Good video amigo, i ordered 1 & since ive been a 12 volt tech for 35+ years i connected it to my DEH3000 with a dedicated 12 volt switch to the ignition wire & its own shared ground wire to the pioneer head unit, the radio's IP-Bus recognized the input & i hear the hiss white noise as i turn up the volume & the little blue light turned on & it paired to my phone but im getting no sound, i trouble shot it for half an hour & concluded that it never worked from the factory hence why i found this YT video😂
Hi, awesome video. Can you tell if the headunit can control the music player on the phone as in Pause/Start and Next/Previous or it is only working as a regular Aux and I would still need to operate the phone to control the music? cheers
Hey, thanks for watching! The head unit will not control music tacks or play/pause, it will only control volume. Track changes will be on the phone and you can adjust the volume on the phone as well but I turn my phone all the way up and then control with the head unit. I primarily use mine with streaming apps and it works wonderfully.
Just bought one and installed and sounds ok but misses some frequencies in the low end would say under 40-50hz the power is less than half. Compared with cable input same song same phone. For a hifi setup is not ideal.
Good to know thanks for this info. As time has gone on, I will occasionally get weird feedback and some distortion from time to time but it seems to clear up within 30 seconds to a minute.
It auto connects and gives and audible “connected” through the car speakers when it connects. It’s done it every time for me no issue yet. I actually used navigation on my phone and it gave me audible commands through the stereo as well. It was nice.
Hi, i've a similar bt module. Now i'm having a strange issue: when the key is ON but engine is off it works fine. NO CONNECTION (no devices name found in phone bt search and it disconnect and then no pairing at all) when i switch engine ON. Have someone solved this same/strange problem?
Check your power source and make sure your getting 12 colts when the engine is on. Maybe it’s it has 12 with key on engine off but drops once engine is running?
Tengo una radio jvc kg700. Compré un adaptador bluetooth chino, lo conecté a través de puerto trasero en la radio y esta no es reconocida por la radio. Cuando preciono el SOURCE no me aparece BT audio o BT PHONE.
I have this similar wi-fi for my Alpine 9813 and it’s a direct plug into the Ai-net adaptor but can you tell me exactly what wires (red/black) I can tap into? Item looks just like yours minus the different adaptor end. Can I simply tap the red wire into the stereo head-unit power (direct to battery) and find a simple grounding point for the black wire?
If you have a multi meter or test light I would find something that Has power when the Ignition is in the run and accessory position and no power when key is off. That is what I did just so you don’t have the device trying to connect when your car is off and you don’t want it to. There should be a keyed power source going to your head unit, you will just have to find what wire it is. As for the ground yes just find an existing screw in the metal part of the dash to ground, you can test the ground spot as well if you have a meter.
i have an alpine 9813r and have ordered this ai-net adaptor for bluetooth usage. should i connect the red wire to permanent live or connect it to ignition?
You should be able to find the device in the device list on you buddy’s phone and connect it. If you have trouble you may have to disconnect your phone and then pair his. I can be listening to my AirPods and get in my truck and my phone will automatically connect to this Bluetooth module quite flawlessly.
Yes I do get some of that feedback noise. It did seem to help turning my phones volume all the way up and controlling the volume with the head unit. I don't really hear any of it while playing music though thankfully.
Hi have buy the same bluetooth-aux. I connected to my car, blue lights flash ok, i connect my phone but i cant share sound. My car is lancia delta 2011 and haven't aux. It saw massage that no sourse available. I need to decoded?
Your phone connects the the bluetooth ok? is your volume turned all the way up on your phone? What type of head unit do you have? There may be a setting in there that you need to turn on. Let me know and I will try and help you out.
@@HighPriority hi install it again. I change the interface conector to the interface that says phone( i have tried to aux already). It works But only for music with phone and with low volume max level, and no radio. :(. My radio cd is the oem lancia delta 844 2010 no aux no bluetooth. nothing.
Mine is called Jie Rui BT-5908. Yours may be different though. When I connect Mine it states “connected” through the vehicle speakers. Hope this helps.
If you have a similar deck as mine in the video, power deck off, once it’s off, press and hold down the rotary volume/ multi direction knob, after a few seconds a menu will pop up and you can scroll to aux. to turn it on or off. Hope this helps.
hi men !! thanks you so much for your presentation !! i'l like to buy an old alpine and for you , what is a better alpine of storie ? if only one stay here !! no high price , the last model ( chinese product ) !! just the better !! the ICON ! thank you very much !!
Certifique-se de que seu módulo esteja conectado à entrada azul do barramento IP. O manual diz que a unidade deve reconhecer algo conectado à porta aux. Aqui está o link página 64, espero que isto ajude cms.pioneercarentertainment.com/files/Manual/AVH-P5350DVD_Owners%20Manual.pdf
Do you have sound issues? Mine is still working really well, I think the sound quality could be a bit better but I am overall still happy with the 12 or 18 bucks, whatever I spent haha. It still auto connects to my phone too.
@@hakim9785 two years and still working well. Sound quality is still pretty good in my opinion, hasn’t changed since install. A couple of times it has acted like it has lost connection, cutting in and out for a second or two but that’s it. It usually goes back to sounding fine, I think one time I disconnected and reconnected it on my phone in the Bluetooth menu and that fixed the issue.
I have not tried, so far I have just used my phone and it is still working great. Anything that has bluetooth connectivity should connect to this just fine.
Just tried this yesterday for an incoming call. When I answered, it immediately switched to phone audio so i selected this bluetooth device. I could hear the caller but it didn't sound very well so I switched back to my phone. It was just a spam call so I could not ask the person how I sounded on their end haha.
Muchas gracias, yo adquiri uno identico para el AVH-3300BT pero al parecer existe un problema de compatibilidad en el IP BUS, igual tu video me sirvio mucho para validar, saludos y gracias // Thanks a lot, i got one like this one for the AVH-3300BT but it seems there's a compatibility issue with IP BUS, therefore your video was value cause it helps me to validate and troubleshoot, best regards
Igual me sucedió con una pantalla doble Din Avh-p3250dvd no fue compatible el aparato Bluetooth "Jie Rui bt5908" con la entrada IP-bus, jamas lo detecta.
I had my setting on AUX on my e60 but the bluetooth module name doesnt come up on my phone. I got power to it but its just not scanning on my phone. I saw a chinese name pop up but I think it was the chinese driver at the Taco Bell drive thru in front of me. Lol.
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Good video amigo, i ordered 1 & since ive been a 12 volt tech for 35+ years i connected it to my DEH3000 with a dedicated 12 volt switch to the ignition wire & its own shared ground wire to the pioneer head unit, the radio's IP-Bus recognized the input & i hear the hiss white noise as i turn up the volume & the little blue light turned on & it paired to my phone but im getting no sound, i trouble shot it for half an hour & concluded that it never worked from the factory hence why i found this YT video😂
Good video! I had that same head unit back in the day!
It’s been a great head unit that’s for sure. The rotating face to insert cds doesn’t really work anymore but that’s where Bluetooth comes in handy.
Thanks for the video. I'm hooking up a similar one to an Alpine CDA-9886 right now. Hopefully I have the same results as you.
Glad I could help, hope it works out well for you.
@@HighPriorityGot it all hooked up. Works great. Thanks again.
@@Hertzsogood219 sweet! Glad it worked out.
If I was in there with you it would be the most satisfying ride ever.
Hi, awesome video.
Can you tell if the headunit can control the music player on the phone as in Pause/Start and Next/Previous or it is only working as a regular Aux and I would still need to operate the phone to control the music? cheers
Hey, thanks for watching! The head unit will not control music tacks or play/pause, it will only control volume. Track changes will be on the phone and you can adjust the volume on the phone as well but I turn my phone all the way up and then control with the head unit. I primarily use mine with streaming apps and it works wonderfully.
Great sound
Thank you! It’s still going strong, I use it daily haha.
Great how to video. Thank you
Thank you I appreciate that! Mine is still working just fine, no issues yet.
Cool. I bought one too.
How does it sound?
Just bought one and installed and sounds ok but misses some frequencies in the low end would say under 40-50hz the power is less than half. Compared with cable input same song same phone. For a hifi setup is not ideal.
Good to know thanks for this info. As time has gone on, I will occasionally get weird feedback and some distortion from time to time but it seems to clear up within 30 seconds to a minute.
Does it auto connect when it starts up? Or does it need to reconnect everytime
It auto connects and gives and audible “connected” through the car speakers when it connects. It’s done it every time for me no issue yet. I actually used navigation on my phone and it gave me audible commands through the stereo as well. It was nice.
Thnx man!
Thanks for watching!
What do you do during a call, since there isn't a microphone?
I believe I tried taking a call and I could hear them but your right, with no mic they had a hard time hearing me so I had to pick up the phone.
Hi, i've a similar bt module. Now i'm having a strange issue: when the key is ON but engine is off it works fine. NO CONNECTION (no devices name found in phone bt search and it disconnect and then no pairing at all) when i switch engine ON. Have someone solved this same/strange problem?
Check your power source and make sure your getting 12 colts when the engine is on. Maybe it’s it has 12 with key on engine off but drops once engine is running?
Tengo una radio jvc kg700. Compré un adaptador bluetooth chino, lo conecté a través de puerto trasero en la radio y esta no es reconocida por la radio. Cuando preciono el SOURCE no me aparece BT audio o BT PHONE.
I have this similar wi-fi for my Alpine 9813 and it’s a direct plug into the Ai-net adaptor but can you tell me exactly what wires (red/black) I can tap into? Item looks just like yours minus the different adaptor end. Can I simply tap the red wire into the stereo head-unit power (direct to battery) and find a simple grounding point for the black wire?
If you have a multi meter or test light I would find something that Has power when the Ignition is in the run and accessory position and no power when key is off. That is what I did just so you don’t have the device trying to connect when your car is off and you don’t want it to. There should be a keyed power source going to your head unit, you will just have to find what wire it is. As for the ground yes just find an existing screw in the metal part of the dash to ground, you can test the ground spot as well if you have a meter.
i have an alpine 9813r and have ordered this ai-net adaptor for bluetooth usage. should i connect the red wire to permanent live or connect it to ignition?
Hey Got question for you mines connected but I can’t get music from my phone
Did it pop up under devices in the blue tooth setting of your phone? Did you connect there? Also make sure your volume in your phone is turned up.
How do you connect another bluetooth device? like a friends phone.
You should be able to find the device in the device list on you buddy’s phone and connect it. If you have trouble you may have to disconnect your phone and then pair his. I can be listening to my AirPods and get in my truck and my phone will automatically connect to this Bluetooth module quite flawlessly.
@@HighPriority Nice, thanks for letting me know. Got one coming in the mail. looking forward to adding bluetooth to my aging stereo.
Do you get a hissing sound when you turn the volume up with no music playing??
Yes I do get some of that feedback noise. It did seem to help turning my phones volume all the way up and controlling the volume with the head unit. I don't really hear any of it while playing music though thankfully.
Hi have buy the same bluetooth-aux. I connected to my car, blue lights flash ok, i connect my phone but i cant share sound. My car is lancia delta 2011 and haven't aux. It saw massage that no sourse available. I need to decoded?
Your phone connects the the bluetooth ok? is your volume turned all the way up on your phone? What type of head unit do you have? There may be a setting in there that you need to turn on. Let me know and I will try and help you out.
@@HighPriority hi install it again. I change the interface conector to the interface that says phone( i have tried to aux already). It works But only for music with phone and with low volume max level, and no radio. :(. My radio cd is the oem lancia delta 844 2010 no aux no bluetooth. nothing.
I have the same problem, can you help me? My radio is IVA-W200RI and I'm trying with KCE-236B
@@vanessaaristizabal6562 i never solve it. I change with an android
Can you skip tracks with the head unit buttons?
No it’s all controlled with the phone except volume. If you have Siri or voice assist in your phone you can talk to it and have it do stuff.
What is the name of the blue tooth device/ plug in dongle on your IPAD under my devices?
Mine is called Jie Rui BT-5908. Yours may be different though. When I connect
Mine it states “connected” through the vehicle speakers. Hope this helps.
@@HighPriority ok, thanks. Apparently my iPhone 6S is not detecting it.
@@SirShoddrick ah that sucks. My iPhone 8 and my iPad seems to connect well.
@@HighPriority I’ll just have to experiment a little.
@@HighPriority come to find out I had my Bluetooth adapter paired to an old phone, so it works fine now... was user error..
How do I get the external option
If you have a similar deck as mine in the video, power deck off, once it’s off, press and hold down the rotary volume/ multi direction knob, after a few seconds a menu will pop up and you can scroll to aux. to turn it on or off. Hope this helps.
hi men !! thanks you so much for your presentation !! i'l like to buy an
old alpine and for you , what is a better alpine of storie ? if only
one stay here !! no high price , the last model ( chinese product ) !!
just the better !! the ICON ! thank you very much !!
Thanks for watching, not sure if you could buy one of these head units new anymore since they are so old haha.
Amigo, tenho um DVD AVH-P5350, como que faço para ativar no aparelho a entrada aux ip bus para tocar?
Certifique-se de que seu módulo esteja conectado à entrada azul do barramento IP. O manual diz que a unidade deve reconhecer algo conectado à porta aux. Aqui está o link página 64, espero que isto ajude
cms.pioneercarentertainment.com/files/Manual/AVH-P5350DVD_Owners%20Manual.pdf
Got the same and i'm not really convinced about quality. Looks like it took 50% of the actual quality.
Do you have sound issues? Mine is still working really well, I think the sound quality could be a bit better but I am overall still happy with the 12 or 18 bucks, whatever I spent haha. It still auto connects to my phone too.
For the negative where you plug it?
You can tie into a negative off the head unit or you can ground it to a bolt under the dash somewhere.
@@HighPriority hey its already 2 years....what do you think with that adapter? Is it still working? The sound quality good?
@@hakim9785 two years and still working well. Sound quality is still pretty good in my opinion, hasn’t changed since install. A couple of times it has acted like it has lost connection, cutting in and out for a second or two but that’s it. It usually goes back to sounding fine, I think one time I disconnected and reconnected it on my phone in the Bluetooth menu and that fixed the issue.
What about USB player? Does it work?
I have not tried, so far I have just used my phone and it is still working great. Anything that has bluetooth connectivity should connect to this just fine.
Hey. I tried the same thing you did there to your stereo. Mine worked too. But how about receiving calls?
Just tried this yesterday for an incoming call. When I answered, it immediately switched to phone audio so i selected this bluetooth device. I could hear the caller but it didn't sound very well so I switched back to my phone. It was just a spam call so I could not ask the person how I sounded on their end haha.
Damn mine won’t turn on the light won’t turn on
Take me for a ride bruh
My one didn’t work!
I have bought a similar adapter to use on Alpine CDM-7854 with iPhone 13
Damn that sucks! Does it show up under Bluetooth devices at all or just won’t connect? Mine is still working well.
Muchas gracias, yo adquiri uno identico para el AVH-3300BT pero al parecer existe un problema de compatibilidad en el IP BUS, igual tu video me sirvio mucho para validar, saludos y gracias // Thanks a lot, i got one like this one for the AVH-3300BT but it seems there's a compatibility issue with IP BUS, therefore your video was value cause it helps me to validate and troubleshoot, best regards
Gracias por mirar, estoy muy contento de poder ayudar. Estoy tratando de construir mi canal por esta misma razón. ¡Cuídate!
Igual me sucedió con una pantalla doble Din Avh-p3250dvd no fue compatible el aparato Bluetooth "Jie Rui bt5908" con la entrada IP-bus, jamas lo detecta.
Mine us not working, pleasw help
What head unit do you have? Did you turn on the aux setting in your head unit? I had to do that on my Pioneer for it to show up in the options.
@@HighPriority mine is suzuki swift 2015 model sir,
I had my setting on AUX on my e60 but the bluetooth module name doesnt come up on my phone. I got power to it but its just not scanning on my phone. I saw a chinese name pop up but I think it was the chinese driver at the Taco Bell drive thru in front of me. Lol.
Так а что это за блок в низу?
Часть с синим светом? Я предполагаю, что это просто модуль, который излучает сигнал bluetooth.
haha made in China.. good for u and usa
Pretty much! Mine is still working well.