very nice looking and very good tool. the gearbox seems to be in pristine condition even before the maintenance. fairly greased up and very well constructed.
Merci infiniment pour cette vidéo avec l'outil parkside vraiment sa fait des moi je cherche un démontage complet de cette perceuse et je ne trouve pas , la je suis tomber sur votre vidéo et merci vraiment encore bravo tout et correctement bien fait bravo et respect merci infiniment 🙏🙏
Hello Mustafa, You are doing a great job by sharing your videos, I really appreciate the channel ! I watched your video and wonder if you have some similar one on Parkside PBH 1100A drill hammer mainly on gear selector assembly/maintenance or link to share ? Thank you
Hello Brother, thank you for the great maintenance video! Would you suggest the 2017 model or the 2020 model ? Are the gears in the 2017 Model better ? Or is the 2020 model better overall ? Thank you and kind regards.
I followed every step but can get the selector knob to work. One time only drilled, reassembled, other time only hammered. Yet if I leave the knob off and move the mechanism with a screwdriver I can choose and get it working on every position. Seems like the knob is not doing what it is supposed to. Is there something I need to take into account when fitting the mechanism or the knob it self? Thank you in advance. Great Video!
@@kazimierzgrucki5274 unfortunately no. I found out a piece of metal stuck on the grease, it was a piece of the lever. I welded it and seemed to have worked but after a couple times it stopped working again. Probably it broke again, have not looked into it. But still, I think there is something we are doing wrong to make it fit and work properly.
Ok I've answered myself. It's in one piece with the transmission, plus it has a swinging part inside of it (which Mustafa didn't take apart) hitting directly on the bottom of the drill bit. Anyway I've managed to cut away the minced spindle and weld another one on the shaft. If it doesn't explode on me I'll report you how it went 😂
Hello Mustafa, when the existing drill bit is installed in the same drill, it rotates while the balances are changing. When you think there is a problem with the chuck, which part could be the problem?
I have this model with drill and drill with impact not working, it just slips Hammer is working ... what is the problem? I did disasembly it and there is no obvious damage, but i think gears got damaged because i got drill stuck during drilling and machine slipped
@@Mustafa.B Leaver is good functions change normally but when i lets say chose drill mode it doesent turn drill ... it will start to drill if i put force on the drill but it slips
@@Mustafa.B استاذ مصطفى اذا تكرمت اني شغلاتي وأسألتي ما تخلص اذا تتكرم وعندك وقت يتسع للجواب عندي كوسرة صغيرة ترتفع حماوتها الى درجة ما اكدر الزمها بيدي وكذا مرة فتحتها ونضفتها
@@محمدحالعراقي اسال اخي ولا تتردد ، حاول ان تفحص كمية الامبير التي تسحب الكوسرة وبعد ذلك حاول ان تتفخص الكويل احتمال اسلاكة من الالمنيوم ، وتاكد ايضا من حال البولبرن لان اذا مستهلك يؤدي الى تقليل سرعة الكوسرة وبالتالي تسخن بسرعة ، وكمية الكريز الموجودة في الدشالي اذا كمية كبيرة ايضا يؤدي الى تقليل السرعة .
Doesnt look much different from a Makita or Bosch machine. Apart from major quality differences obviously in the brush holder assembly, chuck, switch and handle. The gearbox is interesting since it actually appears to be fairly well sealed which is usually not done on cheap machines. But a Makita or Bosch has better seals and they usually use a different grease its very liquid and flows almost like oil. They do this so all components will stay coated with grease at all times and last very long. This type of grease is a low viscosity grease for sealed gearboxes and the viscosity in small hammerdrills is usually NGLI 0 and for large demolition hammers they use NGLI 00 and NGLI 000 because their gearboxes are very well sealed and are expected to be run for hours. The grease will flow around and lubricate everything. Some Bosch hammers use oil for the gearbox.
Thank you for your excellent video. I have the PARKSIDE Hammer drill( like yours) with a stuck bit drill. For removing the bit drill is it possible to use a method like this? ruclips.net/video/veCvbkgVb9I/видео.html Or to disassemble the Hammer drill like you did and remove the bit drill then? Can you please advise a solution? Thanks a lot
Hvala lepo ! Super pokazano profesionalno!
Najlepša hvala prijatelj moj
very nice looking and very good tool. the gearbox seems to be in pristine condition even before the maintenance. fairly greased up and very well constructed.
Thank you very much.
Perfect instrustions!!! Thank You!!!!
You're welcome!
مبدع بكل معنى الكلمة....جزاكم الله خيرا جزاء المحسنين
اشكرك اخي
Merci infiniment pour cette vidéo avec l'outil parkside vraiment sa fait des moi je cherche un démontage complet de cette perceuse et je ne trouve pas , la je suis tomber sur votre vidéo et merci vraiment encore bravo tout et correctement bien fait bravo et respect merci infiniment 🙏🙏
De rien mon ami .
جزاك الله خير الجزاء على هذا العمل المتقن استاذ مصطفى
اشكرك اخي العزيز
محتوى ممتع مفيد تعليمي الله يوفقك استاذ مصطفى❤❤❤
اشكرك اخي والله يوفق الجميع
Спасибо. Как всегда впечатляет ваш уровень мастерства.
Очень заинтересовало ваше приспособление для запрессовки подшипника. Хотелось бы на нее обзор.
Спасибо брат.Прибор давления шестерни очень простой и его можно сделать самому.
شكرا اخ مصطفى على هذا الفديو التوضيحي ياريت تعمل فيديوات على نوع البرشليز brushless drill وكذلك امباكت
اشكرك اخي
انشاء الله
Hello Mustafa,
You are doing a great job by sharing your videos, I really appreciate the channel !
I watched your video and wonder if you have some similar one on Parkside PBH 1100A drill hammer mainly on gear selector assembly/maintenance or link to share ? Thank you
Hello Brother, thank you for the great maintenance video! Would you suggest the 2017 model or the 2020 model ? Are the gears in the 2017 Model better ? Or is the 2020 model better overall ? Thank you and kind regards.
your welcome my friend .
Of course, the best is the older 2017 model.
I followed every step but can get the selector knob to work. One time only drilled, reassembled, other time only hammered. Yet if I leave the knob off and move the mechanism with a screwdriver I can choose and get it working on every position. Seems like the knob is not doing what it is supposed to. Is there something I need to take into account when fitting the mechanism or the knob it self? Thank you in advance. Great Video!
I noticed the same knob issue after assemby. Have you find solution how to properly assemby the knob after geabox maintenance?
@@kazimierzgrucki5274 unfortunately no. I found out a piece of metal stuck on the grease, it was a piece of the lever. I welded it and seemed to have worked but after a couple times it stopped working again. Probably it broke again, have not looked into it. But still, I think there is something we are doing wrong to make it fit and work properly.
مبدع استاذ مصطفى❤
اشكرك خوية حسوني الغالي
ألف رحمه على والديك والله فصخته وماعرف أشده وعل مقطع مالتك شديته
ووالديك الرحمة . وانا بالخدمة
عاشت ايدك استاذي دائما مبدع
اشكرك اخي العزيز والغالي
عاشت ايدك استاذ مصطفى مبدع
اشكرك اخي الوردة
أحسنت يامبدع على التفاصيل الدقيقة
اشكرك اخي
thank you this video is perfect
You're welcome my friend.
Very useful video. Thanks. I've got a question: is the spindle replaceable or is it machined in one piece with the main shaft?
Ok I've answered myself. It's in one piece with the transmission, plus it has a swinging part inside of it (which Mustafa didn't take apart) hitting directly on the bottom of the drill bit. Anyway I've managed to cut away the minced spindle and weld another one on the shaft. If it doesn't explode on me I'll report you how it went 😂
كم كنت محتاج لهذا الفيديو
انا في خدمتك اخي
Hello Mustafa, when the existing drill bit is installed in the same drill, it rotates while the balances are changing. When you think there is a problem with the chuck, which part could be the problem?
احسنت اخي الكريم
شكرا جزيلا اخي
عاشت ايدك أستاذ.
عندي موديل c3 اذا اريد اخليله كريز يصير افتح الدكمه مال السلكتر واضيف لو الا يتفصخ
اشكرك اخي
يفضل فتح علبة التروس حتى يتم تغطيتها بالكريز .
NICE🤩
Thanks .
السلام عليكم اخي العزيز
عندي نفس المزرف بالضبط استريتا من الباله بس بيه قدحة قوية من الفحمات مع العلم فتحتو شفت الفحمات جديدة و الكمتيتر هم نضيف
عليكم السلام
لايمكننا الحكم على سلامت الارميجر من الشكل
احتمال هناك دمج في الملفات او حرق بالكويل او ارتفاع قليل جدا بالكومتيتر
❤@@Mustafa.B
عاشت ايدك
اشكرك اخوية
I have this model with drill and drill with impact not working, it just slips
Hammer is working ...
what is the problem? I did disasembly it and there is no obvious damage, but i think gears got damaged because i got drill stuck during drilling and machine slipped
Try to check the change lever, it may not be in the right place .
@@Mustafa.B can you tell me on your video at what time is that part?
25.10@@donmarkon
@@Mustafa.B Leaver is good
functions change normally but when i lets say chose drill mode it doesent turn drill ... it will start to drill if i put force on the drill but it slips
@@donmarkon Can you send pictures of the gears to my Facebook account? Or Instagram account .
السلام عليكم يرحم والديك عندي يشتغل بس توقف الدوران بي شنو السبب
سلام عليكم ياهو الاحسن انحيكو لو بارك سايد؟
عليكم السلام / طبعا الانجيكو افضل
كل الشكر لجنابك استاذ
اشكرك اخي العزيز
الف رحمة على امك وابوك وياربي يوفقك واشوف هاي القناة متابعيها بالملايين
@@محمدحالعراقي ووالديك الرحمة اخوية . والله يحفظك .
@@Mustafa.B استاذ مصطفى اذا تكرمت اني شغلاتي وأسألتي ما تخلص اذا تتكرم وعندك وقت يتسع للجواب عندي كوسرة صغيرة ترتفع حماوتها الى درجة ما اكدر الزمها بيدي وكذا مرة فتحتها ونضفتها
@@محمدحالعراقي اسال اخي ولا تتردد ، حاول ان تفحص كمية الامبير التي تسحب الكوسرة وبعد ذلك حاول ان تتفخص الكويل احتمال اسلاكة من الالمنيوم ، وتاكد ايضا من حال البولبرن لان اذا مستهلك يؤدي الى تقليل سرعة الكوسرة وبالتالي تسخن بسرعة ، وكمية الكريز الموجودة في الدشالي اذا كمية كبيرة ايضا يؤدي الى تقليل السرعة .
¡¡ G R A C I A S !!
De nada mi amigo
شكرا
بخدمتك اخي العزيز
سلام عليكم
عندي دريل انجيكو شحن همر و فتح وشد و تثقيب
يكولون لا تستعمل الهمر ماله لان يتلف
صدك هاي المعلومة؟
عليكم السلام .
معلومات خاطئة . بعض الناس تجتهد من ذاتها بدون اساس علمي .
السلام عليكم عندي 1050 دريل يشتغل بس كامت الطوبه متفتر متعشق شنو السبب ارجو الرد
عليكم السلام
اما دكمة التحويل فالتة
او الدشالي مسحوكة
وغالبا هذا النوع ينسحك الدشلي مال الارميجر
حاول تفكك الجهاز وتشوف
فتحته مامسحوك الدشلي بس اكو دكمة التحويل اليط الي جواها ماجاي تضبط شلون اضبطهن @@Mustafa.B
@@Mustafa.B عندي الارميجه حاولت افصله عن الدشلي متنفصل اشلون احاول بيه بطريقه ناجحه
@@Mustafa.B اذا دشلي الارميجه يعني ذبه مو
Doesnt look much different from a Makita or Bosch machine.
Apart from major quality differences obviously in the brush holder assembly, chuck, switch and handle.
The gearbox is interesting since it actually appears to be fairly well sealed which is usually not done on cheap machines.
But a Makita or Bosch has better seals and they usually use a different grease its very liquid and flows almost like oil. They do this so all components will stay coated with grease at all times and last very long. This type of grease is a low viscosity grease for sealed gearboxes and the viscosity in small hammerdrills is usually NGLI 0 and for large demolition hammers they use NGLI 00 and NGLI 000 because their gearboxes are very well sealed and are expected to be run for hours. The grease will flow around and lubricate everything.
Some Bosch hammers use oil for the gearbox.
Thank you very much for your information .
عاشت الأيادي
انا في خدمتك اخي العزيز .
عاشت الايادي
صناعه هذه الشركه هل هي درجه اولى وكيف اعرف الموديل اى سنه
ليست درجة اولى , وطبعا لاحظت المنتجات القديمة افضل من الحديثة . مكتوب على الجهاز سنة الانتاج .
عمل صح وموفق..
شكرا جزيلا
هاي الي تحول للهمر وبرينه شلون يتركبن الي ينربط بل دكمة الحمرة
اخي انا وضحت ذلك في الفديو
رووووووووووعه
اشكرك اخي العزيز
اريد عنوانك اجيك اني من الكاظمية
راسلني على حساب الفيس بوك او الانستا
Pezzi di ricambio
Thank you for your excellent video.
I have the PARKSIDE Hammer drill( like yours) with a stuck bit drill.
For removing the bit drill is it possible to use a method like this?
ruclips.net/video/veCvbkgVb9I/видео.html
Or to disassemble the Hammer drill like you did and remove the bit drill then?
Can you please advise a solution?
Thanks a lot
your welcome my friend
You can use the method in this video because this is the only way to extract the drill bit .
Hi Mustafa. Great video! Where can i find the steel balls you removet at min 2:40? Which is the diameter?