you notice how there’s no ventilation system in that room? those guys walking around without respirators when they were spraying primer must have lungs of steel or just don’t know the dangers
I am building a fiberglass, 1:8 scale Columbia River Gillnetter model and this video has been my bible-thank you! I have just positioned all my stations so I have a long way to go (doing this piece by piece on my social security!😊), but this video gives me hope! Blessings!
What are the layers of paintings you’re applying and why do you have to sand them every single time you apply them?? Thanks for your answers. Much appreciated!
moha Abdi The first coat is paint (Gelcoat) after applying fiberglass over Gelcoat the surface gets sanded after curing before other layers of fiberglass gets put on. 2-3 layers can be put on at a time while wet.
Anyone who knows how to build such a boat.i am based in nairobi kenya kindly let me know if you can help nd i am ready to pay for whatever it takes thanks
Seems good so far! Was easy to talk to about his boat Plans t.co/uM8hFDqZOp Guided me in the right direction & helped me understand everything & in the end it was what I wanted
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
Go for it kid . Im a boat builder as well and my career started off as a dream, nothing is impossible, once you have the love and passion for it thats what it takes to be a successful boat builder. Good luck from Don Marine Boating Company. Trinidad and Tobago. 😎😎😎😎😎
I use to be a plug/mold builder and it is a lot of work. sand sand sand wax wax and wax some more..... I think after spraying it 3 times with gray durtec I would give it a clear coat then wax maybe 3 times and then PVA for a mold release....
Ditto, this is old school for sure. Glad I got to learn this method in the beginning years of my marine career. Then 5 axis took off, then outsourcing of tooling etc.... Glad I got to "Learn" this before it died.....
Great video of the process! Did you have lots of blocking out the tooling gel on the inside of the mold from the strip planking printing through? I’ve found it helps to glass the wood plug before fairing but this adds a whole big step and extra cost - but makes the plug surface more stable. Looks like you have a very efficient process - thanks for sharing!
Yes glassing the plug before fairing would be more time consuming and expensive. We always try to keep the overall cost down. This process has worked well for us. A quick finish sanding in the mold took care of any imperfections the strip planking might’ve left. Thank you for the comment!
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
Damn... Whats with the clouds of nasty dust??? How hard is it to get an old furnace fan and tape a couple of furnace filters over the outlet to pull all the dust out so you can see what the heck you are doing. Take it from an old shipbuilder, that that dust is an annoyance now, wait till you get older and it all catches up with you.
Hello, I am the gyro stabilizer manufacturer, gyro stabilizer series models for displacement 1 ton to 500 tons of ships, inexpensive, welcome to consult me.😊
Worked in the skincoat/ layup dept. At Doral boats in the early 2000s Had to make molds for components.. A skill that's not taught...it's learned through years and years...no class teaches this.
@@r.c.850 if I made a video showing you how to make a cake & started with the eggs & flour then showed you the finished cake, unless you knew how to make a cake it would not make sense If you are going to show how something is made then show it, dont leave bits out!
Unless I missed something...when did you guys remove the framing/wood plug structure? It appears you omitted the process entirely? The video goes from flipping over the entire plug/mold to morphing into a real mold, sans framing structure. What was involved in the removal of the wooden structure, and when was this process done??
I have a hull already built that went out of business in the early 90s and I wanted to make some slight changes on the hull and make a mold out of it. What is the best way to make a mold from a hull already built? Do what u guys did and use it as a plug and then build around it?
Always wondered how this was done! Y'all do great work. The video was done just right!
I love the smell of fiberglass in the morning... 😐
you notice how there’s no ventilation system in that room? those guys walking around without respirators when they were spraying primer must have lungs of steel or just don’t know the dangers
I am building a fiberglass, 1:8 scale Columbia River Gillnetter model and this video has been my bible-thank you!
I have just positioned all my stations so I have a long way to go (doing this piece by piece on my social security!😊), but this video gives me hope!
Blessings!
Looks shiny
I’m confused as to how the mold come off the stand when the curvatures are being placed. How do they not attach it to the stand
Very nice wonderful video
Awesome job.😎😎😎😎
Miss all that sanding!!!
I don’t understand, they applied the fiberglass outside the mold when it finished they remove it from inside
How was the hull taken out of the mold ??????????????
What are the layers of paintings you’re applying and why do you have to sand them every single time you apply them?? Thanks for your answers. Much appreciated!
moha Abdi
The first coat is paint (Gelcoat) after applying fiberglass over Gelcoat the surface gets sanded after curing before other layers of fiberglass gets put on. 2-3 layers can be put on at a time while wet.
Gulf master thank you so much for your answer. I really appreciate it.
Why are there no stringers on the hull?
what material is the planking ? 1/4 plywood ? IDK
1/2” mdf
What’s the name of this hull?
4:25 how many fiberglass layers??
4 layers 1-1/2oz mat, 2 layers 2415, 1/2” balsa core, 2 layers 2415, stringers/wheels and you’re done, sounds simple right😂
Awesome
educational. Thanks
Spettacolare. Thank you!
Where did all the wood framing go after it was flipped...
Trash,
The wood framing (the plug) was removed from the mold and taken to the trash, not reusable
thanks for the beginnings of the BOAT...could we have the follow ups on the rest of the build?
R Dean Benson There will be a video of a complete boat in about a month or so
👍
Not a very efficient design. Gonna push water vs. cut through.
Twisted Bones 32 ft limit in the fishery it’s designed for
кому надо помогу такое дома сделать
How to build a fiberglass boat...
Step one: build a wooden boat
Lol
Anyone who knows how to build such a boat.i am based in nairobi kenya kindly let me know if you can help nd i am ready to pay for whatever it takes thanks
It’s just beautiful!! Thank you for sharing. I wish I could do that
Seems good so far! Was easy to talk to about his boat Plans t.co/uM8hFDqZOp Guided me in the right direction & helped me understand everything & in the end it was what I wanted
You can bro
Just get up and sell the equipments and start💪
I can do that
WOW...that's super impressive, most people don't realize what it takes to do this.
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
Just like building a model boat, but on a massive scale! Well done guys, I love the curves at the bow.
When I grow up this is exactly what I want to do.
Go for it kid . Im a boat builder as well and my career started off as a dream, nothing is impossible, once you have the love and passion for it thats what it takes to be a successful boat builder. Good luck from Don Marine Boating Company. Trinidad and Tobago. 😎😎😎😎😎
Go for it! just remember to always use quality masks.Last thing you want is fiberglass on your lungs.Safety first.
Wholesome
I found a boat shop in the yellow pages 20 years ago, called them up for a job and I still work there. I learned so much more than building boats.
@@indarsingh8363 ;सर क्या मै आप से बोट के बारे मे बात कर सकता हूं नँ पलीज
I use to be a plug/mold builder and it is a lot of work. sand sand sand wax wax and wax some more..... I think after spraying it 3 times with gray durtec I would give it a clear coat then wax maybe 3 times and then PVA for a mold release....
Me too!!
Hello sir.i would like to know if uou are able to help me in mold building of a boat that i want to make plz
Ditto, this is old school for sure. Glad I got to learn this method in the beginning years of my marine career.
Then 5 axis took off, then outsourcing of tooling etc....
Glad I got to "Learn" this before it died.....
Hi,can you tell me how many layers has been used to cover the mould ? And the thickness of the fiberglass material ?
How was the plug removed from the mold?
What you didn't show was how you extracted the wooden buck from inside the new mould. I can only presume it was very tight and had to be broken up.
As long as you do a thorough job of waxing the final surface of the bucket, the new mould mostly just peels straight out.
Compressed air. Pops the boat out.
Great video of the process! Did you have lots of blocking out the tooling gel on the inside of the mold from the strip planking printing through? I’ve found it helps to glass the wood plug before fairing but this adds a whole big step and extra cost - but makes the plug surface more stable. Looks like you have a very efficient process - thanks for sharing!
Yes glassing the plug before fairing would be more time consuming and expensive. We always try to keep the overall cost down. This process has worked well for us. A quick finish sanding in the mold took care of any imperfections the strip planking might’ve left. Thank you for the comment!
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
@@keremtopdal2905 🤭
Hell, I'd buy the plug and make a boat out of it.
great detail but that room could really use a good ventilation system for all the dust and particles from spraying and sanding
Damn... Whats with the clouds of nasty dust??? How hard is it to get an old furnace fan and tape a couple of furnace filters over the outlet to pull all the dust out so you can see what the heck you are doing. Take it from an old shipbuilder, that that dust is an annoyance now, wait till you get older and it all catches up with you.
There are good used lungs sold on ebay, at breath taking price 😅
ချစ်စရာလေးပါ ❤️🌊⛵👍🏼💯
Such a hideous process, wonder when 3D printing will be able to replace all these steps?
hey thank you for the nice vid, great team work
Hello, I am the gyro stabilizer manufacturer, gyro stabilizer series models for displacement 1 ton to 500 tons of ships, inexpensive, welcome to consult me.😊
my dream is to build a boat like this to travel around the nation.
I working south Korea FRP,, (fiberglass), making ship for 5 years
Matatan.🐎. Ribirin---HS
my dad's gillnetter was built like this..36ft x 11 ft , full throttle it does 21 knots with an in line 300 HP .
share with us the plans
Incredible cost of man power and epoxy etc etc.. no wonder they cost so much.
Worked in the skincoat/ layup dept. At Doral boats in the early 2000s
Had to make molds for components..
A skill that's not taught...it's learned through years and years...no class teaches this.
Isn't that stern too flat? I'd have expected some curvature and slope here.
Hello, good time, the cartoon was great. I am from Iran, Persian Gulf, Bushehr region. How can you help me make a boat like yours?
Want one. Great job, excellent video
Peace be upon you. I am from Morocco and have more than 8 years of experience in repairing fiber-lime fishing vessels.
If I could find one I'd use the mold itself as a boat.
Not sure why in this day and age - design in 3D CAD then unfold digitally and laser cut the panels, will fit together like an Ikea flat pack.
Hi😊 I'm a manufacturer of gyro stabilizer.
I am interested in knowing what is the white paint used on the mold and the primer are they some special type or regular wood primer cheers Ed
White is just drywall mud, and the primer is an automotive primer
So if u build the boat upside down why put it in the mold again
Nice video for boat mold constructions!!!
Can you say PPE? Do you know what it's for?
Too much forefoot, boat will bow-rudder and pitchpole not enough deadrise to counter toe -stubbing.
matthew willis
Thanks! You should watch our other videos with these boats in action.
what is the gel coating and what brands are offered? and how do you flatten the screwing holes?
3M marine filler or “bondo” works great for filling screw holes, a lot more structural integrity than fairing compounds
How much would just a blank hull cost?
All that work before a boat is even built, if that mould is looked after you can build plenty of boats out of it. Bloody big boat.
as someone who's designed quite a few hullforms (lines plans); this one is a beauty
Super
Обводы 30-40 годов,что это за ретро-лодка?
Magnificent Job well done,
The wax between is what helps them separate. It's just like bedding a rifle.
May I know the materials used to make core for this boat mold, please? It's such an amazing work. Thanks for sharing!
It’s an end grain balsa wood core. Thank you!
Una obra de arte
Hasta. El David de miguel Angel se sacarian el sombrero
It's the most beautiful and detailed process
Que materiales le colocó a el molde para el alma. O la estructura queantiene a el molde?
орууу.. занимаются серьезным проектом,но нет даже нормаьлной винтиляции xDDDDDDDDDDDDDDDDDDDDDDDDDD
Did I miss something? It didnt make sense at the end.
look the video again. make sense all the way. of course they not showing us all the steps, but is understandable.
@@r.c.850 if I made a video showing you how to make a cake & started with the eggs & flour then showed you the finished cake, unless you knew how to make a cake it would not make sense
If you are going to show how something is made then show it, dont leave bits out!
@@snortyhog LOL. ... you said at the end. but sure many step missing here. But you have the idea.
Good luck if you find the way to make your boat.
@@r.c.850 thank you but I'm.not building a boat!
Hulls for Fishing Boats?
Its like building 2 boats for 1 ~ i sold 1 and kept 1 ~ I could have made more but i didn't ~ 1 for 1 and i was done
Excellent video. Do you build to order or sell boats hulls please. Thankyou
I heard very good opinions about the Woodglut plans.
Ya’ll skipped the buffing process
That was very useful. What is the average cost to make one mold for deck and hull for boat size 29 or 30 ft ?
Nice looking boat good job guys
AL AYHAN
Thank you!
You didn't show the mold release being applied.
Unless I missed something...when did you guys remove the framing/wood plug structure? It appears you omitted the process entirely? The video goes from flipping over the entire plug/mold to morphing into a real mold, sans framing structure. What was involved in the removal of the wooden structure, and when was this process done??
There was no footage of this step, but the plug/framing was broken apart and removed by hand after the mold was flipped over.
Yes, I caught that when it was flipped. Thanks!!
A boat is a very expensive plastic bucket.
Where can I get the plans and framing to make a plug? Is there somewhere that sells kits or something? Very interested in making a plug.
We drew up the plans to scale, top view, bottom view, side view, all the frames are measured to scale, cut and built no computer, old school.
I wish you would have shown the removing of the wood frame from the inside
Do you make molds to order?
i would like to order a couple of units.
Tuyệt vời 💯👍😍
Shame they did not show how they got the plug out.
Grinding without suction- think of your lungs !
ahh i noticed that too only the real ones know, a good ventilation system and a nice seal on the respirator and you’ll live a long life
As I said to other guy. They been doing it for decades. But thanks for worrying
Başarılı bir model degil😂😂😂
😂😂😂😂
thats a big boat lol. What kind of wood is used for the planking? can it withstand high temps?
good job
I have a hull already built that went out of business in the early 90s and I wanted to make some slight changes on the hull and make a mold out of it. What is the best way to make a mold from a hull already built? Do what u guys did and use it as a plug and then build around it?
Yes probably best to use the hull as a plug after fixing any blemishes and making the changes.
Me gusta esta labor me gustaría perfeccionarme en un lugar asi
Can we make a catamaran? Where you guys base ?
S C no catamaran yet, we’re commercial boat builders out of Homer, Alaska.
Beauty
Really makes you wonder why boats are so expensive....
What kind of boat? Manufacturer
Great video, nice job.
That’s why boats cost a fortune