Honda CB350 | Paint Protection Film | Complete details | Pros & Cons | Better than Ceramic coating?
HTML-код
- Опубликовано: 2 окт 2024
- In this video, i have shared my complete experience of PPF lamination which i got done on my honda highness cb350.
Watch full video for complete details.
#hondahighnesscb350 #bikecare #ppf #lamination
My motovlogging gears:
Go pro hero 8 black link: amzn.to/3b79p5c
Go pro hero 8 black media mod link: amzn.to/3pFiCpc
Go pro 3 way mpunt tripod: amzn.to/2L9aY82
Boya helmet main mic: amzn.to/2KPPkpm
Bluarmor Heltmet Go pro mount: amzn.to/3hDmWCy
Dead cat for mic: amzn.to/2MrWZKJ
Chin pads for helmet: amzn.to/2L78Ld6
--------------------------------------------------------------------------------------------------------------------------------------------------
Other gears for Honda CB350:
BOBO mobile holder link:amzn.to/3nogz8i
Gods saddle bag link: amzn.to/2LNXzC9
Waist Bag for men link: amzn.to/3n53dNn
My winter pants: amzn.to/388OiNY
I pop small rear view mirrors: amzn.to/38VVM5X
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More videos:
Leopard trail Gurgaon:
• Honda CB350 Highness |...
Gurgaon Agra trip:
• Honda CB350 | Weekend ...
• Video
Honda Cb350 unbiased accessories review:
• Honda CB350 Highness |...
Gods saddle bag for Honda CB350:
• Honda CB350 Highness |...
Honda CB350 real world mileage:
• Honda CB350 HIGHNESS |...
Have a beautiful day ahead......
Bahut badiya deep bhai... Bahut sahi explain kiya.. 👍🙂
Bro, according to me, PPF is absolutely unnecessary on any vehicle. Reason? Body panels are supposed to take any natural wear and tear. The paint is sturdy enough to tackle minute scratches. PPF is just a plastic film that will lose its sheen in no time. Plus you won't be able to enjoy that deep gloss and the feel of metal on your hands 😜 My bike's (R15 V1) tank was pretty scratched and damaged in 10 years. I simply went to a good paint shop and got the tank and some other panels painted for just ₹1500 and the bike's is as good as new now. It shines brilliantly and no one can believe that it has been repainted. So, if after a few years, you feel that your paint has started to fade, just get the vehicle touched-up or painted.
After all, these beautiful machines are meant to be enjoyed as they were built ❤️
Btw, I'm also going to replace my bike very soon. Highness it is! ❤️ Test rode the bike twice and fell in love with it! Thanks for sharing your experiences with us! It has helped me make an informed decision ❤️
Thank you bro for appreciation & good decision to buy Highness as it is a superb bike👍
Please update later if there will be an issue while washing bike.
coating will come off or not.
Thanks 🙏
It's not looking like original PPF film. 3M precut PPF film for full bike price is Rs. 5500 from 3M car care. The work done might damage ur bike paint, be careful. Ur videos are good and no flak. I have done ultrashield X PPF hydrophobic coating on my CB 350, it increased the gloss of bike.
Got the delivery if my bike today ❤️
From gurugram only.
Wish to see you soon here and there maybe in gurgaon 👍👍
Congrats bro
pura feel chala gya shine ka
Ceramic karna chahiye tha
It's really cheap price bro, if you done same work in Kerala you need to pay more than 5000rs
U ll get it done for ₹1k also..(Taliparamba, Kannur)
Quality ll b dfrnt..
What he has done is lamination, ppf is completely different from lamination
@@karunkeechira shop evideya bro tpba l name ?
@@shakkeeb_muhammed manna, tagore school side
If you are going to explain the video in hindi,then you have to mention in caption that the video will be in hindi
Deep bhai.. Just watched..aap 3rd gear mein 40 ke speed pe hai. mera highness seems like engine knocking at such low speeds. It is new only run around 100 kms. will it clear with first servicing. please batiyega. Thanks
900/_ 1000/_ lol in bangalore 3k_4k.....looting
sir jis dukan selagaye he na bht bht ganda tarike se lagaya he tank gaurd laga hua he ussi pe laga diya he bubble reh hgya he bht galat tarika se lagaya he
does not feel like PPF just a regular lamination
Nice farhan bro
Plz share your latest status of ppf. Is it worth
Going to do ppf on my highness next Monday. The detailing station quoted 7k for self healing ppf on the tank and as well on the side panel and asked me extra for the ceramic coating on the chrome part but somehow I negotiate with them and theyre saying that they will do ppf plus ceramic coating at 7000 rupees. Should I go for it
900 likes completed by me❤
This is not 3M original Paint Protection Film. Not even side panels can be covered in such low cost. Surface Correction & Enhancement process not done before applying ppf bcoz if that your bike's Glossiness is not visible.
Thr is one request, pl make one video while removing this film. And share honest review and after effects
Hello deep..i want to know abt bs6 vechicle... there is a fuel pump which needed specific volume of petrol...when we dry out the fuel..does it effect on fuel pump and fuel injector...pls reply..good honest reviews keep it up...
The minimum capacity we should maintain in a fuel injected bike is 4-5 ltr if ur tank fits 17litres.
If ur tank fits 15 litres then u should maintain 3-4 litres.
Shall not maintain less than that as it will affect fuel injector.
honestly not looking good...
Who is this video in 2024
Watching in 2023-2024
Sir I have Highness 2023, purchased on first July.. I have installed fog light with 6 pin relay. I opened headlight dome and found 3 wires without any connections, one of which was red means +ve. I took supply for switch to operate relay and fog lights' upper/dipper were working fine with 3 way switch. But inadvertently that +ve taken for switch, touched the body and now not showing current now. Bike is operating fine though. Kindly reply what happened? Is there any fuse which has been blown off and needs replacement? If yes, where is it's location?
Fog lights are still working if switch wire is joined directly to the battery.
Informative video on ppf 👌🏻👍🏻. In Bangalore they are quoting 4K for tank and side panels. You had good deal. How to confirm about 3m film? Did u confirm?
Yeah, it's always costlier in Bangalore. In and around Delhi it's quite cheap.
I paid 2k in jc road bangalore for tank, side panel and console
PPF film with ceramic coating is in the market. I have done it for my CB 350 bike. It slightly increases the gloss of vehicle. 3M itself is providing precut PPF for full vehicle at Rs. 5500 with 5 years warranty. But if u do it with road side shops there is no guarantee of it’s quality and also damage bike paint. Ur videos r good and no flak and information u provide is true. But please do proper research before doing some additions
@@chinnikrishnar5549 shop name telme
@@manjunathak.n6521 it's not worth bro, it is getting off the tank. Better you should try 3M coating film
Fill petrol of 10 ruppes prank
Ppf or lamination konsa better hai.?
Frankly speaking itz not looking nice at all.. dosent go wd d class of highness.. it shows local work in clear.. dont feel bad but remove it else in heavy sun rays it wl effect the original paint.. itz a plastic and it wl melt and ruin your paint brother.. dont feel bad.. but itz a wrong choice i say
actually I'm also not fond of these things but i did because so many people were asking about it & they require it to prevent scratches.
@@deepranjansachan u wud hv opted Ceramic or Graphene Coating wch is trending and efficient too.. giving long term result along wd goos quality of shine.. nywyz al the very best for ur Vlogging.. stay blessed bro
its low quality stuff and there is no point in saying it doesn't shine more than the original paint. If anyone plans to PPF you should go for a professional wrapping station and do it, else it won't be as good as you expect.
how much it cost bro for ppf coating only in tank
Around 500rs but this not original ppf
❣️ Honda Highness CB350 ❣️
Ppf is different ..this film gna spoil ur bike paint like anything ...proper 3m ppf required 2 days and atleast 8k for hness ...and never aplied in single peice..
Bro what u are talking about is self healing film by 3m care which costs around 8k. This film is normal film which is more common as not many bikers will spend 8k for their bikes. Personally i don't like any film as both hamper the looks of bike.
@@deepranjansachan not all entry level films r self healing ..avg quatations for ppf was like arnd 7k for normal ..8 for garware and arnd 9 for 3m self healing ...
Film which u gt on ur bike is super cheap one and not exactly made for paint protection of a vehicle ..more like a jugaad ..in short I just want anyone to spoil his her paint with such stuff ..👍..
Hy did pm u on fb few days back .. kindly check ..
Bhaiya mera honda mad black ...mey lamination Karshakte ?
Matte*
Bhai bike ki road presence kaisi hai?
Kaafi shi h bhai. Bhot saare log poochte hain rok ke
Siliguri ( Darjiling) mey tank k liye 2200 lagte hai...r said panel pe 800 mangta hei
That's how it is in the North East!
Kharab kardia poora....bhaisaab cheap quality ppf hai and jisne kaam kia hai wo bhi thik nai....aap try karo kisi ache detailing workshop ..
Rusting ka problem aa rahi hai kya...
Not till now👍
564th like mera.
Bhai yeh bike mein bike ke document rakhne ka koi jugaar nahi hai ?
That's not an original 3m PPF.
Ppf ar lamination me toh fark hoga na??????
Meri 3 sal ho gyi Gurgaon railway road me kraya tha abhi bhi chal rhi hai 3mm thick film on my apche 160
Does it avoid rusting issue??
Generally rusting doesn't occur on tank and side panels
Side panels plastic Ka he kya ??
Please reply
No bhai metal ke hain
@@deepranjansachan thank u brother 👍👍
Good decision 👍
Bekar
I want to ask, after PPF will there be any issues regarding service of the bike. Because at service centre they will wash the bike and apply polish for glow!! So, will that harm the PPF or any other coating??
I asked them for polish and theya said that u can do wash and polish.
@@deepranjansachan bhai kaha karwaya ? location please
@@priteshpagare9858 in Gurgaon near raj cinema bro, shop name is given in vlog
Kya bhaiji aap bhi lamination kara li
Nahi karana tha lamination
Bhai tank bag bhot scratch maarta h ti karwana hi padta h. Baaki abhi change kara lenge
Where in आमची मुंबई
Its in Gurgaon 👍
sincere observations and comments. many thanks
Very Nice Brother 👍👍
Thank you Sanju bhai🙏
What if we remove ppf from the bike? Does it look the same and shine ? Should we need to polish it after removing the ppf to shine it ?
Thanks Deep ji
3m ki kaha se milaga lamination
Ye 3M ka original PPF nahi hai
PPF and lamination is advised only for glossy paints and not for matte. :-)
Not necessarily, there is a different ppf for matte.
Bro Matte ppf is available i fixed in my Cb 350
@@hsejesil oh okay. The accessories guy was being too honest and good and non money minded in my case I guess. He said, no need to do PPF or lamination for matte paint unlike glossy paint!
@@phantombrain I hVe done pps from mojo jojo cochin... To protect paint from any scratches... Matte finish its a Liquid wrap technology same like PPF but no Cutting, No bubbles and no Edges, i also done ceramic for chrome and ppf for avoid scrTches in the headlight and Cluster... You can check facebook.com/watch/?v=207967507664747
@@hsejesil can you share the cost and time taken for this process, please? Thanks.
Any point in waxing on a ppf coated bike?
No benefit bro.
@@deepranjansachan Ppf can be removed without causing any damage to original paint?
Yes, it can be removed. But don't use it more than a year
You should have gone for professional. They didn't do it properly. Professional people will do better than rhus with 5 year warranty
Very good information 👏👏👏
Thank you bro🙏
Which one is gud ceramic coating or film
PPF
I think ceramic coating is more costly, somewhere about 9-10k. But it is top notch looks wise.
@@bidyutchoudhury actually PPF is costlier than ceramic coating. I don't know how he got it for less than ₹1000
Shop place??
Ketna lage bhai
Total 900 bhai
Ppf in 1 hr... I don't think so..
Try something different
👍
So, DRS, it's been eight months since this video. So please do tell us how has the lamination survived? Good results? Secondly, would you recommend getting lamination done for a matte finish bike?
Wait till next week bro, i will make a video on lamination👍
Useless
I have done lamination on my highness in 450 rs and 2 year warranty 😳
Where bro?
@@girishsgowda7474
Dear it's in haryana jind city
How much??
i dont think lamination is good...its just work like mobile polyurethane screen guard scratch will come easily
Sir ji app ka contact number milga keya.
Sir aap mere ko insta pe msg karo
How much cost