i have an issue , when i click on Router or Switch it show me a message "configure is locked by author's design for this activity" . I connect all circuits like you so why this issue coming . please answer me fast and give me solution i have little time to submit my assessment.please
How do I move routers and switches from shelf to table? every time i click it it keeps displaying a message saying it cannot due to all tabs interfaces are hidden?
My switch terminal is not opening, it is say that configure is locked by authors design for this activity, can you please reply what to do now im in middle of my exam
hello Subham I saw this topology is different from the one check in another video,, " ccna 2 srwe final pt skills assessment (ptsa) answers v7.00 & v7.02",,,,,where there were one router two swictches and two PC........which topology would show up in test,,,,,can you please check and tell me.
Thank you for this great video! But I have a problem, when I load the exam, I was in "guest" mode, and when trying to configure the switch, it says "Configure is locked by author's design for this activity", how do I disable it?
What exactly you did?. If you mean configuring the router, then you can simply copy and paste the whole code again it will work fine. Same incase of switch.
Bruh, someone tell me why i got a 17% and then a week after, i got a 20%? Unless i really HAVE to put that blue cable, everything else should be able to get around 70 or something
thank you very much friend you saved me the semester of my networking subject :D
Your welcome 😊
No entendí por el idioma pero viendo lo que hacía me fue súper bien , buen video 🎉
una pregunta donde hallo los comandos para poder poner por servicio
god bless your soul you helped my grade boost 8-10%
Glad it was helpful ☺️
Obrigado cara, estou fazendo o curso e estava com muita dificuldade nisso, muito obrigado.
you saved us all sir
thankyou so much
Hey man, you are really good and you explained everything in a very friendly way. Regards
Okay, man I love you. Not even kidding, couldnt get a point without you.
Is this the final one or there is another exam after that?
Thank you so much, this saved my credits, it has been measured 172.16.1.0 work
I have realy 100 points
Thank you for the video
Thank you so much for this video!!🙌🏿❤️ It was super quick and easy to understand
i have an issue , when i click on Router or Switch it show me a message "configure is locked by author's design for this activity" . I connect all circuits like you so why this issue coming . please answer me fast and give me solution i have little time to submit my assessment.please
connect with console
I followed this video to a T and got a 55%. Something ain't right and I had Version 1.
Thank you for saving my times before finals. You're great!
Is this the only practical exam that exist?
I've got 100 % thanks to your explanation ❤
Can you help me solving in that
Thank you SO MUCH!! Amazing and easy to follow video saved my semester! :D
Your Welcome 😊
Thanks alot for this video I scored 100% thanks
☺️Good to know that
best tutor ever!!
You are the best bro, thanks for your help
Your Welcome 😊
thank you so much u really help me to pass this exam
Your welcome
Thank you
From the other side of the world 👍
How do I move routers and switches from shelf to table? every time i click it it keeps displaying a message saying it cannot due to all tabs interfaces are hidden?
My switch terminal is not opening, it is say that configure is locked by authors design for this activity, can you please reply what to do now im in middle of my exam
Connect console port at back of switch to other pc with a wire
@@Sunny2078 how, plz describe...
How did u solve that issue?
I am getting the same issue as well
Right click on the Switch click "inspect rear" and plug console plug to console port, hope this helped.
I had already presented it but it did not pass the exam. Thank you. Tomorrow I will present it again since I do not want to go to high school yet.
I just wanna thank you for your assistance. Stay bless my friend.
Glad it was helpful ☺️
you really saved my course thank you very much bro ☆
you are the best, thanks VERY MUCH from russia
thank you so much you are networking god
bless you! I got 100%
dude you are amazing ı am from turkey and ı am a student of bca in india and ı can tell you that you are teaching better than the whole team of cisco
agreed 👍
thank you so much for all your videos my friend!!:)
Many blessings!
You are amazing dude thank you
Thanks bro I got 100%
thankyou so much, it's works!!!!
Network Security ( Version 1) - Network Security Final PT Skills Assessment (PTSA)
thanks, you help me alot . +1 repsect for u mah men
Your welcome
Life saver!
Thanks for your assistance!
sir the packet tracer is not opening for me.... what to do
Perfect perfect!
Thank you very much! ♥
By clicking on switch and router in first step it is showing error what I should do
Not work," Configure is locked by author's design for this Activity "
Marvelous
Thank you SO MUCH!!
Your welcome ☺️
thankyou very much cyber geek
Thanks for subbing!
hello Subham I saw this topology is different from the one check in another video,, " ccna 2 srwe final pt skills assessment (ptsa) answers v7.00 & v7.02",,,,,where there were one router two swictches and two PC........which topology would show up in test,,,,,can you please check and tell me.
6:21 ctrl+shift+insert is not working in my lenovo laptop
Use fn along with them, then it would
Thanks Bro!!
Your welcome
thank u bro u save me
Nice bro,thanks a lot
Your welcome
Qué grande eres amigo!
thank you bro
My switch is not opening it says the Admin can’t has not configured it
in the device where u should plug the cable, right click, inspect reat, and plug it on the console instead, it should work
Thank you for this great video! But I have a problem, when I load the exam, I was in "guest" mode, and when trying to configure the switch, it says "Configure is locked by author's design for this activity", how do I disable it?
Thanks.
How to run run cltl+left shift + insert button on macbook
Have you completed you degree?? and what's the future plan job?? in Cyber sec..
Not next year june I'll get my degree. I have quite few plans, trying for internship in Cisco and later job if lucky😂.
What we have upload in ITN Final Skills Exam (Equipment)?
If I took the ITN practical skills exam in December would it be the same as this?
really cool
thanks bro
Hi, any chance of getting the PT file for exercising?
thx soooooooooooooo much bro
Its not working from switch part!!
Thankyou bro
Your welcome 😊
Not worked at all, january/2025 all steps has been done and i got 41%
Thank you!!!
Welcome!
EU TE AMO INDIANO
EU TE AMO
EU TE AMO
EU TE AMO
hi
I have a different ip and different requirements.
can i do the same what you do ??
My score was 33% :/, but it helped me see some mistakes,I hope to get more percentage next time.
Did you coped every step he said?
2024. When i click on the switch button it shows me configure is locked by author s
did the router and switches pop up for you?
How you solve it bro??
@@princekrjha-cs- in the switch where u should plug the cable, right click, inspect reat, and plug it on the console instead, it should work
Hello, I messed up the part of the PC-A and wrote the wrong text, now everything is gone. Any idea what I can do?
What exactly you did?. If you mean configuring the router, then you can simply copy and paste the whole code again it will work fine. Same incase of switch.
@@CYBERGEEKSQUAD Thanks for replying, it worked and I scored 100%! Thanks! I wonder if there is a video for the practice test PTSA.
Nope haven't made a video on that.
It says the switch is locked what to do now sir
Thank you so much
I'm Glad it was helpful 😊
My terminal and swtich terminals not paste in screen whta i do
Green color?
please upload more videos
I'm been lazy for past couple of years, well I was exploring myself in other domain, soon I'll start posting regularly
In my it is showing password.
which is not working properly .
Please tell which password we have to use
sir can i ask, why my host A and B blank and no commend. pls help
thanks!!!!
Your welcome
What's insert button
Please can you help me with an exercise?
Sir the exam is the same every year? I have this exam next week so it will be the same as this? Thank you
Can't promise but yes it's same always hope you get the same task. 😊
Thx
how to open itn final skill exam on packet tracer please help
in the switch how to and where to paste the code it is saying that configure is locked by author
What should I do when the switch is locked please hurry
why my terminal is blank
EU TE AMO
Bruh, someone tell me why i got a 17% and then a week after, i got a 20%? Unless i really HAVE to put that blue cable, everything else should be able to get around 70 or something
i got 50% can i retake the exam??
EU TE AMO
EU TE AMO
how do you reset the switch if it keeps giving you the password option but you didnt set a password
There not suppose to be any password and even if it's their already pre-configured then it will be mention in the instruction manuals.
thanksss
Your welcome
The switch is locked for me wat should i do
Did u get any idea?
How to zoom and switch on
Network Security 1.0 Final PT Skills Assessment (PTSA) Exam please
bro , my switch , cli cant be open
me too😂
Cool, so does the copy-paste work with any IP address (like 172.16.1.0 or different)?
You can change ip address no issues but make sure range and subnet mask are mention according to IP.
@@CYBERGEEKSQUADhow can I change the ip address