Vauxhall Zafira 1.6 engine wont start. Watch how I fixed mine.

Поделиться
HTML-код
  • Опубликовано: 1 дек 2024

Комментарии • 17

  • @theeroteme8069
    @theeroteme8069 Год назад

    This fixed my problem, thanks for the upload 👍

  • @adriancullum-iu7bp
    @adriancullum-iu7bp 8 месяцев назад +1

    Thankyou so much 👍

  • @terelagumbay7584
    @terelagumbay7584 2 года назад +1

    Ayos ah,alam mo palitan yang parts ng car mo.Kahanga hanga

  • @lhoychannel536
    @lhoychannel536 2 года назад

    astig mo bro,di na kailangan ng mekaniko

  • @GETUNLOCKING
    @GETUNLOCKING 9 месяцев назад

    Sir mine still
    Has problem after changing fuse and old ome was ok

  • @themattprincebrotv2369
    @themattprincebrotv2369 Год назад +1

    Idol yung akin nag click clcik..tpos d na mag tutuloy..pero pag nasiries ok na..battery lang kaha to

    • @AllscanTwelve
      @AllscanTwelve  Год назад

      Naiwan mo ba sya ng matagal na di napaandar? Halos 3 weeks ko Di napaandar dahil nagbakasyon kami pabalik ko drain na battery ko. Nakalimutan ko kasi I disconnect bago nagbakasyon. No choice than to buy a new battery.

  • @tunisiaforever8789
    @tunisiaforever8789 Год назад

    I had vauxhall zafira tourer diesel CDTI,,, I put new battery,,, but the car won't start,, any help please

  • @catonehere
    @catonehere 2 года назад

    Which fuse is it?

  • @raportzlondynujakgdzieikie8571
    @raportzlondynujakgdzieikie8571 2 года назад

    Helpfull

  • @ozanzozan3498
    @ozanzozan3498 9 месяцев назад

    Hello brother my car not working no accu opel meriva 1.4 2009

  • @onlythetruthfull
    @onlythetruthfull 2 года назад

    looks like you have DIY a 7.5 fuse to 60 amp or more very dangerous, try just one or two strands or the next higher fuse.

    • @AllscanTwelve
      @AllscanTwelve  2 года назад

      I did not use a DIY 7.5 amp fuse and using a different fuse than what is required is potentially dangerous. I agree to you with that. If you review the video at about 3:00, you'll see that I used the same fuse amp (7.5amp) but just different design which is doesn't matter for as long as the same load capacity. Since doing this, I haven't had any issues with my car not starting. All working perfectly up to this moment.