1/10 Scale TRX4 NEW BRONCO IFS(front)- SSD Portal Delete)(rear) Sand Off-road driving 4X4 RC Car
HTML-код
- Опубликовано: 8 фев 2025
- Camera - iphone 15Pro(4K, 60fps, 0.5x slow motion)
Gimbal - ZHIYUN Smooth4
Front Axle - element enduro IFS Conversion Kit Use(Drive shaft and servo mount machining required)
Rear Axle - SSD portal Delete kit use
Chassis - Traxxas TRX4 324mm
Body - TRX4 FORD BRONCO 2021 | Parts No. 9211 |
Tire - RC4WD 1.9
Wheel - 1.9 Aluminium wheel aliexpress
Bumper - stock
Shock - stock(a little bit of 100 oil)
Esc - HOBBYWING 1080
Motor - HACK MOTOR 540 55T
Servo - Waterproof 20kg
Side step - stock
interior - CCHAND
LED - Aliexpress TRX4 BRONCO 2021 LED Kit
Roof rack & search-light - CCHAND
Bettery - 3s lipo 2200mah
![1/8 Scale FORD F-150 raptor TractionHobby [KM] Sand & mud off-road driving Rescue Action 4X4 RC Car](http://i.ytimg.com/vi/PtkSz5LRE8s/mqdefault.jpg)
![1/8 Scale FORD F-150 raptor TractionHobby [KM] Sand & mud off-road driving Rescue Action 4X4 RC Car](/img/tr.png)
오랜만에 보는 브롱코영상이네요!~ 자갈밭 주행과 물가에 잠깐 발당구고나오는 멋진 브롱코네요!~ 모래주행도 멋지게 담은 영상 잘 봤습니다!~^^
항상 좋은 말씀과 시청 감사드립니다^^ 네 몇개월만에 굴렸네요 주행하다보내 보완할 점도 찾게되었어서 좀 더 보완과 정비후에 더 재미있게 굴려야될 것 같아요 감사드리며 오늘도 즐거운 하루되세요!
There is some sort of secret ingredient to your videos and some how has me absolutely engaged! Absolutely outstanding videos you make!!
Thank you, friend, for always saying kind words and watching my videos. I'm just trying to look the way I like and have fun riding. There are still many difficult parts, so I think I need to work hard. I will try my best to make better videos in the future. Thank you for having a great day today.
Yep, excellent work again, loved it, liking this venue also
Thank you, friend, for always saying kind words and watching my videos. I really like this place too. But I think it's a difficult place to film. Your feet get stuck in the sand a lot, and it's really difficult to get the angle right because of the sand dunes in between. I will try my best to make better videos in the future. Thank you for having a great day today.
Дуже гарний автомобіль і чудове відео 👍💪🙂👍
Дякую тобі, друже, що завжди говориш добрі слова і дивишся мої відео. Давно мені було важко їздити по піску. Хоча це було весело. Дякую за чудовий сьогоднішній день.
Nice crawling video👍
Thanks for the kind words and watching my video, friend. Thank you for having a great day today.
스페어 타이어 커버가 고급져보이네요
푹푹 빠질듯한데 너무 잘가는거 아닙니까 ㅎㅎ
항상 좋은 말씀과 시청 감사드립니다^^ 실제로는 정말 많이 빠져서 나오지도 못했었습니다^^ 푹푹빠지기도하고 앵글잡기도 너무 힘들더라구요 언제한번 뵈야되는데... 날씨가 춥네요 오늘도 즐거운 하루되세요!
멋진 파란색 브롱코 오랜만에 보네요! 차체를 낮추어 놓은것도 멋있어 보입니다. 모래 언덕을 스무스하게 정말 잘 넘어가시는것 같습니다. 역시 모래밭에서는 브롱코만큼 멋진게 없는것 같네요. 멋진 영상 잘 봤습니다👍
늘 좋은 말씀과 시청 감사드립니다^^ 네 거의 5개월만에 굴렸네요^^ 이번에 굴리면서 다른 보완점도 찾을 수 있었네요 발열이 있어서 좀 더 달리고 싶었지만 그러질 못했습니다.. 기어비변경으로 여러가지 세팅이 바뀌게되네요 그래도 움직임이 재미있어서 보완만 잘되면 자주 굴릴 것 같습니다 오늘도 즐거운 하루되시구요!
That is a beautiful rig!
Thank you for always kind words, friend. I really like the design of the new Bronco. I want to drive more when the weather gets cooler soon. Thank you for having a great day today.
You make great videos! Really great angles, great locations and great RC cars!👍👍👍
Thanks for the kind words and watching my video, friend. I have a lot of fun filming my favorite rides and going off-road in my favorite cars. Thank you friend. happy new year.
Awesome footage 👏 ❤
Thanks for the kind words and watching my video, friend. Thank you for having a great day today.
Very nice video
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Thank you, friend, for always saying kind words and watching my videos. It was fun driving a Bronco after a long time. Thank you for having a great day today.
Nice video. Looks great in the sand
Thanks for the kind words and watching my video, friend. Driving in sand is really difficult, but it seems fun. Thank you for having a great day today.
Great looking truck, very nice :)
Thanks for the kind words and watching my video, friend. It was fun driving a Bronco after a long time. Thank you for having a great day today.
와 ㅋ 티알이에도 맞게 나오는군요!!! 더욱 실차감이 있는 주행이 될듯 합니다. !!! 👍🏼🤩
좋은 말씀과 시청 감사드립니다^^ 네 이래저래 가공해서 장착했는데 저는 아주 맘에 들고 움직임이 재미있더라구요 감사드리며 오늘도 즐거운 하루되세요!
오오 앞에 더블위시본? 캬 움직임 지대루네!👍👍👍
감사합니다 형님^^ 네 실차처럼 앞은 더블에 뒤는 스트레이트로 만들어본건데 좀 더 보완해서 제대로 달려야될 것 같아요
nice video
Thank you for always saying nice things and watching my videos, my friend. After changing to IFS axle, it looks more like a real car when driving and the movement is good. Thank you for having a nice day today.
Nice playground ! Whereabouts is it ? Great video .
Nice words and thanks for watching my video, friend. This place is not too far from where I live. But I think this place is a difficult place to drive and shoot. Have a nice day today, thank you.
Hello i was wondering how did you convert the trx4 into ifs2 kit i hope you have a video on your conversion journey thanks
Thanks for watching my video, friend. Unfortunately, I wasn't able to film a build video installing the IFS2 kit. To explain the process in the comments, I purchased the ifs2 kit and the rear portal delirium kit. And I used the rear diff gear to reduce speed and increase torque. You can find it if you search for TRX4 differential gear. Also, a motor pinion gear that can increase torque was installed and a short center shaft was installed. Installing the ifs2 on the trx4 requires some processing, but if you install the parts mentioned above, you will be able to find the parts that need processing and take on the challenge. Hope this helps. Thank you for having a great day today.
Are gear ratios of front axle and rear axle same? Can I use any gears for Element IFS kit? Or I need use Element gears set for their IFS kit. The most realistic RC crawler I have seen
Thanks for the kind words and watching my video, friend. The front and rear gear ratios seem to be almost similar. The problem I encountered when installing these axles was that when I removed all the portal axles, there was a problem with the gear ratio and the motor generated a lot of heat. But now I can enjoy it properly when I set the pinion gear to 9t and installed the motor to 45t or 55t. Hope this helps. Thank you for having a great day today.
@@EmotionalRc Thank you for replying. Maybe my question is not clear. I see you still use the original TRX4 gear ratio on the rear axle, keep stock gears set with lock/unlock diff feature, only remove portal parts. So in the IFS kit, do you still use the TRX4 gears set with the lock/unlock diff or did you replace it with another gears set?
@inhthanhngoc1167 No. My car rear axle uses an axle from TRX4 Sports, not an axle that locks the gears. And I installed a portal delete kit on that rear axle. You can easily purchase the portal delete kit by searching on eBay. So I'm still using the axle without the portal gear. I hope it helped.
@@EmotionalRc thanks so much. That’s helpful for me.
엘레먼트에서 ifs2가 출시되었더라고요 ㅎ 업글하시나요? 😅 멋진영상잘봤습니다.
늘 좋은 말씀과 시청 감사드립니다^^ 네 ifs2가 나왔더라구요^^ 1이 조금 단점이 엑슬의 두께에서 너무 두꺼운 느낌이 있는데 전 쉐이프웨이에서 얇게 만드는 파츠를 구입해서 장착했는데 괜찮더라구요^^ 아직까지 IFS2 엑슬킷은 판매하지 않고 있으니... 혹시라도 판매한다면 구입해보고 싶네요 감사드리며 오늘도 즐거운 하루되세요!
👍👍👍
Thanks for always watching my videos, friend. I really like the design of the Bronco. Thank you for having a great day today.
Rly nice, i bought this too. But my trx is now really fast and the left end goes hard down wenn accelerate :(
Thanks for the kind words and watching my video, friend. You have trx4. The trx4 is really durable and is a cool car. Perhaps the part where one side collapses creates reverse torque for some reason. Find the part and repair it
If you remove it, the symptom of one side collapsing will disappear. I hope it works out well. Thank you for having a great day today.
@@EmotionalRc ich have another question. After installing the ssd the car drove backwards bcs of the missing portals. So i programmed the remote and if i press normal gas it goes forward. But i have to push it two time like u have to do it when you drive backwards bcs of the break. What did you do?
Hi im also rc fan can you tell me what Suspension you use
I replied to your comment. Thank you for having a great day today.
Is that an element front suspension kit🎉🎉🎉?
Yah it says in the description. Ifs2 will give better performance now that it is available
Thanks for watching my video, friend. that's right. I machined an Element Endurer IFS front axle kit and installed it on my TRX4. Thank you for having a great day today.
@@EmotionalRc is there a tutorial for how to do it?
❤😊
Thanks for watching my video, friend. Driving in the sand was difficult, but it was really fun to drive in a Bronco after a long time. Thank you for having a great day today.
멋진영상입니다 저도 브롱코 작업해보려는데 IFS 작업이 많이 복잡한가요?
좋은 말씀 감사드립니다^^ 음.. 기본적으로 RC를 만지거나 공구들 있으면 크게 어려운 부분은 없었던 것 같아요 엑슬구조상 센터샤프트가 사선으로 바뀌게되어서 앞쪽에 샤프트도 짧은걸 사용해야되구요 간섭있는 부위를 갈아내야됩니다. 그리고 제일 까다로운 부분은 서보장착위치가 바뀌면서 조향링크가 짧아지게 되어서 전 그냥 갖고있는 부품을 이용해서 장착했었네요 음.. 글로 설명드리기는 쉽지않은 것 같네요. 간단히 말씀드리면 1:1로 바로교체해서 장착되는 구조는 아니구요 부분적으로 구조상 가공들이 필요하다고 말씀드릴 수 있을 것 같아요 그리고 제차량은 뒤에도 ssd 스트레이트킷장착으로 포탈엑슬을 모두 없앴습니다. IFS엑슬과의 기어비도 생각해야되는 부분이구요 도움이 되셨을지 모르겠네요 오늘도 즐거운 하루되시구요!
@@EmotionalRc 충분한 정보입니다 ㅎㅎ 감사합니다 멋있는 차 만들어보겠습니다