Looking forward to following the build. I've also been looking at this frame. It's going to be really interesting to see the process you go through to get this road legal.
You aint gonna pedal that fella.Single motor gear with a tension arm is all thats needed tbh.Over build it coz it will save you lots next time round lol
@@GrahamDavidYT I just tryed and close the axle they close pretty easily just tight till it tight enough really but for extra safety I going to add torque arm on both side
Hello friend, I am from Chile, a query, the Stealth bomber enduro e bike frame where you bought it, on some Chinese page. And what a link. And the frame serves for Wheel rim 26
@@paquitortiz the zoom fork has no rebound damping I think (Without rebound damping, the spring will re-extend too quickly, sometimes even further than its starting length. This is what causes oscillations - that wallowing or pogoing (pumping up and down) motion. )
Hi mate, looking good 👍 I'm just sorting my own conversion but I'm having trouble with my battery pack, due to budget issues im using a 20ah 14s pack with recycled 18650 cells, really like the look of those cells you have used 👍 what are they again? The size and shape looks a lot easier to use! Cheers Dave
Hey, they are called EIG cells. Very easy to find on eBay at the moment for roughly £13 a cell. I was initially going to build my own battery pack with 18650 cells but it was a lot simpler and safer to use EIG instead. For the size, they literally fit inside the frame with about 1mm of space on each side.
hello, beautiful bike, I'm putting together this one of yours. But I'm having trouble making connections from the controller. My controller looks like it was wrong. The seller does not answer my question (Aliexpress).
Have you had any issues with the plod riding this on the road? I see alot of ebikes on the roads, usually don't look quite as big as these but as long as riding sensibly I wouldn't have thought I'd get many issues?
I decided to take the Legal route for riding this on the road due to its size, so its getting prepared for an MSVA test then it will be taxed and insured. I dont want to risk having it taken from me by PC Plod. Some people get away with it for years but then one day the inevitable happens.
Hello I have the same exact frame I put the rear hub motor / rim on and it seems like the swing arm is too wide by about an inch just wondering if you had the same problem wondering if you had to use spacers on the rear axle.
@@RascalTech yeah I was thinking of that or using spacers but I need to wait for my brakes I need to see where those end up before I start moving things
Im building the same frame it always blows my mind when I see those 7speeds on these 🚲 i have a 5000w and can only fital a single speed but my thinking is who the hell is pedaling these things so why add the extra parts nice build brother ride on
You have to remember if there’s a big fault, like battery fail and your miles from home, wishing there were more gears to choose from on those massive hills, Yeah too late didn’t think about that😅
i have the same frame and was a little worried about the rear drop out size compared to my hub motor. did you just tighten yours down to fit? i just want to know before i tighten mines down too far and break it or something lol. i cant get the disk brake on without tightening the nut tighter but im too nervous to try lol. what did you do?
At the moment I still have a gap. I tried to tighten it down with a minimal amount of washers but the bracket did not align parallel to the rear hub. So im currently considering a few options at the moment, and the last resort is a sledge hammer.
@@RascalTech i got mines alligned. i just saw another video with a guy with the same frame as ours and he just had some washers that came with the caliper (to the looks of it) on attached the the bike frame instead of the caliper with longer screws to hold everything in place. if you can visualize that. i might just get another disc brake adapter and just put them side by side with the longer bolts for extra sturdiness besides the washers. but yeah i just did what he did and tightened the bolts on the hub motor a little more to close the gap just a little bit more (not too far with the longer bolts and washers) and it spins good with the disc brake on. here is the video of where i saw this. couldnt find the video lol but here is something similar. you can see he just has longer bolts and nut as spacers/washers @ 2:39 ruclips.net/video/YXgD2moMZJc/видео.html
Got any links for the parts you bought? I've got the Mt420 calipers front and back but just wondering what I'll need to get the moto lever to work with them. Any help is appreciated thanks 😊
Hey Man I have same frame... U need to install the star nut into the steerer tube... then tighten the cap otherwise your headset is gonnna come undone. Zoom forks have to be replaced soon cuz they are dangerous... I did the dnmusd8 they are awesome. Do U have an Instagram? We could swap tips I have quite a few
The wheels where ordered custom when I purchased the rear hub motor through Alibaba. If you are interested I can send you the contact details for the supplier. From what I have learned though, is that the rim size I went for made it very hard to source road legal tyres.
Gears are not required but it would be nice to have useable gears on the rear, I tried a single speed setup but I wasn't a huge fan of it when I went for a test ride.
Awesome Vid Dude..!👌Sub'D😎I,v just ordered this frame,I'll get it this friday..But im not sure what size back wheel to get?is a 26" to big for this frame? 🤔
The tyres are 24x3,0 . But they will be getting removed as they wont pass a UK MSVA test. They were fitted with the motor+wheel combo I sourced from Alibaba.
Cheers I will take a look. So far not much more has been done to the bike whilst I sort out my garage. My summer house is nearly built now so I finally have the space back to continue the build.
@@RascalTech Greetz Bruh, SEAT. if your like me? you will see the potential. I can weld, but dont know if that is something you can or cant sort your end? Other colours available. vI recon a 2nd hand seat will go for around £10 - £20. from a bike salvage breakers via ebay, www.ebay.co.uk/itm/HONDA-CRF450-2018-4-STROKE-MOTORCROSS-BIKE-NICE-CLEAN-1-OWNER-BIKE/254749586400?hash=item3b504233e0:g:sSEAAOSwSDNfiFPZ
The swing arm dropout was roughly 185mm, with the complete rear wheel being 135mm. With spacers I would really struggle to get disk brake fitted correctly. I will be covering this issue and possible solutions in my next video.
You could possibly fit a mid drive motor, but for something of this weight you would really want at least 4kw for it to be any good. So that would potentially throw the common Bafang mid drives out the window. Something like the CYC 3kw to 5kw mid drive could work with some modification, but I would honestly just go for a Rear hub motor and have some proper fun !
@@alireza071 I was also building a summerhouse in my garden at the same time, which eventually took up all my spare time and my garage was also full up materials for the build. Its nearly done now so I will have time to carry on with the E-bike build.
hunterbobby2020@gmail.com please email me the motor you purchased it would be seriously appreciated as I've got same frame cant find motor anyways please send link
When I was last out riding this something caused the power to cut. At that moment I then realised how heavy the bike actually is with the steel frame 😂
@@RascalTech you need a forklift to follow behide 😂😂 I’ve got a mid drive thing now with pedalling and the right gear you can get mad speeds, if you want to cruse along just change gear 😉
@@robz8989 Nicee man, I was looking to fit a mid drive to my latest bike build but I opted for a 1000w rear hub motor instead. For a pedal bike it’s a ripper 🔥.
@@RascalTech mid drive all the way for me the real wheels can bounce out if not Anchored both sides good happen to me once and wrote the wheel off, you can get 1000w mid drives but the 48v 750w with pedalling in the correct gear you can get some high speed over 40mph
always save the packaging you can re use it add it to the battery to protect it
Nice bike, look forward to the finished build. 👍😎
Good job
Looking forward to following the build. I've also been looking at this frame. It's going to be really interesting to see the process you go through to get this road legal.
So far I have the new VIN from DVLA, im currently trying to find a garage that can stamp it onto the frame and sign some paperwork for me.
@@RascalTech hi
how much will it cost to road legal this bike mate can u advice what steps u had to take pls
@@alireza071 Making the bike road legal shouldnt be to expensive as ive bought parts with this in mind. Hopefully everything is done for under £2000.
I have the same frame I like the white my first ebike was white also 👍👍😁
White is a good choice !
nice one
I have the same frame and forks I'm still building mine.
How are you getting on with your build ?
@@RascalTech slow 😂
you need to cut the bottem of the seat bar its gonna be slaming into ur frame or the shock
You aint gonna pedal that fella.Single motor gear with a tension arm is all thats needed tbh.Over build it coz it will save you lots next time round lol
Im going to get a single speed tensioner ordered.
you can pedal that at a slow pace i have one
Hi can were can I get some longer rear gear cable from just wasted £8 from halfords to short
Hi mate did u manage to close up the rear drop out to fit ur rear hub in?
You just have to buy some washers from your local hardware store. That what I had to do when I built mine.
@@GrahamDavidYT I just tryed and close the axle they close pretty easily just tight till it tight enough really but for extra safety I going to add torque arm on both side
Link for the Braking system setup please..I need it badly please.
Why don't you make a 2 wheel drive E bike one more motor in front.
Its a great idea but a bit impractical for a bike like this. I have built a 2wd 700w e-scooter though.
Iv always thought about that 2WD would Help in Rough Terrain 😈
@@SuperiorNo1 Agreed, 2WD in rough terrain would be epic.
Top
Is a technical drawing available? I would like to build it.
Hello friend, I am from Chile, a query, the Stealth bomber enduro e bike frame where you bought it, on some Chinese page. And what a link. And the frame serves for Wheel rim 26
Check out this video . ruclips.net/video/u_6pwon18rY/видео.html
if I take one I have to register it in uk? I am 15 years old
I'm 12 and I got one just run away
Same frame just in black
you have to change the front zoom fork , trust me
Im going to be purchasing some DNM USD-8's soon.
why
@@paquitortiz the zoom fork has no rebound damping I think (Without rebound damping, the spring will re-extend too quickly, sometimes even further than its starting length. This is what causes oscillations - that wallowing or pogoing (pumping up and down) motion. )
m.ruclips.net/video/0wkUQyvYVzw/видео.html
@@FloKTC Thanks for posting, I really appreciate the help !
When you got that cell replaced and went from 15s to 16s how did you re-wire your packs, did you go from 3-5s packs to 4-4s packs?
Hey, I put them all together as a 16s pack once my BMS arrived. Check out the build video here. ruclips.net/video/dEcwxEti9KM/видео.html
Will a u004 triangle battery fit in this I got a 52v 1000w
The tire size is 18inch motorcycle wheel?
20 Inch motorcycle wheel.
What is the right rear stock for sleath bomber frame do I need 190mm 61mm travel?
Hello if you don't mind me asking how long is the rear shock is that 200 mm? And also are you using 19-in motorcycle wheels?
The rear shock is a DNM RCP-2S 200mm. I stupidly went for a set of 24 inch bicycle rims.
@@RascalTechthank you, nothing wrong with 24-in rims!
Hi mate, looking good 👍 I'm just sorting my own conversion but I'm having trouble with my battery pack, due to budget issues im using a 20ah 14s pack with recycled 18650 cells, really like the look of those cells you have used 👍 what are they again? The size and shape looks a lot easier to use!
Cheers Dave
Hey, they are called EIG cells. Very easy to find on eBay at the moment for roughly £13 a cell. I was initially going to build my own battery pack with 18650 cells but it was a lot simpler and safer to use EIG instead.
For the size, they literally fit inside the frame with about 1mm of space on each side.
hello, beautiful bike, I'm putting together this one of yours. But I'm having trouble making connections from the controller. My controller looks like it was wrong. The seller does not answer my question (Aliexpress).
Have you had any issues with the plod riding this on the road? I see alot of ebikes on the roads, usually don't look quite as big as these but as long as riding sensibly I wouldn't have thought I'd get many issues?
I decided to take the Legal route for riding this on the road due to its size, so its getting prepared for an MSVA test then it will be taxed and insured. I dont want to risk having it taken from me by PC Plod. Some people get away with it for years but then one day the inevitable happens.
@@RascalTech have you found someone that will insure you?
where I buy the picture on which page in AliExpress or another.
Check out this video. ruclips.net/video/u_6pwon18rY/видео.html
whats a quid?
Hello I have the same exact frame I put the rear hub motor / rim on and it seems like the swing arm is too wide by about an inch just wondering if you had the same problem wondering if you had to use spacers on the rear axle.
Yeah I also ran into the same issue. I am going to try and modify the rear swingarm and close the gap.
@@RascalTech yeah I was thinking of that or using spacers but I need to wait for my brakes I need to see where those end up before I start moving things
where did you get the front wheel from
Hey mate nice build! I'm doing a very similar one using the same and cells but pushing a bit more power (8000w) of you want to check it out.
Thanks , ill check it out !
I want to upgrade my controller and battery to do 8000w
Hi very nice vid! Can you please drop link for Shimano 7 speed rear cassette? Thank you so much. :)
Hey, the 7 speed rear cassette come with the motor kit but it can easily be sourced online.
Im building the same frame it always blows my mind when I see those 7speeds on these 🚲 i have a 5000w and can only fital a single speed but my thinking is who the hell is pedaling these things so why add the extra parts nice build brother ride on
You have to remember if there’s a big fault, like battery fail and your miles from home, wishing there were more gears to choose from on those massive hills, Yeah too late didn’t think about that😅
Same frame will take 3speeds with 5000 watt motor.
yeah if you had a situation where you HAD to peddle it... they'll be damn nice to have... and for the $50? worth it
i have the same frame and was a little worried about the rear drop out size compared to my hub motor. did you just tighten yours down to fit? i just want to know before i tighten mines down too far and break it or something lol. i cant get the disk brake on without tightening the nut tighter but im too nervous to try lol. what did you do?
At the moment I still have a gap. I tried to tighten it down with a minimal amount of washers but the bracket did not align parallel to the rear hub. So im currently considering a few options at the moment, and the last resort is a sledge hammer.
@@RascalTech i got mines alligned. i just saw another video with a guy with the same frame as ours and he just had some washers that came with the caliper (to the looks of it) on attached the the bike frame instead of the caliper with longer screws to hold everything in place. if you can visualize that. i might just get another disc brake adapter and just put them side by side with the longer bolts for extra sturdiness besides the washers. but yeah i just did what he did and tightened the bolts on the hub motor a little more to close the gap just a little bit more (not too far with the longer bolts and washers) and it spins good with the disc brake on.
here is the video of where i saw this.
couldnt find the video lol but here is something similar. you can see he just has longer bolts and nut as spacers/washers
@ 2:39
ruclips.net/video/YXgD2moMZJc/видео.html
the other guy i saw had the same frame though. used a similar technique
Hi mate I've gone same way with my brakes Ive nearly finished it I know the part you need if you still not found it
Got any links for the parts you bought? I've got the Mt420 calipers front and back but just wondering what I'll need to get the moto lever to work with them. Any help is appreciated thanks 😊
can you put the parts you bought the site
did you buy the front wheel fork and handle bar separately ?
The front forks were purchased through Alibaba, the handlebars were purchased from eBay.
No zoom fork is made for downhill.
Hell, they even tell you 'light trail use'.
Very true, I think it just refers to the style of fork. I definitely wouldn't use these for off-roading anytime soon.
@@RascalTech
Yeah. You have to just be careful with those.
Though, I'm overly paranoid with my Boxxer. Primarily because of the cost to fix it.
@@RascalTech
Oh, I do have a question about the frame. How close does the key come to your fork stanchions?
Hey Man I have same frame... U need to install the star nut into the steerer tube... then tighten the cap otherwise your headset is gonnna come undone. Zoom forks have to be replaced soon cuz they are dangerous... I did the dnmusd8 they are awesome. Do U have an Instagram? We could swap tips I have quite a few
Thanks for the useful info ! Yeah my insta is @rascal_tech .
Where do u get them wheels?
The wheels where ordered custom when I purchased the rear hub motor through Alibaba. If you are interested I can send you the contact details for the supplier.
From what I have learned though, is that the rim size I went for made it very hard to source road legal tyres.
What fluid are putting for the heat
I will be putting Ferrofluid and hub heatsinks onto the rear motor when I eventually increase the power.
Do you need gears for msva im pretty sure you don't need them
Gears are not required but it would be nice to have useable gears on the rear, I tried a single speed setup but I wasn't a huge fan of it when I went for a test ride.
police are fine in my area as long as does no more than 15.5 moh with pas sensor ..
Did you find someone to insure you ?
Hey, not yet. I believe Andy Kirby managed to find someone to get insured with though. If I can find the video I will link it below.
Awesome Vid Dude..!👌Sub'D😎I,v just ordered this frame,I'll get it this friday..But im not sure what size back wheel to get?is a 26" to big for this frame? 🤔
Nice man I hope the build goes well for you ! I would say 26 inch including the tyre is about a big as I would go on this frame.
@@RascalTech Cool..so it would work ok..Cheers Dude😎
Hi mate what size rear shock did you use..I ordered a DNM 240mm last night But i'm thinking it might be too long🤔
Where did you get your tires and what size are they
The tyres are 24x3,0 . But they will be getting removed as they wont pass a UK MSVA test.
They were fitted with the motor+wheel combo I sourced from Alibaba.
can you send me the link for the battery cells you used?
Search eBay for - Eig cells
Bruh Look at Lad i& margaret channel, His batteries only take 40 minutes to fully charged. How far have you come with your bike to date?
Cheers I will take a look. So far not much more has been done to the bike whilst I sort out my garage. My summer house is nearly built now so I finally have the space back to continue the build.
@@RascalTech Greetz Bruh, SEAT. if your like me? you will see the potential. I can weld, but dont know if that is something you can or cant sort your end? Other colours available. vI recon a 2nd hand seat will go for around £10 - £20. from a bike salvage breakers via ebay, www.ebay.co.uk/itm/HONDA-CRF450-2018-4-STROKE-MOTORCROSS-BIKE-NICE-CLEAN-1-OWNER-BIKE/254749586400?hash=item3b504233e0:g:sSEAAOSwSDNfiFPZ
what was the drop out size of your rear wheel and did you need any spacers
The swing arm dropout was roughly 185mm, with the complete rear wheel being 135mm. With spacers I would really struggle to get disk brake fitted correctly. I will be covering this issue and possible solutions in my next video.
the pedal assist doesnt work on sabvaton either you need to hack it to get it to function
How much did it cost you to build one?
In total it will be roughly £1800 - £2000 when complete.
hey mate, just wondering is you could put a midrive motor on the frame? Thanks
You could possibly fit a mid drive motor, but for something of this weight you would really want at least 4kw for it to be any good. So that would potentially throw the common Bafang mid drives out the window. Something like the CYC 3kw to 5kw mid drive could work with some modification, but I would honestly just go for a Rear hub motor and have some proper fun !
How did you get on with registering it ?
Im still looking for a garage that can stamp the VIN number onto the chassis.
How much did it cost to complete the custom bike ?
Overall the build will probably cost about £2000 including DVLA fee's.
@@RascalTech ok thankyou
Have u finished the build mate!
Not yet, I will be back on with the build soon.
@@RascalTech wow that's take a lot of time are u still waiting for parts or something?
@@alireza071 I was also building a summerhouse in my garden at the same time, which eventually took up all my spare time and my garage was also full up materials for the build. Its nearly done now so I will have time to carry on with the E-bike build.
Any updates on this? Did you manage to get it registered?
Nothing new yet, the project had been put aside for a few months, the new workshop has been sorted out now so I can carry on with the build soon.
what size is your shock?
200mm
Lol…I over paid on Amazon for $360 but it came fast.
Can you post links you ordered from?
Send me an email and Ill PM you the links.
Rascal Tech what’s your email?
@@Eric-zz8rm Info@rascaltech.co.uk
hunterbobby2020@gmail.com please email me the motor you purchased it would be seriously appreciated as I've got same frame cant find motor anyways please send link
That's the clone?
Yes, this is the clone frame from china.
It's very nice. I have a better design.
That's great, can you send me info of your design ?
I’ve got one of these frames chucked in a cupboard 😂 it’s to much of a tank for me I paid £175
When I was last out riding this something caused the power to cut. At that moment I then realised how heavy the bike actually is with the steel frame 😂
@@RascalTech you need a forklift to follow behide 😂😂 I’ve got a mid drive thing now with pedalling and the right gear you can get mad speeds, if you want to cruse along just change gear 😉
@@robz8989 Nicee man, I was looking to fit a mid drive to my latest bike build but I opted for a 1000w rear hub motor instead. For a pedal bike it’s a ripper 🔥.
@@RascalTech mid drive all the way for me the real wheels can bounce out if not Anchored both sides good happen to me once and wrote the wheel off, you can get 1000w mid drives but the 48v 750w with pedalling in the correct gear you can get some high speed over 40mph
Olá ,,
What mirrors are those thanks
www.ebay.co.uk/itm/373049020761