Building A Longer Kickstand ★ CX500 Scrambler Budget Challenge build, Ep.28
HTML-код
- Опубликовано: 12 сен 2024
- Cx500 Scrambler build needed a longer kickstand, This build started its life in my garage as a $1200 budget challenge and It's still under budget, I will reveal the total cost at the end of the build. Parts and tools I use: www.amazon.com...
#LongerKickstandCX500Scrambler #CafeRacerGarage
Welder I'm using: www.cigweld.co...
Plasma cutter I'm using: www.cigweld.co...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for RUclipsrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts and much more!
/ caferacergarage
=====================================================
For all commercial enquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
★ 01. Tools REQUIRED To Build a Motorcycle - Cafe Racer Garage
• Tools REQUIRED To Buil...
★ 02. DIY Motorcycle Seat Latch Lever ★ Scrambler Build - Ep.27
• DIY Motorcycle Seat La...
★ 03. Mounting a Motorcycle Electrics Tray With Rivet Nuts (REMOVABLE) - Scrambler Build
• Mounting a Motorcycle ...
★ 04. How to Cover a Motorcycle Seat - Start to Finish - Cafe Racer Garage
• ★How to Cover a Motorc...
★ 05. Motorcycle DIY Luggage Rack From Scrap | Scrambler Build
• Motorcycle DIY Luggage...
★ 06. Answering Your Questions - MotoVlog - Cafe Racer Garage
• Answering Your Questio...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challange) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================
Such a cool build. Nice work
Love your uncompromising attitude to this build. Even for basic parts. Only perfection is good enough 👍
bikes looking good man
Looks strong enough to prop up a tank! nice bit of craftsmanship
Dtaylo haha 😂 thanks mate, I have a bad habit of over engineering things. but on the positive side at least I know they won’t break lol 😂
Great vid as usual Dan . Great showing taking the larger size then reducing till you get where you need rather than just guessing ..
Great vid Dan. Some nice shots in there. Love the shot looking out the door with the bike in the foreground and the sun going down on a time lapse. Make sure we get shots like that when you are on your adventure. 👍
Kickstand looks great, Dan! Nice work 👌
Thanks mate, yeah I think it looks cool also. I was thinking about adding to it but sometimes simple is better
Great work
Good job!
Nice job.
Need a tab on it to catch with your foot to put the kickstand down.
steven livingston was an idea I had but not sure if I need it as it’s easy to push down without the tab but I know exactly what you are saying as I had the same thoughts 👍😁
Great video! I can't wait to see this thing ride!
Love it! Great job Dan!
Really need to make a stand for my CB... so many comments about its lean 😂 nice work man
Brazil like.....Love café racer
Man, an another incredible video ! Thank you so much !
Laurent Lavie no thank you for the appreciation, it goes a long way 😊
Going to have to do the same on my XJ Yam build. That worked out well. I use oxy for cutting shapes but the plasma looks like it does a top job.
Great fabrication work! Looks good and does the job. You just convinced me to do my own stand, I was trying to figure out what to do to make the stand on my bike stand clear my new muffler - answer is of course to make a new one :)
Erik Greisson That is fantastic, I’m glad I inspired you to give it a go yourself.
Always look forward to your videos 😁
Nice video, can you give us an idea of your painting method for parts like this to get a durable finish? Cheers
Powder coat will always be the most durable! I prefer spray cans for budget builds though 😁
Needs a bad ass rear mudguard imo
Hi, nice job, much better like this. Mine looks the original and looks a bit short too. Where all like this ? Thanks , Gus
The Rock/Paper/Scissor thing was hilarious. Dude .. I would cagefight a kangaroo to have a beer and a chat with you ..
👍 from Bavaria 😂
Sure did 👍 nice job there m8 : )
this build is totally rad brother. Could you MIG weld that side stand if you didnt have TIG?
How's that budget going? Still on track? 😉
Chiefpep so far so good 😊 fabricating everything myself definitely saves a lot
sua moto é top👍
saludos desde España, eres un artista
What's some good advice for not feeling overwhelmed on your first build. I can't yet do somethings I'd like but, I'm feeling this way and it's causing a bit of a funk
good job!!
What's the point of the rubber on the stand ?? lol , thanks
Good job! The original kickstand is really ugly. This bike really is the ugly duck turning into a swan!
My bike leans too much so I am going to cut the kickstand and add about a half inch section to it.
Another awesome video. Where did you purchase your bench grinder? Keep up the good work 🤙
Sam Newberry it’s actually called a belt grinder and it’s amazing 😉. it’s made here in Australia. He ships worldwide and the company is called 84engineering. Tell him I sent you if you want. He may even give you a discount.
HI, What happened to the new Ultra 185 welder? did it break already or do you prefer the old manual machine better ?
Andrew Palmer the 185 is prominently a mig and I love Tig welding so I use a Tig welder where I can. The 205 ac/dc has a lot of control and very nice to use.
You will still see the 185 in action don’t worry 😉
My original side stand 1981 cx500c stands up too straight, I have to look for a left leaning ground area, or a sneeze will tip it over. Don't have the means to weld. Thinking about heating till red and bending it.
Im not sure about the diameter of all kickstand tubes . Not the same bike, but I cut a section out of mine and used a tap to thread the inside for 3/4" all thread, with a couple of jam nuts ,made it adjustable. No welding.
☺
Well done as always good sir. Out of curiosity, how have you done with sticking to the original goal of keeping this build under $1200? I don't think we have seen an update on that in a while...
Revving Rebel very true and considering the bike is almost at the completion stage I will do a total cost at the end, I think I’m still under budget due to fabricating most of the stuff myself as long as I don’t pay myself for my time we are all good LOL
hi, what is your opinion of the cigweld tig? i'm looking into buying one.
I should have a video coming out on it soon, However, to answer your question it's incredible.
Hi bud, you mentioned the rear shock' what kind is it ?. You doing a video on it?.
Good work tho mate keep it up..
I believe he does go over his rear shock set up in previous videos stating that they were 13 inch eye to eye (I could be incorrect though).
Hey Dan, if you get this, can you post a link to an equivalent belt sander from amazon like your 84 engineering belt sander. I am not sure I can get them/would be cost effective to ship to the States.
sir good day..just want to ask for advice if cigweld transmig 175i is durable and good quality, thanks a lot in advance
lester ace vallespin very good quality. their parent company Esab is A world leader in the welding industry so you could say that they know what they are doing. Yes the 175i is a great welder
thank you very much sir,this message from you helps a lot to me..one last thing..is it ok to use pure argon on this 175i sir?
☝️
who can explain what the rubber block/flap is on the side kickstand?
Made.at.the.boneyard its for when the kick stand is in the up position. My manual said something about replacing it once it wears away but it's just an added 0.05lbs
@@xTHATSFIVEx what function would that block have in the up position then? I always thought it was when you put the kickstand on the ground, that the stand would not slide away when there is play on the kickstand axle..
In my native language we have a adjetive for people like you, but in english there is no translation, so here is something similar:
Capricho/esmero: carefulness, care, neatness, meticulosity, meticulousness, punctiliousness, scrupulousness;
2) Caprichoso: careful, neat, meticulous, punctilious, scrupulous.
Regis Souza Thank you so much mate that’s a really nice comment
stop looking at yourself when filming. look into the lense