2012 Ford Mustang V6 Plug and Play Remote Start
HTML-код
- Опубликовано: 14 янв 2025
- Hey guys so today I’ll be showing you what I troubled with while programming this plug & play remote start onto my moms car, other than that minor issue that I was able to figure out everything else went pretty smoothly
Plug & Play Remote Start : www.amazon.com...
Did you have to splice anything with the purple cutted wire?
Everything seems pretty simple
No splicing at all!!!
@@nationaloutlaws4818 thanks for the reply, already placed my order😁
question: so the amazon listing says no cloned/ copied keys. I have one original from when i bought the car and then one that i got made at the ford dealer. Will it still work with the one that i got made from the dealer?
Thanks for the video buddy, hopefully will do it over the weekend
Of course hope it helped!
Hello, guys! For me the device works perfectly, but... I have a problem - it gives a lot of errors: P1260:00-28 Theft Detected, Vehicle Immobilized; B10D7:51-88 PATS(Passive Anti-Theft System) Key and so on... What could be the reason
You can reset it. Disconnect negative battery for 5 minutes. Switch the key to run. Connect the battery. Turn ignition off. Lock doors with button on the driver door. It should reset. This resets you pats module while keeping all keys.
What adapter did you get they sent me wrong as well???
I didn’t get any adapter, everything that I got to make the car remote start work came with the kit, the link is in the description!!!
did you ever get the flip key to work with remote start?
Yes the flip key does work with the remote start
do i have to have my battery disconnected while doing all this then connect it right before programming or can i keep it connected the whole time?
Ok so i did everything and now im at the programming part. I do what the instructions say and all it does is put it on the run/on mode, cuts off then does it again. I tried what u said with putting it back in for 10 seconds and starting it. Doing that it didnt wanna cut off at all till i unplugged the module idk what is wrong
@@ImmortalBanditz it won’t cut off unless you do the sequence on the remote fob again OR you press the brake pedal, OR it sits for 10-15 mins on it’ll shut itself off!
That OB2 port is what I use to tune my car lol isn’t there another way to plug and play the remote start?
The ob2 port will still work as it should, it doesn’t affect anything it’s just basically tapping into the wires and then giving you the new ob2 port but in theory it should work as normal
My cars tuned and works with my radio system that also plugs into the OBD port
Bro what if i have 1 key snd mot sure if it’s from a dealer?
Tbh I had one key as well I had two after market keys made, I used my aftermarket key (only one) to program it cause I had the same question and it did program I just took the key out and I put it back in (same key)
Did your s550 remote work on it
Yes it did I had a locksmith program it
@@nationaloutlaws4818 program it too the remote start or the car?
The car, the remote star automatically worked after that
Did you ever get your new key fob to work?
The car has 3 keys programmed to it, one key is a oem ford key, the other two are duplicates non-original keys, they all work to turn the car on, all three keys work!
Does that Work in the manual Also ?
I don’t think it does, well tbh the ad says it doesn’t but if you think about it , you could bypass the clutch switch making the car believe you’re pressing the clutch in without actually doing so which means you should be able to make the kit work you’ll just have to remember to always leave the car in neutral with the e brake on, you can also manually start the car without pressing the clutch if you bypass the clutch !
it says no cloned or copied keys. but also people telling me i need to clone/copy a key at the locksmith or dealership? or can i use my one and only key for 2012
Gonna need two keys
I’m honestly not 100% but yes a copied or cloned key from the locksmith should work I used my ”cloned” key to check and it did work
Hi man do you know if the remote start is going work on 2019 mustang?
Sadly it won’t but if you search a plug and play remote start on Amazon in sure you’ll find one for your year and depending on weather it’s a push to start or key to start this brand might make a remote start for your car
Whats the maximum distance you could be away from turning on the car? In order to lock or unlock mines i have to be somewhat near the car, in a big parking lot it wouldnt be convenient for me.
I can be inside the house in the second Floor and be fine, I could be at my next door neighbors house and turn it on from there, whatever your oem remote can reach, that’s what it’ll do, since it uses your oem remote, also a dead battery can be your issue, I would replace the battery on the remote if I was you
Dose it work for 2011 mustang?
2010-2014
Se necesita tener el freno de mano para que funcione?
No, solo con que programe el aparato funciona
Do you have to have 2 keys to do this
No, i did it with one just fine, I mean I do have three keys programmed but I only used one
@@nationaloutlaws4818 thanks man I appreciate it
@@nationaloutlaws4818 I have another question, when you put the secondary key in to program it if I only have one key do I put it in and take it out twice after doing the 3 second turn over and the 15 second wait time?
That’s what I did, I have 3 keys but I only used one to program it, worked that way for me
@@nationaloutlaws4818 I just saw in the kit description that you needed two keys so I was just wondering
Donde compraste ese sistema ?
Amazon, el link esta en la description
Hey bro u uploaded this vid 2 years ago but I need help I bought it and my car won’t shutoff
@@ketsueki8043 disconnect it and do the programming process again
I’m pretty sure that happened to me once and that’s what I did
Hey bro! Everything works except when I put the key on now to put the car on gear it will shut off! I think is the anti theft system. Any ideas?!
I’d try to redo the steps see if there are any changes
Were you able to fix this problem? If so, how
I’m invested 😂
It shows me anti-theft when I try to start it, and I do have two keys and followed exact same instruction!,, anyone faced this issue?
Nvm,
I followed the instruction again and the problem is resolved!
I’m glad it got resolved!
I have the same model 2012 but my key fob has the 2x arrow remote start , and idk how to start it
Lock it the hit the 2x button twice