is this frame air unit friendly? ( it seems there are two slits to fit the 2 antennas ) and can i also reverse the esc so i can route the xt60 through the back? does the light at the bottom come with the frame or is that from the stack? i plan to buy this frame and use T motor parts. i just find it sad they stopped making speedybee fs225 v2 frames, they were perfect for use with air units.
I built this drone on my own, using this frame, a bit worse SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack but it performs very well. I put there Walksnail WS-M181 GPS and O3 Air Unit as well ELRS receiver but motors what else than Wasp Major😁 And I'm very satisfied with it and it was also cheaper 😉
@@chewthis5805 The drone was about $560 in my case, but it depends on what components you use and for how much you buy it. I used these components: SpeedyBee F405 V3 + 50A BLS DJI O3 Air Unit SpeedyBee Master 5 V2 frame RCinpower Wasp Major 22.6-6.5 1860Kv HQprop 5x4.3x3 V2S Durable WALKSNAIL WS-M181 GPS
They're both amazing, i'd probably go for the evoque because it has better motors, but the Master5 is more configurable (and much easier to, as well), they both have the same range pretty much.
I own this SpeedyBee Master 5 V2 HD DJI 03 ELRS 🥰 with a radio master tx16s 😎 such a beautiful drone, best looking by far and the fly is soooo smooth and she's FAST ASF 😎
Thanks for your videos and the list of drone gear you use listed in the description. Any recommendations for forums or sources to read more about components for drones?
Facebook groups! They are the only thing good on Facebook nowadays and plenty of people would share their experience & recommendations. Check out Blacksheep FPV FB Group or any random FPV group you find, you'll find good people and lots of help.
DJI o3 is the latest video transmission system from DJI. it works with v2 goggles / goggles 2 / integra... it also can transmit radio control to your controller ONLY if you have a DJI controller (which suck) so really its just used for video for anyone serious and you'd run ELRS with a radiomaster remote or another remote with ELRS capabilities.
@@Nullscr1pt can u help me.. i want to get 1 im new even never buy a drone.. but im confused about all this thing analog or 03 with Pnp, tbs, elrs.. whats the different.. which 1 i can use with controller tx16s and the Google im planning between hdzero, or orqa been 2 days googling im more confused to many differences 😅
Your lucky to get a free Quad from speedybee. I thought about buying the frame but I got the source one v5 for now cuz I'm going to beat the Hell out of it.
Hi Friends ! Anyone using SB V3 Stack?? I cant make the OSD work on Uart 4 as in manual. with the O3 plug. Anyone can help?? Thank you I removed the Ground and R2 wires from the plug.
![☀ Дрон-пятёрка на DJI O3. Смена правил игры? [Speedybee Master 5 HD]](http://i.ytimg.com/vi/AP2R9yqADow/mqdefault.jpg)
![☀ Дрон-пятёрка на DJI O3. Смена правил игры? [Speedybee Master 5 HD]](/img/tr.png)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This is on my 'bucket list' of quads to own....Always appreciate the review Mike! Looks like such a fun FPV to fly....
Thanks Ron!
Hello! im looking for bnf 5inc quad. Looking for speedybee Master 5, geprc mark 5 or nazgul. Any advice?
Just got one brand new bind and fly elrs and o3 for $170! Love how it flies
Such a great overview and your editing is spot on!!
Number one on my next purchase. Excellent work 👏 on this instructional review.
I am looking forward to buy the speedy bee or the geprec mark 5… can you recommend one over the other for freestyle
I just got one delivered. Seems to be really good.
AddictiveRC has them in stock now. With GPS installed. Nice Review.
I want to buy one but I don't know if it's built.
is this frame air unit friendly? ( it seems there are two slits to fit the 2 antennas )
and can i also reverse the esc so i can route the xt60 through the back?
does the light at the bottom come with the frame or is that from the stack?
i plan to buy this frame and use T motor parts.
i just find it sad they stopped making speedybee fs225 v2 frames, they were perfect for use with air units.
fantastic video. Wich lippo do you suggest for mid long range?
I built this drone on my own, using this frame, a bit worse SpeedyBee F405 V3 BLS 50A 30x30 FC&ESC Stack but it performs very well. I put there Walksnail WS-M181 GPS and O3 Air Unit as well ELRS receiver but motors what else than Wasp Major😁 And I'm very satisfied with it and it was also cheaper 😉
Sounds like a great build 👍🏼
How does it cost? I really interest in this frame too
@@chewthis5805 The drone was about $560 in my case, but it depends on what components you use and for how much you buy it.
I used these components:
SpeedyBee F405 V3 + 50A BLS
DJI O3 Air Unit
SpeedyBee Master 5 V2 frame
RCinpower Wasp Major 22.6-6.5 1860Kv
HQprop 5x4.3x3 V2S Durable
WALKSNAIL WS-M181 GPS
@@Tomcat2_kanal ohh.. That's nice. I'll try build like this too. Thanks for your info man.
Hello, 🇪🇦 nazgul evoque or speedybee master 5? which drone is better and for medium range? Personal opinion, which one would you buy? thank you
They're both amazing, i'd probably go for the evoque because it has better motors, but the Master5 is more configurable (and much easier to, as well), they both have the same range pretty much.
Speedybee mate it's a beauty
will it be cheaper if I buy it ready to fly or if I buy it in parts and assemble it myself
Nazgul Evoque F5 V2 O3 vs SpeedyBee Master 5 V2?? because I'm seriously in doubt witch one I want. :D
thanks. I have just purchased this one drone. I hope it will be very nice choice.
Ah man. I'm building mine now but didn't get the lens cover.
I own this SpeedyBee Master 5 V2 HD DJI 03 ELRS 🥰 with a radio master tx16s 😎 such a beautiful drone, best looking by far and the fly is soooo smooth and she's FAST ASF 😎
On My speedybee app there's no dedicated icon for led strip am i missing something?
hello, wich dji recomend for vtx: DJI O3 air unit y Receiver: TBS Nano
Would you recommend this as a good frame for a first attempt at doing my first build?
I love ny Bind n Flys, but really want to try doing a build.
Yes, it’s a very solid frame!
Thanks for your videos and the list of drone gear you use listed in the description. Any recommendations for forums or sources to read more about components for drones?
Facebook groups! They are the only thing good on Facebook nowadays and plenty of people would share their experience & recommendations. Check out Blacksheep FPV FB Group or any random FPV group you find, you'll find good people and lots of help.
@@DroneSupremacy Thanks a lot 🙌🙌
Hi pal! What battery you use, i saw cnhl but struglle what capacity is it
what's the flight time with that battery?
about emax motors, propwash isn't necessarily due to them, even shitty motors won't produce prop wash when PID and filters are setup properly.
Yeah that's why i mentioned i might need to finetune it to see if I can get rid of it
Is it possible to buy the analog one and change the VTX to HDZero?
yes
@@DroneSupremacy okay thanks! which one would you recommend more, this one or the Beginner DIY FPV Drone Kit - QAV-S 2 Joshua ?
The dji O3 thing means it can transmit Hd video to the googgles?
DJI o3 is the latest video transmission system from DJI. it works with v2 goggles / goggles 2 / integra... it also can transmit radio control to your controller ONLY if you have a DJI controller (which suck) so really its just used for video for anyone serious and you'd run ELRS with a radiomaster remote or another remote with ELRS capabilities.
@@Nullscr1pt can u help me.. i want to get 1 im new even never buy a drone.. but im confused about all this thing analog or 03 with Pnp, tbs, elrs.. whats the different.. which 1 i can use with controller tx16s and the Google im planning between hdzero, or orqa been 2 days googling im more confused to many differences 😅
Your lucky to get a free Quad from speedybee. I thought about buying the frame but I got the source one v5 for now cuz I'm going to beat the Hell out of it.
Lucky might not exactly be the word here, but I agree about the source one - it's hard to beat for that price!
@@DroneSupremacy thanks 🫠
Hi Friends ! Anyone using SB V3 Stack?? I cant make the OSD work on Uart 4 as in manual. with the O3 plug. Anyone can help?? Thank you
I removed the Ground and R2 wires from the plug.
if you want HD OSD, you want to use Betaflight 4.4.x or higher. you have to set the canvas to HD and you have to set your UART to MSP + DisplayPort
Aku suka
I bought the frame…it’s been a nightmare. They drilled the wholes wrong so the long arms only go on the back. Terrible instructions too
the analog version is much cheaper and a really good deal
As any other quad that is analog nowadays :) it's always much cheaper and a good deal!
@@DroneSupremacy I get you but if you want people to go to your affiliate link and or inform people of the other prices that would be fine
Do they tell this Trump with the controller?And everything you need to fly
Speedebee only from poland