Winchester Gun Safe - Unbox, assembly and review
HTML-код
- Опубликовано: 7 сен 2024
- Please make sure to subscribe my friends below. They offer a lot of great content.
Front Seat Driver www.youtube.co....
4 Guys Talking Cars www.youtube.co....
B Mason www.youtube.co....
The Gearhead Lounge www.youtube.co....
Protective Dad Pranks www.youtube.co....
R/T Life www.youtube.co....
OC Modivator / ocmotivator
As a locksmith for 34 years I would advise you to always change the combination with the door open. If you make a mistake and can't get it open it's gonna get costly.
Thanks so much. Great advice!
That's why there's a master reset key. It does day in the booklet to change the combination with the door open and to repeat the combination several times before closing it.
@@jeremiahdunaway3002 Yeah, you know most guys though, not going to read instructions till we get deep in trouble. LOL
Dave is this ual locking system….can we depend on this to be dependable?
Facts. If a mistake is made id prefer it to be oppen the closed.
FYI... May I suggest you strengthen the shelves with 1-2 inch wooden strips or aluminum angle. I had both shelves in my Winchester safe collapse under the weight of my ammo. Look at the shelves in this video after the ammo is loaded; both of them are already sagging. It took me hours to clean the mess up off the bottom of the safe. I reinforced them with a 2X4 which I ripped in half on a table saw. I used two halves cut to length and then fastened the shelf to the studs. Never had an issue since, and it's been 10 years.
Dang what a mess. I moved all my bullets to the bottom just after the video. I was a little concerned about the center of gravity. Great tip Jeffro.
Another cool thing is if you use compression tape around the inner edges you can get the door to shut flush and take away the play in it
is the winchester just cheap chinese
@@davidfauthsrfauth3244 Yes, I bought one 3 mo. ago and find it to be pretty looking junk. I commented about it above.
Don't waste money on a safe.. This safe works great to keep things safe. If someone wants in they will get it. Never keep money silver gold in safe. Liberty safes are 4x the cost and can be broken into just as easy.
Bought this today for 499, nice sale. Not as beefy as my older similar sized Stack-On, but happy with the deal.
Great to hear. I think you will like it. Mine is still going strong with no issues.
Got this one today for $500 plus tax. Not bad at all! Thanks for the helpful video, earned my subscription 😊.
I really appreciate that. 1 year later I am as happy or even more so than the day I got it. I hope you are happy with yours too. Hope to hear from you in future videos. I answer every comment so look forward to that conversation. Thanks again for subscribing!
@@DadsGarageDIYDon’t regret buying it at all, good enough space for firearms, documents and money. No problem, look forward to seeing your content. Happy holidays!
@@Yan-sm6nb You too!
Did you get it through tractor supply? And if so, do they ship to your house and bring it inside ?
@@yohazem1 I did get it from Tractor Supply. I picked it up. I’m not sure if they deliver and bring inside or not. No way we would have gotten it in if I didn’t have big strong kids. It is really heavy. TS loaded it with a fork lift.
I have this exact gun safe. Extremely happy with it. Thinking of purchasing another just for ammunition and documents.
I feel the same. I have had it now since I did this video 2 or 3 years ago and couldn't be more happy with it. Thanks for the comment Roger.
Thank 😅😊you for setting the code process. I was looking for a video on the steps. I was trying for hours to set mine.
Very welcome! Hope you will subscribe and find some other content valuable. Much appreciated!
That looks just like the safe my dad has but his is a much older model.
If that's the case maybe it will hold up well. I really really like it. Seems super strong. Very customizable inside. Works perfect for me.
That’s a nice safe. I might need to get one to keep other stuff in it as well.
If you need one this size I would certainly recommend it.
Hubby and I have always wanted to have one for all his guns and rifles! Awesome looking Tim! Great deal- I will tell hubby!! Don’t know where we will put in new home since first floor is living room, kitchen and breakfast nook. Lol.
You all will figure it out for sure. This one is just the perfect size for us. Not too big. We didn't want to give up a bunch of space either. It's nice for sure.
That is a very nice safe. Its nice and big to store everything.
Yep. I love it!
.... everything?.....
I just purchased this safe. Thank you for this awesome and very informative video!
Thanks 357. Really appreciate that. New gun video out tomorrow at 4pm central. Look forward to you thoughts and comments. Thanks again.
@@DadsGarageDIY The safe was surprisingly easy to setup and I was also surprised by the quality I got for the money. I paid $599 on sale. There nothing close to this safe for that kind of money. Seems the price ranges from $599, $649 and $699 depending on what kind of sale Tractor Supply is offering at the time you purchase.
@@MAG-li5jo I would agree with you 357. I have been tickled to death with mine. Great quality. Great function. Great price for what you get. Thanks for the comment my friend.
Did it come with 2 backup keys to enter the safe if the lock fails ?
Yes it did.
Nice video with one small exception, inside view only showed top half.
Thanks George. Really appreciate that. Look forward to our next chat in the comments!
@@DadsGarageDIY you’re welcome. I look forward to your other videos. 👍
deadly con is only one way in, if that is broken for some reason you will have some fun opening it.
The safe is OK but the lock is crap. I replaced it with a S&G and now I'm satisfied. As far as fire protection, put docs and sensitive items in fire resistant containers inside the safe.
Love the advice. Thank you!
I keep getting triple beeps after typing in only 5 numbers for new code and not 6. I'm doing everything correctly but it's not working
Just bought one March 2024 and it was same price $599 but that was on sale and $200 off
Awesome deal!
Hi, how difficult was it to move it into the house? I am considering purchasing this safe just a bit concerned about getting it the stairs in my house. Thank you.
VERY!!! If I hadn't had my ultra strong son here it would still be in the garage. We first of all had to get it out of the back of our pickup. That wasn't easy then getting it in the house was something. We have about a 10" rise heading in. Only room for 1 inside the house and 1 outside. It was not fun. If I ever move I pity the movers.
Thanks again for your help.
@@jbaccell Very welcome!
Well, I made the purchase and had my son-in-law help me get it up the steps. Boy was it a challenge, it is quite heavy. Your video is one of the reasons I made the decision to purchase this safe and I am so glad I did. It is leaps and bounds over the many others I was looking at. $499.00 for a very nice safe. Thanks for your help.@@DadsGarageDIY
@@jbaccell Thanks for following up with me. I am glad you like it. I feel the same as you about it. Very good quality for the money in my opinion. I hope you are subscribed and I hope to hear from you on some other videos.
You should have the door open and locked when changing the combo in case something goes wrong at least it will be open
Great comment Bill. That would be the wise way to do it. Thanks so much. I look forward to future conversations!
There is no tax in some states on safes - I know there is none in TN.
WOW. That’s awesome! In Texas pretty much everything is taxed except food and medicine.
@@DadsGarageDIY it’s pretty great. I think it started in 2021 and goes until 2025 or something like that.
Same here in MM. No sales tax on gun storage.
How did you adjust the shelves I’m having trouble getting them adjusted
It is a pain. I assume you're talking about the clips?
@@DadsGarageDIY yes
@@austinmaberry3705 I filmed this a few years ago but I believe I showed how I did it. It was a real pain. I put jaw protectors on some channel locks (so I didn’t scratch the paint) and pinched the clips. It was slow at 1st. But as I got the technique down it went a lot quicker. Good luck and I look forward to hearing back from you.
I bought bigger one that holds 36 guns on black friday this yr guess its a good safe but the shelfs are weak so I wouldn't trust them holding my ammo an if i want power in it to run lights an a dehumidifier i have to drill an leave a hole in it which im not ok with
Mine has some holes in the bottom with a plug in them. You're larger one doesn't have those?
Wow awesome video! I've been looking for a new safe. I'll have to check this one out
I love it. And also recently released a video on a dehumidifier for it and this Thursday lighting for it. Hope those are helpful too.
Idk if it was the delivery company or the actual company but my buddies liberty safe got delivered in a refrigerator box which I always thought was smart
Interesting. Good hearing from you Brandon.
I would HIGHLY recommend you buy fire bags for cash, documents, hard drives, etc. Gun safes are HORRIBLE for fire protection regardless of what they say.
Very interesting. I did not know that. Have to look into it. Thanks GlockMan!
Would this be fine having on the second floor of an apartment?
I think it wouldn't be a problem. I would check with the management and get their blessing 1st. But, there are people that weigh as much as this safe so I don't know how it couldn't be ok. But, it's going to be a booger getting it up there. Great question. Look forward to the next conversation!
I’m
Hitting 123456 and it won’t open it beeps twice fast
Sorry for the delay. Did you figure it out?
Price isn’t bad at all!! I’ve priced small ones for $150. No where near the quality of the Winchester.
I have seen some cheaper but they also felt cheaper. This one feels legit.
been looking at the Winchester safes, thanks for the vid oh, and that's a great tip on the shelf clips! Are you thinking about adding lights to the interior?
Thank you. Glad it helped. Funny you mention that. I did a video on a dehumidifier for it and have one one lights for it releasing next Thursday.
How did you unbolt the bottom pallet that is screwed on? The nuts are welded down
Hi Chris. The bolts come through on the inside of the safe. You can use a socket. Hope that helps sir. Have a great day!
Do you know what the Allen key contained in the TS26-45 parts bag is used for? That is the only thing that came with the safe that I have not found a need for.
Very good question. I don’t remember and I guess I haven’t needed it. I have no clue where it is. Lol. Maybe someone reading the comments will know. Good hearing from you again 357.
I just got my safe and the allen key is for the 4 screws either on the left or right side of the inside that helps with the play of the door if you loosen the screws you can arrange the plate so that there is no play on that doo works perfect
I'm having a hard time getting the clips off so I can remove some of the shelves.
I had a very hard time with that too. I used channel locks with protectors on them so I didn't scratch off the black paint. I made the video a while back but I think I show that in the video. It's a pain for sure.
The ones holding the shelf in are upside down. Just push down on the end of the clip to release it from the bracket.
@@jeremiahdunaway3002 Great info. Thanks Jeremiah.
@@jeremiahdunaway300212 and 2023 you're a lifesaver brother thank you for that
It “might” let you know. Freaking RUclips needs to get their act together. People work too hard on videos for notifications to not go out.
I agree! Maybe I would get more than 30 views on a video but seems like most aren't getting the notices.
Can we get a 6mo update on this safe - Pros, Cons and overall thoughts?
Hi Jim. Sure can. I am loving it. Zero issues with it. Really I have nothing negative to say. It does everything it is supposed to do and I haven't found a single thing wrong with it. The shelf clips that I refer to in the video are a pain but after that nothing I can complain about. Thank you Jim.
Ok but is the locking system dependable?…very expensive if it will not.
I'm interesting in hearing more input on that too. I'm no locksmith so I wouldn't know. Seems very solid from a novices point of view.
mine came with a key over ride
Has anyone had an issue with programming a new code? I follow every step exactly but when typing in new code it beeps after only 5 digit instead of 6
I have not. I have not heard of that before. Here is their tech support phone # 888.420.0416 Let me know how it goes. And please hit that subscribe button. Really helps me out. Appreciate you sir.
@@DadsGarageDIY ty! Subbed!
@@AgoristsAxioms Thank you so much. Really appreciate it.
Happened to me ,also .I called for help & they told me to follow the procedure in the manual quicker with less pause. I tried it & it worked. Try picking up the pace when you put in your own code. Also make sure your battery is strong.
When you removed the shelves on the unboxing. Did you just rip the clips out with your hands? It didn’t look like you used the channel locks until you talked about reinstalling the clips. Thanks!
That part was a beating until I figured out the technique. I was able to get them out but not in with my hands. I did get the channel locks to pinch them down a bit to install them.
@@DadsGarageDIY What was the technique? I've tried up, down, left, right and can't get them to budge.
@@darrelldaman8724 Hi Darrell. Are you referring to the shelf clips?
@@DadsGarageDIY Yep! I'm having the hardest time getting them to come out so I can replace the shelving where I want them.
@@darrelldaman8724 I had heck with them too. I got some channel locks and put some of those plastic tip covers on them so I didn't tear up the paint on them. Then pinched them with the pliers and I was able to get them in pretty easy. By hand....no way! Good luck with it. Let me know how it goes.
Is there a way to tighten the door play after it is locked? Otherwise , this is a great safe for expanding my arsenal, that is why I bought one.
Should have very little play. But, I suppose you could put a little thin strip of the rubber weather stripping with the adhesive backing. Let me know how it does.
@@DadsGarageDIY I found two plates along the right edge of the inside of the safe attached by two screws each. Loosened the top two &slid the plate out toward the back of the safe & retightened. The bottom screws wouldn't budge without possibly stripping them. The door fits tighter , now, when closed. That is what the Allen wrench must be for. I'll get a better Allen for the bottom ones !
@@Issacwayne22 Very interesting. Glad you got it!
Did what you suggested . It is tighter , but had the same problem w/ the bottom plate so I' get a better Allen also , thanks !
@@Issacwayne22 Anytime sir.
How does one exchange the lock on Winchester gun save?
Hi Gene. Are you referring to changing out a bad lock?
Great video! One question sir, the metal from the bottom for the forklift, those are unscrewed from the outside or the inside?
Thanks so much. They would be unbolted from the inside. The nuts on the bottom are welded onto the "bracket". I have more videos coming on this safe. I have one on lighting for it and one on a dehumidifier for it. They will all drop in the next 3 weeks. Every Thursday is when my new full length videos drop each week.
@@DadsGarageDIY awesome! Thank you! Can't wait to see those videos
@@imranbangali11 Thanks so much Imran!
Thank you for this video!!
Thank you for watching. Really appreciate it. Please subscribe if you are not already. Really helps me out. Thanks again!
Subscribed 😊
@@ca8746 Thank you so much!!!!
Did anyone leave the metal skids on this stayed at the very bottom for stability?
I actually did that. I liked the extra stability on carpet. Plus I didn't want to mat the entire area.
@@DadsGarageDIY awesome. I think I’m a do the same. I have a wood floor; may have to lay something under it.
@@c.juneau410 Yeah. I would put some rubber pads under it. Good to hear from you again C. Juneau.
I did
great view of this safe is it made in the u.s.a or is it a chinese the cost seems super cheap
Very good question. I would have to bet it is China. But, don't know that for sure. Thank you sir.
How change code
See if this article will get you what you need. Let me know. howtohomesafety.com/change-the-combination-on-a-winchester-gun-safe/
These safes can be tore open in less than 2 mins door open in less than 2 mins. These are fire safes and keep kids out not save valuables from break in.
I have heard this many times now. That’s wild that you can’t have a safe that can be so easily gotten into. Thanks B.C.
any safe can be defeated in a matter of minutes with the proper tools
How do you change the battery
Hi Roman. You turn the keypad and it will then come off in your hand and the battery sits behind the keypad. It's one of the easier ones that I have seen. Also behind the keypad is where you find the manual key override. Great question!
@@DadsGarageDIY its a Winchester pony safe,so which way we turn it ,it's our first time
@@romanchairez8825 There is a little button on the bottom. You push it in then turn it counter clockwise. Not sure about the pony but that is the way this one is done. Hope that helps.
We already got it thanks for your help
Is there a pre-drilled hole in the back to run electric cable for a lockdown golden rod dehumidifier?
There is not. The only holes that I have identified are the ones in the bottom where it bolts to the "skids". Great question. I have a video on a wireless dehumidifier. Look it up so you can stay away from it. LOL. It seemed good at 1st. But, it has to be "recharged" every few days. It's almost useless. I'm looking for something different. If you have any recommendations please let me know.
I just picked up this exact safe a few weeks ago. Is it normal for the door to have some wiggle/play after it’s locked? It’s kind of annoying
That would be. Mine doesn’t have any play in it. Mine works perfectly. What a pain if you have to go swap it out. Ugh! Good luck Matthew. Let me know how it turns out.
@@DadsGarageDIY UPDATE: There are two brackets on the top and bottom on the left side (facing inward into the safe) that you can adjust. I didn’t know this. You unscrew them and slide them slightly forward. My door wiggled but not nearly as much now. Think I’m good
There doesn’t appear to be anything wrong with the one I got. I called Winchester and sent them a video and they said some play/wiggle when the door is locked in fine as the fire seal expands. I’ve seen other videos where people have play in theirs too. Did you adjust anything inside the door?
@@NevilleTheWizard No sir. Not a thing. Seems strange it would be that wonky.
@@DadsGarageDIY There’s no physical damage to mine. I got it adjusted with the tabs inside. It’s pretty close to right now. You don’t want them super tight otherwise it’ll lock up and not open. How do you feel this safe would hold up in a pry test?
@@NevilleTheWizard That is great to hear! Thanks Matthew.
Wahoo!
Thanks for the comment Faraq.
Definitely not a safe, a sheet metal box with a lock.
If you are interested purchase an older used safe.
FYI the fire rating is questionable. I, believe there's only a few safes that actually have a certified fire rating.
FYI, I'm not being critical of your purchase. It's the company's that falsely advertise these sheet metal boxes. That key override is another weakness.... I'm not going to get into that on a public forum for obvious reasons.
My cousin is a certified locksmith....... He actually spoke about the weakness with those locks
If you are interested replace that lock with a Big Red safe lock. Bolt down this container and conceal it if possible.
Those bolts and locking bars are visible if you remove the interior board. Once you honestly examine the constitution you'll be able to understand my comments.
I'm definitely not criticizing you by any fashion. Thank you for sharing your video.. God bless 🙏
No problem. I love hearing all sides and thoughts. That’s what this RUclips channel is about. Love it and appreciate the comments. Hope you subscribe and we have more conversations. God bless you too!
Go to RUclips breaking into Winchester safe. Although it's not the same model,it's likely the same type of construction .
any safe can be defeated given proper tools and time, I know i used to build safes
@@zeme0556 I’ve heard this several times now. Very disappointing.
Does anyone know what the Allen wrench is for?
I found a manual online that shows it. It's a different safe. But, this must be what it is for. Here is the link. Look at page 8. winchestersafes.com/wp-content/uploads/2021/07/2010-Winchester-Safe-Manual.pdf
@@DadsGarageDIY I would says that's it. Thank you. Just got my safe unboxed and loaded up today.
@@jeremiahdunaway3002 Fantastic Jeremiah. Glad to hear. I appreciate your comments. Please subscribe if you have not already. Thank you!
Mine came with one also. There is a small plate on opening of sage where the top and bottom lock bolts hit the safe and there are two sets of Allen screws that line up with those locking bolts and the plate can unscrew. I think it’s meant to be bent to where the door has 0 play back and forth when shut and locked.
@@nicksundin4782 Interesting. Thanks for the info Nick.
Does this come with a bolt down kit?
Yes Michael it does.
No need to unbox it the keyboard is a bunch of crap that's the exact same one I have it weighs 363 lbs empty keyboard has worked for about a third of the time now it won't even reset wish I had not bought it
Dang Mike. That stinks. This one has been flawless.
Change the code with the door OPEN!
Hi Otis. Please explain. Thank you sir.
When you change the door code on your safe keep the door open if something goes wrong your door isn't locked with all your possessions inside.
@@otisboss2887 Got ya. That makes a lot of sense. This one does have an override key so if that happened or if the control pad went bad or something you could still get in it. But, I agree very much with what you are saying. Thank you Otis. Much appreciated sir.
This safe has a dangerous vulnerability and should not be purchased. Can be opened in seconds without a key or the pin combination. Avoid!
Interesting perspective. Can you provide more information?
@@DadsGarageDIY The TS26-45 has the exact same interior as a TS12-30. Here is a walkthru on the vulnerability ruclips.net/video/FyObFaxn8v8/видео.html
@@DadsGarageDIY Check out ruclips.net/video/FyObFaxn8v8/видео.html
@@locksandpicks9552 Thank you sir.
These types of sheet metal safes keep the honest man honest but any of these types that are just glorified sheet metal with some 1+" locking bars can be gotten into in a few minutes by anyone with the where with-all. These types of safes are what they are and work great for the price. If you need more security step up to the models with steel doors and construction.
Any idea what weight of door is?
I have no idea. I can only guess that is is probably 50-60 pounds. Strictly a guess.