Hi. I've purchased one SW16 relay board but I can't connect to this. When I tried to use the IP I seen the main configuration screen for 5 seconds (more or less) and suddendly I've got the message "use browser that support HTML5". Have youo any Hint about it? Thank you
Hi, this option was hiden on standard hlk-rm04 module without relay? What firmware have you on rm? Is it any extra device on board to have 16 channels or using gpio from rm? Regards
Can we keep pc on and programme individual relays for various timing functions and grouping different sets for different modes of operation or alexa voice commands
Thanks for the video. I unable to connect wire in relay module. 1st & 2nd wire start automatically even when relay module is off. And connection between 2to3 or 1 to3 didn't work. Please help.
Hello friend!... Does your card work via internet? I have one just like it and it only works on the local network! I await your answer.... Greetings, Victor Silva.
i am using the same from last year, and now facing so many problem , and need to replace the RM-04 module .... but facing the problem in p2p.asp cant go through
Hii i want to watch how can we connect this device with main power supply nd all appliances i mean if we are giving main power to this device its going blast right so how can we connect this with all home appliances???
5v are required to operate the board only, now after that, each relay has three pins which are in two connections i.e NO (Normally open) and NC (Normally close) . the neutral of each device/appliance will be connected as common and phase will be at the Relay's NO. whenever the relay is activated the NO will become NC and the current will start flowing and your device connected to that individual relay will turn On. see how to connect load with relays ,it will help you.
Hi. Firstly thank you for you videos and support. Please can you say me how can i integrate this 16sw module to crestron processor ? In other mean i want to control this module over rs232 port with sending serial command from cmd. If you have any experiences with it please share me. Thank so much
Ola meu nome é Daniel e sou do Brasil. Adquiri recentemente essa placa, porem o aplicativo desliga do nada. Gostaria de saber se existe um outro aplicativo que controla essa placa ou se é possivel controlá-la com outro aplicativo ?
colega vc sabe como resetar essa placa,sem ser pelo botao de reset fddela???? adquirir uma dessas e fui aplicar uma configuraçao pelo youtube onde ela naioo esta emitindo sinal do wifi eas conecçoes de rede ligam e em seguida cai e nao volta mais. me ajuda por favor
Hello sir my name Sanjay ....I saw your video I got it how it works but I can purchase....sir can you provide me website which the board sale thank you
Hello sir, Great video. I wanted to operate these relays from an MS Access program. Kindly help me for my project. Plz share your contact i wish to talk to you
It all works until I try to change the subnet to something more usual like 192.168.1.xxx instead of default 192.168.16.254. If I change to 192.168.16.253 it works. But 192.168.1.80 it doesn't seem to work. Is it allowed to change the subnet?
Excellent work, sir what is 16 channel relay with wife model name?
Is it possible to controll using mobile at any were...?
Can we rename the switches, instead of switch 1 or switch 2 to light or fan and so on?
this one can use manually on/off switch or push button switch
Hi. I've purchased one SW16 relay board but I can't connect to this. When I tried to use the IP I seen the main configuration screen for 5 seconds (more or less) and suddendly I've got the message "use browser that support HTML5".
Have youo any Hint about it?
Thank you
Hi, this option was hiden on standard hlk-rm04 module without relay? What firmware have you on rm? Is it any extra device on board to have 16 channels or using gpio from rm?
Regards
Dose it work through the internet (4g ) if the mobile phone is not connected to the same wifi ?
Hi how to connect wall switch, in case if there is internet failure can we use wall switch to run the appliances manually. Please advise.
U can use parallel to relay contact to swith
Bravo come sempre.
Sir can we connect Refrigerator or Ac to on & off.
If not then which device will be required please tell me.
Can we keep pc on and programme individual relays for various timing functions and grouping different sets for different modes of operation or alexa voice commands
ola amigo, como fazer uma ligação montagem das ligações dos fios do relé?
Thanks for the video.
I unable to connect wire in relay module. 1st & 2nd wire start automatically even when relay module is off. And connection between 2to3 or 1 to3 didn't work. Please help.
Thanks for sharing and links.
Hello friend!...
Does your card work via internet?
I have one just like it and it only works on the local network!
I await your answer....
Greetings, Victor Silva.
Thanks for sharing such video which made home automation for us.
Great board, how about a newer video covering V3.1 & wher to get app
If i use the mac20f wifi modoul in here it can be run???
Sir 16 channel wifi relay working or not working plz reply ???
i am using the same from last year, and now facing so many problem , and need to replace the RM-04 module .... but facing the problem in p2p.asp cant go through
what happed this
Please answer can be control by alexa
sir kya hm aplicacion ke back ground me koi bhi image lga skte h
Hii i want to watch how can we connect this device with main power supply nd all appliances i mean if we are giving main power to this device its going blast right so how can we connect this with all home appliances???
5v are required to operate the board only, now after that, each relay has three pins which are in two connections i.e NO (Normally open) and NC (Normally close) . the neutral of each device/appliance will be connected as common and phase will be at the Relay's NO. whenever the relay is activated the NO will become NC and the current will start flowing and your device connected to that individual relay will turn On. see how to connect load with relays ,it will help you.
Is it compatible with Alexa?
Can the relays be momentary on off?
Good product and explanation thanks
is it required the net connection?
Hi. Firstly thank you for you videos and support. Please can you say me how can i integrate this 16sw module to crestron processor ? In other mean i want to control this module over rs232 port with sending serial command from cmd. If you have any experiences with it please share me. Thank so much
I think 16 channel wifi relay blocked??
Can we use it with alexa?
i am having the same device, please find me a solution, the device is restart again and again
Ho cambiato scheda radio entro solo 192.168.16.254 configurazione no su 192.168.16.254/p2p.asp perché
I dont know what this guy is working on but I have the same unit and it is doing nothing like he says it should, can anybody help
I want purchus your module
Can I know the current ratings for relay. I mean, the load current ratings
What is the cost
Do it supports IFTTT?
Hii sir how to contact you for this device setup
Hi there, thank for the video. I wan to now can connect to internet and control the relay from worldwide and how can i do?. Thank you sir.
Idk may be try to port forward?
Does this support mqtt
Ola meu nome é Daniel e sou do Brasil. Adquiri recentemente essa placa, porem o aplicativo desliga do nada. Gostaria de saber se existe um outro aplicativo que controla essa placa ou se é possivel controlá-la com outro aplicativo ?
colega vc sabe como resetar essa placa,sem ser pelo botao de reset fddela???? adquirir uma dessas e fui aplicar uma configuraçao pelo youtube onde ela naioo esta emitindo sinal do wifi eas conecçoes de rede ligam e em seguida cai e nao volta mais.
me ajuda por favor
Daniel Almeida poderia me sa uma força na config por favor
@@alison8488 defeito na placa wireless !!! Tenho aqui a placa 16ch novinha em folha se quiser te vendo !!! Whatsapp: 21 4116-4066 (fixo) !
Отключилось питание платы, а после включения все настройки reset..
Hello sir my name Sanjay ....I saw your video I got it how it works but I can purchase....sir can you provide me website which the board sale thank you
Dear friend...we are try to this company still out of stock
It has internet connection for home
Please explain acording timeing on off yes no
Sir kya hum Ac connection kr sakte hai
नही ..ये अधिकतम 2 amp रेटीग के लिये ठीक है ac को 5 amp से ज्यादा लोड चाहिये
dear sir how i buy the product and hiw i got the app? I need it. How i contect with you?
Amazon
His website link available video discretion.
What is price ?
How will i buy this one?
Great
How to convert client WiFi
ios ,blynk can't connect your board
Sir how to edit button name & how much it's price
5000
Buenas tardes
Me puedes enviar el video en español
successful. (but needs upgrading to improve and do more.)
Hi,
What is first password on android setting.
It is available in pakistan
Non riesco p2p.asp non mi fa entrare
how can i buy
Can you help me
Hello sir, Great video. I wanted to operate these relays from an MS Access program. Kindly help me for my project. Plz share your contact i wish to talk to you
It all works until I try to change the subnet to something more usual like 192.168.1.xxx instead of default 192.168.16.254. If I change to 192.168.16.253 it works. But 192.168.1.80 it doesn't seem to work. Is it allowed to change the subnet?
How by it
Mi dice sito non sicuro?
Hello, how many options do you have on SETTING, or what you can setting?
Can you give me you email?
Sai dirmi perché quando scrivo 192.168.16.254 /p2p.asp mi dice sito non sicuro e butta fuori non mi da password
Price
Quale è il problema?
Sir yeah kitne ka hai
nice
Model price how to get this
Yah board mujhe chahie kitne rupaye ka doge
dear pls tell me
Send it to me in India😅🤔
Sir apka no mil sakta h
hi
Sharma Rajesh Kumar
Lee Christopher Martin Margaret Robinson Jessica
Presenter looks like he's drunk,
Hi