How do I get the headphone jack of the SL 32r to work? I need a full crash course on routing for monitoring. Have you already done a video on it? I'd love to watch it, multiple times, plz. Thank you, brother.
Hi Joe, I love your videos, but have a question that I cannot seem to find the answer to. How can I run pipeline with studiolive series 3 mixer? Thank you, George
Hi Joe, great video and easy to follow. I have also seen the video about the cue mix in presonus studio one daw. please could you perhaps make make a video how you can connect the cue mix to the studiolive, I work with midi tracks and have the cue mix to the vocal booth but the pc is on one track and i would really like to know if the CUE functionality in DAW studion one can be fed through the mixer without compromising the midi mix . I do make the midi tracks into audio once they are finalized but this is sometimes after an acoustic guitar or the vocals are recorded. Thanks ever so much for the videos i often refer to them when i am stuck and they have helped me out on lot's of occasions. Dont ever stop :) Thanks ....from Tia -the Netherlands
Can you use same system for church language translation? Instead of giving headphones to musicians, give to congregants to listen, preaching another language?
I can't get this to work properly Are you feeding the headphone amp from the xlr aux outs? I'm trying to get different headphone mixes but they're all just the same levels
Could you show how to connect the cables on the back of the mixer to route each head phone setup? for example... i have an 8 channel headphone amp... how many wires and where should they be connected on the S/L III? (XLR to 1/4 inch?) and also, what needs to be turned on to enable the outputs on the back of the mixer to feed the correct output mix that you've explained in this video?
If i'm not mistaken, i'll need two separate cables for each headphone setup (left and right). I own the Presonus Studio live 32 which has 16 outputs, 13-16 are quarter inch and 1-12 are XLR... To route 8 separate headphones (stereo) I'll have to use all 1-16 outputs... right? not sure...
How do you set it up in stereo though? If I bring up the DAW in the stereo headphone mix, eg, channel 15 and 16 linked, the daw sends a stereo mix to BOTH 15 and 16. It doesn't send the left channel to 15 and the right channel to 16. How do I set it up to do this please?
Can you set up a in ears that switch automatically while you are selecting Mix 1, Mix 2 , Mix 3, Main and so on? I mean that hearing back on my in ears whatever mix I am selecting. Please and thank you !
great video. Really enjoy your videos. Can you maybe please do a video where you show how you hook up the mixer and configure it with your DAW to be able to play back through the mixer?
Hi Joe, great video. I have a studiolive 32 in the mixer room and a 16r in the live room and an earwax 16m in a sound booth (via ABV) I need 4 separate headphone mixers, can you help?
Hi Joe. Your videos are most informative. Keep it up. I have a presonus studiolive 32 series iii. Beautiful piece of equipment. I have a live show c9ming up in a couple of months that requires mixing a full orchestra with a band. We need 58 inputs. Question is, can we daisychain 2 studiolive 32s? I have read and seen 24s and 16s being cascaded but never 32s.
Hi Joe, firstly than you for sharing your knowledge on these desks. I have just purchased a studio live 16 series 3. This is my first ever digital desk and I'm struggling to get a level that is not hot. I tried to set up a vocal mic and I can't really get any decent volume on it before it goes into the red. I have connected the studio mixer up to EV ETX 12p's tops and ETV ETX 15'sp subs. My old analogue desk, my volume was very good, without having to turn up the speakers from 0 db' s. What am I doing wrong? Cheers Gerry
Thank you so much for these incredible ans excellent videos !!! Could you explain how to record a multi effects and cab simulator like Helix of line 6 thrue StudioLive III in order to have the effects and cab simulation in the Aux return for musicians but recording only the dry signal in studio One ? Pleeeaaase ? Thanks again
I have the SLiii 16 and have been blown away by its capabilities. I decided to unbox it with a chainsaw, which Presonus seemed to enjoy lol. I really enjoy your channel and greatly appreciate how information, yet direct you are. I’m really looking forward to your coming vlogs, as well. My question is: Have you found a way to record a vocal with the fx in the track OR track the dry vocal plus the fx on a second track at the same time? I’m not sure if routing fx to the DAW is possible while recording the track as well. Also, when routing analog via USB to the DAW, am I correct in seeing that the only gain/leveling option is the preamp gain or boosting a comp/EQ gain? I’d like a little bit more hotter signal than what I’m seeing now. Thanks a lot for your hard work. Take care!
Thank you for the reply. I'm making the transfer from analog over to digital, as far as mixing boards, and the SL3 was literally my only interest. I haven't been disappointed with it at all since I've received it and, although tedious, I'm enjoying the process of learning the flexibility within it. Your videos have been a welcome part of that journey. Thank you.
Been waiting for this video, Joe. Thank you so much. I'm new to using a mixer for recording, so the whole mix/headphone setup was a little confusing to me. Any headphone amps you would recommend? I really appreciate these videos and your help!
I like you joe. He puts himself out there in a very honest way. At least that is my opinion. I miss your pro tools videos though, joe. When you coming back to camp PT?
No matter what i do, the whole mix just comes through every aux, i cant seem to make different mixes with different levels. Even with the faders all down the main mix still comes through
Joe, Can you give vocalist verb in phones only and eq,comp. etc to daw? I have the 16.4.2 and wanted to be sure nothing has changed per the channel to daw button. Thanks,Harry
Joe, on your User layer, you only need to assign one of the stereo channels. The other will blindly follow. This saves space on your user layer and simplifies mixing stereo channels.
Hi Joe, First of all, great content, and very well explained, simply and useful. I wanna know, for example, after having being recording the drummer, if i want the guitarist to hear my drums record via the studiolive console ( i use the 16.4.2 ) using auxs,( and nor via the DAW) how can i do this ? i use a HP 60 as a headphone amp. Thanks for all your helps for us Cheers from France Kevin
If you're trying to play back tracks from your daw through the mixer, I vote don't bother. It's doable, but you have to route every track to a different USB output to do it. I don't think it's worth it.
Nice video! Could you explain how to set up a headphone mix using Protools (throught universal control)?
How do I get the headphone jack of the SL 32r to work? I need a full crash course on routing for monitoring. Have you already done a video on it? I'd love to watch it, multiple times, plz. Thank you, brother.
Hi Joe, I love your videos, but have a question that I cannot seem to find the answer to. How can I run pipeline with studiolive series 3 mixer? Thank you, George
Hi Joe, great video and easy to follow. I have also seen the video about the cue mix in presonus studio one daw. please could you perhaps make make a video how you can connect the cue mix to the studiolive, I work with midi tracks and have the cue mix to the vocal booth but the pc is on one track and i would really like to know if the CUE functionality in DAW studion one can be fed through the mixer without compromising the midi mix . I do make the midi tracks into audio once they are finalized but this is sometimes after an acoustic guitar or the vocals are recorded.
Thanks ever so much for the videos i often refer to them when i am stuck and they have helped me out on lot's of occasions. Dont ever stop :)
Thanks ....from Tia -the Netherlands
Can you use same system for church language translation? Instead of giving headphones to musicians, give to congregants to listen, preaching another language?
Joe nice video. How do you link 15 and 16 and make them stereo? I wanna send a stereo mix to a camera and need to send a mix to it. How do I do that?
I can't get this to work properly
Are you feeding the headphone amp from the xlr aux outs? I'm trying to get different headphone mixes but they're all just the same levels
Man how do you do this?? All i get is the full mix going through one fader in the aux mixes. I'm ready to lose it
Can I do headphones mixes using daw mode while not using the mixer as my interface?
Could you show how to connect the cables on the back of the mixer to route each head phone setup?
for example... i have an 8 channel headphone amp... how many wires and where should they be connected on the S/L III? (XLR to 1/4 inch?) and also, what needs to be turned on to enable the outputs on the back of the mixer to feed the correct output mix that you've explained in this video?
Totally depends on the headphone amp itself.
m1.com.pk/wp-content/uploads/2014/09/ha4700.1.gif
I'm using 2 HA4700 don't know if you can see the i/o's here
If i'm not mistaken, i'll need two separate cables for each headphone setup (left and right). I own the Presonus Studio live 32 which has 16 outputs, 13-16 are quarter inch and 1-12 are XLR... To route 8 separate headphones (stereo) I'll have to use all 1-16 outputs... right? not sure...
What a useful video, I'm getting familiar with all of these in good faith of getting a StudioLive soon! Thanks Joe, take care.
Great!!
How do you set it up in stereo though? If I bring up the DAW in the stereo headphone mix, eg, channel 15 and 16 linked, the daw sends a stereo mix to BOTH 15 and 16. It doesn't send the left channel to 15 and the right channel to 16. How do I set it up to do this please?
Can you set up a in ears that switch automatically while you are selecting Mix 1, Mix 2 , Mix 3, Main and so on? I mean that hearing back on my in ears whatever mix I am selecting. Please and thank you !
That’s what I am trying to figure out. I think if u did something with the matrix. Then it would have volume control of each out as well.
@@buddah2xx thanks for that bro, I am trying too
great video. Really enjoy your videos. Can you maybe please do a video where you show how you hook up the mixer and configure it with your DAW to be able to play back through the mixer?
What specifically do you want to know? You just plug it in via the USB cable, and it acts like an audio interface.
Hi Joe, great video. I have a studiolive 32 in the mixer room and a 16r in the live room and an earwax 16m in a sound booth (via ABV) I need 4 separate headphone mixers, can you help?
U should buy a analogue headphone amps and controll the mixes via wifi. More expensive options is the avb monitor mixers.
Many thanks will do
Hi Joe. Your videos are most informative. Keep it up. I have a presonus studiolive 32 series iii. Beautiful piece of equipment. I have a live show c9ming up in a couple of months that requires mixing a full orchestra with a band. We need 58 inputs. Question is, can we daisychain 2 studiolive 32s? I have read and seen 24s and 16s being cascaded but never 32s.
Hi Joe, firstly than you for sharing your knowledge on these desks. I have just purchased a studio live 16 series 3.
This is my first ever digital desk and I'm struggling to get a level that is not hot.
I tried to set up a vocal mic and I can't really get any decent volume on it before it goes into the red.
I have connected the studio mixer up to EV ETX 12p's tops and ETV ETX 15'sp subs.
My old analogue desk, my volume was very good, without having to turn up the speakers from 0 db' s.
What am I doing wrong?
Cheers
Gerry
Thank you so much for these incredible ans excellent videos !!! Could you explain how to record a multi effects and cab simulator like Helix of line 6 thrue StudioLive III in order to have the effects and cab simulation in the Aux return for musicians but recording only the dry signal in studio One ? Pleeeaaase ? Thanks again
Why not just record the sound with all the FX you want and get it right at the source?
Hey Joe, love that background on the wall behind you. What is it made of. Thanks. Always enjoy your videos.
It's just reclaimed wood, mostly palettes I think
I have the SLiii 16 and have been blown away by its capabilities. I decided to unbox it with a chainsaw, which Presonus seemed to enjoy lol. I really enjoy your channel and greatly appreciate how information, yet direct you are. I’m really looking forward to your coming vlogs, as well.
My question is: Have you found a way to record a vocal with the fx in the track OR track the dry vocal plus the fx on a second track at the same time? I’m not sure if routing fx to the DAW is possible while recording the track as well. Also, when routing analog via USB to the DAW, am I correct in seeing that the only gain/leveling option is the preamp gain or boosting a comp/EQ gain? I’d like a little bit more hotter signal than what I’m seeing now.
Thanks a lot for your hard work. Take care!
You have to route the FX through a subgroup or aux and then set that as an input in your DAW
Thank you for the reply. I'm making the transfer from analog over to digital, as far as mixing boards, and the SL3 was literally my only interest. I haven't been disappointed with it at all since I've received it and, although tedious, I'm enjoying the process of learning the flexibility within it. Your videos have been a welcome part of that journey. Thank you.
Been waiting for this video, Joe. Thank you so much. I'm new to using a mixer for recording, so the whole mix/headphone setup was a little confusing to me. Any headphone amps you would recommend? I really appreciate these videos and your help!
I use the Presonus HP4. It's really stinkin' loud. I'm sure there are plenty of other options.
I like you joe. He puts himself out there in a very honest way. At least that is my opinion. I miss your pro tools videos though, joe. When you coming back to camp PT?
Probably never.
No matter what i do, the whole mix just comes through every aux, i cant seem to make different mixes with different levels. Even with the faders all down the main mix still comes through
Great video, thank you very much
Joe, Can you give vocalist verb in phones only and eq,comp. etc to daw? I have the 16.4.2 and wanted to be sure nothing has changed per the channel to daw button.
Thanks,Harry
do you connect the jack from the output 15 and 16 into the headphone amp and they will heat the mix you made ? and where is it connected ?
Mirko yes.
how would you send effects to monitor/headphone mix??
Just like I showed in the video, only you have to go find the fader for the FX returns
Watch the damn video!
You forgot to mention the android and iPhone app which could let them control their own mix if they choose to.
YES, good stuff.
Shane Blanchard I want to know the beginning to the end
Hi boss I want to know more about are you so nice to talk to you next summer but I want to know more about it please teach me
Joe, on your User layer, you only need to assign one of the stereo channels. The other will blindly follow. This saves space on your user layer and simplifies mixing stereo channels.
Totally. Except if I want to adjust the preamp of one of the stereo channels independently, I'll need access to that channel too.
I hear you, I have never had to do that on a stereo channel, but I hear folks talking about having to do it all the time. Not sure why.
It's driving me crazy!!
What headphone amp do you use?
Presonus HP4.
Hi Joe,
First of all, great content, and very well explained, simply and useful.
I wanna know, for example, after having being recording the drummer, if i want the guitarist to hear my drums record via the studiolive console ( i use the 16.4.2 ) using auxs,( and nor via the DAW) how can i do this ? i use a HP 60 as a headphone amp.
Thanks for all your helps for us
Cheers from France
Kevin
Great Video Thanks
The whole mix is playing through every fader for me so i can't balance a headphone mix. Its just the whole mix through every channel
Good to know
Thanks for watching, Michael
cool
cool!!!
Mate i will literally pay you to talk me through this because im losing my mind here. Why have they made it so damn difficult?
If you're trying to play back tracks from your daw through the mixer, I vote don't bother. It's doable, but you have to route every track to a different USB output to do it. I don't think it's worth it.
Κατάπαυσις :)
Ha!! Nice catch.
Great videos!