Vertical Drawer for Spray Can / DIY

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • There are a wide variety of products available in the form of spray cans.
    Not only paint and lacquer, but also glue, sticker remover, various oils and lubricants,
    There are dozens of things I use in the shape of a spray can. However, there was no room to store these sprays.
    This work is a vertical drawer that stores spray cans.
    With two compartments in the drawer, 16 spray cans can be stored in one drawer.
    Even if it's not necessarily a spray can, we can store a lot of bonds and bottles that we use a lot while working.
    In particular, the front of the drawer was made special by taking a fireprint stamp of my logo.
    I think it's an essential drawer for you, too. Please refer to my video and try making it.
    Thank you.
    #DIY #Spray #Drawer #SprayCan

Комментарии • 45

  • @Kynosys_
    @Kynosys_  10 месяцев назад +4

    There are a wide variety of products available in the form of spray cans.
    Not only paint and lacquer, but also glue, sticker remover, various oils and lubricants,
    There are dozens of things I use in the shape of a spray can. However, there was no room to store these sprays.
    This work is a vertical drawer that stores spray cans.
    With two compartments in the drawer, 16 spray cans can be stored in one drawer.
    Even if it's not necessarily a spray can, we can store a lot of bonds and bottles that we use a lot while working.
    In particular, the front of the drawer was made special by taking a fireprint stamp of my logo.
    I think it's an essential drawer for you, too. Please refer to my video and try making it.
    Thank you.

  • @williamdoyle649
    @williamdoyle649 10 месяцев назад +3

    Who has this much room?Very imaginative.

    • @Kynosys_
      @Kynosys_  10 месяцев назад +2

      I believe my workplace should be a strong fortress that will be with me for a long time. Even though the space of the workplace is not that large, a lot of research is being done to increase the density of the workplace. I hope my video serves as a little clue when decorating your workplace. I would like to express my sincere gratitude for your kind words.

  • @mtiger8
    @mtiger8 7 месяцев назад +2

    The truth is that you are creative
    Thank you, I enjoyed watching

    • @Kynosys_
      @Kynosys_  7 месяцев назад +1

      Passion seems to resonate with everyone. I would like to express my deepest gratitude.

  • @patbird9694
    @patbird9694 6 месяцев назад +1

    Awesome workshop setup.

    • @Kynosys_
      @Kynosys_  6 месяцев назад

      I am trying to create a workshop that can be used for a long time. I want to use all the parts and materials I've collected. Thank you for your kind words.

  • @JJ-oq7tm
    @JJ-oq7tm 10 месяцев назад +1

    What a fantastic idea. I’m sooooo jealous of your work area. Love watching your genius at work…. Keep e’m coming.

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      I believe my workplace should be a strong fortress that will be with me for a long time. Even though the space of the workplace is not that large, a lot of research is being done to increase the density of the workplace. I hope my video serves as a little clue when decorating your workplace. I would like to express my sincere gratitude for your kind words.

  • @boomerbobable
    @boomerbobable 10 месяцев назад

    Your videos have filled up my to do lists for the next 5 years! Great ideas,.

    • @Kynosys_
      @Kynosys_  10 месяцев назад +1

      I believe my workplace should be a strong fortress that will be with me for a long time. Even though the space of the workplace is not that large, a lot of research is being done to increase the density of the workplace. I hope my video serves as a little clue when decorating your workplace. You will have a very nice workshop. I will support you. I would like to express my sincere gratitude for your kind words.

  • @sarahacostagarcia823
    @sarahacostagarcia823 9 месяцев назад +1

    Amazing !! 💜
    Thanks for sharing
    Greetings from México

    • @Kynosys_
      @Kynosys_  9 месяцев назад

      Nice to meet you. It's a great feeling that my video, which I worked so hard to create, can serve as a small reference to someone. Thank you for your kind words.

  • @jimrosson6702
    @jimrosson6702 10 месяцев назад +1

    Wow what an amazing idea.it turned out great never thought about doing paint can or other can storage like this great job. Can’t wait to see what you do with the storage behind the cabinets.

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thank you for always showing interest in my videos. There are quite a lot of tools and parts collected over 10 years of running a small factory. Even though it's been a few years since I started RUclips, I still have a hard time organizing and storing them. It looks like I will be making storage works for the time being. The hidden drawer in the back will also be uploaded soon. thank you

  • @manuelaguiarbetancor2693
    @manuelaguiarbetancor2693 10 месяцев назад +1

    Como siempre un trabajo fantastico
    🇮🇨

  • @PedroAlves-ee8vk
    @PedroAlves-ee8vk 10 месяцев назад +1

    Hello, very good job 😍 😍, Salutations de Suisse 🇨🇭 et à bientôt 👍 😊 😊

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thanks always, for your interest!

  • @라이트하게-o9y
    @라이트하게-o9y 10 месяцев назад +1

    멋지게 완성하셨네요~~~^^ 잘보고 갑니다~

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      만들고 나면, 한개만 만들걸 하는 생각이 들때가 있습니다. 만들때는 꽤나 힘들거든요.
      하지만, 완성하고 나면 그 위용에 힘들었던걸 잊어버립니다. 그리고 또 대작을 기획합니다.
      제 작품을 즐기고 응원해주시는 분들 덕분에도 또 새로운 시도를 할수 있는거 같습니다.
      좋은 말씀 감사드립니다.

  • @MASI_forging
    @MASI_forging 10 месяцев назад +1

    wow Brilliant 👏👏

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thanks for your praise!!!

  • @Makerperpassione
    @Makerperpassione 10 месяцев назад +1

    Very very good!!!! By!!

    • @Kynosys_
      @Kynosys_  10 месяцев назад +1

      Thanks for your interest!!!

  • @UncleFjester
    @UncleFjester 7 месяцев назад +2

    Every Graffiti Tagger is watching this

    • @Kynosys_
      @Kynosys_  7 месяцев назад

      I created my own special pattern. I would like to express my gratitude.

  • @eniltonmachado5900
    @eniltonmachado5900 4 месяца назад +1

    Parabéns. Perfeito

    • @Kynosys_
      @Kynosys_  4 месяца назад

      Thanks for your kind words!!!

  • @wernerpfeifer
    @wernerpfeifer 10 месяцев назад +1

    Grandios!

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thanks for your praise!!!

  • @mapuzooutpost
    @mapuzooutpost 10 месяцев назад +1

    Hi there, I was wondering if you've considered making plans for the various projects you share on your channel? Really love your work and would love to build some of your projects at some point!

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thank you for your interest in my work. When I create a piece, I usually make it from a sloppy blueprint. However, since many people want it, I am drawing 3D blueprints using reverse engineering. It may take some time, but I am uploading the videos one by one, so please check my channel.

  • @ygkim8203
    @ygkim8203 10 месяцев назад +1

    오늘도 저의 기대를 충족시키는 고퀄리티의 작품 감상 잘하고 갑니다.
    서랍레일 양면테이프 쓰는건 전 생각도 못했는데 한 수 배웠습니다.
    감사합니다.
    P.S 우레탄 니스란 제품은 흔히 알고있는 니스와 같은 제품이 스프레이식으로 나오는건가요?

    • @Kynosys_
      @Kynosys_  10 месяцев назад +1

      즐겁게 즐기신거 같아. 감사를 전합니다.
      네, 우레탄 니스 스프레이인데요, 마르는데 시간이 좀 많이 걸립니다.
      일반 신너를 섞어서 쓰는 니스는 굉장히 빠르게 마르는데, 거기에 비하면 아주 많이 느립니다.
      참고하세요

  • @where_is_bob
    @where_is_bob 10 месяцев назад +1

    Hello, master of shop organization, I want to ask that why you hammer pin and brad nails after?

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Are you asking about hammering after putting in a pin with a tacker? Pins alone do not completely seal the wood. You need to hammer it to get the two pieces of wood to stick together enough for the glue to pop out. Also, the pin gets stuck deeper. thank you

  • @Sam-wf4tr
    @Sam-wf4tr 10 месяцев назад +1

    😮👏👏👏

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      Thanks 🫡🫡🫡

  • @jcoul1sc
    @jcoul1sc 10 месяцев назад +1

    Nice but the spanners / wrench handle is too much, on 1 or 3 drawer it would be great to look at. You put a false front on, the handle should have been built into that IMHO.
    I need these too

    • @Kynosys_
      @Kynosys_  9 месяцев назад

      I think you're making the exact point. This is something I always hear from people around me. Just make one. However, I have a habit of increasing the quantity as I make it, which is hard on my body. Even one is good for video. I will be making several because I will be using it over and over again. In Korea, there is an idiom that says, “Hands are big.” It means that when making something, you make more than necessary. I'm also Korean, so I guess I follow tradition. thank you

  • @Srbrx
    @Srbrx 10 месяцев назад +1

    😍

    • @Kynosys_
      @Kynosys_  10 месяцев назад +1

      Thanks 🫡🫡

  • @PeterNetped
    @PeterNetped 10 месяцев назад +1

    Very good, labeling is still missing where what

    • @Kynosys_
      @Kynosys_  10 месяцев назад

      You noticed. Without labeling, it's not easy to find what you're looking for. I plan to label the contents as soon as they are properly organized. thank you!