselin1465
    @jackgosselin1465 4 года назад

    Thank you for the help, I am a ham and had and old icom V8 on the shelf with no idea how to program it. Thanks.

    • @BenTheBondsman
      @BenTheBondsman  4 года назад

      Glad i could help

    • @baronedipiemonte3990
      @baronedipiemonte3990 2 года назад

      That's a damn fine radio (commercial grade). Hang on to it !

    • @BenTheBondsman
      @BenTheBondsman  Год назад

      @@baronedipiemonte3990 mine finally bit the dust. I wish I still had it.

  • @crlarock6320
    @crlarock6320 Год назад

    Great video Ben. My question is how do i add more frequencies without over writing the one i already have.

    • @BenTheBondsman
      @BenTheBondsman  Год назад

      As long as you have empty channel banks, you can add as many channels is it allows. It’s been a long time so I can’t remember how many channels this unit allows for but I believe it’s 99.

  • @BenTheBondsman
    @BenTheBondsman  11 лет назад

    Thanks for the advise

  • @Hffghg374
    @Hffghg374 12 лет назад

    Thank you so much

  • @BenTheBondsman
    @BenTheBondsman  12 лет назад

    @BakersBoyz Yes, feel free

  • @BudiPutraR
    @BudiPutraR 9 лет назад +1

    can you make some video tutorial for deleting channel with that HT?

  • @nenencanlas3279
    @nenencanlas3279 6 лет назад +1

    Help my radio iv com v8 is lock I can't open to set another frequency. ?

  • @BenTheBondsman
    @BenTheBondsman  11 лет назад +1

    No. Its VHF

  • @RelaxingVibes202
    @RelaxingVibes202 4 года назад

    Please make a video on the F3GS

    • @BenTheBondsman
      @BenTheBondsman  4 года назад

      I would love to but I don’t have one. It’s a computer programmable radio. It doesn’t have a keypad.

    • @RelaxingVibes202
      @RelaxingVibes202 4 года назад

      Do they use the same programming software?

    • @BenTheBondsman
      @BenTheBondsman  4 года назад

      You can look the model up on ebay and usually find the software and cable on there pretty cheap. I don’t know if they use the same software or not.

  • @kimnamjoon7538
    @kimnamjoon7538 2 года назад

    Ok

  • @obelawe2864
    @obelawe2864 7 лет назад

    icom v8 how to turn low battery warning alarm when you low bat it will make a noise

  • @faisalnote10
    @faisalnote10 11 лет назад

    Is the device receives phone calls ??

  • @donnapendleton1409
    @donnapendleton1409 7 лет назад

    help...i watched this video and i still can not program my frequencies for my county(police scanner),it is the exact one in the picture! not sure what i have done wrong,can you please do a vidoe on just police frequencies programming!?

    • @BenTheBondsman
      @BenTheBondsman  7 лет назад +1

      Donna Pendleton your radio is likely unmodified. Meaning it will only operate within the amateur radio band. Only MARS/CAP modified radios can operate outside of that. Unless of coarse you are trying to program a frequency that the radio is not capable of. All radios are nut created equally.

  • @faisalnote10
    @faisalnote10 11 лет назад

    is it like icom 2100 ??

  • @sco4p
    @sco4p 4 года назад

    i need help setting up my v86.please any body there

  • @BaeMaxRider31
    @BaeMaxRider31 5 лет назад

    How do you reset the radio? And erase all the stored frequencies as weel

    • @BenTheBondsman
      @BenTheBondsman  5 лет назад

      I don’t know. I have always deleted them one at a time

    • @mudgrippmike3489
      @mudgrippmike3489 Год назад

      to reset, turn radio off. then hold D clr button and also hold the round squelch button that is under the ptt button. Then, push the red pwr button. after a few seconds, the radio will display "clear". All memories will be clear, and radio is reset.

  • @baronedipiemonte3990
    @baronedipiemonte3990 2 года назад

    FCC Regs in emergency involving the safety of human life, you may use any radio/frequency/channel - whether you are licensed or not to summon help. That could be Ham, Fire, Police, etc... And it better be a life or death emergency - it WILL be checked - and if it's not an emergency, you can expect a visit from the Feds who will seize the radio, and serve you with a federal court summons. You can be fined up to $10,000 !A fake Mayday - even on the CB will get you arrested ! The FCC doesn't have many, but they DO have Special Agents with badges and authority to make arrests, searches and seizures. If not one of them, the US Marshals or FBI.
    If you are wanting a two-way radio for use in an emergency, you can get a license for GMRS - General Mobile Radio Service, which is good for your entire family, even if they don't live with you. There's FRS - Family Radio Service, and MURS Multi Use Radio Service which are license free. The FCC recently approved the FM mode on the 26/27mhz band which will be useful.

  • @johankelders5167
    @johankelders5167 Год назад

    9:15

  • @miguelmoncada8187
    @miguelmoncada8187 7 лет назад

    hola, como programo para la opcion de repetidora

    • @miguelmoncada8187
      @miguelmoncada8187 7 лет назад

      tienes wp?

    • @BenTheBondsman
      @BenTheBondsman  7 лет назад +1

      +Miguel Moncada Hola, No hablo español. Para programar la radio a un repetidor, siempre y cuando se conozca el desplazamiento que coloque el offset en la radio. Está en el menú de opciones.

    • @BenTheBondsman
      @BenTheBondsman  7 лет назад

      +Miguel Moncada wp?

    • @miguelmoncada8187
      @miguelmoncada8187 7 лет назад

      BenTheBondsman Hello, we can talk for whatsapp !! good day

    • @miguelmoncada8187
      @miguelmoncada8187 7 лет назад

      BenTheBondsman +573185770910 plsease! Whatsapp!

  • @user-qz6fr5kt3g
    @user-qz6fr5kt3g 7 лет назад

    who to reset ??? my raido lock

    • @BenTheBondsman
      @BenTheBondsman  7 лет назад

      The only way to lock it is to press the function button and the key symbol, just press them again and it should unlock it.

  • @SuperNuaman
    @SuperNuaman 8 лет назад +1

    password reset icom ic f3262dt

    • @BenTheBondsman
      @BenTheBondsman  8 лет назад

      +Nuamam Aswei I don't have that model, you can find the user manual online though