@Massimiliano Rota Removing the IHS and apply new paste its makes maybe about 2-3C* Cooler, but its Danger to open the CELL CPU, so if your fan is not turning crazy, u can let it Close. more important are the Holes on the Case for better air flow... with the holes on the case your PS3 will be about 10C* Cooler as befor! and than it also conforms wich Modell u have, some runs hotter and some Cooler, some needs also more Energy, and some are Energy saver. But the Holes is the best thing you can do to all the PS3 out there! Than just do the Fan a bit faster, and you will have Temps about 50-64C* at LOAD = in game... without all this mods, your Console gets standart over 95C* and a YLOD begins at 85C*, so we can say, all standart PS3 Consoles runs Hot, and thats why Sony should update them Firmwares, and set the Fan a bit faster :\ realy a shame for Sony, thei just want be Silence, and the rest is not important we can say pfff PEACE ;)
You're right, but the main problem of every PS3 models always will be BGA. WHO THE FUCK INVENTED THAT? Why not a regular socket just like in old processors? The fat models were wrongly designed, processors were too big, so much comsumption, bad refrigeration, and then too much heat. The only bad aspect of that generation were those damn BGA chips. I have 3 YLOD fatties, and a bricked super slim, you know what's comming ;)
0x46 is not a percentage value, Control Fan Utility displays hexadecimal values from 00 to FF to indicate the speed level. Though it does not translate perfectly to percentages (the conversion is not linear) the hexadecimal value (0x)80 is 50% fan speed, while FF is 100%. There were readings of extracted data from some ps3 on a forum that showed the system's levels for regulating the fan, with a scheme of values and their corresponding speed%
The ps3 that I have is a backwards compatible it is over 8 years old still works it always got hot so I just didn't play it much but when I did that it stayed cool if I added a fan to the bottom where the hols are will it help or hurt it
I put a variable resistor on the fan from the 12v point on the PSU... It gets loud, but I have protection against my PS3 burning out. I also put high quality paste on the CPU
mister NSC, i know this video is kind of old, but i hope you can answer my questions, i have a 80GB fat model, not retrocompatible nor hacked yet with a black Psu, just replaced the thermal paste with artic msx 4, mine has no plastic wall in the inside 1.-removing the psu cover is safe? can it ark electricity to the disc drive and fry the console? or is it better just to remove the cover, drill it and put it back again? 2.-what about air compression in the fan, does drilling holes on the console lower the air pressure and affects the air flow? 3.- do you leave the plastic cover with the PlayStation 3 letters on it or do you remove it as it seems to cover the drilled holes? thanks in advance
Hello The black plastic PSU's runs not that hot, just let it like it is. Yes, drilling holes under the fan will let your console run really cooler and smoother, your fan will be able to get mor air and the airflow is ofcourse better to. Just search on my channel, you will find some more videos where i drilled the holes and where i did also some temperature tests. At last removing the IHS is the best you can do to your ps3. Cheers
how did you get the control fan utility? is from the custom firmware? just wondering because i dont like the idea of messing with wires and installing a potentiometer
ahh i see. well, thank you for that awesome video and demonstration. i will deffinitely buy one of those. maybe even the green one =) looks good. and u have a happy new years as well.
Yes, the air will be able to pass better thru the whole PSU. Better airflow, also cooler. This is only there for protection, but every one should know, that you better DON'T touch a running PSU 😅
Hi there. I just saw this mod. if I do how much the temperature down?. what do you think of putting thermal pads over the "batteries", chips or other components of the power supply. Greetings.
Hello it conforms how hot your PSU gets, but the diferences are just about 0.5-5C* degrees better. i had few weeks ago a PSU that realy gots about 70C* hot, CPU Temps was with this PSU about 75C* just in the PS3 Menu after 20min. After i Change the PSU to an other one, the CPU was only at 69C* after 30min. in the Menu... so it helps very much, because the CPU is seating directly under the PSU, when the PSU is overheating, the CPU will get hot to... and no, no Need put thermal pads over the Baterrie or under the PSU... Better get the PSU a bit higher, or if it´s a real HOT PSU u better Change it, or place the PSU External like my other crazy Video ;)
Hey bro, I love your videos, but I have a question. I am currently installing a fan directly on top of the PSU, with the air direction pointing straight up so it blows the fucking heat up and out of the console, and I cut a huge hole in the top of the PSU metal case, and I made a huge hole on the top of the PS3 case so the fan can have room when the case is put back on. My main question is, I need to find a +5v and +12v power source to install the molex cable. I can't find a video or pics on the net that show pins on the CECH-A01 launch console that show detailed pics for the 12v and 5v spots so that I can solder in my molex cable to finish my mod. Can you either show me pics of where to solder my molex cable, or make a short video for it so I can complete my job and play my PS3? So far, I have replaced the thermal paste with Antec Formula 7, (nano Diamond thermal compound), on the GPU and CPU, under and on top of the heat spreaders, and added copper shims as well. I have replaced all the thermal silicone conductive heat pads in the console with brand new ones. I have replaced the super hot PSU, with the cooler running APS-226, many years ago, and replaced the 15 blade fan with the more efficient 19 blade fan. I have ordered a brand new potentiometer fan control to place outside the PS3 for controlling the fan speeds, and I have drilled the holes on the bottom of the console where the fan is located like yours, and in the area where the HDD is located for better cooling, (holes drilled on the top for my ODE modded PS3 Slim though and on the bottom for all around cooling). I think after I get the adjustable fan mod in the mail and install that, and get this fan above the PSU installed, this PS3 is ready to last forever as I have had it since launch day, and it works like a tank! I might show my vids as well, as I love modding these things! :D My 360 is modded pretty nice as well, and I want to make these things last a very long time! Thanks for your time, and I hope you can help me finish this mod.
Hehe, Thank you very much. I will upload you soon 2 Points, one for 5volts, and one with 12v. It conforms also your FAN, will you use a 120mm Fan or Smaller? 120mm are the best in my eyes, thei are Cool and quite. The 120mm Fans needs mostly 12volts, otherwise thei will run to slow... BTW: The CECH-Axx Versions are the hottest PS3´s ever xD (No Kidding) ^^
Thanks, but it is a bit pointless now. I just bought the fan mod with external excellerator, and I drilled all the holes in the top of the case, and ripped off the top of the PSU for airflow. I then attempted to wire up the fan to one of the two pins that are 12v going from the underside of the PSU and I used ground on the outer part of the metal casing, and turned on the PS3. It was on for about 8 seconds, the fan never turned on, and the system shut off. I now have the YLOD. After attempting to do everything on this planet to make the PS3 "YLOD proof", I have just killed my PS3 and gave it the YLOD in the very last step in making it future proof. This is my 3rd dead PS3 CECH-A01 unit and my LAST PS3 that I am going to buy. To hell with the PS3, I am done with the fucking thing. I guess it is time to throw all these in the trash and finally get a damn PS4. The PS3 is just way to damn unstable. It's a damn same the 360 is also a piece of shit that dies all the time. This gen of gaming just sucked. :P
you sayd all i wanted to say, BUT... the PS3 Slims CECH-200x and 210x are very good products... so if you have Cut the IHS and made a Fan Adjuster, this Models runs realy Long... But yeah, i can fell you xD
Yeah, actually I have 4 dead PS3s now because 3 of them have YLOD and one has a dead video output which displays strange colors and then overheats. CECH-A01s would have been great consoles, as they can play all PS1, PS2 and PS3 games but the death rate is complete bullshit. I own the slim 3006b crimson red unit, and I changed out the heat spreaders with copper shims, and used diamond thermal compound on that one, and have the fan mod, and made holes above the fan and I run the fan super loud so it runs cool, so it is a good console, but there is only 2 damn usb ports now instead of 4, there are no memory card ports, no super audio cd support and no damn PS2 backward compatibility. The PS2 BC meant a LOT to me, and I loved playing the PS2 games in 1080p upscaled. If the Slim had that capability then I would not mind so much, but the Slim feels like a downgrade from the CECH-A01 units, and it is not as beautiful to look at either. This YLOD shit really pisses me off, and it kills me to know that I am stuck with a slim PS3 now. I guess I ordered the PS3 fat crap all for nothing as nothing can stop them from dying. If SONY would have used their heads and just built the power brick outside of the console, and used leaded solder, then I think the PS3 would have been a great console from day one. But they tried to over do everything, and all they built in the end is a beautiful, heavy, ticking time bomb. :( Oh well, I guess I am going to use the Slim now and just be done with the CECH-A01s. Goodbye backward compatibility. 4 PS3s off to the trash bin. Thanks for the videos though, they were really neat ideas.
I just got a new in box ps3 fatty cecha01. How is this fan control installed? I feel I've got a second chance my first fatty died years ago don't want to kill this one.
I only took the top off of the psu and did a thermal paste change keep in the open so I had plenty of ventilation and it was quiet but I only played it for 1 hour either way I shouldn’t over heat
hello my friend nsc i have one problem i have a pse cechc 04 i have it jailbroken.One day not open not have power i change psu from a cechg 04 not open again.After 2 3 weeks try again and open but when i try to go to multiman or webman just freezes and black screen all the time until not open again.what is the problem of my ps3 my friend?
NSC thank i make it now not freezes but do not read disks.i have a blu ray 410 from cechl 04.what i your think to take laser to fix the 400 blu ray or buy a board and remarry the 410?
Ich hätte mal eine Frage. Ich habe eine Cech3004A bei der das Netzteil kaputt ist bzw. Komische Geräusche macht. Hättest du noch solch ein Netzteil da ? Also ein Aps-185 ?
UltraNSC Okok, even if its an APS226 on a CHECHA01? I know shit about electricity, so kinda thought one of those coils could zap the whole system if there's a spike or something. I can get an APS231 for cheap; is it worth it? Thank you so much for the fast response, keep up the good work!
Firmware is what the console is updated to,he is on a CFW firmware/as know as jailbroken thats how he can control his fan speed and watch his temps a normal console will run much hotter cause you wont be able to install a homebrew fan control app on a OFW ps3 depending on your model all you need is a E3 nor flasher to jailbreak it.
Hi NSC, Hab da mal eine Frage bzgl. des Netzteils und zwar hab ich eine PS3 60GB Version ( CHECH04), in der eine APS 227 verbaut ist. Ich würde da gerne die Temperatur etwas absenken und, weil das Netzteil schon extrem heiß wird. Sollte ich da erstmal versuchen das Netzteil durch ein anderes zu ersetzen? Hab nämlich gelesen, dass das APS 231 passen und dabei kühler laufen soll. Kannst du dieses Netzteil empfehlen?
Hi Die frage ist, wie weit bist du begabt xD Du könntest den Deckel abnehmen und ein 120er Ventilator oben anbringen. Oder so wie ich in mein anderen Video, Das Netzteil komplett raus holen (Extern laufen lassen) Lg.
UltraNSC Danke für die schnelle Antwort! Also wird ein Wechsel keine großartigen Verbesserungen bringen, richtig? Ich probiere es trotzdem einfach mal, weil die Dinger kaum was kosten bei eBay und co. Wenn das nix bringt, dann nehme ich einfach die Abdeckung runter und lasse das Netzteil nackt laufen :D LG und weiter so mit den Videos!
Auch nach 7 Jahren immernoch geil. Hab mir vor kurzem ne PS3 Fat auf eBay gekauft, das ding wird nur übelst heiß. Hab mir letztens dein Video angeguckt wo du diesen Massiven Wasserblock mit Zeug einschmierst um eine PS3 Wasserkühlung zu bauen und hab mich gefragt... jetzt in 2020, gibt es da villeicht eine coolere Lösung? Könntet du mir ein paar Tipps geben bezüglich Teile? Möchte diese PS3 gern weiterleben lassen, bin aber nicht gerade berüchtigt für meine modding Skills..
hallo.....hab das netzteil 2 tage ohne deckel nackt laufen lassen!! es gehört dazu gesagt das man ohne dem blech auf dem netzteil die ps3 keinesfalls vertikal betreiben sollte weil die hitze sich dann im BRlaufwerk sammelt und so wie es bei mir war, der lüfter auf höhster stuffe lief und beim öffnen der ps3 war das laufwerk so heiss wie das netzteil daneben!! vielleich wären löcher im blech besser...dazu einen 120mm lüfter der die hitze im vertikalen betrieb seitlich absaugt!!! horizontal steigt die wärme schön durch die bohrungen aber vertikal nicht zu gebrauchen!!
wie meinst du geköpft?? hab oben löcher reingebohrt wie beschrieben!! das netzteil leicht angehoben!! die plastik teile abgerisssen und das blech entfernt!! im vertikalen betrieb steigt die hitze eben vom netzteil nach oben zum BRplayer weil das blech die wärme nicht abschirmt!! vorher lief sie nie so heiss und die fat lady ist schon seht alt 😄 das war das erste mal seit ich eben das netzteil nackt gemacht hab ;) hab jetzt das blech durchlöchert und die wärme steigt hinauf ( horizontal betrieben) durch die bohrungen. vertikal muss ichs jetzt nochmal probieren!! aber trau mich nicht! trotzdem läuft sie um einiges cooler als vorher!! bist mein held😉
WHEN YOU TAKE THE PSU POWERSUPPLY COVER OFF, WHEN THE PS3 IS POWERED UP THE TOP OF THE LARGE CAPACITORS TO GROUND, 65 VOLTS AC, THE LARGE HEAT SINK NEXT TO THE BLUE RAY , THE HEAT SINK IS 65 VOLTS TO GROUND, BE CAREFUL, WHEN SERVICING, WORKING POWERED UP, COVERS OFF.....................
very grateful for your video's , wanted you to know I found out by going inside and my blue ray touched the large heat sink . I saw sparks, I , there's alot of young techs out there something may happen, just to let you know
Thanks, this is really good. It would be nice if someone would show a good place to connect an added bottom fan to the CPU. Guess you could just find a connection with the right voltage that seems like a general distribution point?
Here is my mod, I drilled holes in my ps3 to keep it cool! That is totally a mod and not just ruining a PS3 forever by putting holes in the case! Reminds me of all of the pc mods I would see done in videos by people like 8-Bit Guy where someone just put a giant hole with a fan into an old computer as though that is gonna keep it cool and he had to try and fix the giant hole!
Yea, and a 120mm Fan over the place where the PSU was, sure, its the best also for the Cooling! But this mod is also better then it is befor, so for the peoples who dont want to take out the PSU, thei can make it like this :) Cheers bro.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Great thanks. "No Panic On Titanic" so funny
@Massimiliano Rota
Removing the IHS and apply new paste its makes maybe about 2-3C* Cooler, but its Danger to open the CELL CPU, so if your fan is not turning crazy, u can let it Close.
more important are the Holes on the Case for better air flow... with the holes on the case your PS3 will be about 10C* Cooler as befor!
and than it also conforms wich Modell u have, some runs hotter and some Cooler, some needs also more Energy, and some are Energy saver.
But the Holes is the best thing you can do to all the PS3 out there!
Than just do the Fan a bit faster, and you will have Temps about 50-64C* at LOAD = in game... without all this mods, your Console gets standart over 95C* and a YLOD begins at 85C*, so we can say, all standart PS3 Consoles runs Hot, and thats why Sony should update them Firmwares, and set the Fan a bit faster :\
realy a shame for Sony, thei just want be Silence, and the rest is not important we can say pfff
PEACE ;)
aggree, every ps3 fat not properly modded will get ylod..btw thanks for the reply, keep on with your vids, love them (:
thank you very much, also for your feedback ;)
wish u the best.
You're right, but the main problem of every PS3 models always will be BGA. WHO THE FUCK INVENTED THAT? Why not a regular socket just like in old processors? The fat models were wrongly designed, processors were too big, so much comsumption, bad refrigeration, and then too much heat. The only bad aspect of that generation were those damn BGA chips. I have 3 YLOD fatties, and a bricked super slim, you know what's comming ;)
0x46 is not a percentage value, Control Fan Utility displays hexadecimal values from 00 to FF to indicate the speed level.
Though it does not translate perfectly to percentages (the conversion is not linear) the hexadecimal value (0x)80 is 50% fan speed, while FF is 100%.
There were readings of extracted data from some ps3 on a forum that showed the system's levels for regulating the fan, with a scheme of values and their corresponding speed%
Right, but look how old this video is xD
I've done the same cooling mods and it never got hot maybe warm but not hot thx it really does help.
Good to know, thank you to :)
The ps3 that I have is a backwards compatible it is over 8 years old still works it always got hot so I just didn't play it much but when I did that it stayed cool if I added a fan to the bottom where the hols are will it help or hurt it
The most important are the IHS
Kinda encourages me to buy an 80gb fat I’ll give this a try
These mods work great. Approved.
For sure 😉
I put a variable resistor on the fan from the 12v point on the PSU... It gets loud, but I have protection against my PS3 burning out. I also put high quality paste on the CPU
13:20 Are you a Rammstein fan?
No xD
mister NSC, i know this video is kind of old, but i hope you can answer my questions, i have a 80GB fat model, not retrocompatible nor hacked yet with a black Psu, just replaced the thermal paste with artic msx 4, mine has no plastic wall in the inside
1.-removing the psu cover is safe? can it ark electricity to the disc drive and fry the console? or is it better just to remove the cover, drill it and put it back again?
2.-what about air compression in the fan, does drilling holes on the console lower the air pressure and affects the air flow?
3.- do you leave the plastic cover with the PlayStation 3 letters on it or do you remove it as it seems to cover the drilled holes?
thanks in advance
Hello
The black plastic PSU's runs not that hot, just let it like it is. Yes, drilling holes under the fan will let your console run really cooler and smoother, your fan will be able to get mor air and the airflow is ofcourse better to. Just search on my channel, you will find some more videos where i drilled the holes and where i did also some temperature tests. At last removing the IHS is the best you can do to your ps3. Cheers
Instead of carton I added some washers. The PCB of the PSU seems to be a little bit warped, will it be OK?
yea, should be great to, just take care that it has no contacts to other contacts ^^
What's the point of drilling holes when you cover them with plastic afterwards?
LoL?
@@NSC-Modz You drilled holes over PSU (10:10). And then you covered them with that shiny PS3 plastic which is on top of the console.
Now i got you, of course this part should stay out ^^
Thank you for your mod my playstation 3 so quiet now
how did you get the control fan utility? is from the custom firmware? just wondering because i dont like the idea of messing with wires and installing a potentiometer
Hi
The Control Fan Utility is just for CFW!
But i got you a better thing then this, and you DONT need to cut and mess with some wires, just take here a look and enjoy ;)
Protect your PS3 with a Fan Mod Speed Controller to avoid a YLOD By:NS©
Wish you the best and wish u a Happy New Year soon ;)
ahh i see. well, thank you for that awesome video and demonstration. i will deffinitely buy one of those. maybe even the green one =) looks good. and u have a happy new years as well.
tyvm :)
Bring es was. Wenn man die Netzteil Abdeckung ab macht?
Yes, nicht viel aber es kann besser kühlen.
Would you still recommend removing the psu ihs shield?
Yes, the air will be able to pass better thru the whole PSU.
Better airflow, also cooler.
This is only there for protection, but every one should know, that you better DON'T touch a running PSU 😅
Just put it in a fridge and play like that haha :D
Hi there.
I just saw this mod. if I do how much the temperature down?.
what do you think of putting thermal pads over the "batteries", chips or other components of the power supply.
Greetings.
Hello
it conforms how hot your PSU gets, but the diferences are just about 0.5-5C* degrees better.
i had few weeks ago a PSU that realy gots about 70C* hot, CPU Temps was with this PSU about 75C* just in the PS3 Menu after 20min.
After i Change the PSU to an other one, the CPU was only at 69C* after 30min. in the Menu... so it helps very much, because the CPU is seating directly under the PSU, when the PSU is overheating, the CPU will get hot to...
and no, no Need put thermal pads over the Baterrie or under the PSU...
Better get the PSU a bit higher, or if it´s a real HOT PSU u better Change it, or place the PSU External like my other crazy Video ;)
Hey bro, I love your videos, but I have a question. I am currently installing a fan directly on top of the PSU, with the air direction pointing straight up so it blows the fucking heat up and out of the console, and I cut a huge hole in the top of the PSU metal case, and I made a huge hole on the top of the PS3 case so the fan can have room when the case is put back on. My main question is, I need to find a +5v and +12v power source to install the molex cable. I can't find a video or pics on the net that show pins on the CECH-A01 launch console that show detailed pics for the 12v and 5v spots so that I can solder in my molex cable to finish my mod. Can you either show me pics of where to solder my molex cable, or make a short video for it so I can complete my job and play my PS3?
So far, I have replaced the thermal paste with Antec Formula 7, (nano Diamond thermal compound), on the GPU and CPU, under and on top of the heat spreaders, and added copper shims as well. I have replaced all the thermal silicone conductive heat pads in the console with brand new ones. I have replaced the super hot PSU, with the cooler running APS-226, many years ago, and replaced the 15 blade fan with the more efficient 19 blade fan. I have ordered a brand new potentiometer fan control to place outside the PS3 for controlling the fan speeds, and I have drilled the holes on the bottom of the console where the fan is located like yours, and in the area where the HDD is located for better cooling, (holes drilled on the top for my ODE modded PS3 Slim though and on the bottom for all around cooling).
I think after I get the adjustable fan mod in the mail and install that, and get this fan above the PSU installed, this PS3 is ready to last forever as I have had it since launch day, and it works like a tank! I might show my vids as well, as I love modding these things! :D My 360 is modded pretty nice as well, and I want to make these things last a very long time! Thanks for your time, and I hope you can help me finish this mod.
Hehe, Thank you very much. I will upload you soon 2 Points, one for 5volts, and one with 12v.
It conforms also your FAN, will you use a 120mm Fan or Smaller? 120mm are the best in my eyes, thei are Cool and quite. The 120mm Fans needs mostly 12volts, otherwise thei will run to slow...
BTW: The CECH-Axx Versions are the hottest PS3´s ever xD (No Kidding) ^^
Thanks, but it is a bit pointless now. I just bought the fan mod with external excellerator, and I drilled all the holes in the top of the case, and ripped off the top of the PSU for airflow. I then attempted to wire up the fan to one of the two pins that are 12v going from the underside of the PSU and I used ground on the outer part of the metal casing, and turned on the PS3. It was on for about 8 seconds, the fan never turned on, and the system shut off. I now have the YLOD.
After attempting to do everything on this planet to make the PS3 "YLOD proof", I have just killed my PS3 and gave it the YLOD in the very last step in making it future proof. This is my 3rd dead PS3 CECH-A01 unit and my LAST PS3 that I am going to buy. To hell with the PS3, I am done with the fucking thing. I guess it is time to throw all these in the trash and finally get a damn PS4. The PS3 is just way to damn unstable. It's a damn same the 360 is also a piece of shit that dies all the time. This gen of gaming just sucked. :P
you sayd all i wanted to say, BUT... the PS3 Slims CECH-200x and 210x are very good products... so if you have Cut the IHS and made a Fan Adjuster, this Models runs realy Long...
But yeah, i can fell you xD
Yeah, actually I have 4 dead PS3s now because 3 of them have YLOD and one has a dead video output which displays strange colors and then overheats. CECH-A01s would have been great consoles, as they can play all PS1, PS2 and PS3 games but the death rate is complete bullshit.
I own the slim 3006b crimson red unit, and I changed out the heat spreaders with copper shims, and used diamond thermal compound on that one, and have the fan mod, and made holes above the fan and I run the fan super loud so it runs cool, so it is a good console, but there is only 2 damn usb ports now instead of 4, there are no memory card ports, no super audio cd support and no damn PS2 backward compatibility.
The PS2 BC meant a LOT to me, and I loved playing the PS2 games in 1080p upscaled. If the Slim had that capability then I would not mind so much, but the Slim feels like a downgrade from the CECH-A01 units, and it is not as beautiful to look at either. This YLOD shit really pisses me off, and it kills me to know that I am stuck with a slim PS3 now. I guess I ordered the PS3 fat crap all for nothing as nothing can stop them from dying.
If SONY would have used their heads and just built the power brick outside of the console, and used leaded solder, then I think the PS3 would have been a great console from day one. But they tried to over do everything, and all they built in the end is a beautiful, heavy, ticking time bomb. :( Oh well, I guess I am going to use the Slim now and just be done with the CECH-A01s. Goodbye backward compatibility. 4 PS3s off to the trash bin.
Thanks for the videos though, they were really neat ideas.
yeah, Sony FTW pff
PS4 is my next Operation, still Heat issues :\
The Ps3 Slim 3xxx is Cool, but at last not Downgradeable ^^
I just got a new in box ps3 fatty cecha01. How is this fan control installed? I feel I've got a second chance my first fatty died years ago don't want to kill this one.
I only took the top off of the psu and did a thermal paste change keep in the open so I had plenty of ventilation and it was quiet but I only played it for 1 hour either way I shouldn’t over heat
which temps i will get without removing the heatspread with the fan at 50-60%?
Doomguy yes
Yo muss ich ein bisschen warten nach der Benützung von meiner C04 bevor ich die Abdeckung weg mach? will mi net an den Kondensatoren elektrisieren >P
NSC thanks for your videos!!! please can you tell me if its safe to take the psu cover and then close the ps3? im afraid it will explode! lol
Hello how were you able to take psu cover off. Thanks
its easy, it has on all sides a Click system...
ill do 2morow a quick vid. about... ok?
Wish u the best ;)
how much do you charge for a ps3? i need a new one
hello my friend nsc i have one problem i have a pse cechc 04 i have it jailbroken.One day not open not have power i change psu from a cechg 04 not open again.After 2 3 weeks try again and open but when i try to go to multiman or webman just freezes and black screen all the time until not open again.what is the problem of my ps3 my friend?
Hello I think the problem is your bluray device
@@NSC-Modz me too what i can i put one other ?
i have 2 olds who not reading didks bluray if i will put them want remarry?
NSC thank i make it now not freezes but do not read disks.i have a blu ray 410 from cechl 04.what i your think to take laser to fix the 400 blu ray or buy a board and remarry the 410?
I was trying figure out how to disperse the heat from the power supply for a while thank you
+Aaron Gooch np :)
Ich hätte mal eine Frage.
Ich habe eine Cech3004A bei der das Netzteil kaputt ist bzw. Komische Geräusche macht.
Hättest du noch solch ein Netzteil da ? Also ein Aps-185 ?
Gibt's auf ebay neu für 25€
Hey NSC is it risky to keep an open PSU inside the PS3 like that? Could it zap and fry the motherboard or something?
megamanu64 Hi... Risky? It´s the best you can do for your PS3, under the PSU is the CPU sitting, and the CPU gets very Hot because this shit PSU ^^
UltraNSC Okok, even if its an APS226 on a CHECHA01? I know shit about electricity, so kinda thought one of those coils could zap the whole system if there's a spike or something. I can get an APS231 for cheap; is it worth it? Thank you so much for the fast response, keep up the good work!
yes, should be nearly the same PSU and it will work :)
hey buddy whats the step to get the fan control and whats the firm where please help. ?? thank you . David👍
Firmware is what the console is updated to,he is on a CFW firmware/as know as jailbroken thats how he can control his fan speed and watch his temps a normal console will run much hotter cause you wont be able to install a homebrew fan control app on a OFW ps3 depending on your model all you need is a E3 nor flasher to jailbreak it.
not anymore.
so you told us what you did but can you please explain exactly how you did it & what you used?
yes sure, tell me what u like to know all, i will answer u.
maybe i sdo soon one more video where i will show all stepp by stepp.
Regards
Hi NSC,
Hab da mal eine Frage bzgl. des Netzteils und zwar hab ich eine PS3 60GB Version ( CHECH04), in der eine APS 227 verbaut ist.
Ich würde da gerne die Temperatur etwas absenken und, weil das Netzteil schon extrem heiß wird.
Sollte ich da erstmal versuchen das Netzteil durch ein anderes zu ersetzen? Hab nämlich gelesen, dass das APS 231 passen und dabei kühler laufen soll. Kannst du dieses Netzteil empfehlen?
Hi Die frage ist, wie weit bist du begabt xD
Du könntest den Deckel abnehmen und ein 120er Ventilator oben anbringen.
Oder so wie ich in mein anderen Video, Das Netzteil komplett raus holen (Extern laufen lassen)
Lg.
UltraNSC Danke für die schnelle Antwort! Also wird ein Wechsel keine großartigen Verbesserungen bringen, richtig?
Ich probiere es trotzdem einfach mal, weil die Dinger kaum was kosten bei eBay und co.
Wenn das nix bringt, dann nehme ich einfach die Abdeckung runter und lasse das Netzteil nackt laufen :D
LG und weiter so mit den Videos!
ist das beste was du machen kannst :)
yea just separating the psu, great solution tanks!
@@davedm6345 yeah, but the psu needs to be cooled extra :)
Auch nach 7 Jahren immernoch geil. Hab mir vor kurzem ne PS3 Fat auf eBay gekauft, das ding wird nur übelst heiß. Hab mir letztens dein Video angeguckt wo du diesen Massiven Wasserblock mit Zeug einschmierst um eine PS3 Wasserkühlung zu bauen und hab mich gefragt... jetzt in 2020, gibt es da villeicht eine coolere Lösung? Könntet du mir ein paar Tipps geben bezüglich Teile? Möchte diese PS3 gern weiterleben lassen, bin aber nicht gerade berüchtigt für meine modding Skills..
Leave that one cover off it and it will stay even cooler
are you talking about the ps3 top cover of the console ? So, just leave the ps3 console top cover off ?
Thx mate, this is very helpful ! Just one question, is there any danger removing the case from my cpu?
YES, you need a real thin tool, or you could scratch the CPU!
UltraNSC Done, and success! I also create holes on plastic case of ps3, and now ps3 is really much more cooler :) Thank you for all your great tips ;)
No Problem man ;)
hallo.....hab das netzteil 2 tage ohne deckel nackt laufen lassen!!
es gehört dazu gesagt das man ohne dem blech auf dem netzteil die ps3 keinesfalls vertikal betreiben sollte weil die hitze sich dann im BRlaufwerk sammelt und so wie es bei mir war, der lüfter auf höhster stuffe lief und beim öffnen der ps3 war das laufwerk so heiss wie das netzteil daneben!!
vielleich wären löcher im blech besser...dazu einen 120mm lüfter der die hitze im vertikalen betrieb seitlich absaugt!!!
horizontal steigt die wärme schön durch die bohrungen aber vertikal nicht zu gebrauchen!!
Hi Bist der erste der damit Probleme hat. .. wenn deine PS3 nicht geköpft ist, dann kommt das überhitzen nicht nur vom Netzteil :)
wie meinst du geköpft??
hab oben löcher reingebohrt wie beschrieben!!
das netzteil leicht angehoben!! die plastik teile abgerisssen
und das blech entfernt!!
im vertikalen betrieb steigt die hitze eben vom netzteil nach oben zum BRplayer weil das blech die wärme nicht abschirmt!!
vorher lief sie nie so heiss und die fat lady ist schon seht alt 😄
das war das erste mal seit ich eben das netzteil nackt gemacht hab ;)
hab jetzt das blech durchlöchert und die wärme steigt hinauf ( horizontal betrieben) durch die bohrungen.
vertikal muss ichs jetzt nochmal probieren!!
aber trau mich nicht!
trotzdem läuft sie um einiges cooler als vorher!!
bist mein held😉
hehe Danke :) ruclips.net/video/N6UkmWoU1gE/видео.html
WHEN YOU TAKE THE PSU POWERSUPPLY COVER OFF, WHEN THE PS3 IS POWERED UP THE TOP OF THE LARGE CAPACITORS TO GROUND, 65 VOLTS AC, THE LARGE HEAT SINK NEXT TO THE BLUE RAY , THE HEAT SINK IS 65 VOLTS TO GROUND, BE CAREFUL, WHEN SERVICING, WORKING POWERED UP, COVERS OFF.....................
65 volts???
. . .
very grateful for your video's , wanted you to know I found out by going inside and my blue ray touched the large heat sink . I saw sparks, I , there's alot of young techs out there something may happen, just to let you know
Hi, ich habe mal eine Dumme Frage. Kann man die obere Abdeckung der PSU nicht einfach weglassen?
Danke schon mal im voraus für die Antwort :)
Hi Das war keine Dumme frage... Ja, kannst du weg lassen, ist das beste was du tun kannst.
Danke, für deine Antwort. Und werde ich machen :)
gerne :)
Yes I got it, thanks.
Thanks, this is really good. It would be nice if someone would show a good place to connect an added bottom fan to the CPU. Guess you could just find a connection with the right voltage that seems like a general distribution point?
How to get custom firmware?
Check MrMario111 on RUclips
OMG I can't believe it Lol how did you put Chrome on a 40GB model
Not difficult if you have enough parts around xD
Hello, after this work my ps3 not to be a cool down.why?
finally, I can turn my pants brown everytime i open my ps3
😂 if this is your only problem yeah 😅
i have the cechg04. with aps-231 power suply.
Here is my mod, I drilled holes in my ps3 to keep it cool! That is totally a mod and not just ruining a PS3 forever by putting holes in the case! Reminds me of all of the pc mods I would see done in videos by people like 8-Bit Guy where someone just put a giant hole with a fan into an old computer as though that is gonna keep it cool and he had to try and fix the giant hole!
Sry, meinte CECHC- 04 :D
Thanks
You Welcome ;)
40% on the 60gig onez is the highest i can tolerate :*
good video man
I still think that the PSU should be external....
Yea, and a 120mm Fan over the place where the PSU was, sure, its the best also for the Cooling!
But this mod is also better then it is befor, so for the peoples who dont want to take out the PSU, thei can make it like this :)
Cheers bro.
I need that cid :/
wich cid? what u mean with cid?
Need that to mod some games online :/ Its in the Flash Dump file :P
ahh lol
Ahja ich denke mal deutsch
Ja auch ^^