HOW TO Fix Replace chevy shark fin OnStar antenna water leak Chevy GM GMC Cadillac
HTML-код
- Опубликовано: 3 окт 2024
- HOW TO Fix Replace high frequency chevy shark fin OnStar antenna water leak on a Chevy Tahoe. I have seen similar situations on Silverados and GMC trucks. (the ebay link says its compatible with 338 vehicles) check to make sure it works with your vehicle before ordering!
TOOLS NEEDED
Plastic Pry Tool
Socket Wrench
-8mm Socket
-10mm Socket
T 10 bit
Manufacture: New
Color: Black
Year fitment: Models:
2015-2018 Cadillac Escalade
2015-2018 Chevrolet Silverado
2015-2018 Chevrolet Suburban
2015-2018 Chevrolet Tahoe
2015-2018 GMC Sierra
2015-2018 GMC Yukon
EBAY LINK
ASM-HIGH FREQUENCY ECCN=5A991 *BLACK
www.ebay.com/i...
Update!!! My order came in like 3 days! Super fast shipping! I got it installed in about an hour. But HUGE piece of advice. The screw, metal clip, bracket...DO FIT IN THE HOLE...All you have to do is (clean the surface obviously) and the antenna with the screw, bracket, everything goes in the hole. All you have to do is tighten the screw down from the inside to get it snug! This will save anybody who tries to do this a huge amount to time and effort (and tore up arms and fingers trying to assemble the bracket/screw under the ceiling. So. Recap.
Keep the antenna as it ships. Completely assembled.
Pull the old one like you did in the video.
Feed the wires and plug it in like you did. BUT keep the antenna 100% assembled (DO NOT TAKE THE SCREW OUT) it'll all fit in the hole and mount to the roof and just tighten the screw! That's it!
Thank you though for the video and also the link to purchase the part! Cheers mate! 🍻
Glad it worked out! Thanks for the tips!!!
Steve thanks for the tip.i been trying to tighten mine but it looks like it's just tightening on the bolt..the hole looks messed up since mine was backed into the garage door..I will try again to see if will work
@@segbachan5123 not sure if there is damage to the home you feed it into. But the main thing is to hold it from up top and make sure it is pressed all the way in before you start tightening it. It's a small lip that starts expanding out that makes it snug. So don't screw it down a lot if it's not snuggling down right away. It doesn't take much screwing in. If it isn't snuggling down right away the lip didn't catch the under side of your roof. Stop screwing and smash the bracket back together as best you can and try again. Again. It doesn't take a lot of turns of the screw. So make sure the antenna is pressed all the way in and the lip of the bracket is catching the under side of the roof. Good luck mate!
Thank you for the video. I just did this antennae replacement.... easier than I thought. Took about 30 mins. Everything works perfectly now.
Nice! Glad it all worked out! 💪
Thanks for your video post you saved me as well as others $400 from the dealership with your simple and easy instructional video Appreciate you posting this.
No problem! Hope you get it all back and working properly. This has got to be the worst designed part ever smh. So many people have had issues with this part. I will say that I purchased a 2022 Tahoe and they still use this antenna but it appears to have the gasket hole on the bottom now as it should. Hopefully that will help prevent this issue going forward. It happened to me on this video in only a short time of owning it. Horrible part! 💪
Great video. I watched it, ordered the antenna from amazon. 80 bucks. Took me about an hour to install. Probably wouldn't have attempted without this instructional video. Thanks.
Thanks and no problem! I’m glad it was helpful and you were able to get it fixed. Now for GM to get it fixed! 💪
Which one from Amazon? Got the link?
great DYI video. had my suburban into the dealer for a few things and asked them to check why my GPS wasn't working. they stated that the antenna needed to be replaced. they quoted me a price of $300.00, yes, $300.00. bought an OEM shark fin on Amazon, with shipping cost me $80.00. watched your tutorial and had it replaced in no time. thanks for sharing this.
No problem, glad it was helpful and I appreciate the comment! Yea it sucks it seems like they all end up failing. I saw someone say their local dealer was charging them $5-600!
I just replaced my shark fin yesterday. 2016 GMC Yukon L Denali.
just left my local dealer today and they wanted $847. (part, labor, tax included). I’m gonna give this a go at home! thanks for the video!!
@jamesspurr5735 no problem! Yea, definitely worth doing yourself. Good luck, let us know how it goes! 💪
My wife has a 2017 tahoe and I got a 2020 gmc sierra and mine has the slit in front, hers in the back part...I told her idk why they didn't think that through lol. Her tahoe started leaking today with the heavy rain. Great video man!! Helped find the problem alot faster than I would've on my own 🤘🏼
I bought an antenna from the dealership on an employee discount, but was still $175. But this video helped and fixed my nav system calibration if you’re having that issue. I’m in MI but my Yukon thought I was in SC.
Nice, glad you got it figured out! 💪
Thank you so much! Just did this on a 2016 Suburban out of warranty a long time ago. Bad on Chevy for not addressing this issue the right way. You saved us a lot of headache & $.
No problem and I’m glad to hear it was helpful! Yea apparently this part goes bad all the time. It’s a shame. Take care and be safe!
Bad on Chevy is right! Very sadly disappointed to learn that this and many other water leak issues have been problems for decades now. About to do this in my 04 Suburban.
100%. Feels like it was designed to fail or something smh. Good luck with your suburban! 💪
@@Jsean, yes it does!
@@sweetnlow97 Shame isn’t it??! 💪
Just replaced mine today! Thanks for the awesome video. Gave me the confidence to do it myself!
Glad to hear! No problem I’m the same way. Sometimes I need to see it done first. I always end up messing stuff up on the first try so a walk through like this makes it a lot easier to do. I’m glad it worked out for you. Mine is still working great!
Thanks bro. I watched 3 other videos on this subject and they sucked compared to yours. I referenced every step with your video and I as able to avoid the little mistakes you made and it went fast. The only hard part is getting that A pillar off. Much appreciated.
No problem, I’m glad it was helpful and worked out for you! 💪
Thanks bro!!! It’s annoying knowing that A LOT of people have this problem.
Pete Moore no problem! Yea it definitely seems like a part that was designed to fail. Hope you get yours back to working as it should.
Great video. Followed each step and boom. Haven’t been able to use my SiriusXM for a year. So much water came out. Thanks for the effort.
Thanks, I’m glad it was helpful and you got to it! Yea man these things suck. Horrible design. I have a 2022 Tahoe now. Same fin but they actually put the drain hole at the bottom now. Go figure. It only took them years to figure that out smh. 💪
This video saved me a trip to the dealer, thanks so much for posting. Replaced shark fin on GMC Yukon Denali in about an hour, ordered part for $18.
No problem, glad it worked out! Horrible how a lot of people have this part go bad smh
Did you use aftermarket or where did you get it
I used an aftermarket. It used to be cheaper though. I contacted the seller and they stated they are authentic but the price went up so I’m not sure. You would have to verify this with them though as I am in no way affiliated with them. Not 100% sure of the actual reason but I know I helped them sell a lot of these since I made this video so I’m assuming that’s why the price went up a little. I put the link in the description of where I got mine on eBay. It is not an affiliate link or anything like that. I just wanted to help others out. I hope it works out for you!
18$ where?
Thanks for this video! Even though my truck is older (2011) I was mostly worried about the roof liner removal to get to the stupid antenna bolt. Not worried now after watching how easy it was!
Matthew Anderson no problem. Good luck and glad it was still helpful!
Great Video man! I had to pay 68 for my antenna because I need silver, still..I got it put in 30 mins and saved myself over 500!
Thanks and glad to hear! Yea luckily I needed black to begin with. The factory part is ridiculous but hey we both saved a ton of money. Stay Safe! 💪
Thanks for the video! The new antenna arrived with a slot in the rear like the original part. Thinking of plugging it with glue. I have a sunroof and a speaker behind the ceiling handle that has to be removed. Video was still accurate.
I'm glad you posted this video...! My xm radio reception has been very week lately..! Plus, now that I've looked into this, I realize now that this is the source of my occasional water leak, but I didn't realize it was coming from this antenna mount...!!!! (Long story) I was able to remove the old antenna with difficulty and ordered a replacement.
I"m not sure I have a complete plan to re-install the new antenna to prevent interior water leaks. I do intend to apply grease or Vaseline on the two rubber seals. I would like to plug the rear facing "water leak hole" with RTV sealant. I think this antenna unit should't need a leak hole. Comments..?
2006 Chevrolet Silverado ext cab 4 door, 2wd, Z71 suspension, posi-traction near axle, Michelins. Tows a 24 foot camper VERY good!!
No problem! I’m glad you figured out where your leak was coming from. Apparently it’s a common part that tends to fail quite often. That minor water leak can cause loads of costly damage. I honestly don’t know the purpose of that hole but on my new one it’s facing down so I don’t see a need to seal it but if yours is on the top side I don’t think that’s a bad idea at all. Good idea with the grease or Vaseline. Good luck with the install and I hope that it all goes well. Let us know how it worked out if you can 💪
This vid is spot on thanks man i had a water leak on driver side sunvisor area and replaced sharkfin on my 2015 tahoe Ltz in about 20mins super easy with ur video bro good looking out!
No problem, I’m glad it worked out! It’s crazy how this part seems to fail for a lot of people. That little part can end up causing a lot of potential damage. Happy new year 💪
@@Jsean for sure i initially thought it might be the sunroof and then came accross ur video which made perfect sence as to where my leak was so i ordered the fin on amazon yesterday installed it today.thanks once again and stay safe out there and happy new years to u!
LOVELY ENGINEERING. Thank you for the video.
I know right! 🤦♂️ no problem, I hope you get yours fixed up. 💪
Really appreciate your video, just replaced my shark fin on the Suburban. Works great. Your instructions were perfect.
No problem, glad it all worked out! Sad we have to even replace this part right! 💪
I came on here to find a video to remove the shark off a 2007 Suburban to repair rust. Then I see how he had water leak. I have a leak in my 2015 Yukon and I thought it was the sunroof. I just went out to see my gasket has a whole just like his. What a bunch of idiots at GM to put that on the wrong end. I guess I will be fixing my Yukon too now. Thank you for making me aware of this.
No problem, and your right what a horrible part. So many people have had the same issue. I hope you get your situation resolved. 💪
Thank you for the video. I have a 2016 Yukon SLT and the GPS and navigation were not working due to water damage. This video saved me $400 for DYI. I had difficulty reaching in to disconnect the yellow and red connectors. I ended up removing the passenger side sun visor and center console to reach them. Once you got the whole front panel detached, it was very easy to replace the new antenna.
No problem, I’m glad it worked out for you! Yea some of it is a bit tedious but it’s well worth the money saved! Man GM needs to upgrade this part as it definitely seems like a part that fails often.
Thanks so much for this video. Just replaced my in a hour. It does fix the issue where the map shows your location off. I know people had commented on if it fixed this. Before fixing mine it showed my vehicle in the Gulf of Mexico. Thanks again!
Dillon Clanton no problem! LoL well I’m glad your back up and running. It seems like this part was designed to fail 😞
A tip: you can watch movies on Flixzone. Been using it for watching lots of of movies during the lockdown.
@Jonah Travis Definitely, I've been using Flixzone for since december myself =)
@Jonah Travis Yup, I've been using flixzone for since december myself =)
You saved me about $700.... thanks!!!
Amy S no problem, glad it was helpful!
Thanks man...especially for the Ebay link! I need to replace mine as it's been leaking intermittently for the past year. Such an easy and cheap fix.
No problem, glad it was helpful and good luck! Super easy and cheap fix for sure. Stay safe out there!!! 💪
I really appreciate you!! Dude thanks so much for the video and only cost me $30 and 30 min of my time!!! Your video is spot on and you do a great job! Keep up the great videos and thanks again!!! Stay safe and healthy!
John Abramson No problem, glad it was helpful! Thanks and same to you! 💪
Where you find one for $30
Thanks for the video I have a 2017 1500 Silverado, I put some clear silicone in the gap probably meant to be the drain hole if so its backwards or just bad design anyway temporary fix. So from reading other posts about dealer pricing this part isnt under warranty cause I let the dealer where I got the truck from know about it they want me to bring it in if its not covered then ill just do it myself. Don't make sense that the hole is on the angled side allowing water to flow into it but it is so so thanks again for the tutorial. 👍👊
No problem, glad it was helpful. Yea it sucks I hope your silicone holds up. The design just doesn’t make sense to me and so many people end up having the same problem. Some were told by the dealer that it was $5-600 range to replace it. The bad part is when the water comes through and hits your headliner. You’ll end up messing up a lot more than that antenna. Good luck with everything and nice truck. 💪
I just did this install today on my 2016 Yukon. Original antenna was waterlogged. XM signal is back to normal. Will see how long it lasts. Thanks for this video.
Glad it worked out for you! Mine is still going strong!
Thanks for the video. It helped out a lot with replacing my antenna.
No problem, glad it was helpful! 💪
Yea just wrapped up this project. Mine is a 2019 Surburban Premier it has an extra fiber or Coax…. So this is the last American 🇺🇸 Made Car I will Own!!!! 90,000.00 bucks and they can kept the fn thing for leaking ummmmm makes sense why the torque converter is going out and on a good day it knocks terrible but on a cold day I wonder how many miles till the pin falls out of the Grenade I have a 2002 Honda Accord I just blew up last year at like 325,000. Not one problem with that (fuel pimp at 90,000) 80.00 back in biz. Not one maintenance issue. This fn thing it’s a mystery every time I turn the key!!!!! Good job UAW!!!! Good Job!!!!
Good looking bro. I'm about to do this for my boy tomorrow and I figured I'd have to pull the whole headliner. Crew car wash store his off.
No problem. Oh wow, Good luck! 👍
Great video! I changed mine a few months ago when I replaced the headliner.
If your antenna still works fine but you are getting water take it off . Silicone the inside gasket around that bolt . You will see it . it is square and then put the bolt back on. Then lightly silicone the shark fin around the bogger outside gasket and silicone that little square hole in the back! That is what allows water to get in! I did this and it worked perfect and I have gotten a lot of rain! DRY
Why not just silicone around the outside of the whole thing? wouldnt that stop water from getting in? Why bother taking it apart and doing the inside ?
I wondered the same thing
Thanks dude made my fix super easy.
No problem, glad it was helpful and you got it all worked out! Sucks that this seems to go bad for so many people 💪
Thanks for the video! I’ll definitely be doing this to my 2015 Yukon.
William Hawkins no problem, It’s definitely worth fixing it yourself. Good luck!
@@Jsean why nobody at GM has gone "hey u know what? We have this gasket on backwards" is beyond me.
Removed the shark fin from my ‘14 Silverado, and it was full of stagnant water! Could never understand why there would be an entry point for water, but no exit!
@@rokrok60 exactly, makes no sense! It’s like they designed it to fail. I’m glad you were able get it off and now it can be replaced before it causes other areas of trouble. 💪
Great video great job explaining made it super simple bud right on
Thanks and I hope you get yours back up and running! 💪
Thanks for the video man, my antenna has been leaking in my 15 Sierra 2500HD Denali, unfortunately it's ruined my headliner and possibly my carpets at this point so I have the interior of my truck gutted right now, wish I would have fixed this awhile ago.
Ah man that sucks. Yea this seems to be a faulty part. I’ve heard some people have your issue and that’s unfortunate. Fortunate for me mine didn’t get that far. It wasn’t on the video but when I took mine apart it was rusted and dripping with water all inside so I’m glad I got to mine when I did. If I didn’t I’m sure mine would have ended up worse. Did you notice any signs before the leaking? Good luck with getting your truck back on track!
@@Jsean it's back together now. First things I noticed was the musty smell and then I had water dripping from the driver side sun visor. I installed a new shark fin antenna along with some silicone for good measure. I then cleared the sunroof drains and applied silicone to the rear cab vents which were also leaking. It's been raining the past couple days, I've been checking and no water in the cab so far so hopefully I got it fixed.
Glad to hear! Man it’s crazy because who knows how long it’s been going on for. This is why I NEED a garage! Well I’m glad it all worked out at the end. Stay safe!
Man I like your seats!! Factory or you had them done?! Man they are Clean!!
Thanks for the Video
Thanks and no problem! I hope the video was helpful. Yup, I had them done 👍
Thanks for showing! I just needed to know how to take off to wrap the roof. Thanks'
No problem! Good luck with the wrap. I paid to get my hood and “spoiler” area wrapped but unfortunately I took it off two days later. It didn’t come out the way I imagined smh 🤦♂️ it ended up being a total waste of money.
Jsean ahh that sucks
I wrap it myself coming out awesome
Thanks
GL to you
Stay safe!
Wish there was a way to remove the antenna without removing all the other pieces of trim. Is it an issue with slack ?
It’s been awhile now since I did it so I can’t remember now but if there was a better way to do it that I could tell I’m sure I would have mentioned it. It’s not hard to do though. Especially if you can see how it’s done or at least follow someone like me doing it instead of doing it from scratch. I hope that helps and you are able to get it done. Once it’s done it’s something you shouldn’t have to deal with for awhile but if yours has a problem you want to address it as the next step for people is usually water reaching the headliner which will cause a bigger headache. 💪
Your link doesnt work any more but great write up. Thanks!
That particular seller may have sold out. Thank you though! Hope you get your situation fixed! 💪
Awesome vid
Thank you I appreciate that. Hope it was helpful! 💪
Great video. I need to ask about the hole in front. When its raining and the wipers are on wouldn't the water come up over the windshield and on the roof and find its way in that hole?
Nah I highly doubt that. I just got a 2022 Tahoe and it has the same antenna but with the hole facing the bottom now too. Definitely made no sense at all being at the top smh. You should be good 👍 💪
Very Good Video SEAN
mine just Started to LEAK 2017 Tahoe
Thanks for the comment! Man it really doesn’t make any sense right! It’s almost like the part was designed to fail. I’m glad it was helpful and I hope you get yours back to normal soon. When I took mine apart I had so much water inside smh. It happens so often that they should definitely update the design. Good luck with everything! 💪
@@Jsean I Wish GM Would have Placed in the BACK NOT the Front Just where the CURVE of the Roof STARTS !!!!
EVEN the HOLE Placement was RETARDED
WTF
mine is ALL BLACK with 6 Spoke 22" Rims
Added AMBER Fog Lights
Too Many Little BUGS !!!
SMH I agree. Especially with the hole placement. Makes no sense at all. Plus the dealership charges way too much to fix this known issue. Nice set up! Mines all blacked out too with 6 spokes but my wheels are matte black 26’s. I also have the yellow fogs. One thing I added that I don’t see in my area is the “glow tie”. A little pricey in my opinion but it ties right into your factory set up. I think it looks nice. Other Tahoe owners stop me a lot and ask about it not knowing that it’s an official GM part/upgrade. If you haven’t already try out the Chevy all weather mats too. They work great as they cover everything from spills etc.
@@Jsean Yes mine came with the All Weather Mats - Yellow Chevy Bow Tie , + I painted my Calipers RED . i find the 22" Rides HARSH , Prefere the 20" on my Winter RIMS RIDES SOFTER
@@jonienglish3231 i feel like my factory 20’s ride the same and always thought those even felt a little harsh for some reason but you definitely have to be careful riding over bumps with larger wheels and skinnier tires etc. I had my calipers painted red too but I hated how it looked behind my factory chrome 20’s whenever i switched the wheels back. I had brushed 6 stars in the same wheel before i bought the matte black ones. I originally wanted gloss but they were out of stock but I sort of like it now. It adds a little bit of contrast to the gloss black Tahoe and I never have to add tire shine since it sort of all blends together now. I ended up making my calipers back to silver and then recently went to black calipers. I added some drilled/slotted rotors so I wanted them to contrast off of them since those are bright silver behind the black wheels. My factory rotors are way darker behind the wheel than these new rotors.
Thank you for posting this!!
Angelica V no problem, glad it was helpful!
Well my Suburban has CAL where the compass reading was and my navigation and GPS are dead so looks like I’m doing this as soon as I get the part. 🙏🏼 Hope this works.
Yup, sounds like it will fix it. Good luck with everything. Stop back by if you can to let us know how it works out! 💪
Great vid champ
Thanks, I appreciate the comment! I hope you get your issue squared away if your having similar issues. 💪
I got a recommendation to buy the sealant on Amazon. Should I buy it?
I think that may help but if you can get the antenna for a good price I’d just replace it because I think they designed these things to fail. When I replaced it the gasket had an opening on the end that made sense for water to drain out unlike the one I replaced. Hope that helps 💪
@@JseanThanks. I appreciate you!
@@WhereisChristina your welcome and good luck! Thanks for stopping by. I appreciate you too! 💪
Very good video.well ✅ dun thanks 👍 was helpful.thanks
Thanks and no problem. GM really needs to get this part fixed smh. Too many people with the same issues. Hope you get your stuff situated. Good luck with everything! 💪
Just ordered mine!
Good luck! Let me know how it works out for you!
Update!!! My order came in like 3 days! Super fast shipping! I got it installed in about an hour. But HUGE piece of advice. The screw, metal clip, bracket...DO FIT IN THE HOLE...All you have to do is (clean the surface obviously) and the antenna with the screw, bracket, everything goes in the hole. All you have to do is tighten the screw down from the inside to get it snug! This will save anybody who tries to do this a huge amount to time and effort (and tore up arms and fingers trying to assemble the bracket/screw under the ceiling. So. Recap.
Keep the antenna as it ships. Completely assembled.
Pull the old one like you did in the video.
Feed the wires and plug it in like you did. BUT keep the antenna 100% assembled (DO NOT TAKE THE SCREW OUT) it'll all fit in the hole and mount to the roof and just tighten the screw! That's it!
Thank you though for the video and also the link to purchase the part! Cheers mate! 🍻
Thanks man for the video it’s a good mine is messing up
No problem, good luck!
I feel like GMC messed up the factory install instructions for all those - that weep hole should be at the bottom, crazzy.
Agreed! Feel like maybe they did it so they would keep needing to be replaced or something because it makes no sense at all. 💪
Thanks for the vid... mine leaks water into the cab 15 GMC sierra denali 3500... i hope this will fix my problem🤞
No problem and thanks for stopping by. I hope it fixes your problem too. Some had the issue like mine while others had it worse like yours where it leaked into the cab. Man that sucks. This is a serious design flaw that seems like it was meant to fail. It reminds me of some Toyota’s. They last forever but in short periods of time you will start noticing little things fall apart or break. Good luck with your install/fix!
Jsean yep, that was definitely it!! Mine was leaking water into the cab from the inner seal of the shark fin. My navi still worked and my screws weren’t corroded, so I don’t think i need a new fin atm. I used some flexshot and put it back together. Hopefully that will work. Thank you for the video. It helped a lot 👍🙏
Jsean yep, that was definitely it!! Mine was leaking water into the cab from the inner seal of the shark fin. My navi still worked and my screws weren’t corroded, so I don’t think i need a new fin atm. I used some flexshot and put it back together. Hopefully that will work. Thank you for the video. It helped a lot 👍🙏
My question is, with the opening in the gasket to the front of the vehicle, wouldnt you get water in while driving in the rain? Wouldnt it be best to not have an opening in the gasket? I have a little water dripping from where the visor mounts on the drivers side, Im going to just put clear silicone all the way around the antenna and see if that stops it. My XM and Onstar is still functional. I see no need in having an opening in the gasket no matter what side.
Honestly, I don’t understand the design at all lol but based on me and many others issues it seems if there had to be a gasket opening for whatever the reason it shouldn’t be on the side the factory makes it. I imagine that like any other gasket it will start to lose its seal due to weather. Gets stiff from the cold and maybe loses its shape from the heat and after awhile the seal isn’t as tight and then water can eventually make its way in. As far as the seal being on the bottom, I’m assuming while driving the force is so great that water wouldn’t really go into that tiny hole in the gasket and if it did it would naturally work itself out by it being on the bottom. If on top the water could easily get into it especially if your vehicle was parked in a storm etc. if I remember correctly the gasket may have had channels or something inside so it wasn’t simply a hole that went strait through. Don’t quote me on that though. I believe if your antenna is still functional but water leaked through it would only be a matter of time before the antenna stopped working as water is finding its way through your gasket. If you seal it as you say I’m assuming that would work too as long as you didn’t mind having silicone around it. Just make sure you wipe around the edges clean so the silicone will adhere properly. Good luck and I hope it works out for you! Worst case scenario you at least know the culprit if the silicone doesn’t hold up. Just be careful, the last thing we all want is water coming inside. That can lead to so many other problems. Hope that was helpful!
I'm experiencing the same issue as you Bryant, and thinking of doing just that. did it work for you? thanks.
@@Jsean great video brother, i appreciate the info.
Will replacing my antenna help with my GPS? It’s not working….but my Sirius XM does.🤷🏻♀️
Yes, My gps kept acting up when it got damaged. I can’t believe how easily this part has failed with many of us. Good luck with everything. Hope you get it fixed soon! 💪 🙂
Sweet, THANK YOU!!!! Will be replacing it asap then. Thanks for the video!!
@@fefelein no problem! If you can stop back by and let us know how it worked out.
For sure. I’ll keep you posted!!
Good morning does it calibrate by itself the one that supposed to show you north and west and whatever because I replace that antenna yesterday As far as yesterday it was still not showing me where in North was
Depending on where i am parked it wont seem like its calibrated until I start driving. Once i drove off it calibrated. Take a drive and see what happens. If it starts working then you should be good going forward. Hope that helps and if you can let me know what happens. 💪
Great Job thanks!
Thanks and no problem! Hope you are able to get yours back to how it should be! 💪
Can you opt out of a shark fin antenna when ordering a custom truck
Thank you brotha
No problem, hope it was helpful! 💪
@@Jsean super helpful
@@anthonysaldana2350 that’s great, I hope you get your situation resolved! 💪
What years your tahoe are those factory seats
I can’t remember now if it was a 2016 or 2018 but those are the same body years. As far as the seats I had those installed and I installed the carbon fiber steering wheel and painted some of the dash interior to try and match better. Hope that helps. 💪
@Jsean I want set of those they look so nice
@thegman4759 appreciate that. No worries, you’ll get yours! 💪
Is this antenna also part of the xm radio or just onstar. My onstar on my 14 Silverado is fine but no xm. I got like a cheap magnet 10$ xm antenna and plug it to the transmitter behind the radio display and it works fine. Gotta find an alternative than having a wire hanging out on the side of my truck . Thanks for any help
I believe it’s for satellite radio, GPS and Onstar. Not sure if this is true but I even read somewhere that it reads the tire pressure??? Nice hack but I agree the wire hanging out the side needs an upgrade lol. Hope you get it all resolved! If you can let us know how it goes 💪
how do the plugs come apart? just pull them or is there a tab to lift or press
Thank you for help
Thanks for the video 👍🏽 ..did youre mic stp working too?
No problem! At the time of my issue my mic still worked.
Mine was really loose i always end up with my seat wet when it rains hard or at a car wash. Im lazy so i just put clear caulk all around it today. I did what i fo to exterior light fixtures on mobile homes we put clear caulk on those and it works well hopefully it works on this truck too lol
Lol, yea I saw a few do the same and it worked out well. That sucks man because if enough gets in there it can mess a bunch of other stuff up. It’s horrible how this part has failed so many people.
@@Jsean if this was the only thing that had failed on this truck id be so fkn happy lol this is the third time ive had a stuck lifter on this 09 chevy silverado its expensive af to get it fixed and the trucks not worth it anymore. I started doing it myself then i realized if i just replace the bad lifter itll do it again so i need to do a dod delete even replacing the camshaft which i dong feel comfortable doing so its been sitting with a 80% disassembled engine for months now i think it might have gotten rusty cause its not in a garage so now i think i have to replace the entire engine. Also its had low oil pressure problems. When the mechanic was replacing the oil pump he said it looked like the oil pump had been replaced before lol fkn garbage truck. My cousins son bought a chevy silverado too and it also broke down from a stuck lifter
lol man you got a lot on your hands! I hope you don’t have to get a new engine. That would suck. If it gets that bad you might be aiming for a new vehicle all together. Fingers crossed everything works all out in your favor!
@@Jsean thanks i think im going to put a used engine in it with alot less miles and im going to have someone delete the dod from at the computer
@@juniorpineda4151 no problem. Sounds cool, if you can let me know how it goes! Hope it all works out for you 💪
Lately I noticed that my On-star come back online and I had free Sirius Xm. I also noticed that my GPS all of the sudden had my home address programed in it something that I never do. Even after erasing the data and double checking that the entire history was wiped out my address again showed up on my navigation, and I am beginning to be concern since during the last few months I have noticed a particular vehicle following my SUV. I checked for trackers but did not find anything so I am wondering if On-star was hacked if that is even possible. Evidently I want to disable the On-star Feature. Is this something that can be achieve by removing a fuse or do I need to disable the module ? If so is this module located being the CUE or glove box ? Do I need to open the module and disconnect anything inside or just unplug it ? What features will be lost ? It is a 2016 Cadillac Escalade Platinum. Thanks Oli
Hi I saw the video and is very clean. I order one but I have a question. I need to update the gps?
Hello, glad to hear. Let me know how it all works out for you! I just installed it and everything was working as it should. No programming needed as far as I’m aware of. Good luck 👍
Thanks bro
Omar Hernandez no problem!
Thanks for the video! I ordered one of these and will do it this weekend. However, it looks like in 2015 there was a 2015, and a 2015.5 model Suburban. The antenna you used is bigger and painted to match (2015.5 I believe). Do you think this will still replace the smaller non matching antenna on my 2015?
Will this fix also the satellite radio reception also.
I was told that it all ties in together. GPS satellite radio etc. don’t quote me on that but that’s what I have read. Someone else has asked me that before on here and I believe it also fixed their issue. Hope that helps and good luck! 👍
Anyone know the pinout on the antenna connectors which is xm which is GPS ?
I heard that if you add two of the shark fins that you pick up crazy speed!!
Lol, yea I believe it adds an extra 100 HP. 😂
I have the same problem. Could i put silicon around the fin on top of roof instead?
I think that would technically work. Just use some clear silicon so it doesn’t look noticeable. This part definitely needs to be updated. Too many of us are having the same issues! Good luck with everything 💪
@@Jsean so true.. I was at a gas station 3 years ago and some random guy came over and asked if it was leaking water yet? I said no and he said they all leak, give it some time
@@TrumpDesantis-zm3kg smh that’s sad right! It’s like certain parts are just designed to fail. The dealer charges $500-600 to repair this too. My vehicle was practically new at the time and I had this issue.
thanks brother - Im going to go check mine thumbs up where did you buy them for $20 bucks
No problem. I have a non affiliate link in the description. Hope everything works out for you!
Very good brother-Tx a lot!But i have problem whit search this part.Can help me to search “name” or “number” parts.I have SIERRA SLT-2015 years.Tx a lot agen👏🏽👏🏽👏🏽I m from Bulgaria
No problem and what’s up from the States! Many of these vary well may be the same but if I were you I’d call your local dealership and talk to the parts department. They will ask you for your vin number to verify it is indeed the correct part for your exact vehicle. If your antenna looks like mine then simply let them know you are looking for the part number for the “shark fin” antenna after they run your vin. From there just type that part number in eBay or the I internet and purchase only from a trusted place or seller and I’m sure it will save you some money than buying it from the dealer. The way you will save the most is by installing it yourself though. Good luck, I hope you get your part and get things fixed. Happy holidays and if you can let us know how it goes! Hope that helped 💪
@@Jsean Tx a lot mate,but here in Bulgaria we dont have a diler GMC:(I order parts only from ebay and some another…now after 4 oure:(((i put only silicon,this day only raining and the job is bad for my truck…i put silicon for now.After this,i f…..the microphone:(Today for me and my love(sierra) is bad day.
@@КирилГеоргиев-г9г ah man sorry to hear that! This part is horrible. It has failed many people. The only other way is if you have the ability to remove the part and look underneath it should be labeled. The issue is you would have to put it back together until your part comes in. Only other way I can think of is having to make a long distance call to any dealership in the US and ask them by letting them know the make, model and year. Idk it sucks and I hope your able to fix it soon. It caused some people a bit of water damage. If you are able to remove it and clean it and then add the silicon that may be a better temporary solution. Plus if you do that you will be able to take a good look at the part to see what the part number it’s off the vehicle. 💪
How do you unpinch the red and yellow connectors
Will I need to buy a new cover antenna for my Kia Optima? It came off when I went to the car wash.
Krystle Torres oh no that sucks! I’m not sure but for this vehicle the antenna came with the cover. I don’t know if they would sell your cover separately. I would try to find out the part number and put that info in ebay or somewhere else to see what pops up. You can call a Kia dealer service department and let them know your vehicle year, make, model etc and tell them which part and they should be able to give you an exact part number. While your talking to them ask how much it cost and then reference what you can find online yourself as I imagine it would be a lot cheaper. Hope that helps.
is this for calibration also?
It will recalibrate on its own as soon as it receives a signal. Hope that helps!
Did your leak on the healdliner? My driver front carpet always gets wet but no stains in headliner or A pillar
Luckily mine didn’t but I did read where others had that problem. Yea that’s strange if it’s not wet above. Is it wet anywhere near your door at all? I know some people get the carpet wet from AC leaks but usually that’s on the passenger side. Are you having any issues with your gps etc?
@@Jsean mine gets wet sitting. At first i thoughg it was the matts and water from the boat ramp but i shampood the catepets and dried them, it rained one night and carpet wet. Cannot really see where its coming. from
Yea that’s crazy. I hope you get it sorted out. Ever try shooting a hose over your vehicle while someone sits inside to see if it leaks? Sounds weird but next time it rains maybe lay some paper down everywhere to see if you can catch where it’s dripping from?
Part # is saying it won’t fit my 2015 Chevy Silverado High Country. Any thoughts on that?
If it says it doesn’t fit I wouldn’t take a chance. You could send the seller a direct message and ask if he has one that fits the 2015 Silverado or find the part number through your local dealership and then search for it on eBay. It’s a little extra work but better taste than sorry. Besides being a different part number I’d imagine the way you install it should be the same or generally the same. Hope that helps and good luck with the install. If you can let us know how it worked out!
Good stuff for replacing a unit, but mine was ripped off so the hole and base area is uneven.when I place the New unit on there's a gap to the front and back.. plus when i try to tighten the 10 mm nut from below the whole thing goes through the roof.
Anyone have this issue I'm thinking about working up a larger washer from the inside so I might be able to tighten the nut from the insde and pull down on the base unit..
Any thoughts my vehicle is a 2012 Buick enclave
Ah man sorry to hear that. I hope it works out for you. I wish these manufacturers would stop putting low quality parts in these vehicles. I can’t see exactly what it looks like but did you ever figure a way around this or at least a temporary solution? I hope someone in the comments can better assist you. Good luck and happy New Years 💪
I just used black rtv on mine
suggestion disconnect the battery, and wait over an hour, the capacitor for the airbag should have died by then.
Hey man did water leak in your cab by your visor where it swivels? That's what mine doing and I thought it was weird about that hole in the back !
Fortunately for me mine didn’t. The device itself is what leaked with my situation. Yea that hole in the back makes no sense at all. It’s like it was designed to fail! Good luck with your situation though!
@@Jsean I took it off and i siliconed around the gasket that seals it and siliconed that little hole. So we will see next time it rains! Thanks man
No problem, hope that did the trick for you! Nothing like worrying about having your car/truck leak after every rain shower!
@@Jsean so far its good . It worked! Need to silicone the inside gasket and the outside a little bit . block off that little hole so it can not get in!
Does the radio need to be re-programmed after the antenna is replaced. Dealer is telling me I need to have the radio re-programmed as well.
After I switched it out it was just all back to working for me. Idk maybe the dealer was trying to discourage you. I’m not saying you won’t have to but I’ve never heard of that and I didn’t have to do that. Good luck! Let us know how that goes if you get around to it!
Does XM use this same shark fin or is that a different antenna? XM
Don’t take this as 100% but as far as I know and read from some others it is the same antenna.
Can This Cause Radio to Short out? Mine Went Out Blinking Finally Radio Shorted Out!
It’s possible. I’ve heard it can mess up the radio and gps. Check the lining to see if you notice any water stains etc.
Yes!!!! I lost my signal my xm stopped working and it shows my car being in Mississippi and I live in Tennessee. 3 months later the leak has started in the car. I have a warranty and gmc won’t fix it.
@@Amythrash10 smh isn’t this rediculous? It’s obviously a faulty part or overall design. I hope you get it taken care of. Luckily you caught it before real water damage was done. The dealership wants an arm and leg to do it but you can save a lot by doing it yourself. When I took mine apart tons of water came out before I even caught it on the video. Mine is still working great. Good luck 👍
@@Amythrash10 it's Taken Several Different People Contractor's By Dealership..Because Dealerships Just Don't Have Capabilites Or Trained Employees. Sadly The Old School Have RETIRED. BUT SEVERAL RECALLS ON CHEVY TRUCKS. 🤬
Does this fix navigation issue? My Tahoe GPS shows I’m currently driving in the middle of the Gulf of Mexico (which we know isn’t true). Also, will XM radio still work? Thanks for the video.
Corey Long LoL that’s horrible. Well, based on what I saw for others and my situation it helped with radio issues, gps and water leaking into the actual cabin. I recently noticed the light was red on my rear view so one day I hit the OnStar button and customer service ran a diagnostic. They told me it was the antenna not working properly for whatever the reason and to take it to my dealer. Upon further research the part itself wasn’t too high in cost but the dealer will most likely still charge for a diagnostic, part and install so the price jumps up pretty quick. I tried to see if it was covered as a faulty part but the dealer said no. If possible I would recommend taking yours off and inspecting it. What you see here is after I cleaned it. It was corrosion everywhere and way more water and junk pouring out of it just a few days before this footage you saw. I unscrewed it all the way and looked at the board and it had a few burn marks so I knew it was the antenna for sure in my situation. My Tahoe is only a few years old so I was surprised at how bad the condition was. This one I happen to run across on eBay is a great price and shipped from Texas. If you have a different color cover you may be able to take off your old one but I’m not 100% sure as I didn’t end up having to switch covers. I hope that helps. If you can let me know what ends up happening!
@@Jsean do you have a link to the replacement antenna you used?
Shelton Family hello, it should be in the description. Good luck! 👍
Worked for me! thanks so much
Lifesaver
Glad it was helpful! 💪
Seems like the gasket is on backwards, should have the relief portion to the front
That’s exactly what I said. It’s almost like it was designed to fail. As is it makes no sense at all. The replacement I used in the video has it right. Go figure. Good luck on getting yours back up and running. I have had mine replaced since the date of this video and everything is still working great.
Nice seats, kinda makes you think Chevrolet put the gasket on backwards.
Thanks and yes I agree! It’s like they designed it to fail smh 🤦♂️
@@Jsean Part of R&D is to make sure it doesn't last.
Definitely seems like it!
You skipped the part I was looking for. How to remove those wire plugs.!😂
Where did you find antenna that cheap??
Link
Links should be in the description or top comment. I haven’t checked since about a year ago but the price was still decent even though I believe they jacked it up after I sent them tons of business smh
@@erikdiaz2517 I just clicked the link and it didn’t show up so maybe it sold out now. I did see other sellers with similar prices though. Just typed it in eBay and look for a seller with respectable reviews
Thanks
@@erikdiaz2517 no problem I hope you end up finding a good deal. Good luck with everything! If you can, let me know how it goes if you end up changing it 💪
This will be my third antenna that has crapped out on me. Six months later has this chinese knockoff performed okay for you? If so I am ordering today.
Sorry for the delay. Yes mine is working well. I’d say go for it! I don’t know what they were thinking with this factory part but apparently it sucks 😔
@@Jsean it is installed and working
Where did you get the aftermarket antenna?
Joe Medina link is in the description. Hopefully it’s still available for you. Good luck!
if you take the gasket it off and turn it around so the hole is at the front, you dont have to buy a new one.
Mine was already rusted out smh. The new one had the gasket flipped around so the hole was at the bottom like you would expect it to be. Stupid original design if ask me. I will definitely take on your suggestion if I ever have to replace it again and the gaskets flipped around. Thanks for the comment! 💪
I have this problem on 2 weeks ago bought 2020 Sierra 1500 and now reading about people having this problem on older model cars is pathetic. Get your shit together GMC. People are paying $70K for your cars and you have parts dangling. Wow!
Meho Berkovic pretty ridiculous isn’t it!? That small part can cause loads of costly damage if not addressed. I’m not sure if I read your comment right but if you already have this problem thats crazy! If that’s the case I hope you get it all straightened out and can get back to enjoying your Sierra!
Jsean I discovered it by accident. The whole part looks little odd. It’s bulky and sticks out. I’m pretty tall fellow and I reached out yesterday and I almost pulled the whole thing out. I did hear little odd noise last week when I was driving on highway and I’m wondering if it actually was coming from that thing being loose. I will be taking it to dealership next week and let them fix it. It’s a new car. Unbelievable
Wow that’s crazy. Hope it gets sorted out. If it’s loose water can definitely get in there and cause other issues. Glad to hear they are taking care of it. If you can let us know how it works out. Be safe 💪
Mine leaked through to the visor hinge
Bobby Blair ah man that sucks. This is just a horrible design. I hope it didn’t mess up your vehicle too much!
You did a poor job on the video. Next time take the. Video and explain during editing. I get motion sickness over this… and you said you’ve done it ONCE already… dude sell the tools . You’re probably doing a second one because you messed this one up. Shit don’t quit your day job. Don’t talk you can text during the video put some Barney music whatever death metal and it’s easier to understand. You need to do the job post and leave your comments for pillow talk. K good talk dude
You act like you paid me to make this video specifically for you and you didn’t get what you paid for. If you didn’t like it then click off of it. It’s pretty simple. Suggestions are always welcome but the other stuff is unnecessary. My antenna is fixed at the end of the day. You could have used that energy to ask questions rather than to tell me how to produce a video. I hope you figure yours out. Thanks for all the kinds and encouraging words above 🙄 💪