I just opened all the lids and taped them up so they won't fall back down. Then turned my printer upside down over my kitchen sink. So easy, no unscrewing, no mess either.
That first statement felt like you were standing behind me saying 'did you put the wrong ink in?' I was laughing so damn hard....thank you for this! I had lost all hope
I totally enjoyed this video. I love seeing women explain technical stuff. I was in the process of fixing my printer for something else and watched your video in case I need that problem solved some day. You are a great teacher, I love your style. This was really informative and you made it really interesting. Loved it.
I am setting up a Epson ET2803 with Flurescent Inks. I actually put the Red in the yellow slot. UGH! What I will do now is transfer the yellow cassette with the red. I will not be wasting the ink this way. I will not do it tonight. I waited this long over night will not hurt me. Thank you so much for your instructions! They will help me without watching anymore videos.
Great video. Mine clogged up and no longer works at all. I had just filled the cartridges and didn't want to waste all that ink. Your video showed me how simple it was to get to the cartridges to be able to dump the ink back into the bottles so I can use them in my new printer.
I’ve got an Epsom 4800 and was bumfuggled that after I emptied the tank and cartridges I couldn’t get it to print… tried everything and found that you have to do a power clean in order to replace the ink in the cartridges. Every video I watched never instructed this … good to add to your video so people will know. I was ready to send my printed back till I found this out .
I would think it's common sense to run a head cleaning afterwards. Anytime you remove all the ink out of the head you have to prime it to push the cleaning solution through the print head and to the paper
@@ladyprintboss first sure setting common since aside ☺️… my printer has 3 types of adjustments a head clean , which I did a million times, a nozzle clean which I also did several times and a Power Clean which I didn’t do at first because videos told me it used lots of ink. But that was what I needed to do was the Power Clean and that is why it took lots of ink because it refilled my cartridges. Lesson learned and all is good now thank you. 😊
So glad I found your video! I just opened an ET-2400 for my wife’s sublimation work. I confidently filled the black tank with cyan ink. 😩 Thanks to your video, I was able to just swap the tanks! Thank you!
this is what I was wondering if I could just swap them. Thank you for commenting I did the same thing but mixed the yellow and cyan so I will take apart and swap. YAH THANK YOU THANK YOU THANK YOU
@@ladyprintboss after you empty and refill the ink how did you get the printer to pull the ink back in? I tried doing the charge where you hold the ? Mark button down and it’s not doing anything.
You called me out in the first few seconds. I didn't realize there were different Epson EcoTank inks. I put the incorrect one in and it's awful! Thank you for making this video!
Thank you very much for this video, my sublimation printer died right after I filled it up with ink. So I used this information to get the Ink into the new printer
Thank you for this. I just bought a printer, ordered Hiippoo ink but it was sublimation and I almost cried when I realized after it was all in the printer already. Will try this on my day off
Hello, my issue was not the wrong type of ink. The paper kept jamming and I suspected something was inside the paper well. Thanks to your video, after removing the two screws you mentioned, I was able to lift the top off and remove the small cloth bag that somehow got inside. I then put it together and I have a working printer. Thank you so very much!!!
I bought an Epson 2803 , didn’t know. I put the ink that came in box. My mistake need to put sublimation ink . Can I just use a syringe a d squeeze the ink out instead of taking rack tank?
I have an Epson e2800 series E that I’ve successfully added sublimation ink to 2 or 3 times before. However, I’m currently unable to fill the tanks. I can’t tell what the actual levels are be because the windows look to be entirely stained. I’ve done nozzle & head cleanings & aligned the heads. It tells me I have insufficient ink to complete a power cleaning. Any advice on how to fix this? Tia
Hi, can you just put a needle and syringe in the nozzle and take it out that way instead of taking it all apart? I want to change my Epson ET-4700 back to a normal printer. Could you help me please x
Super easy and quick to start. 40 mins to disassemble and remove ink. Unfortunately the cover over the ink tanks was not cooperating and it took me nearly 45 mins to get it back 😂🤦🏼♀️ Frustrating but felt good when it finally got back on
Hi I followed this and my two small ribbon wires came out the back I don’t know where they came from do you have a video showing me how to pop them back in please?
I came across your video, cause I put the sublimation ink in my printer. I have the epson et 15000 f my eco solvent printer. Do you know anything about getting the tank out of that one? 😭 I never ran it through the lines, because I noticed what I did after topping off the second color.
My problem with the 2820 I've cleaned it all out - completely. And replaced it and now there's no ink the Inner cartridge or tubes how do I get it all back through
Hello I do not recommend it. Although I have done it myself you will have to clean the printer really good. The Eco-Solvent ink gels up with the sublimation ink and is very challenging to clean. You will need my cleaner to get it unclogged. I no longer use the products self due to the smell
My husband walked in saw me watching this video with a screwdriver in my hand and said “don’t even think about!” Me: “ to late! I’m watching this video to figure out where all the screws go cuz I forgot!” 😂
I have an ET-15000 and I accidentally put black in the cyan bay...I tried the syringe via the rubber hose and via the cartridge and the ink would not come out. I have not done this way, meaning pulling the ink bay out. What do you recommend that I do to get the ink out. Is my cartridge clogged or my line clogged? Please advise.
Did you see a model number for the ink tank? i let my ink seat inside the tank for a year and i cant get it to give me color anymore, so i want to just replace it
So I have the Epson et 2803 and my printer doesn't have the screws to remove, it lifts up due to a hinge lever. Like all I needed to do was just lift and prop up
Alright I got the tank cover back on it just takes time and slight forcing but not too much. You need to like the white pieces away from the back on the cover to fit it in the push it back into shape
I have an Epson 2400 that I got from someone and it was printing black ok, then all of a sudden my black won’t print at all and it is printing like a pinkish color… what should I do
First thing I would do is check to make sure that I do have black ink in the printer. Next I would do a nozzle. Check to see the status of the novels. If you see brakes in the nozzles, then do a hair cleaning and see where that gets you. If that doesn't clear it up, then go to one of my videos where I do the. Deep head cleaning with the solution
I need to change the ink in my surecolor f170. The epson website says removing the cartridges will mess with the calibration. Is there a way to keep that from happening
Hi! The problem is, we cannot put the tank cover back😝 I keep watching your videos, I couldn’t see a part where you have a video of putting the cover back
I have an Epson 2760 printer all online. I cannot get the ink to go from the bottle into the tank. The printer has been sitting for a while without me using it. What can I do? It’s still prints, but it is running out of ink.
Great video but need help, how do you get the hindge off on the left side thar holds the lid up? I accidently put my cyan in magenta and magenta in the cyan spot and want to switch the tanks around.
Hola, I bought a new epson ecotank ET-4810 , and filled up a bit too much on 2 colors. the printer doesn't work. I never have print anything on it since Ibought it. I did a print head cleaning, alignment , etc. And nothing! Can anyone help , please.
Go to the community tab on my RUclips channel and search for the photo where I show it. Or join the FB group and ask and I will put the image up for you there
I have an epson et 3850 and there are no screws or slots on the bottom to release and move the tank. What do I do? help. you have the most informative video
If it is leaking blue and black under the printhead your head is delaminated and that means the printhead is bad. If it's link coming from under that pad maybe you have ran multiple print heads and the pads are too full. Other than that check all your hoses
@@ladyprintboss Yes, I did run multiple print heads before. I just did a power check and will wait see what it does. Then I will follow your steps to check the pads. Thank you so much.
I just had the problem on my Epson ET-2710, it may be different from the model shown, the tank are blocked by a purple cap. I just turn the printer over the grass, open the purple cap from the ink tank and let the ink flow. I hadn't print anything before the error. I refilled the tank with the correct ink (black) and tried to print a big black square, several pages and now it works. The bad side of it, my hand are now full of ink and it's hard to get clean...
@@ladyprintboss as I said, it's on an Epson ET-2710, it's a cap to maintain the tank closed. It worked for my printer, this model but I couldn't recommend it. I took a risk but at least it worked for me.
No I haven't but I am assuming that where you connect the scanner wire, that you may have damaged that little piece it has either some gold or silver on the end of it. If it's damaged you can cut it slightly
Your video is so useful, but even crazier is that you look so much like me, lol! I had to do a double take and think back like, did I make this video? I actually discovered a long-lost sister years ago so, hmmmm......
I put the wrong color ink in my printer as well and purchased syringes but I am unable to get pierce through that hard plastic. I tried the first time and the needle broke.
I have an Ecotank that has broken lines on the nozzle check printout, even after power cleaning. I would like to see how you clear the small lines/tubes. Thanks!
The tube pops off of each end just remove it and flush it, but the tube is unlikely to be your problem. I would clean the print head using the paper towel method then cleaning solution. Putting a syringe over the the print head nozzles and flushing that ink through shouls clear the clog in your print head
I took the wires out the tops to put it down and forgot where they exactly go!! Can u make video on where u out the 3 wires back for the top of printer
there is a post in the community page allready that shows where to put it and there are a couple of other videos here on the channel but you will need to just search through the printer playlist and find that printer. Sorry I can t tell you exactly whith video
I was able to successfully get the ink cartridge out, clean it, and replace it, but now the printer is saying that I have a scanner error every time I turn it on and demands that I turn it off. ERROR #100077 Why is it saying this?
Disregard. I found another video that showed me how to fix it. When opening the lid, I pulled it back too far and it disconnected a cable for the scanner. Hopefully people see this comment before they get to that part in the video! Lol!
I have a 15000 and I’m having trouble getting the front panel off for access. It’s slightly different than this model. Has anyone attempted with a 15000?
How about you go make a yourube video and then come back and shoe us how it's done? Maybe try to get some better energy because the lady who could help you won't because you came sideways. I make these videos for people who appreciate them and I help those who appreciate my time. Have a better night and consider yourself blocked.
@@ladyprintboss you mean RUclips? And it’s show us. Not shoe. Learn how to spell and use at least 3rd grade grammar before you come at me. I asked a question. But I’m obviously not only one who didn’t find your video helpful. Now instead of crying just move on with your life like I have. Oh btw I fixed it. Again video was helpless.
I just wanna say you rock I just got done getting ink all over myself because well I'm messy lol thank you so much I never thought in a million years when I come looking for a fix for my eco tank printer a women was going to show me how. Thank you so much.
I think I’ll buy a new one! She has the patience of a saint! Thank You beautiful woman. You are mechanically inclined. I don’t have that much patience.
I just opened all the lids and taped them up so they won't fall back down. Then turned my printer upside down over my kitchen sink. So easy, no unscrewing, no mess either.
brilliant
How did you end up flushing the hoses, cause I really don’t wanna take it apart haha
That first statement felt like you were standing behind me saying 'did you put the wrong ink in?' I was laughing so damn hard....thank you for this! I had lost all hope
I totally enjoyed this video. I love seeing women explain technical stuff. I was in the process of fixing my printer for something else and watched your video in case I need that problem solved some day. You are a great teacher, I love your style. This was really informative and you made it really interesting. Loved it.
Thank you! I got a BRAND NEW printer and right away put the wrong color ink in the wrong tank 😭 but your amazing video saved me!!
I just did the same thing to mine. But I had made mine a sublimation printer.
I am setting up a Epson ET2803 with Flurescent Inks. I actually put the Red in the yellow slot. UGH! What I will do now is transfer the yellow cassette with the red. I will not be wasting the ink this way. I will not do it tonight. I waited this long over night will not hurt me. Thank you so much for your instructions! They will help me without watching anymore videos.
That's a great idea just switch the carts out. You got this!!!
How do I put the cover back on for my ink cartridges? I’m having a hard time putting it back on
Shop Products - Sublimation Inks- latonna.com/product/240ml-sublimation-ink-set/
Printhead Cleaner - latonna.com/product/printhead-cleaner-for-sublimation-inks/
Eco Solvent Inks - latonna.com/product/waterbase-eco-solvent-ink-for-all-epson-desktop-printers-eco-solvent-ink-for-printable-htv/
shop my store for more products www.ladyprintboss.com
Can replacement tanks and lines be purchased?
Great video. Mine clogged up and no longer works at all. I had just filled the cartridges and didn't want to waste all that ink. Your video showed me how simple it was to get to the cartridges to be able to dump the ink back into the bottles so I can use them in my new printer.
I’ve got an Epsom 4800 and was bumfuggled that after I emptied the tank and cartridges I couldn’t get it to print… tried everything and found that you have to do a power clean in order to replace the ink in the cartridges. Every video I watched never instructed this … good to add to your video so people will know. I was ready to send my printed back till I found this out .
I would think it's common sense to run a head cleaning afterwards. Anytime you remove all the ink out of the head you have to prime it to push the cleaning solution through the print head and to the paper
@@ladyprintboss first sure setting common since aside ☺️… my printer has 3 types of adjustments a head clean , which I did a million times, a nozzle clean which I also did several times and a Power Clean which I didn’t do at first because videos told me it used lots of ink. But that was what I needed to do was the Power Clean and that is why it took lots of ink because it refilled my cartridges. Lesson learned and all is good now thank you. 😊
So glad I found your video! I just opened an ET-2400 for my wife’s sublimation work. I confidently filled the black tank with cyan ink. 😩
Thanks to your video, I was able to just swap the tanks!
Thank you!
Omg this happened to me too 😭
Me too! I put cyan in the yellow tank 🤦🏾♀️
this is what I was wondering if I could just swap them. Thank you for commenting I did the same thing but mixed the yellow and cyan so I will take apart and swap. YAH THANK YOU THANK YOU THANK YOU
Also, thank you SO much! I almost threw this printer out and bought a new one! You saved me over $200!
Glad I was able to help
@@ladyprintboss after you empty and refill the ink how did you get the printer to pull the ink back in? I tried doing the charge where you hold the ? Mark button down and it’s not doing anything.
You called me out in the first few seconds. I didn't realize there were different Epson EcoTank inks. I put the incorrect one in and it's awful! Thank you for making this video!
Hi, I just have one question. Where do you buy the replacement cartridges? Can you get them from Amazon?
That's a good question, I don't know
Thank you very much for this video, my sublimation printer died right after I filled it up with ink. So I used this information to get the Ink into the new printer
Thank you for this. I just bought a printer, ordered Hiippoo ink but it was sublimation and I almost cried when I realized after it was all in the printer already. Will try this on my day off
dont do it, my printer is not turning on because of everything I did in this video.
Hello, my issue was not the wrong type of ink. The paper kept jamming and I suspected something was inside the paper well. Thanks to your video, after removing the two screws you mentioned, I was able to lift the top off and remove the small cloth bag that somehow got inside. I then put it together and I have a working printer. Thank you so very much!!!
Can you use it for sublimination after emptying it out?
Yes you can
I bought an Epson 2803 , didn’t know. I put the ink that came in box. My mistake need to put sublimation ink . Can I just use a syringe a d squeeze the ink out instead of taking rack tank?
This lady deserves a medal
How did you get the left side of the lid off mine is getting hooked on the clip
🤦♀️I just did this with my brand new epson while setting it up. Thank you so much!
I have an Epson e2800 series E that I’ve successfully added sublimation ink to 2 or 3 times before. However, I’m currently unable to fill the tanks. I can’t tell what the actual levels are be because the windows look to be entirely stained. I’ve done nozzle & head cleanings & aligned the heads. It tells me I have insufficient ink to complete a power cleaning. Any advice on how to fix this? Tia
Thank you 🙏 so much for doing this video. Or live. I want to make my own T shirts 👚, can I get the subliminaation in a cartridge not a refill bottle
Yes you can just buy a printer with cartridges but it will cost more
How did you get back together. I’m having a hard time
Hi, can you just put a needle and syringe in the nozzle and take it out that way instead of taking it all apart? I want to change my Epson ET-4700 back to a normal printer. Could you help me please x
I can't find the 2nd video and I can't get the one strap back on 😢
Super easy and quick to start. 40 mins to disassemble and remove ink.
Unfortunately the cover over the ink tanks was not cooperating and it took me nearly 45 mins to get it back 😂🤦🏼♀️
Frustrating but felt good when it finally got back on
Congrats on getting it back on.
How did you get it back on 😭😅
@@ladyprintbosshow did you it back on
Hi I followed this and my two small ribbon wires came out the back I don’t know where they came from do you have a video showing me how to pop them back in please?
@@Claire-277 yes so look on my community page it's a photo of where that goes you'll have to stroll back a about years
I do have a question for you ? Can u use the ink the one printer came with and dose it do sublimation ?
not unless you purchase a true sublimation printer. Epson does sell the epson 570 and a few others that are true sublimation printers
I’m having trouble printing, I haven’t used my printer for over a year. Does sublimation ink dry up?
I’ve heard a lot of people say to run your printer at least once a week and not to let it sit .
I have epson 2803 I use for sublimation ink I have a problem with the black ink coming from the bottom of the ink cartridge what should i do
I came across your video, cause I put the sublimation ink in my printer. I have the epson et 15000 f
my eco solvent printer. Do you know anything about getting the tank out of that one? 😭
I never ran it through the lines, because I noticed what I did after topping off the second color.
Hello, is the process the same for the ecotank 2850?
My problem with the 2820 I've cleaned it all out - completely. And replaced it and now there's no ink the Inner cartridge or tubes how do I get it all back through
I have a converted epson sublimation printer can I take the ink out and put in the water based eco Solvent ink. Will I do it the same way?
Hello I do not recommend it. Although I have done it myself you will have to clean the printer really good. The Eco-Solvent ink gels up with the sublimation ink and is very challenging to clean. You will need my cleaner to get it unclogged. I no longer use the products self due to the smell
ty i just got mine and confidentially filled it when the wrong ink, but i thankfully noticed before i put more than the black ink in it
I’m having a problem getting it back on and my pages print blank since I changed the ink
I bought some bad sublimation ink 😒 so it’s completely full and I’m so irritated! Thank you for this video!
My husband walked in saw me watching this video with a screwdriver in my hand and said “don’t even think about!”
Me: “ to late! I’m watching this video to figure out where all the screws go cuz I forgot!” 😂
I have an ET-15000 and I accidentally put black in the cyan bay...I tried the syringe via the rubber hose and via the cartridge and the ink would not come out. I have not done this way, meaning pulling the ink bay out. What do you recommend that I do to get the ink out. Is my cartridge clogged or my line clogged? Please advise.
Make sure the cover where you put the ink IN is open, so the syringe can pull, otherwise there is a vacuum - no ink comes out.
Did you run hot or cold water through it?
ROOM TEMP WATER
Did you see a model number for the ink tank? i let my ink seat inside the tank for a year and i cant get it to give me color anymore, so i want to just replace it
So I have the Epson et 2803 and my printer doesn't have the screws to remove, it lifts up due to a hinge lever. Like all I needed to do was just lift and prop up
Are you working on an ER-4760?
Alright I got the tank cover back on it just takes time and slight forcing but not too much. You need to like the white pieces away from the back on the cover to fit it in the push it back into shape
I don’t know if that makes sense tho
I have an Epson 2400 that I got from someone and it was printing black ok, then all of a sudden my black won’t print at all and it is printing like a pinkish color… what should I do
First thing I would do is check to make sure that I do have black ink in the printer. Next I would do a nozzle. Check to see the status of the novels. If you see brakes in the nozzles, then do a hair cleaning and see where that gets you. If that doesn't clear it up, then go to one of my videos where I do the. Deep head cleaning with the solution
where's the other video link?
I need to change the ink in my surecolor f170. The epson website says removing the cartridges will mess with the calibration. Is there a way to keep that from happening
Hello I am not sure I have not worked on that printer
Hi! The problem is, we cannot put the tank cover back😝 I keep watching your videos, I couldn’t see a part where you have a video of putting the cover back
This my same problem 😩
lol did you figure It out because Same
Can this be done with the ET15000? 🤞🤞
I have an Epson 2760 printer all online. I cannot get the ink to go from the bottle into the tank. The printer has been sitting for a while without me using it. What can I do? It’s still prints, but it is running out of ink.
The ink comes out of the bottle, but will not go into the tank
Thank you
Osp u failed to mentioned to screws before u lift up after the heads moved
Love it ❤
That's the problem I'm having got the 2 screws off but 😩
Great video but need help, how do you get the hindge off on the left side thar holds the lid up? I accidently put my cyan in magenta and magenta in the cyan spot and want to switch the tanks around.
Can you add a different sublimation brand ink after the in an out? I mean without opening the whole printer
yes
Thank you. So I would have to print until all the ink is out of the cartridge, correct?
Hola, I bought a new epson ecotank ET-4810 , and filled up a bit too much on 2 colors. the printer doesn't work. I never have print anything on it since Ibought it. I did a print head cleaning, alignment , etc. And nothing! Can anyone help , please.
Did you ever fix the flaps that are in the back that came apart bc I can’t figure out how to fix it…thank you for this video❤
Go to the community tab on my RUclips channel and search for the photo where I show it. Or join the FB group and ask and I will put the image up for you there
So do you use distill water and is the printer still working after taking the ink out
Yes that is correct
Distilled water works fine you can put a very small about of simple green if needed
I have an epson et 3850 and there are no screws or slots on the bottom to release and move the tank. What do I do? help. you have the most informative video
How to get an answer to the problem
Hi I am not sure about that one but I will look it up and get back to you
What about if your epson2600 has dry eco solvent ink...how can it be flushed or cleaned?
You will need to purchase the Eco-Solvent ink cleaner. You can purchase it from the channel shop page
Can I put dtf ink my Epson 2840 ?
Hi from Ireland, loved your video ,thanks for information ❤️
I just set this up out the Box and no ink is flowing through.. nothing prints when I do the nozz check … any tips ? Or is mine Defective 😢?
Did you prime your cartridges
How do you prime the cartridge
Is this the same steps to fix why my printer 2720 is leaking blue and black ink under the ink reservoir? That is my case. Thank you
If it is leaking blue and black under the printhead your head is delaminated and that means the printhead is bad. If it's link coming from under that pad maybe you have ran multiple print heads and the pads are too full. Other than that check all your hoses
@@ladyprintboss Yes, I did run multiple print heads before. I just did a power check and will wait see what it does. Then I will follow your steps to check the pads. Thank you so much.
Wait about 12 hours and then check it
Same thing blue ink but I don't have a ink pad I have an external bottle but it seems to coming out of the bottom of where you put the blue ink
I just had the problem on my Epson ET-2710, it may be different from the model shown, the tank are blocked by a purple cap. I just turn the printer over the grass, open the purple cap from the ink tank and let the ink flow. I hadn't print anything before the error. I refilled the tank with the correct ink (black) and tried to print a big black square, several pages and now it works. The bad side of it, my hand are now full of ink and it's hard to get clean...
Hey I'm really not sure I've never seen the purple thing maybe they've changed it on a different model. let me know if you get it worked out
@@ladyprintboss as I said, it's on an Epson ET-2710, it's a cap to maintain the tank closed. It worked for my printer, this model but I couldn't recommend it. I took a risk but at least it worked for me.
Thanks for letting me know because someone else may ask about that model so I really appreciate your help
🤣Yes ma’am I did…. You are a lifesaver. Thank you for sharing!
How do you put the ink cover back on?
\\
What is the name of the ink tank in the Ecotank?
have you ever had scanner error 100016 ?? i’ve cleaned the wires and it’s still stuck in scanner error
No I haven't but I am assuming that where you connect the scanner wire, that you may have damaged that little piece it has either some gold or silver on the end of it. If it's damaged you can cut it slightly
How do I put the plastic ink cover back on??
How can i put the leads back on
How do I put it back together?
Is it ok to have bit of water go through ?
Obviously once we rinsed the ink out there is bit water left in
you seemed to have answered your own question. LOL🤣
@@ladyprintboss do you do the print checks etc ?
Your video is so useful, but even crazier is that you look so much like me, lol! I had to do a double take and think back like, did I make this video? I actually discovered a long-lost sister years ago so, hmmmm......
😂😂😂😂
I put the wrong color ink in my printer as well and purchased syringes but I am unable to get pierce through that hard plastic. I tried the first time and the needle broke.
There are 3 holes on the top of the spout that goes into that bottle , use a smaller needle or look at my video on how to remove the tank it's easier
How do you put the cover back on
I never tried to put mine back on
I have an Ecotank that has broken lines on the nozzle check printout, even after power cleaning. I would like to see how you clear the small lines/tubes. Thanks!
The tube pops off of each end just remove it and flush it, but the tube is unlikely to be your problem. I would clean the print head using the paper towel method then cleaning solution. Putting a syringe over the the print head nozzles and flushing that ink through shouls clear the clog in your print head
@@ladyprintboss thanks! How do I make the cleaning solution?
@@nicolereeves4719 50% Isopropyl Alcohol and 50% windex
Now I can’t get the cover back on. Can someone please help?
Love, love, love ya!!! I just did this today (error that is) going to attempt this. Gotta be quicker than printing mistake ink (only)
I took the wires out the tops to put it down and forgot where they exactly go!! Can u make video on where u out the 3 wires back for the top of printer
there is a post in the community page allready that shows where to put it and there are a couple of other videos here on the channel but you will need to just search through the printer playlist and find that printer. Sorry I can t tell you exactly whith video
Did you figure out how to put the wires back? I can’t figure it out either
The same problem I’m having…if you find out can you do a video
Great Video, thanks for all you hard work!
I was able to successfully get the ink cartridge out, clean it, and replace it, but now the printer is saying that I have a scanner error every time I turn it on and demands that I turn it off. ERROR #100077 Why is it saying this?
Disregard. I found another video that showed me how to fix it. When opening the lid, I pulled it back too far and it disconnected a cable for the scanner. Hopefully people see this comment before they get to that part in the video! Lol!
I have a 15000 and I’m having trouble getting the front panel off for access. It’s slightly different than this model. Has anyone attempted with a 15000?
hi I am not sure about that one since I dont have it but I am sure someone in the facebook group can help
So where you take them 3 wires from.? Why didn’t you actually show it?
How about you go make a yourube video and then come back and shoe us how it's done? Maybe try to get some better energy because the lady who could help you won't because you came sideways. I make these videos for people who appreciate them and I help those who appreciate my time. Have a better night and consider yourself blocked.
@@ladyprintboss you mean RUclips? And it’s show us. Not shoe. Learn how to spell and use at least 3rd grade grammar before you come at me. I asked a question. But I’m obviously not only one who didn’t find your video helpful. Now instead of crying just move on with your life like I have. Oh btw I fixed it. Again video was helpless.
I loved your video, it helped me so much!!
Great Video! Thanks alot.
Excellent video thanks !
Can you buy new ink cartridges instead of taking the printer a part
if you have a printer that takes cartridges you definitely can however the et printers have tanks
Thank u for this because I was so worried 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾💙
Thanks for the info. Very helpful!
You bet!
❤ thanks for the video !!!
Help I can’t get it back together
You did a wonderful job. However, I know me! I'm going to find someone to do this for me
Thank you so much you help me a panic time
is this a 2760
This is the 2720
Thank you so much.
Muchas gracias!!!!!!
Thank you so much!!
It would have been nice if you would have let people know at the beginning before taking the cartridge cover off that you can't put it back on.
I just wanna say you rock I just got done getting ink all over myself because well I'm messy lol thank you so much I never thought in a million years when I come looking for a fix for my eco tank printer a women was going to show me how. Thank you so much.
Did u get it back on
I think I’ll buy a new one! She has the patience of a saint! Thank You beautiful woman. You are mechanically inclined. I don’t have that much patience.
love it
I cnt get my top cover off