Thank you. So, mine is the Ron Fellows edition and embossed in the hash marks is the Canadian flag and information about Ron’s C6 American Le Mans championships. This is #300 of the 399 production run.
@@YourHomeGarage very cool edition! Never heard of the Ron Fellows Corvettes. I currently own a '18 Grand Sport and a '93 Corvette. A few folks here on the Tube have seen my repair videos.😉
What size are the auto dollies your purchased? The 12" or 16" width? I am looking for a set for my C6 as well. Thanks for this video, it was very helpful.
Do you think you could spin a car around with these? I wanted to move a car sideways in my garage? Thanks for the information, probably gonna scoop some up either way
You can spin a car 360 degrees on these. The casters swivel for easy movement. Though I wouldn’t recommend two people to help move the vehicle into position when there is a lot of movement involved.
To get it moving can be a bit tricky - especially if the wheels on the dolly aren’t lined up. It’s definitely a lot easier with two people, but one person can manage.
Thanks for the kind words - I just happen to be uploading a new video when your question popped up - so perfect timing since I was in front of the computer.
A non-starting vehicle is definitely an application as you can move it out of the way when you’re not working on it. Along with those that store a vehicle for a period of time and push it into a corner that is different to drive into.
What ! is it snowing in Alberta allready lol. I shouldn't laugh as I off the road as of Tuesday. , Was a very short season this year and we didn't get to meet up in Kelowna like we planed. Hope you folks are well. Cheers
Any idea if these will work on a rougher surface? I'm trying to move a project out of the way and under my awning so I can finish her without getting any more bylaw complaints...the ground is a little bumpier than concrete though as it's older asphalt.
@@YourHomeGarage Won't help in this case since I'm dealing with drivetrain issues leaving the front 2 wheels locked on an AWD car. (fixing the front driveline would be the "project" for this project car) If I had a way to allow the front to roll freely the bumpers covers are quick release so I could easily nudge it with my ATV but so far everything I've tried gets hung up because the castor wheels aren't up to the task
@@jacoblami1731 This might be a crazy thought! I just looked for steel sheets which Home Depot has in 2’x4’ lengths. With a few of these, you can place your car on the dolly’s, then roll each tire onto its own sheet. You’ll need two sheets for each tire so you can stagger from one sheet to the next. At least this allows you to move the car 4’ at a time before rolling onto a new sheet. This way the casters won’t get stuck on a rock or in a rut. Just trying to think of a creative way for your situation.
@@YourHomeGarage This is genius. Going to try it with a few huge sheets of plywood I already have lying around but same concept. Will let you know if it works out
Absolutely - roll a project car into the corner to be worked on in the future or a seasonal car pushed out of the way until the weather breaks. Whatever the reason, they are meant to be used for extended periods.
These dollys are worthless. The plastic wheels are too small. They should be large rubber wheels. Difficult to impossible to move a car even with the wheels in the direction of the push. Been there done that.
Those dollies are cheap garbage.. you have a 55k car and $100 dollies lol? The tires are way too wide for those skinny little dollies dude. Those bolts/nuts are jabbing right into the tire the whole winter. Not good for a 300+ tire.
I believe he will remove them and let the corvette rest on the tires, it’s just for the sake of this video that he finished with the car on them. It’s kinda obvious lol
@@gimptigger if that's the case I'd like to see how he removes the dollies with the car against the wall... Then puts them back on. That limited space is my concern.
Very handy I have that exact set and they work great.
That's a beautiful C6 Z06! Those Grand Sports hash marks almost threw my Corvette senses off for a second or two. 🙂
Thank you. So, mine is the Ron Fellows edition and embossed in the hash marks is the Canadian flag and information about Ron’s C6 American Le Mans championships. This is #300 of the 399 production run.
I just noticed your thumbnail, but I’m on my phone so it’s small. What year is your C7?
@@YourHomeGarage very cool edition! Never heard of the Ron Fellows Corvettes. I currently own a '18 Grand Sport and a '93 Corvette. A few folks here on the Tube have seen my repair videos.😉
Can you leave the car on the dolly’s? And if so what if you only put them in the back wheels?
Thank you
Amazing thanks sir❤
What size are the auto dollies your purchased? The 12" or 16" width? I am looking for a set for my C6 as well. Thanks for this video, it was very helpful.
It’s technically 15 3/4” wide - but rounded to 16 inches.
Why u wearing a mask in ur own garage with the door open?
Why are you questioning Pfscience? Everybody knows Lord Pfauci commands it.
😂
Everyone is not young, dumb and looking for an opportunity to be famous. They just want to share information 😮
Nice car
Do you think you could spin a car around with these? I wanted to move a car sideways in my garage? Thanks for the information, probably gonna scoop some up either way
You can spin a car 360 degrees on these. The casters swivel for easy movement. Though I wouldn’t recommend two people to help move the vehicle into position when there is a lot of movement involved.
@@YourHomeGarage Why would you not recommend two people? So you'd recommend 3 people then?
Sorry, that was a typo in my previous response - that should be “I would recommend two people” not “wouldn’t”.
Was it hard to push when it was on the dolly? I see you did it yourself but I’m not that strong 💪🏼
To get it moving can be a bit tricky - especially if the wheels on the dolly aren’t lined up. It’s definitely a lot easier with two people, but one person can manage.
@@YourHomeGarage thanks for prompt response! Great work ! I followed the link and checking it out now
Thanks for the kind words - I just happen to be uploading a new video when your question popped up - so perfect timing since I was in front of the computer.
Why didnt you just lift it in the center?
I'm guessing these come handy only if one is not able to reposition by starting the vehicle. Am I right?
A non-starting vehicle is definitely an application as you can move it out of the way when you’re not working on it. Along with those that store a vehicle for a period of time and push it into a corner that is different to drive into.
What ! is it snowing in Alberta allready lol. I shouldn't laugh as I off the road as of Tuesday. , Was a very short season this year and we didn't get to meet up in Kelowna like we planed. Hope you folks are well. Cheers
Rob Roy The snow is just around the corner. Even though it was sunny today - all the leaves have blown off the trees. All is well!
Any idea if these will work on a rougher surface? I'm trying to move a project out of the way and under my awning so I can finish her without getting any more bylaw complaints...the ground is a little bumpier than concrete though as it's older asphalt.
I wouldn’t recommend it for asphalt - I think it may sink depending on the temperature. Have you looked into renting a Automotive Power Pusher?
@@YourHomeGarage Won't help in this case since I'm dealing with drivetrain issues leaving the front 2 wheels locked on an AWD car.
(fixing the front driveline would be the "project" for this project car)
If I had a way to allow the front to roll freely the bumpers covers are quick release so I could easily nudge it with my ATV but so far everything I've tried gets hung up because the castor wheels aren't up to the task
@@jacoblami1731 This might be a crazy thought! I just looked for steel sheets which Home Depot has in 2’x4’ lengths. With a few of these, you can place your car on the dolly’s, then roll each tire onto its own sheet. You’ll need two sheets for each tire so you can stagger from one sheet to the next. At least this allows you to move the car 4’ at a time before rolling onto a new sheet. This way the casters won’t get stuck on a rock or in a rut. Just trying to think of a creative way for your situation.
@@YourHomeGarage This is genius. Going to try it with a few huge sheets of plywood I already have lying around but same concept.
Will let you know if it works out
Yes, please update me when you try it!
Can you leave your car on the dollys for extended period of time?
Absolutely - roll a project car into the corner to be worked on in the future or a seasonal car pushed out of the way until the weather breaks. Whatever the reason, they are meant to be used for extended periods.
pushing that hard means cheap dollies.....
These dollys are worthless. The plastic wheels are too small. They should be large rubber wheels. Difficult to impossible to move a car even with the wheels in the direction of the push. Been there done that.
Очень сложно. В России сделали проще: ruclips.net/video/bMdqg7qYBL4/видео.html
Those dollies are cheap garbage.. you have a 55k car and $100 dollies lol? The tires are way too wide for those skinny little dollies dude. Those bolts/nuts are jabbing right into the tire the whole winter. Not good for a 300+ tire.
I believe he will remove them and let the corvette rest on the tires, it’s just for the sake of this video that he finished with the car on them. It’s kinda obvious lol
@@gimptigger if that's the case I'd like to see how he removes the dollies with the car against the wall... Then puts them back on. That limited space is my concern.
@@BiG__Disgruntled easy by using the front and rear jack points of the vehicle
Exactly I try to move my Chrysler 300c it didn’t work