This video is so helpful! I was going to try and raise up the MB body away from the chassis to clear the steering column. Now I see your much easier way to remove the column forward thru the firewall (and eventually take the tub off of the chassis). So glad I watched this video. Thank you Scott!
I like how you did this with no curse words or difficulty. I, on the other hand, used every curse word word in the book and busted all five knuckles and smooshed a finger. Thanks for the video. I had a hell of a time with the steering wheel and the brake pedal. Bought a 15 piece bearing puller at harbor freight for the steering wheel pull.
the last chance I was lucky on this one. The steering wheel is always a pain in the ... fill in the blank🤭 Soak with penetrating oil, heat, patience. When all else fails...sawzall😃😃😃 I’m only kidding😉
So I run a NAPA and am in the middle of tearing down a 47 CJ2A. Watch your videos daily now. Needed a wrench to fit my oil drain plug and in browsing the catalog today, came across a drag link socket made by Carlyle! I 'collect' tools and wanted this, even though your socket worked perfect. If anyone would like one thats purpose made like me, SDL3822 is the NAPA part number. Thanks again for making these great videos!!!
I can tell you from experience that it NEVER comes apart that easily if it’s been on for years and left to the weather prepare your self for a load of knuckle bustin and heavy cursin!😆🤪
Are the exhaust and intake manifold Required to be removed to remove the steering box and steering column as in your video? I noticed that the exhaust pipe has been detached from the exhaust manifold.... Thanks John
Bnas tardes sus videos son muy buenos y ayudan mucho pero queria pedirles un favor si fuese posible traducirlos al español aca en colombia tiene muchos seguidores mil gracias
![Chino Pacas - Smith (ft. Junior H & Fuerza Regida) [Video Visualizador Oficial]](http://i.ytimg.com/vi/BVK6k56X30Y/mqdefault.jpg)
These are helping me along soooo much. Thank you Scott
This video is so helpful! I was going to try and raise up the MB body away from the chassis to clear the steering column. Now I see your much easier way to remove the column forward thru the firewall (and eventually take the tub off of the chassis). So glad I watched this video. Thank you Scott!
I like how you did this with no curse words or difficulty. I, on the other hand, used every curse word word in the book and busted all five knuckles and smooshed a finger. Thanks for the video. I had a hell of a time with the steering wheel and the brake pedal.
Bought a 15 piece bearing puller at harbor freight for the steering wheel pull.
the last chance I was lucky on this one. The steering wheel is always a pain in the ... fill in the blank🤭
Soak with penetrating oil, heat, patience. When all else fails...sawzall😃😃😃
I’m only kidding😉
So I run a NAPA and am in the middle of tearing down a 47 CJ2A. Watch your videos daily now. Needed a wrench to fit my oil drain plug and in browsing the catalog today, came across a drag link socket made by Carlyle!
I 'collect' tools and wanted this, even though your socket worked perfect. If anyone would like one thats purpose made like me, SDL3822 is the NAPA part number. Thanks again for making these great videos!!!
Thank you Water Dog. We will👍
Watching from Philippines.....stay safe 😷😁👍👏
Good intell on that steering wheel.... I appreciate it
Very important pieces 👍👍👍👍
Great videos, Scott!
Thank You Jeff👍
I can tell you from experience that it NEVER comes apart that easily if it’s been on for years and left to the weather prepare your self for a load of knuckle bustin and heavy cursin!😆🤪
A trick: you can watch movies on flixzone. Me and my gf have been using it for watching all kinds of movies these days.
@Brandon Augustus Yea, I've been watching on flixzone for years myself :)
Are the exhaust and intake manifold Required to be removed to remove the steering box and steering column as in your video? I noticed that the exhaust pipe has been detached from the exhaust manifold.... Thanks John
No, it is possible to take The Who unit out without removing the manifolds.👍
What bolt is not in the frame at the top of the "V" formed by the bolts for the box top two steering box screws and then a blank hole in the middle ?
Not exactly sure what you’re asking Frank. I have a vid in this series installing the steering box with the master cylinder and shield.
PM me 👍
Great I am taking my Ross steering gear off tomorrow, to rebuild it
Great video thanx
Akiss Paraskevopoulos why thank you my friend 👍
would a large flathead screwdriver work to remove
the piece that you are removing with your speciality tool?
M. Loy Yes, I have done it that way as well.
Bnas tardes sus videos son muy buenos y ayudan mucho pero queria pedirles un favor si fuese posible traducirlos al español aca en colombia tiene muchos seguidores mil gracias
when putting any old jeep back together i coat everything with copper never sieze i call it anti-cuss compound in a can!
Can you export the vehicle to india
steering box oil reference please
Do You now why caind of oil use this steering box