I like the build, but had to do some of my own research on what relay I would need to use for low temperature cut-off. Maybe you could build out and show how it is done with this monitor for a budget LifePo4 battery that doesn't have low temp cut-off. Thanks for the review.
When you build out your testing board, I would like to see the monitor screen with both Charge and Discharge hooked up at the same time. Thanks for the video.
So I have a question you seem to understand this pretty well all the videos I have seen are using inverters I have a lithium battery in back of my suv to help Power my system subwoofers and amp. So the correct way to hook this up would be to put the shunt in between the lithium battery and my amplifier? Is that correct
I have been considering this shunt, thanks for making such a detailed video on it! In wish you showed the chart at the end of the video showing then discharging and charging over time. 1 question that I do have is, does this shunt data log? Ie if you walked away for a day then hooked your phone back up to it via Bluetooth, can you see what your system did the previous 24hrs?
I'm wondering if I hook the monitor into a kill switch, will it forget the battery stats and reset everything? I would use this on a boat and I wouldn't want to have the battery monitoring module empty the main battery it if I wasn't going boating for a while. I would really like to have it remember the main battery stats and the state of charge. Am I forced to buy a smaller external battery for the monitor that won't affect the main battery?
Say your inverter was a car audio amplifier. Would i hook this up the same way? Between the amp and secondary battery or between the secondary battery and the battery vehicle ground? In other words, which side of the battery or does it matter?
I just installed this battery monitor and was very happy with it at the start. I set the battery bank capacity to 300ah and when fully charged to 100%. Everything was good, but after a day I noticed that all readings were still the same. I turned off the charger, put on a few more LED lights and the monitor showed all these changes, but the app on my phone is stuck on the original settings. Even still showing it's charging when the charger is turned off. Can't change any settings on the app, can't turn it off and can't disconnect, nothing, any ideas if you read this post, thanks in advance.
lj@@GearGadgetReviews thank you for the quick reply WovVon 400amp mine will arrive today and my battery just got here 1/2 hr ago the TIMEUSB 12v 200ah 200BMS plus battery.... KILLER DEAL 474.00 PLUS TAX direct from Timeusb
Pretty slick that it can monitor output and input. Definitely a neat little gadget
👍🏻👍🏻
I like the build, but had to do some of my own research on what relay I would need to use for low temperature cut-off. Maybe you could build out and show how it is done with this monitor for a budget LifePo4 battery that doesn't have low temp cut-off. Thanks for the review.
I’m going to try and get around to doing that….eventually
When you build out your testing board, I would like to see the monitor screen with both Charge and Discharge hooked up at the same time. Thanks for the video.
Good idea👍🏻
Nice explanation, thank you. 👍
👍🏻👍🏻
So I have a question you seem to understand this pretty well all the videos I have seen are using inverters I have a lithium battery in back of my suv to help Power my system subwoofers and amp. So the correct way to hook this up would be to put the shunt in between the lithium battery and my amplifier? Is that correct
That would be my guess, but I’ve never dealt with a car amp before with this type of setup.
good video!
Thank you👍🏻
I have been considering this shunt, thanks for making such a detailed video on it! In wish you showed the chart at the end of the video showing then discharging and charging over time. 1 question that I do have is, does this shunt data log? Ie if you walked away for a day then hooked your phone back up to it via Bluetooth, can you see what your system did the previous 24hrs?
Thanks👍🏻 yes, there is a log
@@GearGadgetReviews that's great news, thank you for confirming that for me 👍
👍👍👍
👍🏻
As my system is not in use everyday, if you turn the shunt off to save any long term power drain on the battery, will it retain its settings?
No, it will lose its last setting if you remove it from power. At least on this specific shunt.
Nice video… 👍 I have a question? Can I connect this battery monitor to a redarc bcdc1225? Thanks 🙏
I'm wondering if I hook the monitor into a kill switch, will it forget the battery stats and reset everything? I would use this on a boat and I wouldn't want to have the battery monitoring module empty the main battery it if I wasn't going boating for a while. I would really like to have it remember the main battery stats and the state of charge. Am I forced to buy a smaller external battery for the monitor that won't affect the main battery?
Say your inverter was a car audio amplifier. Would i hook this up the same way? Between the amp and secondary battery or between the secondary battery and the battery vehicle ground? In other words, which side of the battery or does it matter?
If hook after an alternator on an car will I be able to see battery 🔋 battery 🪫 percentage/ah left
👍🏻👍🏻
This device
Can it be connected to batteries in parallel? Could you add the two batteries?
Yes, you could
I just installed this battery monitor and was very happy with it at the start. I set the battery bank capacity to 300ah and when fully charged to 100%. Everything was good, but after a day I noticed that all readings were still the same. I turned off the charger, put on a few more LED lights and the monitor showed all these changes, but the app on my phone is stuck on the original settings. Even still showing it's charging when the charger is turned off.
Can't change any settings on the app, can't turn it off and can't disconnect, nothing, any ideas if you read this post, thanks in advance.
Does the app work on both iphone and Android phones? i have android
Yes, there is an android app as well👍🏻
lj@@GearGadgetReviews thank you for the quick reply
WovVon 400amp mine will arrive today and my battery just got here 1/2 hr ago the TIMEUSB 12v 200ah 200BMS plus battery.... KILLER DEAL 474.00 PLUS TAX direct from Timeusb
I downloaded the app, and unzipped the file, but I can't find the app file or open it. Can you point me in the right direction?
Are you on Android? I downloaded the IOS app directly from apple
I figured it out. Thanks.@@GearGadgetReviews