How to Repaste and Clean HP EliteBook Folio 9480M Laptop - Step-by-Step Guide🧹
HTML-код
- Опубликовано: 11 сен 2024
- In this video i will show you How to Repaste and Clean HP EliteBook Folio 9480M Laptop - Step-by-Step Guide.
🔵 #1 thermal paste: amzn.to/39BnQjB
🔵 #2 thermal paste: amzn.to/3xDpskD
👉 Tools used:
✔The proper Teardown kit!: amzn.to/2CATV8e
✔Shop Towels Original: amzn.to/2TFXF0O
✔Tweezer Set: amzn.to/2yvNjVV
✔Guitar Picks: amzn.to/2XJc6lT
✔Electric Screwdriver: amzn.to/2D0iGvq
✔Thermal Paste: amzn.to/3GdTH4s
✔Canned Air: amzn.to/2yzuNf9
✔Alcohol isopropilico: amzn.to/2KoKqil
✔THICK insulated jumper wire: amzn.to/2XL9GTF
✔Kapton tape: amzn.to/3ksJTJD
✔Freeze Spray: amzn.to/31DyAFQ
✔Conformal coating: amzn.to/3iqd12o
✔Air Duster : amzn.to/3oqEw1V
👉 Equipment Used:
✔Portable Soldering Iron: amzn.to/31zPipL
✔Air Duster: amzn.to/3oqEw1V
✔Hakko Hot Air Station: amzn.to/2O1k0PX
✔Nozzle for hot air station: amzn.to/2D21XYM
✔Hakko Soldering Station: amzn.to/2PRrtCF
✔Microscope: amzn.to/2CDqyCb
✔Kester Solder: amzn.to/2D2Bl9R
👉 Diagnostic tools:
USB amp meter: amzn.to/3knyElX
USB-C amp meter: amzn.to/2CbaPMK
On-Screen multimeter: amzn.to/33MV5uP
CHEAP multimeter: amzn.to/2DBnERh
Bench PSU: amzn.to/3kwiyGs
👉 Ultrasonic Cleaning:
ALL Laptops & CELLPHONES: amzn.to/2XLBnvM
Branson EC cleaning fluid: amzn.to/3aaa6Il
🔵 Leave a tip for us via cryptocurrency / PayPal if it helped you out:
› PayPal: is.gd/SL4AoD
› Bitcoin: 1Gc6ekScTjvcnSHoFGvu7nbBo3cyYzfsAL
› Ether (ETH): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› Litecoin (LTC): LTFQ14vaan4Fc3QqW3cn4NnWV7cvgrXWhk
› Bitcoin cash (BCH): qp4mecuy2q2rqvctdpuv5m0m05y6r8g64c3a48gf78
› TrueUSD (TUSD): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› XRP (ripple) : rNBVHSfb3iZXYaWm491zVBzYfaxnNnAoCs
› Doge coin: DGspV9CkUqYJUb4ygNVz4aekmgmq5i12Pe
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
#laptopDIY #Laptopservice #laptopteardown #laptopupgrade #laptopreview #DIY #electronics #laptopRepair
thank uu this is so helpful
You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
Very helpful.
It's my pleasure my friend.
😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
If you have any future questions or requests, please don't hesitate to reach out to me. I'll be happy to assist you.
Very informative. Mine just got wet on keyboard part, had to open it up and let it dry. About cleaning,if you don't have a paste, can laptop still continue to work or it may overheat?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, To ensure that your laptop operates smoothly and doesn't encounter overheating issues, it's important to follow these steps:
If you have lifted the heatsink and cleaned off the old thermal paste, it is crucial to apply a thermal paste before reassembling the heatsink. Failure to do so may result in the laptop shutting down after a few minutes of operation as it exceeds safe temperature limits.
When the thermal paste is not applied, the CPU and GPU can reach high temperatures, causing the cooling fan to spin at maximum speed. This can result in a noise similar to that of a jet engine. Moreover, the excessive heat generated can potentially damage the components of your laptop.
Therefore, it is highly recommended that you apply a thermal paste between the heatsink and the processor. This will facilitate efficient heat transfer and ensure the temperature remains within safe operating limits.
By taking these steps, you can prevent overheating issues, maintain optimal laptop performance, and extend the lifespan of your device.
I haven't cleaned it the paste it has just the fan. My son poured drops of milk on the keyboard that made me reassemble my Folio laptop. I did put parts outside to dry including the motherboard. Is there any chance of it coming back to 'life'.
look at the motherboard of any signs of water damage and 90% you may need to replace the keyboard (some keys may not work), 50-50 my friend , i wish you the best
Thanks a lot. I will assemble using your video and hope for the best.
you can do it, have faith and take your time,
Should you have any further questions or requests in the future, please don't hesitate to ask me.