At 3years old and about 9000kms. with no horrible noises, my bike motor stopped working with error code 500 displayed. Being out of warranty, it would likely have cost a new motor from a Bosch ebike dealer. HOWEVER ! finding Peter and his video tutorials resulted in a working motor, with me replacing my cracked idler gear with parts supplied by Peter. Total cost less than 2 new tyres, plus the knowledge that with Peter's services I've no real excuse for spending thousands of pounds on a new 2020 motored ebike.
Ye, but if you get a "custom" e-bike ala stealth bikes, suron or qulbix you get a lot less moving parts, less servicing and better performance. I would never buy a bosch or the likes esp now seeing this video.
@@manipulativer dude those look like dirt bikes, not regular bikes that you can ride around town without getting hassled for a license. also, I don't see anything about the bosch motor that's disconcerning
@@jameswilson9011 it depends on where you live. Our police is pretty chill where in most other countries there is only babylon police. I am sorry for you guys
Hi, I have the same problem with error code 500. (Drive unit BDU-290P - Performance line speed) I cycled 9,600 km. Isn't it sometimes hidden in the software to force the drive to be replaced around 10K km? Generally, the engine still works and the error appears after a break in pedaling. If you maintain even gentle pressure on the pedals, you can travel up to 20 km. Could you describe what was the cause for you? The service claims that the entire engine needs to be replaced. It's absurd to replace the entire engine every season! Regards.
As a motor mechanic and owner of one of these motors, i thoroughly enjoyed watching your video and careful, excellent workmanship! I get great pleasure in rebuilding gearboxes, etc and this was pleasant to watch. Very interesting and advanced little piece of technology that has been implemented on a pushbike! Now i know where my money went! Thank you sir!
These guys are the most helpful and friendly people you could ever deal with, i dropped my motor off and collected two days later sounding beautiful 👌 all for the price of a night on the town 👌👌 can’t recommend enough 👌👌👌
I am stunned that the circuit board is not encapsulated, it’s wonderful that you are showing us the pull down, I noticed that there is very little info like this on the internet.
Very good video, clear naration, good video and no annoying background music. Within minutes of watching, I asked myself, how can these expensive motors be manufactured with inadequate water protection. Sealing a shaft exiting a casing is mastered by thousands of applications such as motor vehicles, boats, kitchen and laundry appliances etc, so this is a complete manufacturers defect. The seal design needs to be revisited, as this these EMTB motors should be impervious to rain, puddles and creeks etc. The manufacturers should be reparing these free of charge.
Thanks for your kind words. I am not defending the manufacturers here but if you look at the evolution of these motors, they were first used on road bikes and can normally cope with the odd puddle and a wash down with bucket and sponge. The odd failure would have been negligible. It was the cycle manufacturers who decided to try these motors in mountain bikes, possibly with the manufacturers blessing? I don't think either party fully understood the amount of abuse and heavy cleaning an MTB goes through. There is a silver lining to all this. The motors coming through now, are being better sealed. I am sure the issues we are seeing now will be a thing of the past.
Absolutely fantastic presentation on fixing ebike motors. I now have no fear if after warranty my motor fails, simply contact yourselves! Bravo I say.................👏🏽
I just had my CX fully overhauled at the start of March 2021, it was getting a bit rough in the LHS crank bearing and play in the cranks....Amazing job it's like new again!!! I'd love to have the confidence to tackle this myself but some things are best left to the professional engineers....HIGHLY recommend PLB....
Questo video è eccezionale e mi è stato molto di aiuto per sistemare i cuscinetti del motore , senza questo video non mi sarei azzardato a metterci le mano, GRAZIE GRAZIE GRAZIE.
Just serviced mine - thanks for the great vid. You’re right, the trickiest bit is reinstalling the shaft and gear assembly behind the circuit board. Just ordered more bearings and a mudstop flange from you tonight!
I think you've just saved me thousands of £'s. Been seriously considering buying an electric full suspension mountain bike. But after seeing this I think I'll continue to grind away without the aid of a motor. Even my non electric mountain bike has 8 bearings in the frame, that need replacing every couple of years. Add all the bearings in a motor and it's going to get very expensive just to maintain very quickly. My knees are going to have to go without the assistance of a motor for a few more years I think.
Excellent video Pete iv got a performance line Moyer a moustache friday27bought two years ago Moyer sounds great I’ve done 6,000miles hope it keeps going
Excellent video- I've just bought a KTM with CX, I'll take as best care that I can with it but great to see how the internals strip down and what's involved...Looks like my manky shed would not be the place to do a job like this and without a press and the tools!! Thanks!
What a great video, thank you very much for this excellent job, would not buy a e-bike with this kind of motor, years ago the name of Bosch was quality this time seems to be over.
I have an E-bike with a performance CX motor too, after watching this one I started thinking my bike made quite a bit of noise too. It's like when you read about someone having some awful disease you start feeling the symptoms too. I think this video makes the motor sound too quiet after it's fixed, it's Hard to judge noise from a video. The noise my bike makes seem to mostly come from the gears inside the motor. The pedals still feel silky smooth when you rotate them, but the motor does seem noisier than this one does after it's fixed. I knew about this issue from the start (probably from watching this video a year ago) so I've avoided water like the plague with this bike, it's never been washed, never been used when it's wet. A couple of times it started raining lightly when I was a couple of km away from home. I doubt I've ever gone through a single water puddle. I'm guessing if you get this issue you would see a difference in how long the battery lasts, because of the extra friction.
Great comment atnfn. Believe it or not, that motor sounded a lot quieter in real life than it did on the video! If your motor is noisy, there will be a reason for it. Firstly, don't be afraid of the rain or water. Enjoy and clean your bike, just don't direct water under pressure at the bearings and your motor will be fine. If your motor is noisy and your crankshaft rotates smoothly, it maybe a broken crankshaft gear circlip, this allows the crankshaft gear to rub against the transfer gear and the motor sounds excessively noisy. If you send it to us in the UK, I would be happy to quieten it for you.
@@Ebikemotorcentre Hi, Nice video! I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it. Thank you
Muy buen video, explica claramente la forma de reparar el motor Bosch. Aqui en Republica Dominicana nadie sabe hacer algo asi y todos los dias hay mas bicicletas con motor Bosch aqui.. Buena oportunidad de negocio...
This is one reason why i never wash my bike . i brush and vacuum dirt and mud off . The other reason is the dust and dirt and scratches act as a bit of a theft deterrent. It’s the flashy super clean bikes that get nabbed first . I keep my chain lubed and brakes and gears clean but the frame is filthy .
I wonder why they put the mechanical componets right next to the circuit board? If they separated them they coud run all the bearings in an oil bath and all of the componets would last much longer in my opinion. Or maybe some better outside seals?
It's a good question and although oil is extra weight and cost, better seals should have been fitted. But basically, when these and indeed most ebike mid drive motors were conceived, they were primarily designed for road bikes and as road bike motors, they suffered relatively few failures. A few years later when manufacturers started putting the motors into mountain bikes they underestimated the abuse they would undergo or the conditions they would see on a regular basis. Ebike motor manufacturers are giants and for things to change, it can't be done overnight (a bit like turning a supertanker round). However, things are changing and a lot of the newer motors are better sealed, so maybe in a few years, I will be out of business!
Three things: I would like to know what the owner did to get the motor in that condition? Secondly I wouldn't be taking my damaged motor anywhere eise but here.. Thirdly that component board looks like a weak link and should have been replaced... Of course that would have needed to be sourced..
1, This is quite common unfortunately. Usually, hose, pressure washer, deep ford or flood, transporting behind a vehicle on wet roads without the motor covered, etc. 2, Thank you 3, The board is programmed to the electric motor angle, so not as easy to replace as it sounds + the can-Bus software is a little tricky too. We are working on a fix for the board as we speak :)
I did this as my bearings got jammed. I have ordered your kit of bearings. It was quite straight forward to replace them. Ended up with new error 500 now and I think I will just scrap this stupid bike...
Obviously the damage was caused by infiltration of water. Bosch is regarded as the most reliable motor but it seems like they only tested the motors in the factory.
How important it's to use the right grease for these motors. I'm using blue grease. Before I use to used white grease synthetic but it doesn't last too much
The right grease is generally critical. The wrong greases can affect the plastic gears, can cause the clutch bearings to slip, damage seals and O-rings etc. For example, using an aluminium based grease with a lithium based grease, will turn the lithium grease back to oil, and then it will just run off of the parts it should be protecting. The genuine Bosch grease is readily available and does a fantastic job.
The only O-rings that seal anything are between the crankshaft and the crankshaft bearings, and to be honest, they are predominantly there to stop the bearing spinning on the crank. Because water can sit in this area and rust the bearing to the crankshaft, I usually smear some water resistant grease around this area. We tend to fit the double lip rotary seal between the crankshaft and the sprocket carrier, this protects the right-hand crankshaft bearing completely. Then we fit the MudStop to protect the main motor bearing. We have a seal for the left side under development and it should be ready before winter.
All the moving parts within your motor run on bearings, so squeaking is not common. First, I would remove the chain from the front sprocket and turn the pedals forward and backwards. This will eliminate the drive train, and pushing the crank arms forward and backwards uses different bearings and may narrow down where your squeak is coming from? If you find something your not sure of, you are welcome to email me through the contact page at performancelinebearings.com
Happy new Year to all of you.I love your videos, they are so helpful and your explanations are superb. I have a problem with a bosch performance line cx and i would love to get advice from you: gear makes unknown noises although the drive works. I believe the bearings are okay. I suspect that the first tooth ring causes problems, even though all teeth are present. I stand ready to answer further questions and would be so grateful for your help. Thx in advance, Heijo.
In this case it is usually the electric motor brass gear has worn or the electric motor bearings are failing. Easy test is to ride faster than 15.5mph or 25kph and when the motor cuts out you should hear a big difference in noise. If not, please email me and we can discuss further. www.ebikemotorcentre.com
I got a friend who has done 6000 commuting miles on his CX motor and it sounds as good as the day he got it. wonder how many miles this motor had done?
You have a good point Mark. If these motors are used on road in relatively clean environments they will run and run, just as a standard peddle bike will. When you get them in a mountain bike and use them off road in wet, dirty environments they can suffer, again, just as a standard mountain bike does. This motor had not done big miles, but had seen a lot of water!
Turns out I sent this video to my mate yesterday and asked him if he had ever had any servicing done to his motor and he said none at all and wasn't aware that it needed servicing ever lol But as you said this motor has seen a lot of water and hard water! IMO any well known brand mid mounted motor is good for at least 10 years in normal road conditions. These motors are very new technology and I do wonder what the life span / mileage range of them will be. I'm running an Active Line Plus motor myself with 2k on the clock and it has been fantastic, never missed a beat. But again, I only do normal road riding. Thank you for your reply :)
Muy bueno tu canal, congratulations!!! Tengo el motor Bosch performance line cx del 2018 que está pidiendo un cambio. Me podrías decir de algún sitio donde poder comprarlo??
I have Bosch active line plus basically brand new bike and motor starts giving annoying noise... Probably bearings are bad. I cannot use warranty because I bought it used from second hand ... It's very annoying.
Fascinating, thank you 🙏 personally I’m surprised these don’t run in an oil bath with a sump… I realise the electronics might not like that but auto gear boxes on cars seem to cope with valve bodies running solenoids and wiring, and I believe, possibly wrongly, some electronics? But at least if there was water ingress the oil could be changed. Plastic cogs? To stop harshness I guess but that can’t be good. Metal powdered cast gears instead? …anyway any Shimano motors in? I see they keep cracking crank shafts to crank arms falling off…?
Hello Pete Collard, first of all I have to compliment your videos. The individual steps are explained very well and are also well illustrated. When can we expect a video for the Bosch Drive Unit Performance CX Generation 4 (bearing swap)?
The Bosch Gen 4 is a very different motor to work on. It's more complex, special tools are required, there are a couple of parts that are extremely easy to break, and everything must be done in a very particular way or you will have problems. When we see the mess many people make of repairing the Gen 2, we are reluctant to encourage them to have a go at the Gen 4.
@@Ebikemotorcentre Thanks for the answer! I have one more question, do you have to re-register the motor after connecting the electrical plugs? Thank you in advance
Was a great video and much appreciated. Couple of questions as I feel it could just leak again. No smear of grease on the bearing outers or seats before you pressed the bearings in? Makes bearings easier to remove in the future. Looks like water has got to that circuit board covering those electrics with liquid electric tape or corrosion x oil which is safe for electrics would be wise as this waterproofs the board. Would definately no matter what the seal looks like add some silica sealant around the housing as obviously water has got in there and I would be adding a good layer of grease on the outside of bearings to help stop water. It's pretty poor to have water enter an outfit like this I have a bafang motor on a fat bike that has been through a lot of deep water fully submerged and has had no ingress. Looks like the Bosch motor could do with a pre service before use. I. Looking at getti g one so will strip it down from new and redo seals.
This motor was pressure washed so hopefully, would not suffer the same fate again but I get your point. If we service motors in our workshop, they all get a smear of waterproof grease on the outer face, it makes no difference for later removal and does not last 5 minutes on the bearing seal, but it does help with any gap between the bearing and motor case, stopping water or debris entering this space. The printed circuit board is already quite robust and thinly coated. Also, with little fresh oxygen within the motor any corrosion is very slow and can normally be easily removed. Normally, if the board has been wet enough to cause problems, the rest of the motor will also be badly damaged and is usually scrap. I have never known a motor cover seal leak yet? So adding silicone to something that does not need it seems a bit of a waste? It also makes future removal of the cover more difficult and time consuming. Fortunately, we now offer seals for the outer bearings on the drive side of the motor and have a seal in prototype for the left side. Personally, I would not buy any current ebike mid drive unit if you want to take it under water. I would stick with your Chinese one because it will be cheap to replace 👍
Don't worry Scott, the Bosch motor is a good motor and if you do have any problems, they can now be fixed by www.performancelinebearings.com and normally for less than the cost of a rear cassette :)
My Cannondale had a noisy motor from new, it wasn't until my mate got his LaPierre with the same Bosch motor I realised how bad mine was. 300 odd miles I had on it and it was replaced free with a new one, perfect, apparently there is a 2 year warranty on them and it starts again on a replaced motor ?
Good video, not simple to change the bearings at all. Surprised at water ingress into these? Are the latest builds better, I’m just getting one? I’ll send it to you for service, how many miles generally before a service is required?
No, changing the bearings is not something you want to do in your shed! Don't panic, the Bosch motor is an excellent motor and very high quality compared to some. The later builds are the same as the early builds, but the water in this one was caused by the last person who worked on it. Sometimes, when you re-fit the right hand motor cover, there is a dowel (peg) at the top and bottom of the motor that align the cover up with the gasket face and screw holes. The dowel at the bottom of the motor can stick and once all the screws are done up and feel tight, there can still be a big gap between the case and the motor underneath. If this gap is not spotted, water can flood into the motor!
Dear people, what is the cause of the ticking or clicking noise I here when putting some pressure on the pedals? Its obviously produced in the crankshaft though.
Good day, I am writing from Ukraine through a translator. I have one question, I have a bosh gen 2 performens lain CX motor, I found a small shat on both sides of the shaft. Like an ordinary one, when the carriage is broken a little. Is it necessary to dismantle the motor to replace the bearings?
Hi Pete, I have a Bosch Performance Line CX, and a few days ago it began to make a noise, mostly on emtb o turbo mode but only at climbing.... Similar to a coffee grinder. How can I know the kind of bearings or kit I need to replace? Thanks a lot
The “coffee grinder” noise is usually the first sign that the main motor bearing is failing. As your bike is 2018, it should be covered under warranty. As your bearing has failed so soon, this normally points to an issue with water getting into the bearing? This maybe from a deep-water crossing, hosing/pressure washing the bike around the crank area etc. You can normally confirm if it is only the main motor bearing by removing the chain from the front sprocket and turning the pedals. You will hear the bearing while pedalling forward, when you pedal backwards, you are then listening to the crankshaft bearings. Either way, if this is something you want to fix yourself, I would leave the motor in the bike, remove the right hand crank arm and sprocket, remove any plastic motor covers and then remove the right-hand motor cover, you will then be able to see and feel all the bearings and ensure you get what you need. Or, you can send your motor to us for repair. I hope this answers your question?
I have an electric bike with a small hub motor which had nylon pinion gears which I swopped out for metal ones . cost 30 euros ..... no other problems with bearing or anything in nearly five years...... this Bosch unit seems ridiculously complicated and the repair looks seriously expensive ........ very glad I don't have one !!....... How much was it ?????????
A few years off road, through rivers dust, dirt, over rocks and tree roots and constant cleaning. Not to mention climbing 1 in 2 gradients, pedal strikes etc. I reckon they do alright.
I have an active line plus motor and the teeth on the plastic gear broke off. I can't find a rebuild kit for my motor. Do you think it is possible to separate the plastic part from the aluminum center part for replacement?
It is not possible to remove the plastic gear from the boss without damage. We do sometimes get good condition gears for sale, but they are rare. Have you spoken with our German partner www.ebike-doktor.de he maybe able to help?
@@Ebikemotorcentre thx for the fast reply. The metal gearring tooths are completely worn out.. (the one in 16:53) They can not fix it at my local bike shop and bosh doe not sell those parts.. so i hoped i could find it somewhere on the internet. (sorry for my bad English)
@@orsoncools3279 I heard on another video that Bosch has made a commitment to have parts available for at least 5 years after production ends on any motor....what a load of BS!
We use Bosch Drive Unit Grease inside the motor and Bosch Long Life "Tacky" Grease outside the motor. You can see these here: www.ebikemotorcentre.com/bosch-gen-2/
Hi Pete just fitted one of you right hand bearing kits thank you for the quick delivery, I am also going to order a left hand crank arm drive bearing from you for my other bike, question for you why don't you unplug the torque sensor out of interest and just have it hanging loose. Cheers pal
There is a thin silicone gasket seal between the cover and the motor that will normally come away intact. If it's undamaged, it can be re-used. Obviously, if damage to this gasket has occurred, a thin film of silicone gasket sealant can be used to re-seal the motor.
@@Mindsi But it would be inside an enclosed space, so as the Zeolite dried, the moisture would condensate out, inside the motor again. Time for plan 'B' maybe.
Good day I'm with Ukraine I'm writing through a translator. I have one question motor bosh gen 2 Performens Lain CX there is a slight wobble on both sides of the shaft. The carriage is slightly broken. Do I have to dismantle the motor in order to replace the bearings?
We use a very specific gear grease for combinations of plastic and metal gears. You can find it on our site here: www.performancelinebearings.com/product/gear-grease-for-ebike-motors/
If you are spinning the pedals backwards, this is normal. If you are spinning the pedals forwards, look at the aluminium boss that the front sprocket is attached to. This can wear and allow the motor to spin without turning the sprocket and chain.
Pete, I wish I'd paid for you to change my bearings rather than doing the warranty repair which took six weeks under lock down. However I now have another 2 years warranty. I'm guessing you couldn't match that? Or could you?
We give 12 months on all our parts, labour and workmanship so no, although we will always look after a customer as much as possible if they are outside this time.
@@Ebikemotorcentre Thanks, that's very reassuring. I think you are doing a brilliant engineering job with those rebuilds. It's a shame Bosch don't let you do their UK warranty repairs. That would save time and help your business.
This is always easier to answer with pictures, you should find the answer to this question here: www.ebikemotorcentre.com/frequently-asked-questions-answers/#Bosch-Motor-Questions
If you watch closely I do grease the gears. Unfortunately, back when I did this video the right grease was hard to come by, so I used an alternative that is not easy to see. Also, you only grease the largest gear of any gear couple, otherwise you end up with grease everywhere once it has squeezed from the teeth. I grease the crankshaft gear, the freewheel gear, the smallest plastic drive gear and if removed, the large plastic drive gear. This then covers every gear in the motor.
Hi Pete, I took my outer cover off and the central spindle and gears stayed attached to the main body. Any solution to pulling this off without damaging the nylon gears? Thanks Rob
@@multiclimb The cheapest easies way to repair your motor would be to fit a Bosch service kit, it will give you all the parts you need for that side of the motor. If the rest of the motor is bad, use our service kit + www.performancelinebearings.com/product/bosch-motor-service-repair-kit/
Do your research, I am sure you would be happy with either one. All UK bikes are restricted to 15mph though. You would need to fit a de-restrictor (illegal in the UK)
Yes, the Brose has a free wheel drive that lets you pedal without turning the electric motor. The Bosch drive is geared so each turn of the pedals equals 2.5 turns of the crankshaft, this makes it hard work.
The Bosch feels like it hit pocket of sand when max assist speed is reached. As this is exactly the speed range you want to commute at I find this disconcerting and it takes all the fun out of it for me. Legal consequences of derestrcting are not to be sneezed at, mind you.
First to add to the many other thanks, I really appreciate you making this video! :) I have an old motor that I am attempting to overhaul, and I have seen a few other videos. In a couple of the videos they say that we shouldn't touch the shaft of the main drive gear that sits inside the cover, but they don't say why not. And I see that you do touch it when removing the needle rolling bearing inside. Is there something I should do extra after touching it to make sure it works properly after reinstalling it?
Don't worry, Bosch only put this in their instructions to ensure this part was not touched by dirty fingers. As long as this part was clean when the motor goes back together it will be fine.
We had some manufactured because although they have a standard designation number, they are not a standard size! If you need bearings for your Bosch motor, check out our website www.performancelinebearings.com
Have U ever heard a carpal tunnel Please don't hit anything with your hands use a hammer or a long pipe to get the required torque Thank you very much for the video
At 3years old and about 9000kms. with no horrible noises, my bike motor stopped working with error code 500 displayed. Being out of warranty, it would likely have cost a new motor from a Bosch ebike dealer. HOWEVER ! finding Peter and his video tutorials resulted in a working motor, with me replacing my cracked idler gear with parts supplied by Peter. Total cost less than 2 new tyres, plus the knowledge that with Peter's services I've no real excuse for spending thousands of pounds on a new 2020 motored ebike.
Does it still run and how many kms did you out on it?
Ye, but if you get a "custom" e-bike ala stealth bikes, suron or qulbix you get a lot less moving parts, less servicing and better performance. I would never buy a bosch or the likes esp now seeing this video.
@@manipulativer dude those look like dirt bikes, not regular bikes that you can ride around town without getting hassled for a license. also, I don't see anything about the bosch motor that's disconcerning
@@jameswilson9011 it depends on where you live. Our police is pretty chill where in most other countries there is only babylon police.
I am sorry for you guys
Hi,
I have the same problem with error code 500. (Drive unit BDU-290P - Performance line speed)
I cycled 9,600 km. Isn't it sometimes hidden in the software to force the drive to be replaced around 10K km?
Generally, the engine still works and the error appears after a break in pedaling.
If you maintain even gentle pressure on the pedals, you can travel up to 20 km. Could you describe what was the cause for you?
The service claims that the entire engine needs to be replaced. It's absurd to replace the entire engine every season!
Regards.
As a motor mechanic and owner of one of these motors, i thoroughly enjoyed watching your video and careful, excellent workmanship! I get great pleasure in rebuilding gearboxes, etc and this was pleasant to watch. Very interesting and advanced little piece of technology that has been implemented on a pushbike! Now i know where my money went! Thank you sir!
Was great hey. Nice and slowerly explained how it's done. With little tips to watch out for along the way
@@stevenmadsen53 yep. Will definitely follow this video when the time comes for me to rebuild my motor.
Can the control board work after having water ingress. As in replacing bearings and seals and drying out the board?
These guys are the most helpful and friendly people you could ever deal with, i dropped my motor off and collected two days later sounding beautiful 👌 all for the price of a night on the town 👌👌 can’t recommend enough 👌👌👌
I am stunned that the circuit board is not encapsulated, it’s wonderful that you are showing us the pull down, I noticed that there is very little info like this on the internet.
It's encapsulated by the housing?
@@hexacetat which by design lets moisture in! My washing machine PCB is coated and that doesn't get dowsed in water at all.
Very good video, clear naration, good video and no annoying background music. Within minutes of watching, I asked myself, how can these expensive motors be manufactured with inadequate water protection. Sealing a shaft exiting a casing is mastered by thousands of applications such as motor vehicles, boats, kitchen and laundry appliances etc, so this is a complete manufacturers defect. The seal design needs to be revisited, as this these EMTB motors should be impervious to rain, puddles and creeks etc. The manufacturers should be reparing these free of charge.
Thanks for your kind words. I am not defending the manufacturers here but if you look at the evolution of these motors, they were first used on road bikes and can normally cope with the odd puddle and a wash down with bucket and sponge. The odd failure would have been negligible.
It was the cycle manufacturers who decided to try these motors in mountain bikes, possibly with the manufacturers blessing? I don't think either party fully understood the amount of abuse and heavy cleaning an MTB goes through. There is a silver lining to all this. The motors coming through now, are being better sealed. I am sure the issues we are seeing now will be a thing of the past.
Absolutely fantastic presentation on fixing ebike motors. I now have no fear if after warranty my motor fails, simply contact yourselves! Bravo I say.................👏🏽
Thank you so much! The pedals in my Drive Unit didn't move forward and with the help of this video I found that the main motor bearing seized.
Outstanding video! Wow. I just learned so much! Thank you, thank you, thank you! Your presentation style is the best, keep up the great work!
I just had my CX fully overhauled at the start of March 2021, it was getting a bit rough in the LHS crank bearing and play in the cranks....Amazing job it's like new again!!! I'd love to have the confidence to tackle this myself but some things are best left to the professional engineers....HIGHLY recommend PLB....
The best machine shop teacher on earth !
A very detailed video and excellent demo on a complete overhaul of a CX motor. I know where to come in the future! Many thanks.
Questo video è eccezionale e mi è stato molto di aiuto per sistemare i cuscinetti del motore , senza questo video non mi sarei azzardato a metterci le mano, GRAZIE GRAZIE GRAZIE.
Yes, wow.....excellent video by a gentleman who really knows what he is doing. Thank you!
very grateful for people like this
Great video.... business coming your way when I need this done.
It is very reassuring to know that there is a repair solution for the bosch engine bearing problem.
Thank you
Thank you much for this Video. I also did a few bad bearings. This Video helped a lot!!
Just serviced mine - thanks for the great vid. You’re right, the trickiest bit is reinstalling the shaft and gear assembly behind the circuit board. Just ordered more bearings and a mudstop flange from you tonight!
I think you've just saved me thousands of £'s. Been seriously considering buying an electric full suspension mountain bike. But after seeing this I think I'll continue to grind away without the aid of a motor. Even my non electric mountain bike has 8 bearings in the frame, that need replacing every couple of years. Add all the bearings in a motor and it's going to get very expensive just to maintain very quickly. My knees are going to have to go without the assistance of a motor for a few more years I think.
Excellent video Pete iv got a performance line Moyer a moustache friday27bought two years ago Moyer sounds great I’ve done 6,000miles hope it keeps going
Your videos are giving food for thought as I look to buying a used ebike. Avoid grinding and gritty motors.
I bet this video is in real time. Skilled worker at work!
Great video. Thank You. Brits know how to do/repair/invent things!
Trank you very very much for bis Video 👍
Excellent video- I've just bought a KTM with CX, I'll take as best care that I can with it but great to see how the internals strip down and what's involved...Looks like my manky shed would not be the place to do a job like this and without a press and the tools!! Thanks!
Very good. Congratularions.
He sure knows what he’s doing.
What a great video, thank you very much for this excellent job, would not buy a e-bike with this kind of motor, years ago the name of Bosch was quality this time seems to be over.
Don't worry, the quality was there, just the sealing wasn't. However, this has been rectified to some extent on the latest motors.
Great job you make, Thanks for this video I have all tools so i hope I need this in a distant future🙂
I love your press, i feel like i will need one soon
I have a big new one now :)
I have an E-bike with a performance CX motor too, after watching this one I started thinking my bike made quite a bit of noise too. It's like when you read about someone having some awful disease you start feeling the symptoms too. I think this video makes the motor sound too quiet after it's fixed, it's Hard to judge noise from a video. The noise my bike makes seem to mostly come from the gears inside the motor. The pedals still feel silky smooth when you rotate them, but the motor does seem noisier than this one does after it's fixed.
I knew about this issue from the start (probably from watching this video a year ago) so I've avoided water like the plague with this bike, it's never been washed, never been used when it's wet. A couple of times it started raining lightly when I was a couple of km away from home. I doubt I've ever gone through a single water puddle.
I'm guessing if you get this issue you would see a difference in how long the battery lasts, because of the extra friction.
Great comment atnfn. Believe it or not, that motor sounded a lot quieter in real life than it did on the video! If your motor is noisy, there will be a reason for it. Firstly, don't be afraid of the rain or water. Enjoy and clean your bike, just don't direct water under pressure at the bearings and your motor will be fine.
If your motor is noisy and your crankshaft rotates smoothly, it maybe a broken crankshaft gear circlip, this allows the crankshaft gear to rub against the transfer gear and the motor sounds excessively noisy.
If you send it to us in the UK, I would be happy to quieten it for you.
@@Ebikemotorcentre
Hi,
Nice video!
I have cube touring hybrid one 500 ebike, since it is a paddle assist and due to my health requirements I would like to add throttle to my cube ebike, please advise / guide on how to go about having throttle control installed in it.
Thank you
Fantastic class my friend, learnt a lot👍😁
Thats magic to make out of a coffee grinder a motor for an e-bike
Muy buen video, explica claramente la forma de reparar el motor Bosch. Aqui en Republica Dominicana nadie sabe hacer algo asi y todos los dias hay mas bicicletas con motor Bosch aqui.. Buena oportunidad de negocio...
Another great one Pete, thanks much !!!
Thanks a lot for another great video!!!
Really appreciate this video. I don't know anyone in the states doing this.
This is one reason why i never wash my bike . i brush and vacuum dirt and mud off .
The other reason is the dust and dirt and scratches act as a bit of a theft deterrent. It’s the flashy super clean bikes that get nabbed first . I keep my chain lubed and brakes and gears clean but the frame is filthy .
Outstanding vid Pete! Well done mate! - Steve, Victoria BC -
Fantastic bit of maintenance and hopefully with a few views it will sink in . Cheers!
I wonder why they put the mechanical componets right next to the circuit board?
If they separated them they coud run all the bearings in an oil bath and all of the componets would last much longer in my opinion. Or maybe some better outside seals?
It's a good question and although oil is extra weight and cost, better seals should have been fitted. But basically, when these and indeed most ebike mid drive motors were conceived, they were primarily designed for road bikes and as road bike motors, they suffered relatively few failures. A few years later when manufacturers started putting the motors into mountain bikes they underestimated the abuse they would undergo or the conditions they would see on a regular basis. Ebike motor manufacturers are giants and for things to change, it can't be done overnight (a bit like turning a supertanker round). However, things are changing and a lot of the newer motors are better sealed, so maybe in a few years, I will be out of business!
Three things:
I would like to know what the owner did to get the motor in that condition?
Secondly I wouldn't be taking my damaged motor anywhere eise but here..
Thirdly that component board looks like a weak link and should have been replaced... Of course that would have needed to be sourced..
1, This is quite common unfortunately. Usually, hose, pressure washer, deep ford or flood, transporting behind a vehicle on wet roads without the motor covered, etc.
2, Thank you
3, The board is programmed to the electric motor angle, so not as easy to replace as it sounds + the can-Bus software is a little tricky too. We are working on a fix for the board as we speak :)
I did this as my bearings got jammed. I have ordered your kit of bearings. It was quite straight forward to replace them. Ended up with new error 500 now and I think I will just scrap this stupid bike...
Please contact me at enquiries@performancelinebearings.com and we maybe able to help. Regards, Peter.
@@Ebikemotorcentre thanks I have sent an email
Very well done sir! How long will a Bosch Performance line CX motor from 2019 last? It has done 5700km so far.
Obviously the damage was caused by infiltration of water.
Bosch is regarded as the most reliable motor but it seems like they only tested the motors in the factory.
I allso wrap to thin strips of plastic bag around the cranks . Stops water getting in when washing
How important it's to use the right grease for these motors. I'm using blue grease. Before I use to used white grease synthetic but it doesn't last too much
The right grease is generally critical. The wrong greases can affect the plastic gears, can cause the clutch bearings to slip, damage seals and O-rings etc. For example, using an aluminium based grease with a lithium based grease, will turn the lithium grease back to oil, and then it will just run off of the parts it should be protecting. The genuine Bosch grease is readily available and does a fantastic job.
Good to see what’s inside these motors..Bike shop told me these are water proof. Pfft.
Thank you. Most instructive. I did wonder (due to water getting inside before) how much sealent & silicone lubricant you would use in the "O" rings.
The only O-rings that seal anything are between the crankshaft and the crankshaft bearings, and to be honest, they are predominantly there to stop the bearing spinning on the crank. Because water can sit in this area and rust the bearing to the crankshaft, I usually smear some water resistant grease around this area.
We tend to fit the double lip rotary seal between the crankshaft and the sprocket carrier, this protects the right-hand crankshaft bearing completely. Then we fit the MudStop to protect the main motor bearing. We have a seal for the left side under development and it should be ready before winter.
My motor is squeaking when I manipulate the cranks. Any idea why? The cranks don’t seam to have any play.
All the moving parts within your motor run on bearings, so squeaking is not common. First, I would remove the chain from the front sprocket and turn the pedals forward and backwards. This will eliminate the drive train, and pushing the crank arms forward and backwards uses different bearings and may narrow down where your squeak is coming from? If you find something your not sure of, you are welcome to email me through the contact page at performancelinebearings.com
@@Ebikemotorcentre Thanks. I think it must be some kind of seal. I sprayed some silicone towards that area and will check out if it stopped next time.
This how-to is great! one question though - are you supposed to lube the gear teeth (metal on metal ones)?
Yes, but the best way we have found for this is to fill between the teeth of one gear and let the grease transfer to the opposing gear.
Happy new Year to all of you.I love your videos, they are so helpful and your explanations are superb. I have a problem with a bosch performance line cx and i would love to get advice from you: gear makes unknown noises although the drive works. I believe the bearings are okay. I suspect that the first tooth ring causes problems, even though all teeth are present. I stand ready to answer further questions and would be so grateful for your help. Thx in advance, Heijo.
In this case it is usually the electric motor brass gear has worn or the electric motor bearings are failing. Easy test is to ride faster than 15.5mph or 25kph and when the motor cuts out you should hear a big difference in noise. If not, please email me and we can discuss further. www.ebikemotorcentre.com
I got a friend who has done 6000 commuting miles on his CX motor and it sounds as good as the day he got it. wonder how many miles this motor had done?
You have a good point Mark. If these motors are used on road in relatively clean environments they will run and run, just as a standard peddle bike will. When you get them in a mountain bike and use them off road in wet, dirty environments they can suffer, again, just as a standard mountain bike does. This motor had not done big miles, but had seen a lot of water!
Turns out I sent this video to my mate yesterday and asked him if he had ever had any servicing done to his motor and he said none at all and wasn't aware that it needed servicing ever lol But as you said this motor has seen a lot of water and hard water! IMO any well known brand mid mounted motor is good for at least 10 years in normal road conditions.
These motors are very new technology and I do wonder what the life span / mileage range of them will be.
I'm running an Active Line Plus motor myself with 2k on the clock and it has been fantastic, never missed a beat. But again, I only do normal road riding. Thank you for your reply :)
Great Video.. good Job 👍🏼👍🏼
Good work!
Muy bueno tu canal, congratulations!!! Tengo el motor Bosch performance line cx del 2018 que está pidiendo un cambio. Me podrías decir de algún sitio donde poder comprarlo??
Excellent
Great job buddy 👍🇬🇧
Very interesting video thanks
How much did you charge for the rebuild?
Prices are here: www.performancelinebearings.com/ebike-repair-overhaul-service/
I have Bosch active line plus basically brand new bike and motor starts giving annoying noise... Probably bearings are bad. I cannot use warranty because I bought it used from second hand ... It's very annoying.
Please contact me through my web site and explain your noise in more detail if you can. I am sure we can help.
Fascinating, thank you 🙏 personally I’m surprised these don’t run in an oil bath with a sump… I realise the electronics might not like that but auto gear boxes on cars seem to cope with valve bodies running solenoids and wiring, and I believe, possibly wrongly, some electronics?
But at least if there was water ingress the oil could be changed. Plastic cogs? To stop harshness I guess but that can’t be good. Metal powdered cast gears instead? …anyway any Shimano motors in? I see they keep cracking crank shafts to crank arms falling off…?
I have thought about the oil too, I would like to build a motor like this...One day maybe.
Hello Pete Collard, first of all I have to compliment your videos. The individual steps are explained very well and are also well illustrated.
When can we expect a video for the Bosch Drive Unit Performance CX Generation 4 (bearing swap)?
The Bosch Gen 4 is a very different motor to work on. It's more complex, special tools are required, there are a couple of parts that are extremely easy to break, and everything must be done in a very particular way or you will have problems. When we see the mess many people make of repairing the Gen 2, we are reluctant to encourage them to have a go at the Gen 4.
@@Ebikemotorcentre Thanks for the answer! I have one more question, do you have to re-register the motor after connecting the electrical plugs?
Thank you in advance
@@rolfkronjager4228 No.
@@Ebikemotorcentre Thank you!
Hi. How much does service like this cost?
Changing all bearings. Thank you
Hello, you can find our costs here: www.ebikemotorcentre.com/repair-overhaul-upgrades/
@@Ebikemotorcentre thank you.
Was a great video and much appreciated. Couple of questions as I feel it could just leak again. No smear of grease on the bearing outers or seats before you pressed the bearings in? Makes bearings easier to remove in the future. Looks like water has got to that circuit board covering those electrics with liquid electric tape or corrosion x oil which is safe for electrics would be wise as this waterproofs the board. Would definately no matter what the seal looks like add some silica sealant around the housing as obviously water has got in there and I would be adding a good layer of grease on the outside of bearings to help stop water. It's pretty poor to have water enter an outfit like this I have a bafang motor on a fat bike that has been through a lot of deep water fully submerged and has had no ingress. Looks like the Bosch motor could do with a pre service before use. I. Looking at getti g one so will strip it down from new and redo seals.
This motor was pressure washed so hopefully, would not suffer the same fate again but I get your point. If we service motors in our workshop, they all get a smear of waterproof grease on the outer face, it makes no difference for later removal and does not last 5 minutes on the bearing seal, but it does help with any gap between the bearing and motor case, stopping water or debris entering this space.
The printed circuit board is already quite robust and thinly coated. Also, with little fresh oxygen within the motor any corrosion is very slow and can normally be easily removed. Normally, if the board has been wet enough to cause problems, the rest of the motor will also be badly damaged and is usually scrap.
I have never known a motor cover seal leak yet? So adding silicone to something that does not need it seems a bit of a waste? It also makes future removal of the cover more difficult and time consuming.
Fortunately, we now offer seals for the outer bearings on the drive side of the motor and have a seal in prototype for the left side.
Personally, I would not buy any current ebike mid drive unit if you want to take it under water. I would stick with your Chinese one because it will be cheap to replace 👍
very good, thanks
I just got my 2019 Ebike with this motor I hope I don't have issues
Don't worry Scott, the Bosch motor is a good motor and if you do have any problems, they can now be fixed by www.performancelinebearings.com and normally for less than the cost of a rear cassette :)
My Cannondale had a noisy motor from new, it wasn't until my mate got his LaPierre with the same Bosch motor I realised how bad mine was. 300 odd miles I had on it and it was replaced free with a new one, perfect, apparently there is a 2 year warranty on them and it starts again on a replaced motor ?
Good video, not simple to change the bearings at all. Surprised at water ingress into these? Are the latest builds better, I’m just getting one? I’ll send it to you for service, how many miles generally before a service is required?
No, changing the bearings is not something you want to do in your shed! Don't panic, the Bosch motor is an excellent motor and very high quality compared to some. The later builds are the same as the early builds, but the water in this one was caused by the last person who worked on it. Sometimes, when you re-fit the right hand motor cover, there is a dowel (peg) at the top and bottom of the motor that align the cover up with the gasket face and screw holes. The dowel at the bottom of the motor can stick and once all the screws are done up and feel tight, there can still be a big gap between the case and the motor underneath. If this gap is not spotted, water can flood into the motor!
@@Ebikemotorcentre interesting thanks. Got mine now, hopefully will last otherwise it'll be coming your way one day
Hola, muchas gracias por el vídeo, me ha encantado, ¿donde puedo comprar los repuestos del lado derecho? 😅
Hola,
por favor visite nuestro sitio para un socio cerca de usted. www.ebikemotorcentre.com/where-to-buy/ gracias
@@Ebikemotorcentre muchas gracias
Hello, where did you buy one of these bearing pullers? by 36.30
36:30 is the end of the video?
Dear people, what is the cause of the ticking or clicking noise I here when putting some pressure on the pedals? Its obviously produced in the crankshaft though.
I can’t believe that there isn’t any seals on the ends of the shafts to stop water and dirt from entering the bearings. Or did I miss something ?
No, you spotted the issue :) This is why we supply the MudStop and crankshaft seal to help keep water and debris out of the motor.
Good day, I am writing from Ukraine through a translator. I have one question, I have a bosh gen 2 performens lain CX motor, I found a small shat on both sides of the shaft. Like an ordinary one, when the carriage is broken a little. Is it necessary to dismantle the motor to replace the bearings?
Привіт, будь ласка, використовуйте кращий перекладач. Я не можу зрозуміти, про що ви запитуєте.
Hi Pete, I have a Bosch Performance Line CX, and a few days ago it began to make a noise, mostly on emtb o turbo mode but only at climbing.... Similar to a coffee grinder. How can I know the kind of bearings or kit I need to replace? Thanks a lot
The “coffee grinder” noise is usually the first sign that the main motor bearing is failing. As your bike is 2018, it should be covered under warranty. As your bearing has failed so soon, this normally points to an issue with water getting into the bearing?
This maybe from a deep-water crossing, hosing/pressure washing the bike around the crank area etc.
You can normally confirm if it is only the main motor bearing by removing the chain from the front sprocket and turning the pedals. You will hear the bearing while pedalling forward, when you pedal backwards, you are then listening to the crankshaft bearings.
Either way, if this is something you want to fix yourself, I would leave the motor in the bike, remove the right hand crank arm and sprocket, remove any plastic motor covers and then remove the right-hand motor cover, you will then be able to see and feel all the bearings and ensure you get what you need.
Or, you can send your motor to us for repair.
I hope this answers your question?
I have an electric bike with a small hub motor which had nylon pinion gears which I swopped out for metal ones . cost 30 euros ..... no other problems with bearing or anything in nearly five years...... this Bosch unit seems ridiculously complicated and the repair looks seriously expensive ........ very glad I don't have one !!....... How much was it ?????????
A few years off road, through rivers dust, dirt, over rocks and tree roots and constant cleaning. Not to mention climbing 1 in 2 gradients, pedal strikes etc. I reckon they do alright.
At minute 9.00, are red and white cables referring to +ve and -ve of 24Vdc motor terminal?
No, this is a three phase 36V motor, so the red, white and green cables are all +ve
@@Ebikemotorcentre TQ for that, it is a BLDC motor, now can see the green cable hidden behind there
I have an active line plus motor and the teeth on the plastic gear broke off. I can't find a rebuild kit for my motor. Do you think it is possible to separate the plastic part from the aluminum center part for replacement?
It is not possible to remove the plastic gear from the boss without damage. We do sometimes get good condition gears for sale, but they are rare. Have you spoken with our German partner www.ebike-doktor.de he maybe able to help?
Nice job
Great vid, but IMO it's quite shocking that tiny electric circuits and chips are that close to gears and grease - with no cover or protection.
Ty
Nice vid, is it possible to order spare parts for the engine?
I need the part shown at 16:50 but i can not find it.
No parts are currently available for this motor :( Is your part actually broken!?
@@Ebikemotorcentre thx for the fast reply.
The metal gearring tooths are completely worn out.. (the one in 16:53)
They can not fix it at my local bike shop and bosh doe not sell those parts.. so i hoped i could find it somewhere on the internet. (sorry for my bad English)
Contact me through my website Orson, I may have a solution or fix for you.
@@orsoncools3279 I heard on another video that Bosch has made a commitment to have parts available for at least 5 years after production ends on any motor....what a load of BS!
Great video , what type of grease is used ?
We use Bosch Drive Unit Grease inside the motor and Bosch Long Life "Tacky" Grease outside the motor. You can see these here: www.ebikemotorcentre.com/bosch-gen-2/
Great video. Would one use marine grease due to water issues ??
No, would not help and would be wrong for plastic gears etc. Trust me, we have been down this road :)
Thanks..will be careful washing my bike in the future....
Espectacular!
Hi Pete just fitted one of you right hand bearing kits thank you for the quick delivery, I am also going to order a left hand crank arm drive bearing from you for my other bike, question for you why don't you unplug the torque sensor out of interest and just have it hanging loose.
Cheers pal
I think that every time I watch it :)
Hi, what about the Silicon Sealing? Is there a way to seal the motor after this process? removed @ 01:08
There is a thin silicone gasket seal between the cover and the motor that will normally come away intact. If it's undamaged, it can be re-used. Obviously, if damage to this gasket has occurred, a thin film of silicone gasket sealant can be used to re-seal the motor.
@@Ebikemotorcentre THX
Dear Bosch, how do we prevent from the dampf? Idea , put some zeolite in the casing!
Good idea, but I am guessing you would not want to strip your motor every week to dry the Zeolite out.
@@Ebikemotorcentre self drying by pedalling action?
@@Mindsi But it would be inside an enclosed space, so as the Zeolite dried, the moisture would condensate out, inside the motor again. Time for plan 'B' maybe.
@@Ebikemotorcentre Well get the ‘ Tefal heads’ to work it out!
@@Mindsi Now you're showing your age 😂👍
Good day I'm with Ukraine I'm writing through a translator. I have one question motor bosh gen 2 Performens Lain CX there is a slight wobble on both sides of the shaft. The carriage is slightly broken. Do I have to dismantle the motor in order to replace the bearings?
Yes, the motor will have to be dismantled and if there is already movement on the shaft, the damage inside may not be good.
Thanks
Did you use any grease on the gears?
We use a very specific gear grease for combinations of plastic and metal gears. You can find it on our site here: www.performancelinebearings.com/product/gear-grease-for-ebike-motors/
@@Ebikemotorcentre Great, I did not see you add any grease to the gears in this video
I grease the gears at 27.30 in the video :)
Hello whats the problem can be when i spin pedals chain is not moving or barley moving when no resistence
If you are spinning the pedals backwards, this is normal. If you are spinning the pedals forwards, look at the aluminium boss that the front sprocket is attached to. This can wear and allow the motor to spin without turning the sprocket and chain.
Pete, I wish I'd paid for you to change my bearings rather than doing the warranty repair which took six weeks under lock down. However I now have another 2 years warranty. I'm guessing you couldn't match that? Or could you?
We give 12 months on all our parts, labour and workmanship so no, although we will always look after a customer as much as possible if they are outside this time.
@@Ebikemotorcentre Thanks, that's very reassuring. I think you are doing a brilliant engineering job with those rebuilds. It's a shame Bosch don't let you do their UK warranty repairs. That would save time and help your business.
is there a difference between the 65 Nm, 75 Nm and 85Nm versions?? Would the BDU2xx drive unit work on all of them??
This is always easier to answer with pictures, you should find the answer to this question here: www.ebikemotorcentre.com/frequently-asked-questions-answers/#Bosch-Motor-Questions
i really thought you would have put a small bit of grease on those gears before you installed. Is there a reason you didnt?
If you watch closely I do grease the gears. Unfortunately, back when I did this video the right grease was hard to come by, so I used an alternative that is not easy to see. Also, you only grease the largest gear of any gear couple, otherwise you end up with grease everywhere once it has squeezed from the teeth.
I grease the crankshaft gear, the freewheel gear, the smallest plastic drive gear and if removed, the large plastic drive gear. This then covers every gear in the motor.
@@Ebikemotorcentre Clever trick, duly noted :)
THANK YOU FOR THIS INTERESTING LESSONS 😊what are the cost for Sevice the Cx Motor??
Please contact us by email for latest prices. enquiries@performancelinebearings.com
Hi Pete, I took my outer cover off and the central spindle and gears stayed attached to the main body. Any solution to pulling this off without damaging the nylon gears? Thanks Rob
Managed it. Its really buggered!
@@multiclimb The cheapest easies way to repair your motor would be to fit a Bosch service kit, it will give you all the parts you need for that side of the motor. If the rest of the motor is bad, use our service kit + www.performancelinebearings.com/product/bosch-motor-service-repair-kit/
Please do a overhaul on the bafang m400 motor
Im stuck with going for a bike with either a Bosch motor or a Brose, i need reliability and 20mph
Do your research, I am sure you would be happy with either one. All UK bikes are restricted to 15mph though. You would need to fit a de-restrictor (illegal in the UK)
1200Pete i have and Brose lets motor smooth change when reach above 15.5 but Bosch is sudden
Yes, the Brose has a free wheel drive that lets you pedal without turning the electric motor. The Bosch drive is geared so each turn of the pedals equals 2.5 turns of the crankshaft, this makes it hard work.
The Bosch feels like it hit pocket of sand when max assist speed is reached. As this is exactly the speed range you want to commute at I find this disconcerting and it takes all the fun out of it for me. Legal consequences of derestrcting are not to be sneezed at, mind you.
First to add to the many other thanks, I really appreciate you making this video! :)
I have an old motor that I am attempting to overhaul, and I have seen a few other videos. In a couple of the videos they say that we shouldn't touch the shaft of the main drive gear that sits inside the cover, but they don't say why not. And I see that you do touch it when removing the needle rolling bearing inside. Is there something I should do extra after touching it to make sure it works properly after reinstalling it?
Don't worry, Bosch only put this in their instructions to ensure this part was not touched by dirty fingers. As long as this part was clean when the motor goes back together it will be fine.
@@Ebikemotorcentre Danke für die schnelle Anstwort! 😀
Thank you for this detailed video. Where did you get the bearings? Heiko
We had some manufactured because although they have a standard designation number, they are not a standard size! If you need bearings for your Bosch motor, check out our website www.performancelinebearings.com
Have U ever heard a carpal tunnel
Please don't hit anything with your hands use a hammer or a long pipe to get the required torque
Thank you very much for the video