Great job on the restoration. Congrats on owning a Tempest 👍. 16:47 Just a small suggestion for your gameplay here. You are at the worst location to get these red Flippers and you lose a lot of lives here. They just need 90 degrees of travel to get to you. If you are at the position next to it, they need to rotate 270 degrees (takes longer, as they have less momentum) to get you. Try to maximize that travel angle, so you have more time to shoot at it.
Looks great Charlie, love Tempest. My high score is just a little under yours, now I have to get back on my Tempest and beat your score. Thanks for the push, to beat your high score. Haha. :)
@@overtimearcade So what is your score? What are you saying you can't start using the upper level start? It's part of the game? why not? But do you have a score starting from level 1 would love to know what it is to try to beat that score.
I think for tournaments, they don't want you starting from any higher than level 9. The official Twin Galaxies tournament ruleset includes this: "Special Rules: You may start your game from from Wave 1 to no higher than Wave 9 [54K Completion Bonus]."
Love the cabaret form factor. Smaller size, weight vs the full uprights, plus Atari cabarets have the nice glass marquee below the cp. Also like the woodgrain sides. Easier and cheaper to maintain and restore or refinish. When machines are packed next to each other in home or commercial arcades like this, can't see the side art anyways
@@overtimearcade Also, plenty of curbside and thrift vintage desks, cabinets, bookshelves made of mdf, high density particle board or plywood with similar woodgrain made through the 80s, 90s Been stocking up on old Sauder desks, bookcases found curbside to use as stock for cabinet builds, some with 80s woodgrain, some black finish
I have owned an Atari Tempest cab since 1983. I recently replaced the failing game boards with a dedicated FPGA running Tempest. Plugs right into the existing harness. I can't tell any difference.
@@overtimearcade Real question is, what are the known deviations in behavior (sound, video, gameplay, feel, etc) using the current best software emulators to run Tempest roms vs original pcb hardware? If none are known, I'm inclined to just build a Temoest cocktail or cabaret replica cab running the rooms on emulation but with original controls or commercial grade spinner, buttons that feel and play the same as OG
You'll still need a 6100 color vector monitor for the true experience, which is likely the most expensive part of the entire ensemble. Plus, you could probably buy a non-working Tempest boardset and get it bullet-proofed by an expert for less than the FPGA emulation board costs.
Always enjoy your ramblings and enthusiasm for Arcades :)
Why thank you, sir! I'll keep on rambling then!
Great job on the restoration. Congrats on owning a Tempest 👍.
16:47 Just a small suggestion for your gameplay here. You are at the worst location to get these red Flippers and you lose a lot of lives here. They just need 90 degrees of travel to get to you. If you are at the position next to it, they need to rotate 270 degrees (takes longer, as they have less momentum) to get you. Try to maximize that travel angle, so you have more time to shoot at it.
Thanks, and I appreciate the tip -- I need all the help I can get!
I really enjoyed this video! Great job on this restoration.
Thanks! Not bad for a complete NOOB several years ago! 😅
A great game & I love the cabaret cab. Great work Charlie 👍
Thanks, Swainy! I do have a soft spot for cabarets!
Wow that sounds like a ton of work! It looks amazing
It sure was, but Tempest is worth it!
Looks great Charlie, love Tempest. My high score is just a little under yours, now I have to get back on my Tempest and beat your score. Thanks for the push, to beat your high score. Haha. :)
Thanks, Erik! My top high score doesn't count since I was continuing via the Skill Step advance!
@@overtimearcade So what is your score? What are you saying you can't start using the upper level start? It's part of the game? why not? But do you have a score starting from level 1 would love to know what it is to try to beat that score.
I think for tournaments, they don't want you starting from any higher than level 9. The official Twin Galaxies tournament ruleset includes this: "Special Rules: You may start your game from from Wave 1 to no higher than Wave 9 [54K Completion Bonus]."
Your Robotron and Tempest machines are 2 of my fav all time arcade games. I'm very jealous! lol
Thanks, they’re two of my favorites too! And I’m planning to restore the SECOND Robotron project cabinet hiding out in the back of my garage soon!
Love the cabaret form factor.
Smaller size, weight vs the full uprights, plus Atari cabarets have the nice glass marquee below the cp.
Also like the woodgrain sides. Easier and cheaper to maintain and restore or refinish. When machines are packed next to each other in home or commercial arcades like this, can't see the side art anyways
Yep, plus these cabinets still have a full size monitor.
I just wish someone would find a good match for the original woodgrain vinyl!
Exactly -- in fact, I don't think there was ever a 13" color vector monitor released in an arcade cabinet...?
@@overtimearcade Shouldn't be a big deal to scan the vintage woodgrain veneer and have a good print shop, graphics shop make vinyl appliques replicas
@@overtimearcade Also, plenty of curbside and thrift vintage desks, cabinets, bookshelves made of mdf, high density particle board or plywood with similar woodgrain made through the 80s, 90s
Been stocking up on old Sauder desks, bookcases found curbside to use as stock for cabinet builds, some with 80s woodgrain, some black finish
I have owned an Atari Tempest cab since 1983. I recently replaced the failing game boards with a dedicated FPGA running Tempest. Plugs right into the existing harness. I can't tell any difference.
@@nrnoble make, model, brand, link to the Tempest Fpga board?
Thanks
Interesting... is that the one by Scott Swazey as seen on John's Arcade?
You beat me to asking that! I'm wondering if it's this one: tempestfpga.com/tempestfpga/
@@overtimearcade Real question is, what are the known deviations in behavior (sound, video, gameplay, feel, etc) using the current best software emulators to run Tempest roms vs original pcb hardware?
If none are known, I'm inclined to just build a Temoest cocktail or cabaret replica cab running the rooms on emulation but with original controls or commercial grade spinner, buttons that feel and play the same as OG
You'll still need a 6100 color vector monitor for the true experience, which is likely the most expensive part of the entire ensemble. Plus, you could probably buy a non-working Tempest boardset and get it bullet-proofed by an expert for less than the FPGA emulation board costs.
Love tempest. I can't wait to find a good deal on one local
Good thing Atari made a ton of them. Avoid the cocktail version though, as they're apparently cursed!
Hey Charlie!!
HEY, JASON!!!
How rare is a Joust 2? What kind of price does it range?
Joust 2 is certainly very uncommon. Depending on condition, it should be in the $1500-$2500 ballpark. It's not a particularly GOOD game, however!
What are these forums you speak of?
Why the KLOV forums, of course! forums.arcade-museum.com/
Keep saving these! More games are disappearing and being destroyed everyday!
Just try and stop me! 😅