DCS JF-17 Tutorial 15 - Datalink and IFF

Поделиться
HTML-код
  • Опубликовано: 20 дек 2024

Комментарии • 27

  • @JINXURS
    @JINXURS 3 года назад +1

    Thank you! Best tutorials for the jf-17

  • @colmillo65
    @colmillo65 2 года назад +4

    Thank you very much for your videos and the time you dedicate to help us.
    I don't know if I'm wrong, but I discovered that if I select a TCN before configuring the DATALINK, the TCN information is available in the HSD and no Datalink information is lost.
    Greetings

    • @deephack
      @deephack  2 года назад +2

      That sounds rather like a bug to me. TACAN info should be lost on switching on the datalink as it used the same radio hardware.

    • @colmillo65
      @colmillo65 2 года назад

      @@deephack Well, while this bug is present, I take advantage of using the tacan at my convenience. In ME I leave a TCN terrestrial equipment installed on the bullseye, and thus in addition to having Datalink I have information from the BE... I know, it's cheating.
      Thanks for answering
      cheers

  • @VinsanityOne
    @VinsanityOne 2 года назад +4

    Hey Deephack, really loving the tutorials, bought the JF-17 as my first DCS aircraft and loving it. Wondering if your mission is stricktly air to air, would you always run a datalink or can you still IFF without a datalink say if I needed to run the wmd7 pod for ground targets but knew their were patrols in the area. Thanks in advance.

    • @deephack
      @deephack  2 года назад +3

      You will generally want the datalink when doing A/A work. The IFF system is completely seperate however and so you could use it without the datalink.

  • @Synoopy2
    @Synoopy2 2 года назад +1

    Hi, Deepchack - I have been having a issue where I input 199 and it cycles to 001 and wont let me enter it in to go to Data Mode. Any thoughts on why this is happening?

    • @deephack
      @deephack  2 года назад

      Not entirely sure, first thought would be to check if you have TACAN turned on as it's not possible to use both at once.

    • @Synoopy2
      @Synoopy2 2 года назад

      @@deephack I found the answer - I had pushed the button on the radio console that switches comm 2 to the radio console. This would not let me enter the data link. This plane is weird in the fact that the data link/TCN and the radio share Comm 2. I was determined to find out the issue and that was it.

  • @GrandVazir
    @GrandVazir 2 года назад +1

    Is the block 3 of this jet released yet?

    • @deephack
      @deephack  2 года назад

      I don't know if Deka intend to provide a block 3 version of the aircraft. It is a sizeable upgrade and even IRL only 10 such aircraft exist to date.

  • @stalhuth
    @stalhuth 3 года назад +1

    Hello Sir in DCS mission editor what are the ground units that works for Datalink or similar to Awacs?

    • @TheSkipjack95
      @TheSkipjack95 3 года назад +1

      EWR radars (any unit with that prefix in the Air defense category in the ME) will behave pretty much the same as an AWACS. Otherwise, China has the KJ-2000 AWACS available.

  • @Dizzy62695
    @Dizzy62695 2 года назад +1

    Great video, but when I hit 199 and select it just goes back to 001. is that an issue with the mission i'm on?

    • @deephack
      @deephack  2 года назад +1

      It could be, perhaps the mission maker has changed the default presets.

    • @Synoopy2
      @Synoopy2 2 года назад

      Did you ever figure out what was causing you to hit 199 and go back to 001, I am having the same issue.

    • @Dizzy62695
      @Dizzy62695 2 года назад

      @@Synoopy2 I never did. The issue only happens on one particular mission however, so process of elimination seems to point that way

    • @Synoopy2
      @Synoopy2 2 года назад

      @@Dizzy62695 I am having it on start up everytime using my own missions - thanks anyway for responding

  • @yawnos
    @yawnos 2 года назад +1

    I'm currently having an issue where once the plane hits bingo fuel the Data link system stops working, and I can't seem to figure out how to get it turn back on either that or its happening when i turn on the approach mode for landing. I do know the network box under the Clink page keeps flipping to off immediately after pressing the button though.

    • @deephack
      @deephack  2 года назад +1

      Approach mode will activate the TACAN system which is linked to COM2. This in turn will disable datalink. You can't use both at the same time.

  • @pochtronvirelune25
    @pochtronvirelune25 2 года назад +1

    super clear

  • @WaffenCat
    @WaffenCat Месяц назад

    199 not working

    • @deephack
      @deephack  Месяц назад

      Just tested this procedure and it still works fine for me. Do you have AWACS in your mission?

    • @WaffenCat
      @WaffenCat Месяц назад

      @ спасибо!
      Нашёл причину. (Аварийное радио).
      Привет вам из Сибири 👋❄️🇷🇺

  • @ashwinrajan6395
    @ashwinrajan6395 2 года назад +1

    Thanks brother

  • @Buzzard23100
    @Buzzard23100 2 года назад +1

    10086 is service phone number of china unicom🤣😂

  • @mahkhi7154
    @mahkhi7154 Год назад

    This JF 17 Doesn't Seem Real. Airliners A320neo Can be Fly By Wire "Auto Pilot" Controlled.
    Thats Because They Don't Make Sharp Sudden Evasive Manuvers.
    A Real Fighter Jet is Like the DCS Mirage 2000c Simulator.
    A lot of the Weapons on the DCS JF 17 and DCS F15E - Seam Unrealistic.
    Laser Guided Bombs. Paint the Ground with a Laser - You're Gonna Get Fired at Aswell.
    A Real Fighter Jet is Like the DCS Mirage 2000c Simulator.