@@chud327 I Second the wheels.. I like those better than those on 'Charles' but that's just my .02 worth. I have two of those 'Bullitt' hole wheels 15x7 5x4.75 they are AR Baja style. Mine are also Black but I still need two more to put on my '64 Old's Cutlass F85.. or my 2004 S10 3dr Crmmy... grocery get'er. Nice choice on the year early Generation s10. I like em a lot and miss my '93 Blazer RWD Tahoe 4dr. She Blazed.
What about an S-10 Mini Dually? Perhaps tandem axle? Either one of those ideas most likely would astonish the general public & grab attention for your channel. Ya????
It would be cool to do a cyclone or grand national powertrain. I'm sure it would be hard to find, but a turbo 6 would be fun. I like the blazer bumper. I've been wanting to put one on mine. It'd be cool to see the how to video.
So glad to see a comment for you, wanna trade for a race truck? JK... The goal is cheaper than the one before it, done in less time and more views. Speaking of Daytona, I want to have one in the spring break show an cruise around the track. Thanks so much for watching!
My 91 ford ranger with a 99 5.3 LS I’ll have about the same amount and I’ll have around 300hp and all repainted parts and can new exhaust and a shifter and a turbo 350 behind the 5.3 ls
Budget big block would be cool! Should be able to find them for pretty cheap. I had an 89 named zoomy that had a 383 bolted right up to the stock s10 5 speed. She was a riot!
I have a 91 s10 owned it 34 years. I think you are a master @ how you upgrade s10s for pennies on a dollar. Wish you lived close to me could definitly use your help with my project.😅😅😅😅
i cold started my 83 s10 with the 1.9l gas isuzu the other day up here in anchorage alaska at 7! and 3 pumps and she fired right up! s10s for life bro love your channel. ill be using mine for gold mining this year and ill be making videos on a gold mining channel with it in it.
I recommend stepping up the typical flowmaster "tinny" higher pitched V8 muffler(s) to flowmaster delta flow 40 series muffler(s) It will have a slightly deeper throatier sound while still keeping the signature fm sound.
@chud327 I know the feeling. Since I finished the ls one I'm like what do I do with the other one haha. But so hard to let it go just park er in the back
- Turn the truck into a sleeper. - Paint it all red. - Use the Blazer bumper. - The bullet hole wheels would look nice on this truck, especially if they've been chromed. - Put a powerful 4.3L V6 under its hood, like the ones GM used in the 2nd generation S-10s. LS Swapping this truck would make for an insanely tight engine compartment. Using a turbocharged Buick 3.8L V6 like the ones from the T-Types and Grand National would also be quite useful... and probably harder to acquire.
Also, these videos really make me miss my 2001 Chevy S-10 that much more. It just _had_ to get rear-ended and wrecked by some moron looking at their phone instead of the road... 😢💔
Never been much into Olds, but that was a a cool idea. I saw an s-10 the other day themed as a grand national Buick, very cooperative! Thanks for watching!!
99-02 4.8 LS drive by cable look for the 365 beads ? You should be able to find them by the dozens . I have a 2000 Silverado work truck with a 4.8 which now has 246,000 trouble free miles 325 hp. Stock ..
when i was in autobody college they a fleet of these for autobody automotive diesel mechanics drove them daily parts/supplies they were all new pewter color stick shift am radios no ac not sure if they had power steering very easy to shift amazing gas mileage not so good keeping up in hwy traffic at the time was driving a fully restored midnight blue color lifted 76highboy with noisy 38" gumbo mudders s10 could do circles around mine gas was $0.98/gallon
Holley is really good about sponsoring youtubers without a million subscribers. You should reach out to their marketing people about giving you the stuff to do an LS swap.
I'm wondering where Charles' cap went ? Lol. I know it's not as easy to see while reversing, so I finger that's why we don't see on the truck or trailer. Looking forward to the Lil Red Dime build !!
The cap is still here, I need to put it on and do some camping soon. Backing up is a pain, but at least I have a backup camera now .. thanks for watching!!
Chud327 You are a very talented individual. I recently ran into your videos and I liked the content you were putting out, so I subscribe to your channel. I started to watch your s10 build it was great! But with that said there's one thing I did not really care for, and that's you asking for money to support the channel. I under stand that all of these projects cost money and a lot of time but don't forget RUclips pays you for some of those video. I just think in my humble opinion that if some one want to contribute to your channel out of the goodness of their heart, I say go for it, but don't ask! Just saying!!
I always hesitate making it look like I am begging for money. Out of about 1000 videos, I have only mentioned it a handful of times. Some people volunteer to donate and if it is a super chat 40% of the donation disappears. I wanted that one guy to know of a different option, if he feels generous again. Tried to mention it during an unimportant video that would likely get a bunch of traffic. Thanks for the subscribing and thanks for watching!
I have a short I could put out in a few minutes. I have been busy redoing the master bathroom, but hope to get back to regularly scheduled programming really soon. Thanks for asking and for watching!!
Nothing yet… mostly just searching on marketplace place for engine options and tires and wheels… I only know I want to polish up the red and rust and do the blazer bumper so far. Will try to get an update soon and thanks for asking.
@@chud327 I can't wait to move back down to FLA. I will be in Tampa or Bradenton but I will be bringing my toys down with me. I found a Ranger xlt in a barn and put a flatbed on the back. I mounted my 50 gallon gas air compressor, Miller Bobcat 225, 2,000 pound crane, drill press, and Swordfish vise that I searched for for five years. I have a trailer that I will be bringing my Xs650 bobber, '83 Harley sportster dirt bike, 4 wheeler and Yamaha 200cc three wheeler. I am starting my RUclips channel with the footage of finding the 3 wheeler and restoring it from the horrific state it is in. I am a chemical engineer however I have a mobile welding biz on the side. When I was going to USF my friends and I used to swim across the Manatee river to go mushroom hunting in the fields on the other side. So many close calls with alligators and poisonous snakes. I really miss Florida my friend. Are you near Tampa or closer to Pensacola? I have so many things I want to build and maybe we could collaborate on some of them. Keep up the great videos my friend.
@@chud327 I'll keep my eyes peeled for used tractor tires. I used to have friends that owned a tire shop but I do not know if they deal with large tires like that. Next time I come down will be just to visit friends and stuff so if I can find any I will let you know and maybe be able to bring them down with me.
Super charger would be fun!! Better hope the Venmo takes off... May have to do that after it gets running or it will be more than CHARLES was .. Thanks so much for watching!
I think you should go for the Blazer bumper. I love those 'bullet hole' wheels, they'd look great on that truck.
I agree on the bumper and maybe on the wheels. thanks for watching.
@@chud327 I Second the wheels.. I like those better than those on 'Charles' but that's just my .02 worth. I have two of those 'Bullitt' hole wheels 15x7 5x4.75 they are AR Baja style. Mine are also Black but I still need two more to put on my '64 Old's Cutlass F85.. or my 2004 S10 3dr Crmmy... grocery get'er. Nice choice on the year early Generation s10. I like em a lot and miss my '93 Blazer RWD Tahoe 4dr. She Blazed.
@@RabidSnot we will see and thanks for watching!!
My son in law stumbled across your video and shared it with me. He says we do things alot alike.(Mcguyver style)😅
0:55 classy, nice truck
Thank you and hope to make it more classy! Maybe a top hat and monocle? Thanks for watching!!
What about an S-10 Mini Dually? Perhaps tandem axle? Either one of those ideas most likely would astonish the general public & grab attention for your channel. Ya????
Yeah, a little dually would be cute!! Thanks for watching.
It would be cool to do a cyclone or grand national powertrain. I'm sure it would be hard to find, but a turbo 6 would be fun. I like the blazer bumper. I've been wanting to put one on mine. It'd be cool to see the how to video.
Consider it done ( as soon as I get free time ) thanks for watching.
i would go for the blazer bumper for sure, it has more of a cleaner look to it
That is what I am thinking and thanks for watching!!
Dude! This is going to be awesome! I love how we just chatted about this at Rod Run. Can't wait to see it rolling down the road :)
So glad to see a comment for you, wanna trade for a race truck? JK... The goal is cheaper than the one before it, done in less time and more views. Speaking of Daytona, I want to have one in the spring break show an cruise around the track. Thanks so much for watching!
Love the bullet hole wheels. Truck bumper.
Thanks for the suggestion and thanks for watching!
@@chud327 I appreciate your content! Thank you.
@@rucebaybruce6174 you’re very welcome!!
My vote is addiction, but I am going to be an enabler as I like the video and patiently wait for the next one! :D
Thanks so much and thanks for watching!!
My 91 ford ranger with a 99 5.3 LS I’ll have about the same amount and I’ll have around 300hp and all repainted parts and can new exhaust and a shifter and a turbo 350 behind the 5.3 ls
Sounds very nice, thanks for watching!!
Blazer bumper for sure
Agreed and thanks for watching!!
You should do a mini tub on Charles! Switch leaf spring from right outside to left inside and so on so forth! Mini tub would look amazing!!!
That would be cool and thanks for watching!!
@@chud327 or maybe a ls swap blazer! Box style!
That would be sick!!
Budget big block would be cool! Should be able to find them for pretty cheap. I had an 89 named zoomy that had a 383 bolted right up to the stock s10 5 speed. She was a riot!
Big block would be cool and have always wanted a 383... We will see what show up. Thanks for watching
I’m so ready for this!
Thanks so much and me too. What I am really ready for is finding an engine and fixing it up. See you then.
I have a 91 s10 owned it 34 years. I think you are a master @ how you upgrade s10s for pennies on a dollar. Wish you lived close to me could definitly use your help with my project.😅😅😅😅
Where are you located? Would love to help. Thanks for watching and so cool you have kept it for 34 years!!
i cold started my 83 s10 with the 1.9l gas isuzu the other day up here in anchorage alaska at 7! and 3 pumps and she fired right up! s10s for life bro love your channel. ill be using mine for gold mining this year and ill be making videos on a gold mining channel with it in it.
Very cool can you send the link to it? Thanks for watching
ruclips.net/video/pYvEDKCWEr4/видео.html
@@akcrawling4775 thanks, subscribed
@@chud327 thx!
Hi chud. Love the videos. Great job as always
Thanks so much as always and thanks for watching.
I recommend stepping up the typical flowmaster "tinny" higher pitched V8 muffler(s) to flowmaster delta flow 40 series muffler(s) It will have a slightly deeper throatier sound while still keeping the signature fm sound.
40 series sounds good to me, thanks for watching!!
HEECK YEAH so awesome. Cannot have enough of them there so fun. Great video
I should probably sell the first to pay for the second, but not ready to let go just yet... Thanks for watching !!
@chud327 I know the feeling. Since I finished the ls one I'm like what do I do with the other one haha. But so hard to let it go just park er in the back
Happy new year
Happy new year to you too!! Thanks for watching!
- Turn the truck into a sleeper.
- Paint it all red.
- Use the Blazer bumper.
- The bullet hole wheels would look nice on this truck, especially if they've been chromed.
- Put a powerful 4.3L V6 under its hood, like the ones GM used in the 2nd generation S-10s. LS Swapping this truck would make for an insanely tight engine compartment. Using a turbocharged Buick 3.8L V6 like the ones from the T-Types and Grand National would also be quite useful... and probably harder to acquire.
Also, these videos really make me miss my 2001 Chevy S-10 that much more. It just _had_ to get rear-ended and wrecked by some moron looking at their phone instead of the road... 😢💔
howie loso is a pretty catchy name for the new truck
it very well could be, and thanks so much for watching.
Love watching videos like this, endless knowledge
Glad you enjoyed it! Thanks so much for watching!!
Blazer bumper and modify the hitch behind it with a flip down tag where the drawbar slides in.
Good idea and thanks for watching!!
Thank you for the content we really enjoy it
Glad you enjoy it! And more on the way! Thanks for watching!!
Like the truck
Thanks so much and thanks for watching!!
Use compound first to bring out the shine
good idea and thanks for watching.
I think an Oldsmobile Bravada front grille and a 442 theme or Hurst theme would be awesome
Never been much into Olds, but that was a a cool idea. I saw an s-10 the other day themed as a grand national Buick, very cooperative! Thanks for watching!!
99-02 4.8 LS drive by cable look for the 365 beads ? You should be able to find them by the dozens . I have a 2000 Silverado work truck with a 4.8 which now has 246,000 trouble free miles 325 hp. Stock ..
Hope to find a great deal on some thing and thanks for watching!
when i was in autobody college they a fleet of these for autobody automotive diesel mechanics drove them daily parts/supplies they were all new pewter color stick shift am radios no ac not sure if they had power steering very easy to shift amazing gas mileage not so good keeping up in hwy traffic at the time was driving a fully restored midnight blue color lifted 76highboy with noisy 38" gumbo mudders s10 could do circles around mine gas was $0.98/gallon
Sounds like a cool fleet. I miss those gas prices. Thanks for watching!!
Holley is really good about sponsoring youtubers without a million subscribers. You should reach out to their marketing people about giving you the stuff to do an LS swap.
Funny, i was just thinking yesterday about contacting them... thanks for the tip and for watching.
I think you should keep the stripes on the hood.
They do look cool all faded and whatnot. Thanks for watching!
I'd go with the Blazer bumper
I am thinking the same thing, I may do that tomorrow. thanks for watching.
You should do a mustang theme for the new s-10
That would be cool and thanks for watching!
I'm wondering where Charles' cap went ? Lol. I know it's not as easy to see while reversing, so I finger that's why we don't see on the truck or trailer. Looking forward to the Lil Red Dime build !!
The cap is still here, I need to put it on and do some camping soon. Backing up is a pain, but at least I have a backup camera now .. thanks for watching!!
BBC 454 with a blower
That would be sick, Venmo better wake up… thanks for watching!!
Yea show the whole process instead of packing in 1 video. I like that idea
That's the plan and thanks for watching!!
Why don’t you use your back bumper off your truck bed trailer and put the blazer one on it
Good idea and thanks for watching!!
I love your truck
Thanks so much and thanks for watching!!
Heck yeah.. more S10 content..👍👍
I am excited and thanks for watching!!
Chud327 You are a very talented individual. I recently ran into your videos and I liked the content you were putting out, so I subscribe to your channel. I started to watch your s10 build it was great! But with that said there's one thing I did not really care for, and that's you asking for money to support the channel. I under stand that all of these projects cost money and a lot of time but don't forget RUclips pays you for some of those video. I just think in my humble opinion that if some one want to contribute to your channel out of the goodness of their heart, I say go for it, but don't ask! Just saying!!
I always hesitate making it look like I am begging for money. Out of about 1000 videos, I have only mentioned it a handful of times. Some people volunteer to donate and if it is a super chat 40% of the donation disappears. I wanted that one guy to know of a different option, if he feels generous again. Tried to mention it during an unimportant video that would likely get a bunch of traffic. Thanks for the subscribing and thanks for watching!
i got those z28's on my truck i like em
Very cool, I like them too now just need another set, and thanks for watching.
Make it a camper. A Sleeper you can actually sleep in.
I get it and I like it. Thanks for watching!!
We need a 302 ranger swap lol
That would be cool, especially a 302 check swap .. thanks for watching.
Not sure how I feel about this proposal, usually when someone tells me "don't feel pressured but" ...
I get you, but truly no pressure. Thanks for watching!
#47 and I can’t wait to see this build! I would paint the hood black and clear coat the rest, maybe even lower it and put in a 2jz motor
Everything you said, but I don't even know what a 2jz motor is .. will have to research and thanks for watching!
man i still havent got my s-10 done i havent been able to find any motors
Now I am back in that same boat, must find an engine for the new project. Good luck on your hunt and thanks for watching!!
Use the blazer bumper.
Agreed and thanks for watching!!
When will the next river ride be uploaded?
Been trying to get there... Hoping to get there very soon, thanks for asking and thanks for watching.
Now was that Frost or is that Snow, lol
Sleeper could be fun.
Frost, we rarely ever get snow, I remember some 30 years ago... thanks for watching and I am thinking sleeper too.
@@chud327 you told me about that snow you got 30 or so years ago.
Hey chud your awesome I just messaged you about my s10
Very cool and thanks for watching!!
@@chud327 hopefully when I'm not working I'll make videos about it and fixing the ujoints
@@Travispulliam ok, let me know
Patina theme
That is the plan and thanks for watching.
Corvette theme
I love it, currently looking at corvette wheels, but they probably need spacers… thanks for watching!
when are you going to upload again?
I have a short I could put out in a few minutes. I have been busy redoing the master bathroom, but hope to get back to regularly scheduled programming really soon. Thanks for asking and for watching!!
@@chud327 ok cool
Looks pretty solid! Surface rust only?
99% only surface rust, which I like. Should clean up nice. thanks for watching.
You figure out a game plan for next s10 yet?
Nothing yet… mostly just searching on marketplace place for engine options and tires and wheels… I only know I want to polish up the red and rust and do the blazer bumper so far. Will try to get an update soon and thanks for asking.
Any updates?
Was working on it 3 days ago, video coming soon. Red one, still engine hunting. Thanks for watching
Hey brother ,what ever happened to your zero turn skid steer?
That was actually my cousin's but I have been debating making my own. I need to find 2 old tractor tires to get me motivated. Thanks for watching!
@@chud327 I can't wait to move back down to FLA. I will be in Tampa or Bradenton but I will be bringing my toys down with me. I found a Ranger xlt in a barn and put a flatbed on the back. I mounted my 50 gallon gas air compressor, Miller Bobcat 225, 2,000 pound crane, drill press, and Swordfish vise that I searched for for five years. I have a trailer that I will be bringing my Xs650 bobber, '83 Harley sportster dirt bike, 4 wheeler and Yamaha 200cc three wheeler. I am starting my RUclips channel with the footage of finding the 3 wheeler and restoring it from the horrific state it is in. I am a chemical engineer however I have a mobile welding biz on the side. When I was going to USF my friends and I used to swim across the Manatee river to go mushroom hunting in the fields on the other side. So many close calls with alligators and poisonous snakes. I really miss Florida my friend. Are you near Tampa or closer to Pensacola? I have so many things I want to build and maybe we could collaborate on some of them. Keep up the great videos my friend.
@@chud327 I'll keep my eyes peeled for used tractor tires. I used to have friends that owned a tire shop but I do not know if they deal with large tires like that. Next time I come down will be just to visit friends and stuff so if I can find any I will let you know and maybe be able to bring them down with me.
Go Corvette/Cyclone with it
That would be cool, I now see a 4x4 blazer for just $500 that would work for a cyclone replica, but I better stick to one at a time...
I'd say paint the hood black and blazer bumper
I was thinking the same thing and thanks for watching.
How can I send you a pics
Facebook CHUD channel or Instagram chud_327, would work. Thanks again for watching!!
What if you supercharge it? It is already going to be a sleeper with a V8 and a stick shift... maybe you should take a mower in the ice
Super charger would be fun!! Better hope the Venmo takes off... May have to do that after it gets running or it will be more than CHARLES was .. Thanks so much for watching!
Blazer bumper
I agree and that may be the first episode while I hunt for an engine... thanks for watching.
IRS rear suspension
Very cool especially if Corvette themed... Thanks for watching!!
Leave it as it is it would be a FORD tribute...
You are funny and thanks for watching!!
Lift the red one
I sure would if it were a 4x4, maybe I can get a 4wd next .. thanks for watching!
@@chud327 gasser?
How Much would you sell Charles for??
I probably should sell it to fund the next one, but not ready to let it go. Make an offer and thanks for watching!!
This is your cousin Dallas by the way just started a Chanel and we should do a collab sometime when I’m back home
Murdered out everything black. Tint as dark as your state allows.
That would be cool and thanks for watching!!
Do you remember me
I may need a reminder, but thanks for watching.
👍👍🌞🌞🎇🎊
23 minutes to go
and not just 3 minutes, see you there...
Corvette motor
I have been looking, that would be awesome. Thank you for watching!
Ya le pusiste su posi a la verde/azul??
What do you mean by position? Thanks for watching!!
@@chud327 ya le hiciste posi a tu rear end?te quedo muy bien el motor y se ve bonita con su traila same style
Corvette theme
I love that Idea and it is a good possibility. thanks for watching.