Hi, nice job! Could you give a number of that optional metal plate with two bolts to put the second blade on spindle? Does it come with that second blade as well?
Hi, thank you very much. I don't understand the question, the translator translated it for me a little confused :-) The bearings on the shafts need to be replaced from time to time. I recently changed them again after two years. I no longer lubricate the bearings with Vaseline, I found out that it is necessary to replace the bearings after 2-3 seasons and the lubrication interval will not be delayed.
@@hrouda7 So all the work you made in this video is actually useless, right? One just have to change the bearings from time to time? You can't recommend to do an upgrade you showed in this video? p.s. My question was about the second blades in your cutting deck. I know it's an option(did not come installed on a tractor) but can't find the part number. Can you help me with that?
@@Stantube1000 The video shows mainly the replacement of bearings, for the sake of interest I kept one shaft with a lubricator and the other without. I found that the bearing life is similar. I mow in difficult conditions, so even branded bearings will last me only 3 years of operation. The knives on the left and on the right are different, I will send a link where you can see www.retezylevne.cz/sada-nozu-traktoru-husqvarna-se-zaberem-92-cm
To je lepidlo na zajištění šroubů, futra na ložiska jsou hodně volný, takže by se mohlo stát že když je ložisko už trochu přidřený tak by se mohlo začít točit ve futru nebo na hřídeli. Poradil mi to opravář zeměď. strojů.
Hi, nice job! Could you give a number of that optional metal plate with two bolts to put the second blade on spindle? Does it come with that second blade as well?
Hi, thank you very much. I don't understand the question, the translator translated it for me a little confused :-) The bearings on the shafts need to be replaced from time to time. I recently changed them again after two years. I no longer lubricate the bearings with Vaseline, I found out that it is necessary to replace the bearings after 2-3 seasons and the lubrication interval will not be delayed.
@@hrouda7 So all the work you made in this video is actually useless, right? One just have to change the bearings from time to time? You can't recommend to do an upgrade you showed in this video?
p.s. My question was about the second blades in your cutting deck. I know it's an option(did not come installed on a tractor) but can't find the part number. Can you help me with that?
@@Stantube1000 The video shows mainly the replacement of bearings, for the sake of interest I kept one shaft with a lubricator and the other without. I found that the bearing life is similar. I mow in difficult conditions, so even branded bearings will last me only 3 years of operation. The knives on the left and on the right are different, I will send a link where you can see www.retezylevne.cz/sada-nozu-traktoru-husqvarna-se-zaberem-92-cm
@@hrouda7 Many thanks for all info, all clear now. :)
@@Stantube1000 You're welcome. I'm glad I was able to share my experience and help a little :-)
Pls, co je to za modrou látku, co dáváte na hřídel k ložiskům?
To je lepidlo na zajištění šroubů, futra na ložiska jsou hodně volný, takže by se mohlo stát že když je ložisko už trochu přidřený tak by se mohlo začít točit ve futru nebo na hřídeli. Poradil mi to opravář zeměď. strojů.