One of the reasons i’d like to visit the US - learn about cars and get masterclass from such people. Engineering, metalworking, design, painting, electronics. Aaah. What a combo. Great project, gentlemen!
Haltech is an Aussie brand. developed and made here in aus. now regarded as one of the most versatile and capable stand alone ecu's on the market. so nice to see Australian equipment being regarded so highly that it's now making it into builds around the world.
Literally the only reason why I will be buying a Delorean. Because of this build. This is how I planned my build. LS, lowered, wide body. All the niche stuff.
That's because everyone knows what they're doing, and have a great work ethic. Most shops are full of burnouts with knowledge, but not much drive, and usually a drinking problem.
Lol it was also filmed over a longer time than alot of Chanel's do. You can watch progress on the car happen in the background over the electric truck build.
We built this car at the same time as the C10. Our main focus for the channel was the C10 so we didn’t go as in depth as this build. We wanted to give y’all a good overview of the build before we show you it in its entirety at SEMA! When we get back we’ll definitely be going more in depth with the tuning and everything that’s going to be helping this car make power!
I believe in actual reality they just needed to fit everything in. Sema is up and there’s not many days they have for editing and such. He said something along the lines of they had this car and the electric c10 built within 8 months for sema. Compare this to the c10 series that one is a lot longer and you can often also see the c10 in the backround of this video half finished. I think everyone wishes they can build a car this quick lol.
Dude I had to rewatch that part like 4 times. I would have crapped myself. He got super lucky that tank didn’t build more pressure and pop open injuring him. I still laughed, but damn.
@@SalvagetoSavage you guys BLEW MY MIND with the lights and the build in general. Your vision was so insane for this beauty. I have been to Sema enough times to know this thing is gonna get crazy attention
The headlights are so good, definitely gonna make similar ones for my car 👍🏼 most SEMA build not running. so for the amount of work you guys have done, we have no problem waiting another month or so to see this and the truck build finished and running
Tyler hovie put a LS in his Porsche and had to put a oil baffle in his oil pan because he raced it and blew the motor you might want to ask him at SEMA if he goes
After the first episode I knew this would be one of my current favorite builds on youtube. This episode solidifies that. After sema you should get the flares/bumper wrapped in carbon and run them raw. I think that would look incredibly sick and bring the rest of the trunk carbon together. Edit: To clarify by wrapped in carbon I meant actual carbon fiber and not some corny vinyl 3m wrap.
Otsuka Maxwell Design (You Tube) has done a DeLorean with a Kia 3.3L TT claiming 487hp. Matt Farah drove it and told us what a rattle trap it was, but the engine was amazing in that car. I hope S2S has sorted out the rattles and made it a solid car.
I'm from Belfast and the Delorean is a cultural icon of the highest magnitude for us car guys. This build is just a fantastic homage to my feelings for the car and it's impact. Thanks for doing this guys!
I worked on a brand new Delorean. Not a very well finished car, there were loose wires and unconnected relays and none of the carpet was fully fastened. In the back was a pile of other parts they forgot to install or expected the dealer to. Over the years (the owner only sold it last year) it turned out to be a reliable car and if you were good at sourcing parts it wasn't expensive to keep running. All the problems this one had when new was due to shoddy assembly like the fuel pump started to make a horrible noise that turned out to be it was never tightened properly. The wheel bearings and brakes are small but not expensive and light so find a good supplier or upgrade them. The owner also found a spring/shock kit that made a huge difference in looks and ride, he also remade the dash and center console. Both yours and his were a huge improvement over stock. The stock seats were awful too. On your car it looks like the centerline of the output shafts is ahead of the wheels, I wonder how this is going to work out.
Bad's ass car build on RUclips right now love them car's have since I was a kid and love to see it built up like this can't wait to see it at SEMA definitely going to be the one I'm looking forward to seeing keep up the good work
I cannot wait to see this thing finished! You guys are doing all the right stuff to help keep that classic look, but with modern technology integrated to make it all pop! Looking forward to seeing it running and driving!😁👍
Nice job boys, so impressed. The lighting is amazing! Don’t want to forget all the other stuff but from the outside looking in that dude totally nailed it for y’all!
You are either a terrific director or someone is really good at asking questions lol Definitely a great host for this; the video was so streamlined and I love seeing all the different “how to’s” highlights. The plugs were clean too, Bravo👏
wow... amazing. so crazy. great work. only bad choice (in my opinion of course) is the tape deck. thats one place you dont want an 80s feel. oitherwise ... stunning
DeLorean is so freaking beautiful car. Simple and futuristic. I wish I could afford one. As a comment to the video: when I saw that you guys cutting it, I was schocked, but in the end you did a great job! These front headlights are stunning! Cheers!
Amazing build this is my first video I’ve seen from you surprisingly but I’m now subscribed and definitely excited to see more there’s a lot of great craftsmanship that went into this build and it looks great
Fun fact, in Back to the Future during the clock tower scene when the Delorean started after Marty had headbutted the horn, This is actually possible because the wiring was so bad (bad enough for some buyers to be locked in their cars due to failing electric locks and no way to manually unlock them) that in some early to mid 1981 models that the horn and starter wires were crossed, Honking the horn would start that car and turning the key would honk the horn.
At first I didn't like the led light for the brake lights.... but once I saw it resembled the flux-copassator (spelling?), I saw it was very appropriate. Well done.
I have been following you for a long time, I have seen the entire process of S2Sesla and I feel that in this process I still have a lot to see…I would like and hopefully you will make more detailed videos of all the projects…those of us who like this world do not get tired of them …and even more so if it is with projects like yours… congratulations and keep making dreams come true…!!!
@@SalvagetoSavage Based up in the U.k makes me wish i was in the states. Anyway guys keep up the awesome job. Total respect to the work u guys are doing.
Not gonna lie, wasn't too sure on this one.... Love the DeLorean, love what you guys do in general and I've been a long time stalker of the channel XD, but you definitely have a new subscriber looking forward to seeing this finished...... great work Guys!!
Hi Tim, I have not seen you in 15 years since your s13 drifting with Ter-Tech. I love these Deloreans and can't wait to see the finished project. Oh I am Hannu the friend of Hannu T.
I would love to do the same with my 300zx Twin Turbo. I hate the tail lights but theres not many cool aftermarket options to try out. Nice work on the Delorean…. 😎 very cool!
This brought me genuine happiness watching this video.... I can not wait to watch this thing in its final form going for a Cruz.... bravo fellas. It looks amazing already
Even though I haven't even liked this video to help with the car I would still be super worried if even slightest bad thing happened to it. The thing is so unique!!!
This car since the movie Back To THe future took hold on my childhood, is my dream. The LS, Everything, you are building my dream. Allot of peoples dreams. keep it going. I cant wait to see the end.
It definitely is an acquired taste, but it was Tim's dream to have a widebody DeLorean! She'll definitely be a ripper once she's running. Thanks for the support and feedback!
this channel is a gold mine that I just found. how have you guys not gotten that much exposure or subs. The work and content put out is better than most channels with a million subscribers.
Man would have loved to see the rear lights do the full grid. Those running front lights are literally perfect for the build! My mind is blown!
I agree. The tail lights need the full grid. Why have unused space?
Redo it the same as the parking lights on the front. Full grid.
@@joshtheking1772 SEMA crunch probably, I bet they are going to work on a lot of stuff once the car is back.
I so agree
full grid FTW
One of the reasons i’d like to visit the US - learn about cars and get masterclass from such people. Engineering, metalworking, design, painting, electronics. Aaah. What a combo. Great project, gentlemen!
Thank you!
Haltech is an Aussie brand. developed and made here in aus. now regarded as one of the most versatile and capable stand alone ecu's on the market. so nice to see Australian equipment being regarded so highly that it's now making it into builds around the world.
Literally the only reason why I will be buying a Delorean. Because of this build. This is how I planned my build. LS, lowered, wide body. All the niche stuff.
We’d love to build another and actually get to finish it before someone bought it. So if you’re ready and have the funds let’s do it
Most youtubers would take 6 months to do a project like this! you rock. nocking out like a pro of pros!
It is absolutely insane how much you get done in 1 episode compared to other channels! Great job, keep it up!
That's because everyone knows what they're doing, and have a great work ethic. Most shops are full of burnouts with knowledge, but not much drive, and usually a drinking problem.
Lol it was also filmed over a longer time than alot of Chanel's do. You can watch progress on the car happen in the background over the electric truck build.
We built this car at the same time as the C10. Our main focus for the channel was the C10 so we didn’t go as in depth as this build. We wanted to give y’all a good overview of the build before we show you it in its entirety at SEMA! When we get back we’ll definitely be going more in depth with the tuning and everything that’s going to be helping this car make power!
@@SalvagetoSavage I love that we don't need to watch every second of build in real time. Just get to the meat a taters. 👍😁
I believe in actual reality they just needed to fit everything in. Sema is up and there’s not many days they have for editing and such. He said something along the lines of they had this car and the electric c10 built within 8 months for sema. Compare this to the c10 series that one is a lot longer and you can often also see the c10 in the backround of this video half finished. I think everyone wishes they can build a car this quick lol.
The Donny method is full afterburner. My man saw his life flash before his eyes. Really enjoying another out of the norm build.
Thank you! And Donny is still trying to regrow those arm hairs lol
@@SalvagetoSavage Looks like his arm got burned pretty bad, he needs a bit of paintwork on the tattoo :)
Dude I had to rewatch that part like 4 times. I would have crapped myself. He got super lucky that tank didn’t build more pressure and pop open injuring him. I still laughed, but damn.
@@SalvagetoSavage you guys BLEW MY MIND with the lights and the build in general. Your vision was so insane for this beauty. I have been to Sema enough times to know this thing is gonna get crazy attention
@@SalvagetoSavage HEY I KNOW HOW TO MAKE IT LOOK LIKE THERES FLAMES ON PAVEMENT.
The headlights are so good, definitely gonna make similar ones for my car 👍🏼 most SEMA build not running. so for the amount of work you guys have done, we have no problem waiting another month or so to see this and the truck build finished and running
Why cant u drive it
@Jim jibroni u can it's running lights they are going to install headlights and those taillights will be fine
@Jim jibroni literally everyone realizes this. they even made a point to mention it.
Tyler hovie put a Ls in his
Tyler hovie put a LS in his Porsche and had to put a oil baffle in his oil pan because he raced it and blew the motor you might want to ask him at SEMA if he goes
I just saw this car outside the Plaza Hotel (Biff Tannen's) in Vegas. One of the coolest things I have ever seen. The car is beyond perfect.
This has to be the ultimate ls project I’ve ever seen
Thank you!!
After the first episode I knew this would be one of my current favorite builds on youtube. This episode solidifies that. After sema you should get the flares/bumper wrapped in carbon and run them raw. I think that would look incredibly sick and bring the rest of the trunk carbon together.
Edit: To clarify by wrapped in carbon I meant actual carbon fiber and not some corny vinyl 3m wrap.
Was thinking the same
Finally a DeLorean with some real HP. Hope it goes as good as it looks!
It will once we get it all tuned up and firing right!
as you are, so are you.
They should race Nicks Kia Stinger swapped Delorean once this is finished!
Otsuka Maxwell Design (You Tube) has done a DeLorean with a Kia 3.3L TT claiming 487hp. Matt Farah drove it and told us what a rattle trap it was, but the engine was amazing in that car. I hope S2S has sorted out the rattles and made it a solid car.
@@SalvagetoSavage hunt down joshes supercharged ls deloren @lsdelorean
I'm from Belfast and the Delorean is a cultural icon of the highest magnitude for us car guys. This build is just a fantastic homage to my feelings for the car and it's impact. Thanks for doing this guys!
you seen the one at the transport museum? it's falling apart 💔
@@TheStriker0525 so like just out of the factory
I worked on a brand new Delorean. Not a very well finished car, there were loose wires and unconnected relays and none of the carpet was fully fastened. In the back was a pile of other parts they forgot to install or expected the dealer to. Over the years (the owner only sold it last year) it turned out to be a reliable car and if you were good at sourcing parts it wasn't expensive to keep running. All the problems this one had when new was due to shoddy assembly like the fuel pump started to make a horrible noise that turned out to be it was never tightened properly. The wheel bearings and brakes are small but not expensive and light so find a good supplier or upgrade them. The owner also found a spring/shock kit that made a huge difference in looks and ride, he also remade the dash and center console. Both yours and his were a huge improvement over stock. The stock seats were awful too.
On your car it looks like the centerline of the output shafts is ahead of the wheels, I wonder how this is going to work out.
Okay so, acetone+fueltank+fire= a freakin’ JET ENGINE!
Excellent decision in keeping the tape deck, gives it a retro look hard to achieve without it.
They could have also used a Blaupunkt Bremen. It looks exactly like an 80's euro tape deck but it has modern features and can drive a high end system.
@@madmatt2024 That sounds awesome.
They would have ditch the tape deck but it has his Mom's favorite REO Speed wagon cassette jammed in it.
Hi Infidelity is a classic.
i think my favorite thing about this channel is seeing "THE MAN" elbows deep with the guys.
A lot of georgous work on there, am specifically looking forward to Kyzas design and your combined result (not even halfway through yet).
Bro first time watching and i can tell this is the only channel that talk less and do more wow im impress subbed. Keep it up
This is how a DeLorean sould've been from the beginning. A badass engine, with some sick HP.
That Dorito chip joke about the gas tank on the Delorean made me laugh XD
Just found your build Very impressive build fellas with a real power plant thumbs up from England 🇫🇴✌️👏👏👏👏
"It's edible once" 🤣😂🤣
Bad's ass car build on RUclips right now love them car's have since I was a kid and love to see it built up like this can't wait to see it at SEMA definitely going to be the one I'm looking forward to seeing keep up the good work
My 1st time watching, not only is this project incredible, I have never seen a video this dense with content. Subscribed.
Love the lights. Not crazy about the wheels and fenders poking out that far.
but thats what the 80s were about! flat looking car with broad shoulders and hips
cant be any uglier then the day it was built
Damn Timmy, looks soooooo good!! Amazing work.
And man you guys jumped from ~70k to 120k subs so fast! Congrats, totally deserved 😎
these guys are doing so much work in so little time, phenomenal job guys, i'm loving it
Thank you!!!
@@SalvagetoSavage No problem, I can't wait to see the bright future of this channel!
WoW! What a Concept! The DeLorean has always been One of my Favorite Cars... What a Awesome Job you' have done!
Thank you!
And iconic car that you gentlemen turned into a piece of artwork. What a beautiful beast this is going to be. Can’t wait to see more!👍🏼🤩🫡❤️
Those lights are dope with that body kit 😎👌🔥🔥🔥
those front lights are spot on perfekt 👌
Front lights are saaaavage
Those headlights 🤤
Wide body kit looks retarded af imo but the rest is stunningly rad and looks like a dream to drive and own..
@@88_TROUBLE_88 I feel you. They have no creativity at all. just bulky fenders.
So Freakin Amazing!!!
This a Super DeLorean . . . have a feeling The Doc would be proud of this creation!!! 👍👍❤😃💯💯
I cannot wait to see this thing finished! You guys are doing all the right stuff to help keep that classic look, but with modern technology integrated to make it all pop! Looking forward to seeing it running and driving!😁👍
this should be part of a version of the Delorian (Deluxo) in Gta Online so awesome !!!
QUICKLY Becoming my Favorite RUclips Channel! You guys came out SWINGING!!! Amazing job on the S2SLA and the DeLorean was/is (IMHO) the Best one yet!
This is so good! No half hour videos about installing a (sponsored) seat like a lot of other build-channels.
Nice job boys, so impressed. The lighting is amazing! Don’t want to forget all the other stuff but from the outside looking in that dude totally nailed it for y’all!
Steve is an LED magician!
You are either a terrific director or someone is really good at asking questions lol Definitely a great host for this; the video was so streamlined and I love seeing all the different “how to’s” highlights. The plugs were clean too, Bravo👏
Thank you!
Thanks for including the fuel system layout, and naming the software used in the build. Details will set you apart.
Awesome work. Only thing wrong. The red and pinky seats and dash. It shouts pimp. Don't gel the make of car.😮
"LS-Delorian" - hah.. get it.. hard psychoactive substances - I'm hilarious.
We appreciate the pun! lol
I love this car!! I feel like you should make the taillights do a sideways “U” to match the original DMC logo. Keep up the awesome work
Poor Delorean
I totally agree 🥹
Still better than the car rusting in a barn
@@srnfr270 DeLorean's body is made of stainless steel. So, it doesn't rust.
@@paulocastro7884stainless steel does not mean no rusting..it is actually less rusting 😂😂😂😂
Also the frame is epoxy coated steel. It can and does rust
Didn’t know you guys were in boca! Sick ass builds man keep it up. Definitely just earned another sub
wow... amazing. so crazy. great work. only bad choice (in my opinion of course) is the tape deck. thats one place you dont want an 80s feel. oitherwise ... stunning
You guy's are freaking awesome, always thinking outside the box 👍
Trying our best to stay weird! Thanks for the support!
Wide body kits are the worst thing you can do to a car, specially a DeLorean. I home the car is salvageable after this.
despite the economic crisis i still think this is a right time to start up an investment
Stocks are good but crypto is more profitable
Investing in crypto now should be in every wise individuals list, in some months time you'll be ecstatic with the decision you made today.
Most intelligent words I've heard.
Crypto is the new gold
I wanted to trade Crypto but got discouraged by the fluctuations in price
So nuts man one of the coolest builds I've seen
Man I had an idea to something like this like 4 months ago this is a nice build beautiful fellas it's looking really good.
Am I the only one that thinks this looks like crap. Like the engine upgrade is the only thing that’s good about this thing
There are trick bits everywhere you look on this thing but the lights . . . that's just beyond.
Incredible work, I'm going to have to check out your other videos, have only watched 1&2 of the DeLorean.
I can't wait to start my electric delorean project , I can't believe how. many parts you need for a ice car , crazy amount
It's insane. Electric cars need a fair bit to run as well. Definitely check out our EV C10 build if you haven't already!
DeLorean is so freaking beautiful car. Simple and futuristic. I wish I could afford one. As a comment to the video: when I saw that you guys cutting it, I was schocked, but in the end you did a great job! These front headlights are stunning! Cheers!
Thanks so much!!
Amazing build this is my first video I’ve seen from you surprisingly but I’m now subscribed and definitely excited to see more there’s a lot of great craftsmanship that went into this build and it looks great
THAT IS MOUTH WATERING. awesome re imagining. can we please work in the flux capacitor ? pleaseeeee
We'll try to find some place to fit it! lol
This project is incredible. Great work everyone!
Thank you so much! Glad you like it!
Love the honesty! Projects with hard deadlines are just like that. They need that little extra to reach the goal
Wow, way cool lights, nice wide body kit, great job! Thanks for sharing your time and photos!
Thanks for watching! We really appreciate it!
It looks sick slammed with those wide tires and the stainless body panels look great in contrast with everything
Thankyou!
potentially the coolest car build on youtube
Thank you!
I work at Valhalla Resto in NJ, we've done some cool shyt, but that thing is next level, PROPS.
Thank you!
Fun fact, in Back to the Future during the clock tower scene when the Delorean started after Marty had headbutted the horn, This is actually possible because the wiring was so bad (bad enough for some buyers to be locked in their cars due to failing electric locks and no way to manually unlock them) that in some early to mid 1981 models that the horn and starter wires were crossed, Honking the horn would start that car and turning the key would honk the horn.
3:59 did that with a xylene barrel once. Glad to be alive.
The lightning is pretty incredible!!!
Thank you!
At first I didn't like the led light for the brake lights.... but once I saw it resembled the flux-copassator (spelling?), I saw it was very appropriate.
Well done.
Thank you!
@@SalvagetoSavage Yes Sir.... that DeLorean is kinda savage.
This build is nothing short of a Delorian fans wet dream.. Great job!!
I have been following you for a long time, I have seen the entire process of S2Sesla and I feel that in this process I still have a lot to see…I would like and hopefully you will make more detailed videos of all the projects…those of us who like this world do not get tired of them …and even more so if it is with projects like yours… congratulations and keep making dreams come true…!!!
Thank you so much for all the support! We really appreciate it!
Best built I've seen in a long time
I’m glad you’ve kept the iconic car from an awesome movie alive. Definitely subscribing.
If you love DeLoreans we got a factory tour coming up showing you guys what DMC has been up to recently!
@@SalvagetoSavage Based up in the U.k makes me wish i was in the states. Anyway guys keep up the awesome job. Total respect to the work u guys are doing.
Not gonna lie, wasn't too sure on this one.... Love the DeLorean, love what you guys do in general and I've been a long time stalker of the channel XD, but you definitely have a new subscriber looking forward to seeing this finished...... great work Guys!!
Thanks so much for the support! We're glad you took the leap and hit that subscribe button lol
Hi Tim, I have not seen you in 15 years since your s13 drifting with Ter-Tech. I love these Deloreans and can't wait to see the finished project. Oh I am Hannu the friend of Hannu T.
I would love to do the same with my 300zx Twin Turbo. I hate the tail lights but theres not many cool aftermarket options to try out.
Nice work on the Delorean…. 😎 very cool!
Thank you!!
That lense on the close up angle, doesn't do you any justice my friend 😄 Amaizing project!
This is some GTA 5 stuff right here
Literally the most progress I’ve seen from most 10 minute videos
Back to the Future has just gone to a new dimension
damn best build ive seen on RUclips in awhile lmk when your in west tampa to see it in person
Appreciate it bud
Seen both at sema and got the leen customs pins of the delorean and the c10…. Good work
Delorean is the best looking car I swear🔥
Wow again you guys knocked it out of the park.
Thank you so much!
This brought me genuine happiness watching this video.... I can not wait to watch this thing in its final form going for a Cruz.... bravo fellas. It looks amazing already
That’s awesome!! Thank you so much
@@SalvagetoSavage you're welcome and thank you for the entertainment!
Yeeeaahh, those lights are amazing! Both front and rear!
Even though I haven't even liked this video to help with the car I would still be super worried if even slightest bad thing happened to it. The thing is so unique!!!
Hello I’m working a similar project on a 1uz engine , swapped to a Subaru BRZ
I wonder if I could send you some messages I have some questions about your set up .
Shoot us a message on instagram!
That's freaking sick. So retro futuristic!
That thing looks amazing, great job man.
This car since the movie Back To THe future took hold on my childhood, is my dream. The LS, Everything, you are building my dream. Allot of peoples dreams. keep it going. I cant wait to see the end.
That lighting was super sick!
Thank you!
I’ve always wanted to see this done to a DeLorean!!!!!! Thank y’all so much! Great stuff!!!
I was randomly wondering about built DeLoreans bc i never seen one. Had to watch this and see what people can do to one.😂
A lot of work put into it. It’s not my style with the seats and wide body, but everything else is awesome. Will be cool to see the finished product
It definitely is an acquired taste, but it was Tim's dream to have a widebody DeLorean! She'll definitely be a ripper once she's running. Thanks for the support and feedback!
this channel is a gold mine that I just found. how have you guys not gotten that much exposure or subs. The work and content put out is better than most channels with a million subscribers.
She’s really back from the future !!!
One of the rarest cars in the world and you destroyed it.
Not even close to being one of the rarest cars in the world!
@@SalvagetoSavage semantics, still incredibly rare. Ruined
Holy moly the amount of content you guys put in per episode. Awesome for us, but find time to chill as well!
Gas tank jet engine shot was awesome!
Donny doesn’t always remember to turn the go pro on, but when he does, he almost blows up lol
RUclips algorithm brought me here and it did not disappoint. Looking forward to the next installment.
Ufff ese DELOREAN DMC llegó del año 5000 para quedarse