Unique idea that will cost you $10! It's definitely worth it!
HTML-код
- Опубликовано: 22 апр 2024
- Hi friend. I made a great video for you in which I used a car jack. I have turned it into a very useful mechanism that may be useful to you!
Friends, my name is Vanya! I am the author of the channel HandCraft.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy - Хобби
Hi, I hope you liked this mechanism) Rate from 1 to 10
Ten points 👍
I see it as a 10 !
Definitely a 10 from me
10
Very nice. 10
Thought I was going to die of old age before I figured out what you were doing! I was impressed in the end!
That's very clever! You deserve 11 out of 10 for that!! To be honest with you, I think that if you mass produced that table, it would very likely sell! As you demonstrated, it is operable with a load on it. I would love something like this (a variation of your design) that is a storage frame/box that allows me to load fully laden box/frame onto a trailer (or van) without any lifting whatsoever.
I really liked the idea! Of such systems made on RUclips, this one is one of the best 👍 Continue on
Wow, curiously, for at least 15 years I've been thinking about doing something similar for my use, not with wood, but i do more things with metal, but was never been able to figure out the way to do it, and now you've shown me how to do it.. thank you very much.. that's a super great idea..
It's been two weeks since you're coming so have you started?
Very cool work bench. I definitely give it a 10. Good job!
I'll give it a 10 Genius!
Thank you for such a high assessment! I am very glad that you liked it)
This content, is great work. Very worthwhile.
10 👍. Fun project to watch as well!
Wonderful addition!!! 10 ⭐ Rating!
I am very glad that you liked it! Thank you for such a high assessment👍
Cool. I think I'll use that jack to create a scissor lifting table.
Thenk you man
absolutely fantastic !
I didn't see anything in the video that looked like the image that caught my attention. So yes, I was surprised.
Awesome idea. Its a 10.
Thank you sir for such a high assessment!
Стол с вертикальным взлётом))
Really smart!! I would give it a 99/100
Great video. Clever engineering.
Very nice
I am giving it a 10/10 brilliant 👏 idea 😃
Ok, fantástico trabajó maestro, gracias por compartirlo.👍🤓😜
Nice cart, Well thought out! a 10 for creativeness and usability :🙂
It's a 10 for me. And I'm immediately impressed... you seem to have cut the shaft off at a nice 90 degrees. I can't cut or drill at 90 degrees even if my life depended on it.
Great idea and plan!
Great job, man👍
Not an idea I've seen before. Great job 10
Of course a 10 !! Great job and a really useful idea ! 😊
Nice job I was surprised
Very unique and a very nice cart. I'm sure the kids enjoyed riding around on it.
Bellissimo lavoro! come hai mostrato, col tuo meccanismo anche un bambino potrebbe spostare quel banco da lavoro
Awesome video and a 10 on the table!!! 👏👏👏
Genius! 10/10
Это можно сделать с помощью двух рычагов.Если посложнее-одним. И не портить домкрат.
Brilliant....10. Excellent video work too.
Brilliant execution. Put blue thread lock on the bolts or replace with longer bolts. In military aviation, a minimum of three threads showing after the nut was tightened was mandatory.
Geniale e semplice da realizzare: complimenti!!👍👍
Amazing work, dude! That's just brilliant! 😃
Stay safe there with your family! 🖖😊
That's an awesome table set up...I need one adjustable in height...18 inches of travel... can support and raise/ lower 1500 pounds... and is 12v powered ... and either end independent raise/lower from the other
That’s awesome👍🏻👍🏻👍🏻👍🏻
10/10......awesome idea
10/10 cool project.
What a great idea
It's very nice, but couldn't you use a locking lever to do that?
An over center foot operated lift would be much simpler.
great idea! until last min i was like wtf is he building??? 😂👌
Nice!🤩
Lowell
9.5 lol. It would have been better if it were a metal table! ( from a welder…lol).
It’s a great idea, this could very easily be incorporated on to a vice stand or movable welding table.
Sweet!
10 could you post where you ordered the Jack from, I don’t think we have that kind in the US, thanks and great job and idea.
That's a standard Mercedes jack, go to any wreckers
Trailer tongue jack.
Хорошая идея для станков в мастерской
Если у вас валяется в ведре домкрат колëса, болты и гайки, фанера и клей. То да хорошая идея. А так это, чугунный мост.
@@shallowgrave2642 в столярной мастерской всегда не хватает места. Возможность перемещать станки очень хороша.
10+ great work
very good!
Супер идея 👍
Nice modification, but it's not really a feature of the jack if you change its structure so much.
Nice video, but adding 2 rolling casters and 2 locking casters wouldve sufficed
в поддержку канала 🤔
Très bien: 10
9👍👍👍👍👍
9
rolls near soil
price ?
Now, of course, everyone has a workshop full of expensive tools, welding equipment, and the skill to use them, otherwise this is just a video of Handcraft showing off his workshop full of expensive tools, welding equipment, and the skill to use them, better known as an ego trip, isn't it?
Solid 8!
залипательно 👌👌👌👌👍👍👍👍😅😅😅😅
Me gustó mucho el sistema es muy original, pero no logre entender el mecanismo
Cool.
Hmm you know they sell wheel casters that you step on an they lift then step on the small lever next to it an they fold back up , and they don't cost much at all that can do the same thing.... just saying.
10! That's a LADA jack, right?
Cool ❤
Hi friend
Yes, 10
😁👍
Very ingenious idea but also very overly complicated for its use. There are much easier ways to accomplish this, i have a table that uses a simple pull lever to to do the same thing and is a much simpler process to build.
L’idée est bonne, mais trop compliqué et coûteux pour rien. Bravo quand même…
😂😂😂 super vozidlo pro deti
👍👍👍👍👍🤜🤛
🙏👏👍💪
10
So ein Aufwand für ein Tisch mit Rollen, so kann man auch die Zeit vergeuden 🤦♂️
what it is balls size number??
Muita engenharia pra nada...
What a monumental waste of time
Photo on video cover has nothing to do with the video = 0
Execution of an idea = 8
Practicality of end product = 5
Materials used = 6 Questionable use of plywood for moving parts under stress
Cost of materials = 4? Dependent upon longevity of apparatus could be a 1
Video enticement to build one for self = 1
Good luck with your next idea.
Hello. Thank you for such a detailed assessment of my work. I will correct mistakes and get better)
@@hand_craft
Keep in mind that they weren't mistakes, they are all just learning opportunities. 🙂
Just a little bit of overengineering for a couple bloody wheels , good Lord 🤣🤣😂😂🤣🤣👎👎👎👎
9 minutes of your life, totally wasted.
Идея конечно фуфло, а вот домкрат жалко. На eBay его цена 120 бакс. стол столько не стоит.
Trailer jack and not a car jack right
I would like to see how you jack up a car with that jack
You know.if you hadn't shown me how to tighten screws I don't think I could have done it!
10
10
10
10