How To: Whirlpool/KitchenAid/Maytag Agitator Assembly WP22004042
HTML-код
- Опубликовано: 11 авг 2014
- How To Replace: Whirlpool/KitchenAid/Maytag Agitator Assembly WP22004042 www.appliancepartspros.com/whi...
For a full article, please visit: www.appliancepartspros.com/b/...
Symptoms: Washing machine won’t agitate, there’s a weird shaking or movement during use, or there’s an odd sound during operation.
Tools: ratchet, 1/2” socket, an extension.
This Whirlpool/KitchenAid/Maytag made Washer Agitator Assembly replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: 22004042, 22002735, 22003383, 22003518, 22003885.
Buy the new Washer Agitator Assembly WP22004042 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Why people make this 123 video, with everything working like a clock...bullcrap, the bolt on the bottom won't get loose unless someone is holding the drum in place to preventing from spinning, and even after you take the bolt out (wasn't 1/2" was 3/8" by the way) the agitator wont come out, until you bang the darn thing with rubber mallot, and then it may finally it will get loose and come out. Not a five minus job by all means, and that is why this videos are important, it shows everything you will have to do, not just the final product...
My agitator was really stuck. Even tried a gear puller with webbing straps. No luck. Here's what worked for me: After removing the center bolt, I poured a couple tablespoons of vinegar down the bolt hole where the agitator meets the spline. I waited an hour or two so that any calcium and rust deposits that are holding the agitator to the spline react and dissolve. Then I tried lifting out the agitator along with short forward and backward jerks. Worked for my Maytag MVWC565FW0 High Efficiency washer.
NEVER buy Maytag again Agitator eats my bedsheets. Never occured on last washer I owned
I broke the agitator plate off. But the gear is stuck in the shaft. I ridded a pull system and pull it with my truck and now the washing machine is hanging. You guy make it look easy to get it off, there no way my washer is hanging mid air with a wash plate gear. How would u get it off to replace the wash plate?
I all show it so easy
You make it look cartoonishly easy. It's not
I tried with ratchet counter clockwise and it keeps turning and agitator will not come off. Any advice? Thx.
If agitator won't cone off splines then what..??
Tried replacing mine today, but it looks like the replacement has a piece of hard, clear plastic covering the hole for the bolt. Any thoughts?
Outstanding. Very well presented.
It's 2 am and your video just helped me and I wanted to say thank you!
Thanks so much for the video. We fixed our washer!!!!!
Thx ! This just saved me $240
You guys have any videos on replacing a tub seal and bearing on this particular washer? (Maytag Atlantis; our is leaking water and makes an awful roaring noise during spin cycle)
Thank you VERY much for your video! I greatly appreciate it!
I love how the bolt comes right out. Mine had lock-tite on it. It came out very hard the whole way.
I have a Maytag Top Loader Glass Top washer. This model doesn't have an agitator in it, spins from the bottom and moves the clothes around during the cycle. I would like to install an agitator for a more thorough washing. Is it possible to reinvent the wheel with the model that I have?
Thank you sir
I have a Maytag washing machine, model # LAT4916AAE : It's got alot of gunk that is getting on the clothes that comes out of the machine, after its done the wash cycle.
My Maytag is less than a year old but it just started grinding on spin. Will this be that agitator you removed?