The wires from the fork mounted NAV lights are too short to plug into a Goldstrike distribution block. I ran the wires up the brake lines and fished them under the top panel just as shown in this video, but they are about six inches too short to touch the block. Really needs to be about a foot longer to comfortably reach a Goldstrike power distribution block that is mounted in the crevice at the rear of the gas tank. I plan to call Goldstrike in the morning and see if they have extensions. If not I’ll just splice in a 12 inch section. For as much as these things cost I shouldn’t have to do that.
@@cirosales2594 not helpful to rest of us. I have the fork lights and the vent trim to go in and now I am afraid they won't reach the distribution block.
helpful information but could you please show how did you pull the wires from the front part to the upper part before running the wires on the tank side ?
Hi Joseph, I would suggest the caliper cover be installed first. If the fork covered is installed, you may have to loosen it to get the caliper cover in place, but both work nicely together!
Hi Otto, here is the link to view pictures of them on shown on our website: goldstrike3d.com/products/goldstrike-led-fork-mounted-nav-lights-in-chrome-or-black?_pos=1&_sid=3ff6ec132&_ss=r
Would it be so hard to film a few seconds extra to show the result ? All that work, to be so proud of, to watch for so many people and not 1 second of the result ?@@ciro3d_goldstrike3d
Hi there, here is the link to view the installation instructions for more information! cdn.shopify.com/s/files/1/0171/5486/7300/files/G0048100_Goldstrike_Fork_Mounted_NAV_cdb790c6-6d05-4456-aa1a-f970b422f742.pdf?160
The wires from the fork mounted NAV lights are too short to plug into a Goldstrike distribution block. I ran the wires up the brake lines and fished them under the top panel just as shown in this video, but they are about six inches too short to touch the block. Really needs to be about a foot longer to comfortably reach a Goldstrike power distribution block that is mounted in the crevice at the rear of the gas tank.
I plan to call Goldstrike in the morning and see if they have extensions. If not I’ll just splice in a 12 inch section. For as much as these things cost I shouldn’t have to do that.
We answered this via phone
@@cirosales2594 not helpful to rest of us. I have the fork lights and the vent trim to go in and now I am afraid they won't reach the distribution block.
helpful information but could you please show how did you pull the wires from the front part to the upper part before running the wires on the tank side ?
You should show them in operation after the install...Waist video without the reveal...
which item is installed first, the fork covers or caliper cover?
Hi Joseph, I would suggest the caliper cover be installed first. If the fork covered is installed, you may have to loosen it to get the caliper cover in place, but both work nicely together!
What do do they look like on?
Hi Otto, here is the link to view pictures of them on shown on our website: goldstrike3d.com/products/goldstrike-led-fork-mounted-nav-lights-in-chrome-or-black?_pos=1&_sid=3ff6ec132&_ss=r
Would it be so hard to film a few seconds extra to show the result ? All that work, to be so proud of, to watch for so many people and not 1 second of the result ?@@ciro3d_goldstrike3d
So you didn't show where to plub them in????
Hi there, here is the link to view the installation instructions for more information! cdn.shopify.com/s/files/1/0171/5486/7300/files/G0048100_Goldstrike_Fork_Mounted_NAV_cdb790c6-6d05-4456-aa1a-f970b422f742.pdf?160