10 Life Hacks with PVC #5
HTML-код
- Опубликовано: 9 июн 2024
- 10 Life Hacks with PVC #5
This is the 5th Edition to our 10 Life hacks to make your life easier. We built and tested each of these with success. I hope you can benefit from some of these awesome life hacks.
First 10 Life Hacks video:
• 10 Life Hacks with PVC
Second 10 Life Hacks Video:
• 10 Life Hacks with PVC #2
Third 10 Life Hacks with PVC video:
• 10 Life Hacks with PVC #3
Fourth 10 Life Hacks with PVC video:
• 10 Life Hacks with PVC #4
Fifth - Watching
Sixth 10 Life Hacks with PVC video:
• 10 Life Hacks with PVC #6
Seventh 10 Life Hacks with PVC video:
• 10 Life Hacks with PVC #7
Lifehacks are great techniques, tricks, shortcuts, or novelty ways to use certain products in uncommon ways to make life easier.
Please Like and Comment
Just remember that PVC is only a form of hard plastic. It can and will break if too much weight or force is applied and injuries can occur. Please use caution when using anything made from PVC.
The Ultimate Life Hack: John 3:16-17
More PVC Projects you will like:
PVC Dog Wash - Pet Life Hacks
• DIY Dog Wash - PVC Dog...
PVC Cat Bed Hammock
• How to make a Cat Bed ...
Use of video content for personal projects is at your own risk. - Хобби
Those Toilet bowl fittings are also good for holding up your portable propane torch so it does not fall over and burn something you don't want burned.
+Warren Smith Nice idea
I love these ideas
You have great ideas that rag pipe can also be used for plastic shopping bags
I have found that PVC pipe is also useful for transporting liquids from one place to another.
I just found your videos and am going through all of them. On that underwater viewer you can get thin wall white drain pipe that already has a black inside and that eliminates the painting.
Thanks for sharing your ideas. I am planning to do some....😊
Very creative love it
wish we had youtube when I was a kid. This is the 5th section I have seen today and most of them would have been great growing up. Way to go with everthing and keep making them.
+Joseph Christina Thank you very much
Buying a cutting board for the kitchen is expensive.Use 4" pvc as a cutting board.Cut the length you want, then cut it in half. Use heat gun to strighten it out.
For your rags idea, go to garage sales and find golf towels. High quality towel and usually have a grommett attached and a shower curtain clip on them so you can hook that to your belts as you work and always have it handy. The clip can also be hung to a nail in the wall of your shop or several spots in your shop.
You're quite brilliant!! Thanks for the great ideas
you could use pvc, painted any color, in the kitchen for all of your spoons, flippers, spatulas, etc. also a fishing idea i tried was that i used a 3 inch pvc with end caps about 12 inch long and tied about 10 ft of para cord around it to my dads fishing pole bottoms. that way when he loses a rod it will float to the top. we use a similar idea for a minnow trap. just drill holes through a 3 inch with end caps and hang it out of the boat
Nice ideas and good thinking
you really like pvc pipes.. I bet you dream a pvc house in a pvc forest where the river of pvc pipes runs under a pvc rainbow .. i like it
Mars Seeker Sir you are a legend
I love the cat that keeps following you around!!
Another great video!
+TheLightHouseLady Thanks
Much much compliments from Tanzania
Rather then empty bottles why not use Old or new pool noddles in place of the bottles for your floats.
You are the man when it comes to pvc.
Your pvc pipe for garage rag storage.....that would also work well for supermarket plastic bags.
Andy Andrews is my favorite author as well.
Love your videos. I've always loved making things with everday items that you wouldn't think of using.
Thanks for such unique ideas
i have no words , its emotional but in the same time JUST BEAUTIFUL
👏👏👍👌💚loved it .
Thala... U'r prasant is wonderful
I have a great idea, use the pvc for plumbing works every time
thank you i can use most of them
super kool
That one you made to hold the cups in the water - if you do it with wires and light fixtures instead of water bottles on the ends it could be outdoor lighting. Just a suggestion.
fantastic video bro, good luck
You have a great taste in literature. I've known Andy Andrews all his life. I don't have to tell you what a great guy be is. Thanks for your videos.
Love these... Thanks for sharing the ideas!
+DilloTex Thank you
muy original, muy buenas ideas
gracias
A friend of mine from years ago wanted to string her Speakers from her family room into the Dinning Room and the Living Room. But at the time, wireless was not around and the wires were going to be insane to control. Her house was a slab foundation with pretty much no crawl space in the roof top area. So, we put holes in the walls at the bottom near the floor. We put a piece of PVC in the hole with flange like caps on both ends. So that she now had a small tube going from one room to the next to send her wires through. Looked great and worked really well. No holes for bugs to get into the house, and was clean looking to those that might have seen it.
re: pvc fitting are expensive...I buy them at yard sales whenever I see them and store them in my shop for projects. When you start thinking about pvc it just appears. Stay positive
You have great ideals!! Thank you for sharing with all us!!
I
so usefull. thanks sir !
Keren bro... Smart and kreatif... Tapi sulit mendapatkan 4 ways pvc connector nya....
You are a PVC expert man...i like your videos..I use PVC pipes in my garden for deep rooting system,i drill holes on it and dig it near small tropical trees..also i use it for stump protection ,to avoid damage from mowing and edging..
I LOVE this guy! Its like watching "This Old House" for PVC Hacks! I LOVE the lilt of his voice, his timing, and all the ideas in his brain!
Thank you very much!
In case you are wondering, I will have more PVC videos to come.
Gosto das suas ideias, parabéns.
If I saw that mailbox, I'd be like "Who in the fuk lives here? Mario?
nice and cool buddy
love number 7,9,and10
Very creative I love it
Thank you
good ideas, thanks for your creations
Muy bueno, buenisimo❗👋👍😛
Lo saludo desde Argentina ❗👋😛
Great clips. Like to see a clip with a speaker stand for shelf speaker around 3 feet high.
This is my home solution Side.
I continue watch it. I Suggests easily instruments maka a Videos.
I want to build all of these!!!!!! Great work Specific Love!
Can you add a mountable PVC tool rack in the next PVC life hacks?
I had a suggestion for another way of doing a bungee cord holder. What about making something more similar to your wall shoe holder except that there are holes drilled across the top of the PVC to hold the hooks of the bungee cords. Then the bungee cords aren't under tension. And it's easy to spot the length. This wouldn't be portable but it would be an easy way to wall-mount it in a workshop . 😊
+Allyse T Great idea
Great ideas to up cycle those PVC pipes! Videos are very well made and preparation to this end is evident. I am inspired to get to work and replicate some of these ideas and/or, come up with other uses for these great pipes!
+chelin7023 Thank you very much.
PVC, the new Duct Tape.
No. 4 Pvc hack you can also store more bungees inside the pipe to get more room. Kind of mirroring the outside in the inside. Reversible hack.
You can cut bigger holes & it shouldn't be too cumbersome to unhook & release bungees.
It's more of a rhetorical question. If your bothered, you do it & prove me wrong.
+Matthew Livingston
I think he already proved you wrong.
Alaska Bruce says the troll
Just shut up
i love pvc
I made a PVC adjustbale weight Macebell for working out. Absolutely love these videos dude.
You can take a piece of 3" or 4" PVC pipe and cut notches in it along one side a touch bit bigger than a CD case. Attach the toilet flange to the bottom and you have a CD stand. It can be painted to suit you fancy or add a light in the bottom to make it a dual purpose fixture. The bungee cord holder is great for holding some tools or other vehicle related items as long as you seal one end by setting the plug back into it.
+Todd Tourville Nice ideas
Re #9. If you want a hiding place, you can do 2 things. 1) the hollow 4" table legs can be filled with the things you want to store/hide
2) do the same as #1 but in the 3" pipe that would be inserted into the 4"
You would have to ensure easy access from the foot of the leg if you are going to use frequently. Or have the legs secured having only access with a screw driver or something to that effect.
The place where I do archery uses the same thing that you showed for the door/table hack to hold arrows. They use the smaller one and it works great! :D
Add a string to your cup holder to tie to your floating unit so it will not float away.
The use of slip x thread male adapters with a female threaded cap works better than male threaded plugs as this system prevents grit from binding the threads also a lubricant can be applied to the threads for ease of removal.
I just did a search for diff ways to use pvc and found your channel.... 💁🏻♀️
I LOVE YOUR VIDEOS!!! ❤️
P.S. I wouldn’t call this an idea per-say; but a suggestion to add to your drink float hack @8:08..... I haven’t bought those tiny water bottles since my kids were toddlers and I know they can sometimes be pricey and/or hard to find in store..... I was wondering if it would be ok to cut a dollarstore pool noodle into each length of pvc for the same result??? You would know better than me. I just wanted to share that w ya ~ 😉
Keep up the good work!
I was SO GLAD to find more pvc videos one after another! You totally made my day!!! 👍
wild life self feeder I use a 6 inch y for the bottom with a 4 foot piece of 6 inch coming up with a 6 inch threaded cap on top then all you do is screw some metal screen to the bottom for drainage. fill up pipe with whatever you want to feed the animals around you and they eat out of the leg of the year. I like to paint mine camouflage to blend in. hope you like it
I always enjoy watching all your videos great ideas
Thank you
Love from India
Lots of great ideas. @6:15 with Trackers underwater KEY scope may I suggest gluing a couple of flat, round super magnets to the edge of the 'window' then you can capture keys and other stuff. On the other side of the tube a hook made of coat hanger wire. Now when the water is deeper you can save your self getting wet rescuing stuff. Oh! and use a small led touch inside the tube to light the way for dark water.
+Gary Templemain You just solved a bunch of potential issues, great thinking!
Awesome Stuff!
Thanks Man,you have given me some good ideas, keep up the good work - Stuart Eco Stu !!!
For some projects I've found hardware store PVC pipes to be weak. Furniture-grade PVC is much stronger and will last longer, especially outdoors.
2 could be used as a towel rack as well and 5 could be used for plastic bags too..👍
Cool ideas!
+Christian Adventure Films Thanks
These are always great videos, and clever ideas. Keep it up!
+Dominick Kasza Thank you
+Dominick Kasza Thank you
I like reading books in my sky chair which is in my living room, your third idea is really brilliant to keep my books off the floor. Thumbs up for me 👍
Thank you
Great good job👌👍
Good
amazing...very creative.👍
Hola te felicitó por tus aportes son muy buenas ideas con PVC sólo me gustaría q subtitularas en español... gracias
clicked like before watching...
I built the frame for my front door outta pvc then wrapped it all in plastic wrap and duct tape to keep the wind out. Its awesome! I feel like I am living in a fortress now.
Number 7 would be great kids item to use exploring under water without goggles. Thanks for your upbeat presentation and ideas, would be great to see all steps of construction on one of your most popular videos, a pvc tutorial.
Which project are you reffering to?
+Specific Love Creations The large tube used to see bottom of bathtub with keys
I used PVC to fill and drain my 55 gallon fish tank, 1" pvc pipe, a 90 degree facing up, and a 90 degree facing down, a coupler was needed to reach my tank. I took the up facing put it under my kitchen sink faucet, and placed the other end into the tank. As for draining, I used the PVC attached to a shop vac to suck the water and sand out of the tank.
+Levi Maxim Great ideas
I liked the Super Mario's mail box.
For real these vids are awesome! The chum canister from your last vid was genus!!! I have been doing a lot of these pvc hacks for sometime but you real do learn something new everyday. The chum pvc canister idea was GOLDEN!!!!!!!!
+Head High Thank you very much
Great hacks, Thanks.
+CrASH Thank you
I'm hooked on your videos. I'm on a tiny income budget and need 4 dining room chairs for my table. I want to make them using pvc pipes. Can you tell me how to do it please? Thank you.
buenas ideas y practico ya ise varios
Thanks
your cool ..
At a Fantasy Gaming Convention I went to one year. A girl had used PVC to create a Fantasy Magic like staff with a light at the top that looked like a gem. The Batteries were inside the PVC and she just painted the PVC, wrapped a bunch of tape and other stuff on it, and disguised the PVC so that it looked like a staff. When she grabbed it in a specific spot, the top lit up.
+Victor Cardinale You have a bunch of great ideas, thanks
Pleasure giving them. Just stuff I remember from way back and such. I will keep giving them. I am sure you have done or heard a lot of them, but still, who knows. :D
my tip for cutting 3 days inch and bigger diameter pvc: I wrap a belt around it, to draw a straight line around the circumference. Hopefully this helps someone.
I don't know why "days" popped up. lol
+Brandon Kirkham what tool do you use to cut it? Hand saw? Circular saw?
+Zeppelinlv2007 I start it with a hacksaw and and finish with a jigsaw.
trics are useful...
Great ideas keep them coming eventually everything will be made from PVC.
You could fill the legs of the table with sand to make them harder to tip over.
+allmagicgy Great idea on the sand
A small piece of plastic that sinks to the bottom of the pool for kids or adult to go swim down and retrieve I've made a few for my pool and there very fun
good idea
Haven't had time to look through all of your vids, maybe you have covered this but I'll throw it out here. I use an appropriate size piece of pvc with end caps (not glued) to store a mad assortment of reciprocating saw blades. Easy to transport, keep together, dry, good hacks!
holy this guy loves PVC
Me gustan todas las ideas que muestras, muchas gracias, ya me suscribí a tu canal, recibe saludos desde Aguascalientes, Mexico
another awesome pile of hacks!
+Tom Cote (Food Snot Food Reviews) this pvc looks fuckin ugly, who would want to have that in his house?
+Gammelgamer11-- paint it to match your decor knothead
awesome like
+te enseño de todo de forma casera Thanks
+Specific Love Creations you not speck spanish tu no ablas español?
you are awesome
🤣AFTER placing shoe rack, he says he can "run "up the wall🤣🤣
Can you build something that can roll up with a crank-like handle a solar pool cover or weather pool cover. It would be helpful in opening a pool, and for storing these vital pool protection items that are sometimes difficult to handle without the help of many people. Thanks
The project that you made for holding rags would also work nicely for holding plastic grocery bags from shopping. If you think throwing the bags away is a good idea, look on RUclips to see how many different things you can make from plastic bags. I crochet and use the bags as yarn. I have made bathroom mats from them as well as purses and shopping bags.
+Diana Morgan Wow, I did not realize so much could be made from plastic bags.