You my friend are an absolute legend, I am a complete stranger to you but you helped me pass my course, I can confidently say I would have failed withour your channel. You've 100% earned all my likes and subscription.
I'm literally terrified because I really wanna get an a so I can just pass this class and move on cause networking is not for me and I think I will just stick to programming 😅
Cisco Introduction class isn't intro at all you have to have some type of knowledge to understand this course if you have no knowledge of networking at all this class will be hard, this course has more reading than it does hands on activites if i wasnt for this channel i wouldn't have graduated college.
Awesome video! Is this the actual final exam? Does the final exam have the completion % and allow you to check assessment items like all the previous packet tracer activities?
Please I would appreciate it if you can clear me on this. You said this is CCNA 1 practice test, what about CCNAV7 ITN practice PT skills assessment PTSA ?
@@TechAcad I know they are in your channel because am a subscriber. I want to know the difference. I know CCNAV7 ITN practice PT skills assessment PTSA is CCNA 1 but am confused what ITN final skill exam is ? Are they both CCNA 1 exams ?
how can i console into two different devices from one computer? currently i have my computer consoled to a switch and router(usb). this is all in packet tracer
You my friend are an absolute legend, I am a complete stranger to you but you helped me pass my course, I can confidently say I would have failed withour your channel. You've 100% earned all my likes and subscription.
Legend!
I really appreciate your work without you I wouldn’t be able to pass my class thank you so much my biggest fan
So nice of you
bro stop capping
god bless this legend for helping me and my friends on this thing. if we did not finish this we wouldnt pass college
Glad it helped!
I sincerely hope that you are doing very well in this life. Thank you very much for this, really.
Thank you! You too!
BRO, YOU´RE AMAZING IPASS MY CLASS OF CISCOWITH YOURHELP AND YOUR VIDEOS.
THANKS
Glad to hear that!
thanks to u i finished my last netacad module exam
I'm literally terrified because I really wanna get an a so I can just pass this class and move on cause networking is not for me and I think I will just stick to programming 😅
Can feel it
Same here
+3
Samsies
Lol me too
Your videos have been inspirational and I hope to see more come. I have subscribed and gave it thumbs up on all the ones I have watched. Thanks.
Awesome, thank you!
thank you bro, I passed this examen with 100%, awesome video!!!
Excellent!
Any idea on how to remove an wrong conection
@@Graymatter707 I usually use for example:
int gig0/0
no ip add
Thanks! Our exam is the same as yours but with different ip and names at this point I just want to finish ccna 1 after that I'll study something else.
책. ㅕ
ㅅ ㅁㄴ울야 조로로
고용)6(£5?7;;)£()
Thank you for uploading this video. I earned a 100% thank you for your help.
Glad it helped
Thank you very much, helping me alot, i got a marathon and cannot end waitout this videos :D
Great to hear!
Do you think it's a good idea to just watch videos like these even if I'm not in this class or section yet?
We kindly request you to learn the basic first! We have many basic videos in our Channel!
Thanks for your great support and sharing!
You are a humble man
Thanks a bunch my dear tutor its excellent keep it up
Glad this helped you out!
God bless you man, you are a life saver. please my questing is, why did you remove the copper cross over cable at the end
much appreciated for the video it makes it easy to understand
Much appreciated tech man, Thank you for the help! 👍
Any time!
Bro, you saved me, thank you so much.
Great video and fantastic mind.
Glad it helped
just scored 100% thank you so much sir
All the best
Thank you very much, I passed the exam thank to you
Keep it up
hi. did you recently take the assessment and was it any different from this one he did?
@@jebuuzz1063 I took it like two months ago and what changed is the IP. The rest of the things were the same
It was a good video but you should have mentioned about the cable change while you were connecting the copper cable not at the end.
Here we need to use Copper Straight-Through Cable to connect all the devices!
Including Router to PC.
Thank you!
Thank you so much Sir
You saved my test
All the best
PTSA type C1, 3rd scenario, should add that in the description or smt
Thank you so much You saved my life once again!
Glad to hear that!
Thanks for the help bro i love u
Glad it helped!
Is this exercise the Cisco CCNA 1 Introduction to Networks V7 Final Exam ?
Cisco Introduction class isn't intro at all you have to have some type of knowledge to understand this course if you have no knowledge of networking at all this class will be hard, this course has more reading than it does hands on activites if i wasnt for this channel i wouldn't have graduated college.
Glad it helped!
I'm Pasa Because Of You.❤❤❤❤
Thank you for your help!
Glad it helped!
What sholud i do when protocol is down in ip interface
Are this version and the srwe version similar?
I was wondering if you have a video of the SRWE LAB?
This is from First Course ITN
If I take my ITN practical skills exam in December will it be this?
I can't access the router
Thank you so much!!!! 🤗🤗❤
did you get same one!?
@@ghaithgaming5626 yes!
Very Good !! I like this video
Glad to hear that!
is it normal that every time i try to configure the router it asks me for the password once and once again?
Can it be abbreviated -deccription connected to by S1fa0/5 to LAN1
thank you
hello, why you used crossover cable to connect a router and a pc and says since they are same device?
This would have been great if you changed the cable from the beginning.
The hardest part of this exam is getting it to boot up properly!
I am unable to open host-A and Switch-B what should I
do now....?
Why is the pc and the router considered the same device. Someone please tell me
Hi how do i restart the terminal switch commands when it time out? Thanks
Que buen video, me sirvió hermano, GRACIAS TOTALES!
Thanks! You helped me a lot!!!!
Glad to hear that!
Can you please do the 2023 of the same scenario pls? The changed the mask here to /27
Thank you a lotttt.......Save my exam
Glad it helped!
ありがとうございます!
とても助かります🙇♂️
優しいね！
You are a legend
i got another exam plz help me, this is not updated
Is this the same itn ptsa final exam or they updated it?
Same, may be some changes in the IP Address!
After opening hostA terminal and entering enable command.. % No password set is coming.. What should I do?
Did u solve the problem
thank you very much for the interesting explanation that mad me understand the way to solve it .mooooore success, Mostafa hamdon - eygypt-assuit
Glad it helped
Thank you very much, because the tutorial you gave really helped me, and I got a pretty good grade. Once again, thank you
Glad I could help!
thanks, thanks , thanks...I would like to have you by exam also...
Any time
For this exam would the IP addresses be any different for me if I open it then shown in the video?
Please what final exam is this ?? Is this CCNA 2 final practical exam ??
No, this is CCNA1, we already have CCNA 2 also!
Fantastic. Thanks 👍
yo, nice work dude
Thanks for the visit
Sir what to do if the status is administratively down
Central-RT(config)# interface gigabitethernet0/0/0
Central-RT(config-if)# no shutdown
Central-RT(config-if)# exit
Central-RT(config)# interface gigabitethernet0/0/1
Central-RT(config-if)# no shutdown
Central-RT(config-if)# exit
Same thing happened but because I forgot to enable using “no shutdown”
@@Adibou-so4nn bro after doing this , pc - b got locked and asking for user access verification password
And I'm not able to type that
obrigado, tirei 100%.
Thank you ☺️
You’re welcome 😊
Configure is locked by authors design for this activity?
The same thing happened to me when I wanted to configure the sw
hey man why is the network address for lan 1 and lan 2 different and can you explain how you figured out the network ip for lan 2?
The video is good but while i was practicing the switch terminal timed out so could not return to continue.
Please re enter into the IOS!
Awesome video! Is this the actual final exam? Does the final exam have the completion % and allow you to check assessment items like all the previous packet tracer activities?
Yes it does!
@@TechAcad Awesome and thanks for the quick reply. Have my PTSA on Friday so this is a huge help.😊
but after submitting this i got only 36% after following each and every step
Hi, great video, great help, thanks!
Is there somme way I can download this packet trace file for later practice?
hi tech acad! why is my terminal in Host-A is blank? :(
May be all the tabs are hidden!
If status of interface is down by administratively so how to do it up😢
You need to give the "no shutdown" command
Nice sir
Thanks and welcome
Hi!, I going to take my exam of ITN Final skills exam this next week. Do you know if the exam have changed? or is the same as this video??
Thank you!!
Yes it will
I have an exam tomorrow
How to add these devices!
I need to practice
Thanku so much
Hi, Do you have link for ghe file where we can see the grading? Thanks☺️
The exam I took had different Network adress and different number of hosts! How does this apply to other scenarios?
Basically the same thing just different subnetting
Hi, can you show me how step by step g.8032 ethernet ring protection on cisco switch/router devices? thanks in advance
Again, after another week, still no response from them at all.
Please I would appreciate it if you can clear me on this. You said this is CCNA 1 practice test, what about CCNAV7 ITN practice PT skills assessment PTSA ?
This is ITN Final Skill Exam! And ITN Practice PT already there in our Channel!!
@@TechAcad I know they are in your channel because am a subscriber. I want to know the difference. I know CCNAV7 ITN practice PT skills assessment PTSA is CCNA 1 but am confused what ITN final skill exam is ? Are they both CCNA 1 exams ?
how can i console into two different devices from one computer? currently i have my computer consoled to a switch and router(usb). this is all in packet tracer
We have only one RS232 port in PC. So just complete the basic settings on both device, and can connect using Telnet/SSH.
thank you brother
thank you so much
Welcome 😊
Exelente
Is this CCNA1 2022 Packet Tracer final exam?
Yes!
I there a speed run version of this where he just does the configuring and clicking
Hi, I'll have the exam tomorrow, every Lab I've done was the same, so Is it possible the exam will be the same of this?
Mostly!
Gracias 🥲
Why is my terminal blank when I click on it?
Nvm I fixed it, but how did you get all those ip addresses?
It is there in the addressing table, in the instruction sheet right!!
Viindum thank you chetta!
Where i find the Excel for requirments pls pls hjelp someone
how long is this test?
Still Exists!
Thx but i mean how long like 1hr, 2 hours ?
How to undo
anyone knows where to download the pt file?
Thank you.
You're welcome!
thx💗
You're welcome!
How to undo commands in the Terminal?
You can remove any configuration you have done incorrectly!
bro my CLI for router A is not opening can u plz help me what to do??
You can use Console Cable to access IOS!
TERIMAKASIH
After a month, still no reply from them. I guess I got blocked by them when I only asked them some questions.
No, we are not!
Please contact us using description details!
@@TechAcad I have already contacted you. Totally no response at all till now!
@@TechAcad it has been like 7 weeks!
I have evidences of totally no response from you all for many weeks when you say you did not.
For the exam is it the same for everyone?
Yes, Mostly!