Always impressed with his 'painter', whoever it is... but, if the bodywork is done that well, you sure would want someone at the same level of expertise doing the painting too! As usual, phenomenal results. 👍👍
The paint shop "sells" the entire job; I remember the early '80s GM "Waterborne Acrylic Enamel" experiment, "single stage paint that couldn't stick to the electrocoated sealer". One GMC/Chevy light blue metallic with 19 "CMP" (closest match possible/paint the whole side) variants... Ditzler couldn't even hit the color, and no Factory Pack RM/DuPont lacquer for trimming out. Suntron matched Toyotas and Datsuns every damn time.
I'm in so many facebook car groups, and it's funny to me now, how people part out their cars for far far less damage. And here's Arthur, who brings back cars that are impossibly mangled beyond recognition.. Insane craft and skills!
because it is Lithuania, not America. most of the cars Arthur shows are import from America (the car in the video also), u throw it away, but we repair and drive for another 30 years.
@@RivieraByBuick oh but I'm not even from the USA. In europe it is also a very common practice to part cars for nearly no damage. BTW, I thought Artur is from Russia.
It sounds more 80's in my opinion but regardless it goes well with the video. Not like the other videos you get where it's high pitched and ear pulsating 😂.
Да хватит, резаный лонжерон не имеет и половины прочности от целого заводского, поверь мне не дай бог на таком конструкторе попасть в дтп. Но соглашусь что для гаражника уровень хороший, факт
Dear Arthur, I wish you were here in europe or have a store and could maybe also repair my car. I drive a 2006 Audi A4 B7 1.6 petrol engine. When I bought my car a year ago it was in a very desolate condition, the engine was partly broken and also the doors were corroded by rust. I searched in laborious work the new parts to use them for my car. I replaced 3 of 4 doors in total and preserved them with rope grease, they are now all 100% rust-free. Also the front fenders were replaced. The car got a complete interior cleaning. It looks new from the outside and inside. This was a project which I started with my father and friends, without these people I would never have come so far. During a routine inspection I found rust on the rear wheel arches, no painter and no garage wants to repair it. I am deeply sad that it would fail because of this. I bet for you this is no problem at all. Your video with the VW bus showed perfectly: Everything is possible if you want. There is no "i can t fix it" thinking :) I wish you could fix mine, it just makes me so much sadder. All the best and take care
Точно такую работу делал недавно, провозился больше недели- не мог получить красивые зазоры. То с крышкой плохой зазор, то с дверью, с другими машинами таких проблем не было.
Качественная работа! Уверен что многие жестянщики обошлись бы без замены четверти, оттянули бы, отспоттерили бы... ну шпакли на крайняк кинули. Хотя по трудочасам не пойми что выгоднее бы вышло.
Watching Arthur snap a majority of the car's body panels on with clips, is it just me or are today's cars seeming more and more like the revell snap together car model kits we had as kids? (And being about as well made, too)
Just had someone ask if we were going to watch the Super Bowl on the behemoth screen in the office; I replied, "nah, it's Sunday, programming from Lithuania, and Canada where they'll be pounding dents out, and painting a 1960 Plymouth Fury".... and NO politics...
very impressive,I work in the bmw dealer shop ,CHina is facing virus attack,hope Arthur pay a little attention to it.take care!we didnot go back to work,afraid of being affected by someone.
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
Always impressed with his 'painter', whoever it is... but, if the bodywork is done that well, you sure would want someone at the same level of expertise doing the painting too! As usual, phenomenal results. 👍👍
Просто произведение искусства! Ставлю лайк и подписываюсь. Привет из Валенсии, Венесуэла👍
You are truly a wizard at repairs on anything!
Perfect work (as usual) but silver is a nightmare.
Like white, can't see your last pass, with the added pleasure of mottling...
All about the overlap and drop coat.
Absolutely correct, spot on,It's a shame the paint shop never gets any credit, A bad paint could ruin a good panel job. Well done to all!...
The paint shop "sells" the entire job; I remember the early '80s GM "Waterborne Acrylic Enamel" experiment, "single stage paint that couldn't stick to the electrocoated sealer". One GMC/Chevy light blue metallic with 19 "CMP" (closest match possible/paint the whole side) variants... Ditzler couldn't even hit the color, and no Factory Pack RM/DuPont lacquer for trimming out. Suntron matched Toyotas and Datsuns every damn time.
, and catch all of the "hell"; this message brought to you by the creators of "Synthetic Enamel blushing" and "universal retarder"...
Another amazing video Arthur. It still amazes me how everything lines up so perfectly. You are the best. 🙂
Всё-таки мне больше нравится, когда вы повторяете заводскую точку точечной сваркой)
I'm in so many facebook car groups, and it's funny to me now, how people part out their cars for far far less damage. And here's Arthur, who brings back cars that are impossibly mangled beyond recognition.. Insane craft and skills!
because it is Lithuania, not America. most of the cars Arthur shows are import from America (the car in the video also), u throw it away, but we repair and drive for another 30 years.
@@RivieraByBuick oh but I'm not even from the USA. In europe it is also a very common practice to part cars for nearly no damage. BTW, I thought Artur is from Russia.
@@SideKickStudios Arthur is russian but live in Lithuania.
1:38 loving the 90s office training video music.
You're the best Arthur!
It sounds more 80's in my opinion but regardless it goes well with the video. Not like the other videos you get where it's high pitched and ear pulsating 😂.
Your work is perfect! Shame there are not many people left who can do this kind of work as good as you can
Super work as always,your painter has got the seem sealer as good as factory,very very neat job
Another BMW brought back to life, Bravo 👏 as a BMW owner and lover I must thank you!!
The best body repairman in the world!
Good morning Arthur, as usual excellent metal work. It made a great BMW driver. Thanks and you take care.
Great job Arthur , as always your attention to detail is phenomenal, you build with such skill , every job is great , well done sir !👍👍🇬🇧🇬🇧🇬🇧🇬🇧❤️
Another great job. Arthur! Respect for your skills from the UK.
Quite enjoyed this video as it showcased a bit more of the R&I process and how much work there is in that.
Слов нет)))
Талант от Бога!?
Workmanship at its best
Once again, another Amazing feat of metal mastery!
Brilliant work nice clean finish. Professional.
Great work Arthur, thanks for sharing your expertise.
The man with the magical Hammer.
And of course we can't forget the spotter
Супер,герметик как на заводе разложили
Как всегда Артур красавчик учебное пособие.
Все как всегда на высоте! Мастер своего дела👌🏻💪🏻⚒
Хорошая работа!
Lovely job Arthur, nice finnish.
I admire your work dude. I would love to have someone like you in the neck of my woods....
Сегодня весь день смотрю ваши видео и под конец дня такой сюрприз 👍Артур спасибо Вам за ваше творчество 💪🙋♂️
Все как всегда очень красиво. Привет из Республики Беларусь 🇧🇾
Артур дай вам бог здоровья!)
Спасибо
Nice one, you really "de-constructed" the rear corner of that car. Impressive!
Great work Arthur always an excellent job
love watch a craftsman work, wish you lived in the uk.
Amazing Details in Your Work..
Привет из Макеевки!Очень качественная работа! Удачи Вам в работе , кепкого здоровья и мирного неба!
Pro Profi Как в Макеевке обстановка?
@@АлександрМороз-ъ8п Стабильно хреново!
Pro Profi Ясно, держитесь. Разьебите этих дебилов
Don't know how much money you make over there but in the UK you could make loads of money with these skills
Все боятся битые тачки покупать ! После Артура я б купил даже не парился
Да хватит, резаный лонжерон не имеет и половины прочности от целого заводского, поверь мне не дай бог на таком конструкторе попасть в дтп.
Но соглашусь что для гаражника уровень хороший, факт
@@АлександрМороз-б8ч если бита как в этом случае, то ничего страшного нет
Отличная работа! !!здоровья вам и успехов! !!👍👍👍
Dear Arthur,
I wish you were here in europe or have a store and could maybe also repair my car. I drive a 2006 Audi A4 B7 1.6 petrol engine.
When I bought my car a year ago it was in a very desolate condition, the engine was partly broken and also the doors were corroded by rust. I searched in laborious work the new parts to use them for my car.
I replaced 3 of 4 doors in total and preserved them with rope grease, they are now all 100% rust-free. Also the front fenders were replaced. The car got a complete interior cleaning. It looks new from the outside and inside. This was a project which I started with my father and friends, without these people I would never have come so far.
During a routine inspection I found rust on the rear wheel arches, no painter and no garage wants to repair it. I am deeply sad that it would fail because of this. I bet for you this is no problem at all. Your video with the VW bus showed perfectly: Everything is possible if you want. There is no "i can t fix it" thinking :)
I wish you could fix mine, it just makes me so much sadder.
All the best and take care
Another fantastic job Arthur.
A truly amazing transformation Arthur 👏I love your work 😍🙋♂️🇦🇺
😊👍
Super robota ,ty masz fach w ręku.
You are the best "Fachman"mechanic.
nie powiem ze nie
Красавчик 👍Интересно всегда смотреть !
Артур, волше́бник !
Nice job!
Greetings from Brazil
Great work as always. Why do people dislike? Keep up the amazing work.
Great job arthur. Thank you again for nice video. Good luck.
Bu adam oyle bir is cikartiyor ki, Tarcanlar Ekspertizden bile hatasiz boyasiz, islemsiz, rapor alir! Vesselam!
Приятно смотреть на работу профессионала! Сделано всё на высшем уровне🔥👍
Muy bien Arthur excelente trabajo saludos desde Honduras👌👌👌
Marco Medina Hola 👋
артур как всегда все достойно, успехов вам и долголетия!
Спасибо
That was awesome man ! All the way from México.
I’m a 2nd year apprentice panel beater in Oz, my tradesmen don’t teach me anything I learn more watching Arthur’s vids lol
Точно такую работу делал недавно, провозился больше недели- не мог получить красивые зазоры. То с крышкой плохой зазор, то с дверью, с другими машинами таких проблем не было.
From the U.S. over LT back to Germany. Of course "unfallfrei" 😂
I noticed the color difference in the video. You're gonna see it better irl. So if it is someone who is blind at this car for a price so be it.
Estos son desabolladores y pintores que aman su trabajo y se dedican a la pieza al 100% máster don Arthur. Saludos desde Chile.
Love that tune in the background!
Your talent and attention to detail is amazing as always.
Hope you can afford a heater for your shop one day. 😉
GPLIPP send him the money to purchase it so he’s not cold! ;)
He has radiators around the shop , but works so hard he is always warm 🇬🇧🇬🇧🇬🇧🇬🇧😎😂
@@mikeberry304 I can imagine he is warm from all that hard work! 🇬🇧
Excelente trabajo !!! saludos desde Santa Rosa Apodaca Nuevo Leon Mexico...
Артур, Ваши руки умеют всё👍
Отличная работа👍
Arthur the Master Auto Body Man !
Good job Art. If you mind me calling you that good sir.
Качественная работа! Уверен что многие жестянщики обошлись бы без замены четверти, оттянули бы, отспоттерили бы... ну шпакли на крайняк кинули. Хотя по трудочасам не пойми что выгоднее бы вышло.
Ни один вменяемый жестянщик не стал бы заниматься хернёй,имея необходимые детали для замены...😏
Как всегда, все на высоте 👍👍👍
Hey Arthur, Job Well Done ..... !
As always a great repair Arthur.
Вы очень крутой мастер
Insisto y siempre lo diré, eres un crack Arthur!!!! Muy bien...
Как всегда на высоте 👍👍👍
Вот это я понимаю мастер 👍👍👍👍
Good work...love BMW
Каждое видео как подарок
Как всегда хорошая работа !!!
Супер, спасибо за труды! Вопрос - было бы интересно посмотреть про нанесение герметика.
Вроде есть специальный пистолет для нанесения кузовного герметика
Ну или ручками или с помощью пистолета для нанесения антигравия и бумажного скотча
Good afternoon & greetings from Detroit Michigan. Love watching you work. 👍👍👍
Excelente trabajo caballete saludos desde Nicaragua
Hi, from Malta always watching you and make 💯% a great job keep it up👌
Как всегда шедеврально 👍👍👍👍
Me:This car are not repairable. i will sell this car in parts
Arthur: hold my beer.
your wrong if the back window broke you might have been right
Watching Arthur snap a majority of the car's body panels on with clips, is it just me or are today's cars seeming more and more like the revell snap together car model kits we had as kids? (And being about as well made, too)
Excelente trabajo Arthur
Bardzo dobra robota 👍
Superb work as always
Великолепно. Удачи.
Как всегда великолепно！
Amazing job like always!
Артур как всегда на высоте! Супер! Что-то давно небыло новых видео.....
Grate job teacher. I learned so much from you, thanks for post videos🙂
Another beautiful job
Сразу видно руку мастера.
Just had someone ask if we were going to watch the Super Bowl on the behemoth screen in the office; I replied, "nah, it's Sunday, programming from Lithuania, and Canada where they'll be pounding dents out, and painting a 1960 Plymouth Fury".... and NO politics...
Another good job Arthur
Привет из Москвы,Артур.
very impressive,I work in the bmw dealer shop ,CHina is facing virus attack,hope Arthur pay a little attention to it.take care!we didnot go back to work,afraid of being affected by someone.
Super jop Artor. But I think there is a different color between the bumper and finder you repaired.
Hi Arthur”...Damn nice work, as always
Looks like you borrow hammer from Thor 😂
De tanto ver tus vídeos, ya todo me parece muy fácil. Tienes que subir el listón Arthur 😀