What an absolutely gorgeous truck ! Could you imagine looking at her when she was new sitting on the showroom floor.!! I'm from Winnipeg and am very jelly of some of your toys. 😊😊
my grandpa bought the 45 chevy brand new and was hit by a train in 1947. they fixed the cab and was using it for a long time after. then in 1980 we found the truck and slowly getting it up and road worthy. these old chevys were tough when new and still tough 80 years later. yes Sir Rodney is from Winter-peg too. thansk
The snow truck did better than i thought it would after you spun at first. There's nothing some weight won't cure on the back of the snow truck. Our temps have dipped. It's -20 right now. Suppose to be -34 by Wednesday. The fireworks will be chilly to stand out and watch. Take care.
totally the wrong conditions plus tire chains are not tracks. once we built tracks and get the skis on the front then it will float right along. cold for wednesday for us thansk
I'm thinking that a little bit of extra weight on the back end of the snow truck will probably help it have some better traction... Very cool project, Joey. Fun!
Morning from Gagetown, nice to see the snow truck moving. It does sound good. I’m sure you will fine tune it so it runs excellent, thanks for the great video, hope everyone has a great day 🇨🇦🇺🇸🍺🥃
@ I have a chance to get a rolling chassie 1951 chev, with a 216 motor, and transmission, with steering column. With a milk crate for a seat he says it’s a yard runner. No rad, so short runner. All tires holding air .
the tire chains were for in the summer to drive around since the idler axle was lifting up the drive axle. the idler axle needs to be the track tightener when the tracks are built thansk
The snow truck is awsome ride!💪yes!!! Looks sinister! I especially like how you blacked out the glass !!!! Yes ! Looks a tad Knotty!!-! Lol yes Knotty!!!!💪👺lol!!!!
Good morning from Cape Cod ⛵ 53 ° at 3:06 in the morning, Wow. The 39 Chevy half track pulled up out of that snowbank like nothing, you might need some Rain-X for that windshield 😉 Xena, obviously you have some great skills on the mini, does the same go for all the equipment? I bet it does. It should be interesting once you put the skis on the snow truck and see how well it does. Thanks guys for another great video ✌️🇺🇲🇨🇦
I use a lot of the magnet heaters on the oil pan + the block heater . Even use one on my 460 farmall its on the cover for the hydo fliter , that way i have power steering right away , other than waiting for the transmission fluid to get warm when its - degrees out . 😊
No big shed , just the great out doors. I have to do all my maintenance work in the hot sun or the cold , but that what make a man a man , just like you . Keep up the great work & video's. 😊 peace from N Dak . 😊
Looks like a lot of fun to be out there driving around in that snow I'm from Buffalo New York in the United States one setting we could get like 7.8 feet or even more than at one time my dad drove for 16 hours in a jeep push all those front wheel drive cars out of the way anyways thank you for the video
Yah, 20yrs, I rebuilt a Ford 2150 2 barrel carb with a NAPA. Following directions for the job was the hardest part. The kit had parts for every single application, not just the Jeep stuff. Staying tuned 😎👍
@@andydubois8411 just 1 question King? I see a pumpkin on real wheels of.course but axle set ? So is it just the higher back with the chains that pulls and pushes those ????? Or is that a true double axle ???? I guess i just couldnt see the it but on vidios it looked like it actually had power like a great illusion !!!! The man they call Ravine!!!! Lol
Another 39 Chevy, the snow truck. Good job building that from scratch. Those Chevy straight sixes are great. I have owned a 235 and several 250s. I think they made a 296 too. Tons of torque.
yes the Snow Truck was the parts truck for almost 40 years now we will juts drive the parts around instead. it was the 292 which was an excellent work horse motor thansk
My 1964 IH tractor does pretty good in the snow. I have a 7foot plow on the front and a 7 foot blower on the back. Wish it was power steering and had 4wd but have to make due with what I have for now. Cheers
@@kingofobsolete4789 dont get me wrong . If I had lots of money I would have nice things but I have what I can afford without debt. Best I can do. Cheers
00:34 ''The dog is shedding, that's all it does.'' Be thankful that it is only shedding, and not a bunch of other verbs that end in '' -ing '' in the house. Lol ! Shedding is the easiest to clean up !
Hey, the snow truck learned how to waddle, like a Linn, well, kind of.... Is it a coincidence that the front of the Snow Truck looks a lot like the King of Obsolete ??? (Dark Shades)
Our heatwave here in the interior of Alaska ended again. We were +26°F 2 days ago, now at 1830 it's -24°F. This is more normal for this time of year. Have a great day.
@kingofobsolete4789 I don't know how far you might be from pembina north Dakota. A lot of people have packages sent to Mike's border parcel you can come over and pick up things save a lot.
Appreciate the detailed breakdown! I have a quick question: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
I like to use former, remember she is the mother of your well spoken confident daughter. Details are past history and life only has one direction, forward. Yes I am once divorced with a daughter near your daughter's age, like your daughter a success. As a member of the Lions, Be Kind and yes I love Elon Musk,
Ballast Resistors and "R for Resistor" type spark plugs rob the efficiency of the engines elecrtical system leading to poor performance. I hate Ballast Resistors with a passion, YES... Do you know about Chev's of the '40's for old Chevy truck parts?
we are finding these new parts purchased are not of any quality any more. an HEI ignition will be installed in this motor very soon. yes we buy from chevy of the 40s and Jim Carter old chevy truck parts. it is nice to order parts for 80 year old vehicles on line thansk
@@kingofobsolete4789 I know the struggle. I have a W.W. 2 Chevy 4X4 and an M-29 weasel. It has taken me 4 years to find an old school machine shop to rebuild the engine for it.
@@w.w.2restorations.vehicles698 yes and you sometime have to travel to find the right place to fix it. some times the local shops can't handle it thansk
😂😂 what he nd is a straight 6 300 Ford granny transmission 4 sp standard and 4x4 lockers front and rear and he will be set up for life jjjjj 😁 .I'm from upstate NY and my mule is a 1996 Geo tracker 16 valves custom made with junkyards parts jjj 😁 with 31 x10 tires and 15x10 wheels one in lift on front locker in front and rear I build it myself and have high and low and 2 wheels and I can say is a beast header aluminum crank pulley free flow exhaust system homemade gd air filter with a 272, cam regrind and he start in the morning 20 to 30 below with the windshield sometimes out here like nothing but I usually put 6 once of marvel mystery oil to kp nice thin oil for the morning in cold weather mix with 5 30 oil never any problems plus I put some marvel mystery oil in the automatic transmission like I said starting in the morning no problem and going through the high snow neither plus I work in the grapevine fields believe me a lots of snow and my little Geo tracker 16 valves , 4x4, go through snow like nothing I build a little mule jjjjjj 😁 gd video
we are all chevy here in the Kingdom. the 39 chevy snow truck was assembled with parts from the parts shelve. those geo trackers were popular up here at one time. thansk
@kingofobsolete4789 I love old food straight 6 300 English and 289 ho jjjj I live the 283 to yeap I have my old 2 door Geo tracker 16 valves still rock and roll in the byouooooo CCR hell know I don't sale it gd on gas cheap to maintenance and last for ever with maintenance better than others crowded like a spider jjjj
@kingofobsolete4789 your channel is great but for some reason scam ads are just plauging the internet its all the channels i watch right now the one that set me off was free habor frieght tool just give them all your info to get in a drawing im 99% sure it's fake
What an absolutely gorgeous truck ! Could you imagine looking at her when she was new sitting on the showroom floor.!! I'm from Winnipeg and am very jelly of some of your toys. 😊😊
my grandpa bought the 45 chevy brand new and was hit by a train in 1947. they fixed the cab and was using it for a long time after. then in 1980 we found the truck and slowly getting it up and road worthy. these old chevys were tough when new and still tough 80 years later. yes Sir Rodney is from Winter-peg too. thansk
The snow truck sounds like the 4 horsemen of the apocalypse with the chains
never thought it would even drive 2 feet head, lol thansk
Joey not only has the most toys....he knows how to build, fix and drive them...very talented, Xena too...
yes as we live at the end of the world having fun thansk
Wow! I thought that the snow truck was dead, Boy was I wrong. The KoO is BOSS!
we had to wait for parts and now good to go thansk
The snow truck did better than i thought it would after you spun at first. There's nothing some weight won't cure on the back of the snow truck. Our temps have dipped. It's -20 right now. Suppose to be -34 by Wednesday. The fireworks will be chilly to stand out and watch. Take care.
totally the wrong conditions plus tire chains are not tracks. once we built tracks and get the skis on the front then it will float right along. cold for wednesday for us thansk
Wonderful equipment!!...It is a dying art to be able to work on this older equipment...really great video...Thank you for having us with you..-John
thank you we are just having fun,,, we think thansk
"let the motor pull" reminds me of my Dad's advice for not getting stuck - "Stay just ahead of the stall."
yes good in farm trucks fully loaded in the field thansk
I'm thinking that a little bit of extra weight on the back end of the snow truck will probably help it have some better traction... Very cool project, Joey. Fun!
we have to make it light as possible, proper tracks and skis on the front it will work better thansk
Great stuff King. Keep up your great work Sir.
will do as we are all having fun thansk
Rock & roll excellent 😊
that is what i am listening too thansk
🥂👑😎
Can’t wait to see it with skis.
the trees won't be too happy untill we get the skis to be able to make the turn thansk
The snow truck is a work of art, it looks fantastic!! 🙂👍
thank you, just left over parts thansk
Love your chain tracks! Pretty slick
we tossed them on to move around in the summer never thought we would be able to drive on snow thansk
Great ... 👍
got the snow truck out during the heat wave
Lol awesome video love the jokes awesome
yes would have been better to wait until it was cold thansk
@@Westernmassoutdoorboys it is amazing what i say sober, lol thansk
Enjoy the beverage, snow truck is pretty cool
i am and thank you thansk
That looks like a beautiful 1939 REO made of parts.....really cool!!
yes better to drive the parts around then move them by hand like we did all those years thansk
Morning from Gagetown, nice to see the snow truck moving. It does sound good. I’m sure you will fine tune it so it runs excellent, thanks for the great video, hope everyone has a great day 🇨🇦🇺🇸🍺🥃
yes those 216 are a tough motor and will run for ever thansk
@ I have a chance to get a rolling chassie 1951 chev, with a 216 motor, and transmission, with steering column. With a milk crate for a seat he says it’s a yard runner. No rad, so short runner. All tires holding air .
@@billreynolds1749 nothing wrong with that because it is complete. thansk
You sir are totally hilarious, I can relate to your daily adventures 😂
thank you life is fun when you have fun thansk
Glad we finally got to see the great snow truck in action!! It worked great but a little extra weight may help
we have to keep it light to travel over the non frozen areas. the warm snow made it hard to walk and very surprised the Snow Truck even moved thansk
Snow truck rocks🤘
once again you are first to comment thansk
Great to see all these old fords in action.
oh my, the only ford is the Screaming Ford from the TV show Ice Road Truckers, lol thansk
Awesome testing!👍🏽😊❤️🇺🇸
yes just fine tuning needed thansk
Thought about a set of treads on the back? You already have the chains to build out on.
the tire chains were for in the summer to drive around since the idler axle was lifting up the drive axle. the idler axle needs to be the track tightener when the tracks are built thansk
The Jack Daniels inspired snow truck went better than I thought it would. It will be interesting to see it with the skies on the front of it.
yes those tire chains were used in the summer to move it around, never thought it would move in wet soft snow thansk
The snow truck is awsome ride!💪yes!!! Looks sinister! I especially like how you blacked out the glass !!!! Yes ! Looks a tad Knotty!!-! Lol yes Knotty!!!!💪👺lol!!!!
slowly coming together as we are having fun thansk
LOVE WATCHING YOUR VIDEOS
me too, lol thansk
Good morning from Cape Cod ⛵ 53 ° at 3:06 in the morning, Wow. The 39 Chevy half track pulled up out of that snowbank like nothing, you might need some Rain-X for that windshield 😉 Xena, obviously you have some great skills on the mini, does the same go for all the equipment? I bet it does. It should be interesting once you put the skis on the snow truck and see how well it does. Thanks guys for another great video ✌️🇺🇲🇨🇦
yes we were surprised that tire chains actually let ti drive around in the snow wet snow. we will be building the proper track for it. thansk
Cruise the Dairy Queen!
Stayin tuned! 👍🤠 🇺🇸
need a few improvements first so we are not walking back thansk
@@JohnShinn6078 😎
I use a lot of the magnet heaters on the oil pan + the block heater . Even use one on my 460 farmall its on the cover for the hydo fliter , that way i have power steering right away , other than waiting for the transmission fluid to get warm when its - degrees out . 😊
yes sounds like my 922 loader, get it running then wait for everything else to warm up. that is why it got put in a small shed to stay warm thansk
No big shed , just the great out doors. I have to do all my maintenance work in the hot sun or the cold , but that what make a man a man , just like you . Keep up the great work & video's. 😊 peace from N Dak . 😊
Cheers guys excellent 😊😊
thansk
Looks like something out of a movie
yes as we have fun thansk
Looks like a lot of fun to be out there driving around in that snow I'm from Buffalo New York in the United States one setting we could get like 7.8 feet or even more than at one time my dad drove for 16 hours in a jeep push all those front wheel drive cars out of the way anyways thank you for the video
yes you guys in Buffalo are know for huge amounts of snow because of the lake effect. i know i could not live there with that much snow thansk
Yah, 20yrs, I rebuilt a Ford 2150 2 barrel carb with a NAPA. Following directions for the job was the hardest part. The kit had parts for every single application, not just the Jeep stuff. Staying tuned
😎👍
yes lots of extra piece but lots of important pieces that don't fit thansk
@@andydubois8411 just 1 question King? I see a pumpkin on real wheels of.course but axle set ? So is it just the higher back with the chains that pulls and pushes those ????? Or is that a true double axle ???? I guess i just couldnt see the it but on vidios it looked like it actually had power like a great illusion !!!! The man they call Ravine!!!! Lol
216….babbit pounder good engine it will run great with very little effort….set your carb float and off it will go…a great engine! Steve
yes good motors and just could not have this one sitting in storage so it went in tot he Snow Truck. will fine tune the carb. thansk
Another 39 Chevy, the snow truck. Good job building that from scratch. Those Chevy straight sixes are great. I have owned a 235 and several 250s. I think they made a 296 too. Tons of torque.
292 Chevy also GMC 270 was hellava
yes the Snow Truck was the parts truck for almost 40 years now we will juts drive the parts around instead. it was the 292 which was an excellent work horse motor thansk
@@kingofobsolete4789 yes, 292. Not sure where I got 296?? Lol.
@@tomarmstrong4156 yes, 292, not 296 lol, I must be getting old and forgetting stuff
I love the snow truck . That's awesome .
slowly coming together thansk
Snow truck worked well,no snow in Massachusetts 45 degrees weird weather down here
that is not good, no snow means it will be too dry thansk
Crazy ride man bits n pieces put together its a groovy thing fer sure great video
yes parts on the shelves now drive around and more space in the storage trailers thansk
Well i guess an antifreeze tester makes a good stand in for a turkey baster when needed lol you guy are fun
yes we learned a long time ago not to pour down the carb instead spray a little bit in thansk
You should call the snow truck Stevie Wonder with that windshield
yes or paint some eyes on like Mator in the film cars thansk
My 1964 IH tractor does pretty good in the snow. I have a 7foot plow on the front and a 7 foot blower on the back. Wish it was power steering and had 4wd but have to make due with what I have for now. Cheers
yes use what you got and don't buy anything fancy to keep up with the new generation thansk
@@kingofobsolete4789 dont get me wrong . If I had lots of money I would have nice things but I have what I can afford without debt. Best I can do. Cheers
@@frankz1125 that is the way to do it and more people should be like that thansk
@kingofobsolete4789 cheers
00:34 ''The dog is shedding, that's all it does.''
Be thankful that it is only shedding, and not a bunch of other verbs that end in '' -ing '' in the house. Lol ! Shedding is the easiest to clean up !
yes we know, being rescue puppies they have issues thansk
Hey koo good idea😮
i was sober too thansk
I have made a windshield out of clear plastic. 2 liter pop bottles and clear packing tape. He had to warm the plastic bottles to straight them out
yes when the time comes we might be doing that thansk
Once the skis are on, it will be a KoO Tractor.
yes will all the improvements a linn tractor or bombardier never had thansk
Hey, the snow truck learned how to waddle, like a Linn, well, kind of....
Is it a coincidence that the front of the Snow Truck looks a lot like the King of Obsolete ??? (Dark Shades)
once we make the proper track it will do better and the money tree needs to blossom so we can get some plexiglass thansk
As a mechanic, this video really drives home how much I hate cars. And nature.
yes retirement is so much better thansk
Sum times I feel like a poop Sunday morning LOL
well that is good thansk
The snow truck is awesome
I have been thinking about building something like that 👍👍
@@caddydaddy6728 consult with Jack Daniels first thansk
King Joey I thought you was driving using the bump steer or Braille method 🤔. And yes that snow truck looks like a neat halftrack . 😊😊😊
we thought it would drive any where being so warm and those are not tracks yet thansk
216 is a slosh oiler!
yes with 15 psi of oil pressure thansk
Snow truck is pretty cool! 39 Chevy?
thank you, will be a while to complete it thansk
38 below this morning in Fairbanks warming up by Monday
excellent then we will get your warm weather by wednesday thansk
Our heatwave here in the interior of Alaska ended again. We were +26°F 2 days ago, now at 1830 it's -24°F. This is more normal for this time of year. Have a great day.
yes our heat wave will be over then back to a normal temperatures thansk
Whats insurance run for the snow truck?
Canada? More like Canastan.
Keep the Anti-freeze flowing🍺
insurance means nothing up here in this frozen wasteland we call home thansk
New to the channel
thank you for joining thansk
Was that your brake pedal resting on the floor?? In the Snow truck.
yes that way it gives more room when wearing snow boots. thansk
Snow truck work's well it needs some weight and I think it will go anywhere
once the real tracks are on it will go any where there is snow thansk
4:08 Another foot of snow and you won't even know that poops there.
yes that is true thansk
Xena hope you scooped the poop before putting the minni away😂
i did it for her thansk
Sorry busy here (in the bedroom) talk to you later 🍺😀
oh my Bath & Treat Night, lol thansk
One more thing about the 216 if it is like our 52 Ford with no resiter the points will burn out pretty fast
we have no luck with points up here so this one will get changed out to the HEI ignition thansk
Don't step in the 💩🤣😂👍🇺🇸
i try not too thansk
21st maybe 😊
close thansk
21 is a pretty good number I'd say!
Yes it is excellent guys cheers 🥂
King are you able to find all the correct tire that you need for all your different vehicles. Cheers and Happy New Year. 🍿🥃
yes the tires seem to be easy now days. 20 years ago it was hard thansk
Q: What're you using for the front windshield? Assuming the dark tint is to avoid snow blindness?? Question answered @ 20:00, Thx
when the money tree blossoms we will be getting Sir Rodney to send plexiglass to the end of the world for us thansk
I hope you remembered to clean your vacuum…
it was in the back ground at 1:48 minutes just forgot to grab it for the intro thansk
I've had really good luck with carbonators through summit racing.
yes and i did with rock auto but the shipping costs are 4 times the price of the item thansk
@kingofobsolete4789 I don't know how far you might be from pembina north Dakota. A lot of people have packages sent to Mike's border parcel you can come over and pick up things save a lot.
@@RickRaddatz-g6v yes when i grew up in brandon MB it was common to do the shipping like that. but now i am about 1400kms from the border thansk
Put grourser on the chains.
better yet build the proper tracks thansk
Is that a clear plexi glass cab on the mini??😂
no we took the canopy thing off to get it in the Hoe Shack thansk
You forgot to empty sweeper today
at 1:48 minutes it is behind my should on the back of the Snow Truck, just forgot to grab it to show the world, lol thansk
@kingofobsolete4789 thank you for answering my reply
@@edkeefer4950 yes we do the videos in 1 take so mistakes and all thansk
👍👍👊
thansk
Appreciate the detailed breakdown! I have a quick question: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?
no idea, i know nothing of computer money thansk
I like to use former, remember she is the mother of your well spoken confident daughter. Details are past history and life only has one direction, forward. Yes I am once divorced with a daughter near your daughter's age, like your daughter a success. As a member of the Lions, Be Kind and yes I love Elon Musk,
🔥😎
yes life is what you make of it no matter how bad things get. always think positive and smile and wave thansk
How s the heat in the sno truck and does it defrost the windshield
@@jliketheletter637 lot of heat because the exhaust pipe is right there thansk
Why the super dark tint on the front windows? Or is that paint?
plywood and paint because that is all we had thansk
👍🚜
thansk
@ your welcome 🚜👍
That display was Great
just having old school fun thansk
😮😮😮
thansk
👍🏻❤️
thansk
Ballast Resistors and "R for Resistor" type spark plugs rob the efficiency of the engines elecrtical system leading to poor performance. I hate Ballast Resistors with a passion, YES... Do you know about Chev's of the '40's for old Chevy truck parts?
we are finding these new parts purchased are not of any quality any more. an HEI ignition will be installed in this motor very soon. yes we buy from chevy of the 40s and Jim Carter old chevy truck parts. it is nice to order parts for 80 year old vehicles on line thansk
@@kingofobsolete4789 I know the struggle. I have a W.W. 2 Chevy 4X4 and an M-29 weasel. It has taken me 4 years to find an old school machine shop to rebuild the engine for it.
@@w.w.2restorations.vehicles698 yes and you sometime have to travel to find the right place to fix it. some times the local shops can't handle it thansk
💩🤣🤣🤣🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🥃🥃🍕🍕
thansk
😂😂 what he nd is a straight 6 300 Ford granny transmission 4 sp standard and 4x4 lockers front and rear and he will be set up for life jjjjj 😁 .I'm from upstate NY and my mule is a 1996 Geo tracker 16 valves custom made with junkyards parts jjj 😁 with 31 x10 tires and 15x10 wheels one in lift on front locker in front and rear I build it myself and have high and low and 2 wheels and I can say is a beast header aluminum crank pulley free flow exhaust system homemade gd air filter with a 272, cam regrind and he start in the morning 20 to 30 below with the windshield sometimes out here like nothing but I usually put 6 once of marvel mystery oil to kp nice thin oil for the morning in cold weather mix with 5 30 oil never any problems plus I put some marvel mystery oil in the automatic transmission like I said starting in the morning no problem and going through the high snow neither plus I work in the grapevine fields believe me a lots of snow and my little Geo tracker 16 valves , 4x4, go through snow like nothing I build a little mule jjjjjj 😁 gd video
we are all chevy here in the Kingdom. the 39 chevy snow truck was assembled with parts from the parts shelve. those geo trackers were popular up here at one time. thansk
@kingofobsolete4789 I love old food straight 6 300 English and 289 ho jjjj I live the 283 to yeap I have my old 2 door Geo tracker 16 valves still rock and roll in the byouooooo CCR hell know I don't sale it gd on gas cheap to maintenance and last for ever with maintenance better than others crowded like a spider jjjj
@kingofobsolete4789 mean straight 6 300 Ford and granny transmission 4 sp np 435
Is it my imagination or are like 95 % of the Comercials on eveyrbodys channnel scams
no idea thansk
@kingofobsolete4789 your channel is great but for some reason scam ads are just plauging the internet its all the channels i watch right now the one that set me off was free habor frieght tool just give them all your info to get in a drawing im 99% sure it's fake
I'm having beer now. 🍺
good plan thansk