Kim, I called the GE for the complaint and then BBB if they don't make this monster machine right, I"M going viral they are going to send me a seventy dollars for the laundromat till its resolved,
I bought a similar GE seven years ago along with the matching dryer. Yes the washer is loud and makes weird noises but after seven years it still works perfectly and my clothes always come out clean. Dryer is also loud but still works great.
@@KimTownsel i figuered it out. it seems the machine can see. i fixed the settings and it eventually filled. Yes it washes with less water. Actually i like it. my last machine lasted me 30 years but was a westinghouse. Lets see if this can match that. Take care Kim.
I bought one also and really dont like how it fills and washes it is quieter than an older one i had but hate that the water doesn't fill up. And gets off balance so much
I'm sorry if this comes off as rude to anyone here, I purchased a GE GTW465ASNWW in this family that sounds exactly the same... What machines are you guys coming from that find this *sooooooooo* loud? Do you sit near your washing machines the entire time they're running? I just truly don't understand, as far as a top loader goes this was on par with the noise of the Maytag commercial we also considered, it isn't much louder than the front loading Samsung it replaced. We have a house that isn't great in terms of sound deadening yet with the door to our laundry room closed you'd be hard pressed to hear it. Aside from that... Your issues around 5:15 are purely due to not reading the manual/taking the time to understand how this machines operation differs from your previous. To explain the reasoning behind some of what you're complaining about (which is explained in the manual). This machine *will not* start a cycle until the lid is closed, if you start a cycle allow the machine to fill, and then don't return within 10-15 minutes the machine will drain the water and you'll need to restart the cycle. Pressing the start/pause button doesn't turn the machine on, opening or closing the lid, changing one of the selector knobs, or pressing the deep fill (deep rinse in the case of your model) button however will. Later with your "no lights are on comment" the machine runs a quick test to make sure both hot and cold water lines are connected (the two quick bursts of fill water you hear immediately after pressing start) then after that (about three-five seconds) the fill light will illuminate as yours did. Unless your're incredibly impatient I fail to see the issue. Nothing against you, but I dislike seeing people complain about products when a bit of patience and manual reading to understand the product can correct most if not all the issues.
I’m watching this as the same one is in the background in the laundry room making the same sounds . I thought it was broken at first. But it works just fine . I like it
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
You're 100% correct. GE should be ashamed to sell this product but they obviously are not because 3 years later the product hasn't improved one bit. Truly amazing that something like this could go through an entire design and QA process and this is what they have as a finished product? I just bought the same machine under the Hotpoint badge. Same piece of junk. My laundry area is on the second floor and you can hear the dying animal noise all over the house which is a total non-starter. And it just doesn't clean well, which is the whole point of a washing machine. I'm sending it back and replacing it with a Maytag commercial washer.
I’ve had mine for two years and works just fine, mind you it gets used twice as much simply because it’s two families living at this address. If anything it gets a break like once a week, we’ve had no issues whatsoever.
Hi Kim, I bought the 2019 version of your washer and the matching dryer; it was delivered about two weeks ago. My Samsung dryer drum “only seven years old” split. I decided to replace both the washer and dryer-the Samsung set put me back nearly $2,000.00 USD., in 2013. I must say I am very impressed with this GE washer; it cleans far better than my high-end Samsung and the matching dryer dries in half the time. It used to take an entire day to do all of my clothes and bedding, now it’s complete in an afternoon-and the items come much cleaner. In truth, the machine is a little louder, but it doesn’t bother me. I have a four-foot-long velvet finish pillow, the Samsung could never get clean, now it is shining like brand new. I must say it’s been over a decade since I have had an agitator, and I love it. In your video, you questioned where the detergent went; I have wondered the same thing too. Occasionally, my detergent vanishes. I think it runs under the agitator. I enjoyed watching your review, and I am sorry your machine doesn’t live up to your expectations. p.s. I find that pushing the start/pause button works to pause without needing to hold it for any period of time.
I own this machine as well and it’s actually pretty good at cleaning clothes. Regarding detergent, I’ve noticed that (at least for me) rarely does it end up below the agitator. Found this out when I pulled out the softener dispenser and looked inside the agitator. 90% of the time we use powder detergent so maybe that’s why it doesn’t go below the agitator. Ever since I found that out, I let the washer fill up a bit before adding detergent.
Thank you for this honest review. Just got mine Saturday and it sounds just like yours! I thought something was wrong with the agitator. I walked back and forth just to check on it. I don’t have time to babysit a washer machine. I wish I had watched your review first! The dryer is ok so far. My only problem with the dryer is that it has a buzzing noise that sounds off when they’re almost dry. Thanks again ❤️
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
I just bought one and I thought Something was wrong it but I see that's just how it sounds. I just want my clothes clean on the first wash and it does a great job.
Things that make noise are usually doing it's job. REally not an issue unless you are running loads ALL day and night. People are just looking for things to complain about....it's a friggin washing machine, after I shut the door I can barely hear it....and only lasts for about 45 minutes. My AC makes noise, so does the tv, dishwasher, kids, dog and people working in the street, Oh dear the world is a LOUD place.
The manuals seem to warn people of the noise now. I just got a similar model a few days ago, and when I read the manual, that was one of the things I saw.
I am not sure. Check other viewers comments on this video and the video of the first one of these models I purchased. Many people gave advice, some good; some bad. Some folks just don't know how to wash clothes, either. LOL.
I have a washer similar. Its works. My smelly clothes came out just as fresh and clean as with my old worn out machine would do. I have no complaints about it. Less water
Hello! So Lowes just delivered my GE gtw335asn2ww….I was on phone with GE support immediately as I have never heard a washer make this noise!! The rep said it’s normal for the agitator to sound like this!! So I feel a lil better after watching vids, I guess. But Ugghh, the noise!!! I wanted a washer most similar to my old one, but I’m just not sure about this one!
I have a GE washer and dryer. I agree its noisy. My question is the rinse cycle. Its does not fill up to remove the soap. Is it suppose. What I get is spraying while it spins and drains. I can't believe that it removes the soap on clothes. I've had 2 companies come the first said it doesn't have a rinse cycle but didn't know how to fix it. The next one said don't put too much soap only 2 tablespoon of soap per load. I can't believe that's would take care of problem.
I think I have a newer model than this one same brand and his has 2 more extra nobs but anyway I just received it today and did the first load and it’s been washing for an hour already.. so I’m not sure if that’s normal and it’s really loud I’m not sure if it fills at the right amount cause the lid locks on me all the time
I’m with you, the old whirlpool/Kenmore units were pretty good and easy to work on. I’m a handyman and I do work on a lot of things. Here’s my advice- Washing machines and dryers are something you’re going to need all of your life unless you plan to do them I elected on my next purchase to buy laundry mat grade washer, and dryer Or even buy a used laundry mat washer and dryer they are quicker. They work well and they are bulletproof. Here is my past story I had always had Kenmore Whirlpool washers and dryers the old-fashioned style and they were always reliable and easy to work on The residential line of front loaders came out. I bought a pair of LG. They were absolutely wonderful they had a 10 year warranty and they lasted 10 years. They didn’t use very much electricity or water and they did a decent job and were relatively quiet At 10 years, I begin to have problems with the dryer in the washer so after trying to fix them and them not lasting much longer plus they were hard to work on a set So this time I bought Samsung front loader residential line, the washer is about the same same as the LG as far as the way it works and operates however, the dryer after it’s done the clothes continues to run and operate with all the lights off, I was told it’s a defective relay in the board and they want $300 to replace this at expense still under warranty If you’re buying residential, Bosch is the way to go ! But I would all always go commercial laundromat quality
Here is the first video with footage of the manual from the first washer; the one shown in this video is exactly the same model. ruclips.net/video/t_aLzQmAo0E/видео.html
Girl I feel u, right now I'm going through the same thing. This is the noisest washer I've ever seen . I HATE this machine and I've had three different repair men come and check it out. You have to put ur water on bulk to have enough water to wash ur clothes, a hand full of water do not clean ur clothes. And I'm stuck with it. Please people Don't buy this GE washer. The man that came out yesterday heard it was Loud so he thought I needed a HUB and left and said they would call me when the part came in. He came right and said this machine doesn't have a HUB, so he look under it and said their was a lose nut on the transmission shaft. Still loud. I'm pissed my first time buying a new washer and dryer. Mind u I got it February of this year and have two more payments on it.🤬
What did you end up doing, did you keep it? We just got one installed today, and it started making that awful cranking noise, so I came here to see if there were any videos on it. I’m wondering if I should just call tomorrow to have Lowe’s take it back :(.
This was the replacement and I can't tell it is any better. I still have this piece of #$% and it tangles at least one load of laundry each week. I recently posted an updated video. Check the reader comments under this video and the first video I made on the first one; we are not alone in our disappointment. Other viewers also provide advice on what to look for in my next washer. I am paying for other repairs but when I complete them, I will buy another washer but not a G.E.
Oh I just bought the same model! I have 10 days to return it if I am not satisfied. I am in the third day and I think it is too loud in the washing cicle. So I think I am going to take it back to Walmart. But honestly, I do not know what washer to buy! Please help 😊
Speed Queen is the highest rated but also one of the most expensive. I think they come with a 10 yr warranty but I don't want to spend $1400 for washing machine that I will likely leave in my condo when I sell it.
Kim, I am a professional appliance repairman for over 26 years --YES!! you are correct utter TRASH! These newer models (most of them) are utter China parts made disasters! Give me the old great 2000-2007 Whirlpool or Kenmore washers over this anyday.
@@kimdecovich1198 There are two basic kinda "old style" washer that seem ok. Amana and Roper. They both are on lower end price and have the agitators inside. Although they still have the standard computer crap, they seem alot better in simplicity and repair friendly. Both can be usually purchased at Home depot or Lowes.
Mine goes out of balance all the time. Any suggestions? Today, sounds like the tub is banging against the walls of the tub and it moved so far that I could not get into the utility room. Any Suggestions?
None, sorry. Mine gets off balance even when I always equally distribute the load. Sometimes the items end up on one side of the tub and are dripping wet. This machine is capricious.
What it does it when you have the lid up and you don’t shut it quickly after it fills up what it does is it drains itself. It’s terrible I can’t tell you how many times I forgot and it will drain for no reason
@@KimTownsel Thanks. I found a new one with a dent for almost half price! TC-5. Since you were so generous to share your experience, I am happy to reciprocate and share a bunch of tips I just heard directly from SQ. They welcome us to CALL them with the serial number on any machine you want to buy (e.g., used or scratch/dent.) They will quickly confirm the history over the phone e.g., when it was made and how much warranty is left. The one I am considering was made this year- still has a full 5 years warranty left or 4.5- not sure when the warranty kicks in but probably when I register it or buy it. Downsides of the TC-5. The load size is smaller and it will be louder- 62dB's vs. 42dB's on the TR series (do not get TR). We are on a 2nd floor (condo) but we need a quality top loader (less smelly.) I do not want to deal with what you went through so I want to get this one- or a new one in the box if this one does not work out. The SQ has a quality porcelain coated, metal outer tub (collects spin water.) Almost all washers I found including the Maytag Commercial us a cheap plastic tub that grows mold easier. It is also why this SQ is a tank and weighs nearly 200lbs. It does have a Prop65 warning I am not super happy about but I think it will be ok- they said it's inside some wiring that we will never come in contact with anyway. Let's hope so! SQ also said to use White Vinegar (add inside the top of agitator) to soften cloths- not fabric softener (gets sticky and contributes to future mold- the issue we are having now big time on our front loader despite cleaning all we can.) Vinegar also really helps to keep the machine clean. She said less is more- regarding soap and vinegar. Also, if you are coming from a HE machine, run the first wash of any cloths with NO soap. The machine will extract out of your cloths what was not extracted with the HE machine. This is why new customers complain their SQ machines are foaming over the water outlet with soap. They add too much soap and plus their cloths still have soap stuck inside the cloths. All great tips! Now, the only hassle is getting it delivered here and lugging it up stairs. They are over an hour away and want $200. I would rather not go get it but will if needed. Saving nearly $500 on a new machine that has never even been plugged in!
@@KimTownsel Thanks. Have since read some have a suds issue at the drain! I guess no washer is perfect. I think there are some hacks for it but having soap bubble out and onto the floor on a $1200 machine is not great. I think someone said the pump is too strong so it stirs up bubbles.
Hello, do you still have this washer? I’m worried about the noise because our washer and dryer outlets are in the kitchen which is pretty much attached to the living room.
@@KimTownsel okay that’s what I’m worried about. I wanted a washer that we could choose the water level but not at the expense of all the racket. We heard of a front loader that uses microban technology to prevent mold and have a vent system. We are looking at that right now.
This washer washes clothes for 40 mins, is there a short wash cycle? That is just washing cycle only, that's not counting the spin cycles or the rinse cycle. Which selection would be a short cycle?
I just bought the GE #GTW325ASWWW and so far I'm not so satisfied either...I agree with ya about the agitation noise...mine makes the same...not like my 26 year old GE Profile which I finally had to get rid of. I surely miss that one. So, when the guys installed it, they didn't know which hose to hook up to my Hot and Cold...since the faucets are both Black in color. They asked me and I told them I didn't know....well, stupid me, I tried a Warm wash instead of a cold wash. Everything seemed ok and I tipped them $20 and let them go. So, a day or two later, I did a Cold wash and Hot water came out. Ugh! They hooked up the hoses wrong! So, I'm waiting about 5-6 days for them to come back out and switch them. They were supposed to come earlier, but here in Memphis, we had a real bad snowstorm. So, they postponed it for 4 days. Hopefully, they'll fix it and also, the Final Spin kept going over 20 mins. and I know its not supposed to be that long. I had to stop it. Oy Vey! Too late to take it back to Home Depot. This is insane! By the way, Hot water comes out instead of Cold Water for the Rinse cycle since the hoses are mixed up. Maybe that's why the Final Spin was taking so long. I don't know.
I'm also looking for a descent working washer, I've not found anything other than those commercial grade washer , and those todays commercial grade are probably not as good as those very common washers from the 70s. Very soon people will have to start washing by hands, back to square one.
Hey the back bottom left side of my washer has a cap that’s missing on it it’s the same one as yours. I just moved I guess the cap fell off when movers moved it, could you tell me if you see what I mean on yours? I think it’s an agitator cap? Not sure, it pours out water since the cap isnt on 😭 so aggravating please help me!!
My wife bought one just like this Saturday. I liked my old one and I think I could have fixed it. But the paper sticker with the ser. and mod. numbers had faded / washed away. And your SOL if you do not have them. Not impressed with this thing. Hope you were able to get yours fixed or find one that you like.
Any machine listed as a HE for high efficiency is going to give you very little water. More nonsense in the name of climate change.. Just had extra water from a bucket once it stops filling.
Here is the long and short of it. There is only 1 Top loading washer that still works as it should and is not flimsy junk. That is the Speed Queen TC-5003. You will have to find a local dealer as they are not available in big box stores. A friend of mine had this washer. Hated it, Bought a Speed Queen and never looked back. The SQ is 100x better in quality and performance.
I bought this model 6 months ago . So far the machine does a fine job . The spin cycle spin so fast I thought it was going to hover like a ufo . Clothes come out so dry they hardly need to be put in the dryer. Kim I hope this helps you , after you set the washer push strart and leave it alone . If you just wait it will do its thing . Pushing buttons prematurely will confuse the electronics. Please let know if this works for ya 💕♥️😱
You are so right about the spin cycle. It is fast, loud, and thorough. You are also correct about pushing the start button and just leaving it alone. Thank you so much for leaving us a helpful comment.
EXACTLY....people need to learn to WAIT. I have a part time cleaning business, we do a lot of Air B&B's and corporate condo cleanings, somehow the owners and clients are always calling us about the washing machines....usually inpatient, middle age to older white women in a frenzy asking why the machine is not working, 9/10 times it's because they start hitting buttons or trying to change cycles thus causing the sensors to start timing in and turning off the interface for a minute while it starts to program. . I tell them to "hit the start button once...and WAIT 5 minutes". Almost ALWAYS it goes back on starting whatever cycle is programmed.
I have one of these and I'm not impressed, even the highest setting of the water doesn't cover the clothes. What good is that? I have 5 gallon water containers that I put into the top washer to get the clothes covered. Again, not impressed.
Mine is doing the same thing an I don't know what to do a sorry piece of crap work after I leave it unplugged for hours an then after a load of clothes it quits
My neighbor just bought a GE washer and she misses her Kenmore 90 series it was similar to your dryer it starting leaking and I was going to fix it for her but I was out of town at the time, I told her to wait for me to come back but she didn’t want to
Omg!! I have this same noise machine and last night I had a load soaking over night everything was off and at 4 in the morning it starting rinsing by it self I got up and there was no lights on dashboard ..I had to unplug it to stop..this is second time this happened last time water was filling..Im leaving it unplugged..anyone else having same issues???? Scary!!
Whirlpool washer is the best... My whirlpool just went bad, it was 15 years old... Now I have the one your reviewing... My new washer is quite to compare with the old one...
She’s spot on right. My second one just shot craps after 3 years. The previous one lasted only 3 years as well. Both purchased new from Home Depot. It’s off to Lowe’s later today. I’ll be getting something else.
@@KimTownsel I received my Maytag washer yesterday. Manufactured by Whirlpool. Ran two loads through it. I barely knew it was running as its so quiet. The delivery men said the G.E.s are junk, and that this Maytag will be more durable with normal use. I also received a new flat top Samsung self-cleaning oven. I had identical problems with the G.E. matching dryers. Blew through two of them in six years. Two years ago I purchase an Amana dryer, also manufactured by Whirlpool. Seems to be holding up under normal use as well. Lowe’s has good pricing on major appliances, but I’ve found their customer service to be not so good.
@@tubalcain6874 Thank you so much for the updates. In the past, I have had such good experiences with GE but based on these last two GE washers, as well as the high number of other viewers on my GE washing machines, I will not be buying another GE appliance.
Lol my old washer broke down I bought this one same problems. I foolishly thought all you had to do was plug it in. This is shocking please tell me you got used to it.
Falls off ? I can't get mine off. It has a big I believe 7/16 socket size head. Remove the plastic fabric softener cup that sits in top of the agitator, and you can see it at the bottom.
I had a 20 year old washing and drying machines. I had to replace both. The washer for some reason was not washing the clothes like it used to and the dryer was burning the clothes. The laundry room has limited space so my husband and I went to Lowe's and purchased a GE model GTW465ASNWW washing machine along with a dryer GE model GTD42EASJWW. I don't mind the noise.You can't hear it when the door is closed. Thank goodness for that, my husband works at night and sleeps during the day. I only 2 issues… 1. It has five knobs, none of which do what I want (LOL). I want is to skip to the rinse cycle. Not possible 2. For some reason I cannot for the life of me figure out why I can’t smell the fabric softener or the lovely smelling Downy Unstoppables after the wash is done. My clothes seem to come out smelling like that new washing machine smell. Yuck! I wish they made washing machines the way they use to. I miss my old machine when it worked well. By the way the dryer is awesome.
i honestly love this machine. i always keep it on precise fill so i know there will be enough water. but is there a cleaning cycle? i just wanna use the tablets to deep clean it. anyone have any tips?
A washing machine should be self-cleaning. Take your advice and put it on precise fill, add detergent, and start. Oh, snap. That won't add any water, right?
Always close the lid before you start the cycle. The first two sprays of water are normal. Once the Fill light turns on, you Can leave the lid up until the wash starts.
Thanks for the info,weird looking agitator and this washer is louder than a pinball machine.The buyer should be allowed to hear the machine cycle @ the store before buying and trying @ home .
Agreed. When I got home with it, then instruction booklet had a QR code where the buyer could listen to what the normal washing cycle stand a lot. However, by then it was too late to be helpful for comparison shopping because the consumer had already purchased the product.
It would also be nice if the person that sold you the washing machine had knowledge about it so when you went back to ask questions they could help. Definitely not a fan of this washing machine.
I just bought the washer and dryer and I just used it for the 1st time (the knobs have extra cycles now) It is a bit on the louder side but my water was filthy so I know it cleaned the heck out of my clothes (and that's what matters to me) and it's in the basement so I don't care.
By the way I noticed that you don’t put the deep rinse on, do you realize that it only gives you a spray rinse without the Deep Rinse light on? I definitely would use the deep rinse.
Kim Townsel I’m glad you read the comments, some people don’t. Most older machines automatically gave you a full deep rinse but now that they’re so cheap with the water you have to actually tell it, I want to deep rinse. Lol enjoy. 👍
in March 2011 , an article titled "How Washington Ruined Your Washing Machine" was posted in the Wall Street Journal. You can find that article online. Just do a search and read it. Basically , the EPA has an obsession with energy and water efficiency. Since 1996, the EPA has continually increased energy and water efficiency standards for appliances and manufacturers have to meet those standards. The result : Every appliance you shop for in America is designed primarily to use less energy and less water , even if that means compromising performance.
@@hellraiserharry 😭😭😭 I washed sheets and my bedspread today in separate loads with no off- balancing or drain failures. I was surprised. I still have two loads of clothes and one load of towels to wash. Pretty sure something will go wrong. Last week it DESTROYED one of my slips and tangled all of my pants.
I just got this today... different model # but looks the same... and I cant hear it..I had one with no agitator and I hated it and it sounded like it was a airplane taking off all the time. And my clothes never came out clean.
we've had this same one for about 6 or 7 years now its only now giving us problems, "wont actually spin" but from my experience it's the user error and not knowing or trying to learn how to work the product for most people that causes these errors.
@Kim Townsel My parents just bought this GE washer model and were wondering how come the "Soak" cycle light doesn't come on unless you choose "Delicate" and even if we were to select this "Delicate" wash option, this GE washer model just "quickly skips over" the Soak cycle of the washing process. Does yours or anyone watching this who owns this GE washer model also experience the same aforementioned "Soak" cycle issue?
Greetings! Not sure. I have already completed all of my laundry for the week but will try to pay attention next weekend. This is a strange model washer, for sure.
@@KimTownsel Just to add, you will also notice that the "Soak" cycle indicator light does NOT light up upon opening this GE washer model's lid (as you would assume it will along with all the other cycle indicator light). Also, if you were turn the knob to select any other wash programs (except Delicate), the Soak cycle will be quickly skipped over as well. Let us know. Thanks!
@@AndyKYu I have noticed that if I make any change after initiating a wash cycle, the washer becomes very confused and takes a long time to adjust... sometimes it doesn't. :( I honestly do not recall the soak light ever coming on.
@@KimTownsel, you are correct about the Soak cycle indicator light doesn't come on ever (on my parents' GE washer model (same as yours featured in this RUclips video), it only comes on solid green when I turn the knob to "Delicate" washing program before I push the "Play/Pause" button. Furthermore, I observe that this GE washer model behaves in such a way that regardless of whichever washing program you select with the knob and press the 'Play/Pause' button afterward to start the washing process, it will go through the Fill, , goes straight to the Wash, Rinse, and Spin cycles. May you check and report back or post a new RUclips video of your GE washer model going through the wash process to see if it also just "skips" the Soak cycle after the Fill cycle and go directly to the "Wash" cycle by having your video camera focused on the cycle indicator lights throughout the washing process recording? This way, we can verify and conclude that the auto skipping of the Soak cycle is just simply how this GE washer model functions (a defect in my opinion as I believe a Soak cycle should be at least for 1-2 minutes). I'm going to also check on Google and contact GE Technical Support to learn more about this "Soak" cycle skipping and "Soak" indicator light not turning on ever (except when you turn the knob to "Delicate" wash program) issues for this particular GE washer model [GTW330ASK4WW]. Thanks!
It will begin to start walking forward within 3 years of ownership, after this model and 2 other cheap brands I did the research and saw a lot of comments saying the Commercial/Residential line of Maytag (about a $1000 US) beware of the cheaper digital model, the Commercial one is from the same line as the laundry place without the extra cost of the coin box, very solid,... So far so good, easy analog dials with extra rinse and presoak options,, almost old-school but strong motor and belt and gives you a true half and full tub of water instead of the High Efficiency models Congress passed a law some years ago restricting how much water went into the wash, usually the top stuff felt dry still, the one you reviewed here failed us badly as with several brands before, so the Commercial Maytag model is coming out on top even over those front loading GE etc models at twice the cost at least.
So I disagree about the Commercial Maytag. I have had the same problems this lady is having . Within 6 months, they had to replace the tub and motor. Now, the sensor is out. Always noisy! Im replacing mine. Tired of dealing with it. Bottom line, everything but speed queen is a piece of junk. I cant afford, unfortunately.
Mmine washer is almost identical to yours, my model number is a GTW330 Wask3ww. My washer is also noisey, alot. When it's about to spin it goes out of whack, u balance?, plus it's tearing everyone's clothes. 👖👚👗👙🩳🩲👕👔It not in my budget to replace at the moment. But I do wash it tub all in then I start a cycle by it's self. Still sick washer. 🤯😠🙏
Being a new owner of a new high-efficiency belt drive washer like yours (a model GTW465) I half to say that most of the problems you are experiencing are due to your own error and lack of knowledge when using this washing machine. You seem to believe that this washer will work similarly to your old Kenmore direct drive however, it does not at all. The first piece of advice I must give to you is to always leave the load size selector knob on large or super. Any other lower water level will not cause sufficient rollover in your clothes during the wash cycle with medium or large-sized loads. Also, I recommend that you leave the deep rinse on for every cycle. It will cause the machine to fill and agitate during the rinse cycle like your previous Kenmore and will help to get stains out better. You can activate the deep rinse feature by pushing the deep rinse button on the left side of the cycle LEDs. The machine should remember that you have selected it for future washes with the particular cycle you activated it on, but you can make sure by checking to see if the light for it is on each time. The issue of you leaving the washer after initially starting it and coming back to it with an empty tup is proper functionality. If you leave this washer, or any other high-efficiency washer with water in the tub for more than 15 minutes while the cycle is paused, the washer will cancel the cycle and drain the water. Also, if you turn on the washing machine, leave the lid open, and walk away, then as soon as the cycle starts when the washer finished filling, the washer will immediately pause, and the auto water drain countdown will begin. In addition, the issue of you returning and not being able to cancel the cycle at 5:14 is not really an issue, but moreover how these washers are designed. You were unable to cancel the cycle due to how as I previously mentioned, when the washing machine drained the water, the cycle was also canceled. If this happens in the future, where you return to the machine having drained all the water with the drain pump still running, then turn the cycle selector knob until the LEDs light up. The reason why you can't do anything when the lights are off is because the control panel has gone into sleep mode, and you must input a command with any of the knobs to wake up the control panel to use the start button. At 7:36 this is exactly what I am talking about. You are attempting to use the washer when the control panel is in sleep mode, so the start button was not working. You then open and close the lid, which wakes up the control panel (the LEDs being on indicates it is ready for you to press start), you push start, and it works. You need to make sure that before every cycle the LEDs are on so you can push the start button. Another key point is that I recommend you modify the way you insert clothes and detergent into the washer. You should start putting in your clothes and detergent, even before you start the washing machine and then close the lid before you start it. You should also try to leave the lid closed for the entire cycle. This will eliminate the issue of the washer auto draining the water because you forgot to close the lid and walked away for over 15 minutes. What you hear at 10:07 is the "slow speed" agitation. On some cycles for the last 5 minutes of the wash, the washer enters slow speed agitation before it drains and spins. The reason why the washer does pulses of agitation is that it has no real low-speed setting, so it just pulses the high-speed setting. Practically no new washers have a slow-speed setting built in the motor for agitation anymore. The last and final point I would like to make is about the spin cycle with bulky items and how the washer may seem to go out of balance when it initially starts spinning. If you happen to hear the washing machine come out of balance when it is spinning, here is what you should immediately do. As soon as you hear the tub start hitting the walls of the washer cabinet start counting to 10. If the washer stops banging before you get to 10 and is still spinning, then let it spin however, if the washer continues to bang for more than 10 seconds or stops itself, then you will need to redistribute the load manually. You will also need to redistribute it manually if the spin light is blinking and the washer is just sitting there. This may happen twice during a spin cycle, once when the washer initially starts spinning and again when it goes to ramp up to full speed. Here is an example of one of the washers initially going out of balance, but was able to correct itself in under 10 seconds: ruclips.net/video/LjPV6Me0OZk/видео.html
Thank you for your honesty, I feel like you. I hate this machine and it wasn't cheap were I live, I have issues you did not address. Just know it's not you this is not a good washer, I feel we all should be given a refund. .
What is the model number of your washer and what were the issues you were experiencing with your machine? I personally understand what you are talking about. This washer could be made so much better and easier to use with minor design tweaks on the same platform, but as far as I am concerned all new washing machines are like this. If your not looking to get your washer from a tech company and can't find a Speed Queen or used washer your options are pretty much a Whirlpool VMW washer, or a Ge.
Yes, to all this… I was thinking all this while watching. After reading instructions and washing a load or two mine still works just fine and always has. Idk what people expect with a low middle price range.
I have the same one exactly same noises etc. I had a whirlpool for 20 years and I also returned 2 of these stating the were defective. It is the (New Top Loader they said)! My current issue is mold growing inside the agitator under fabric softener cup. It says not to put anything in this hollow cavity but it's black mold and its getting on clothes when washing. Hmm? It smells horrendous and the whole laundry room smells like mold. I checked out your video to see if this was your issue. It was not. Mine is 2 years old now. Have been unhappy since the 3rd one was delivered. Also I always push Deep water button first you get double the amount of water just FYI. If anyone can look under the fabric softener cup and tell me if its also moldy I could certainly use the advice. Thanks
Omg! It's supposed to sound that way? I thought mine I just had delivered this morning was broken. I can't imagine it being able to clean anything with such pitiful washer movement
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
I bought the one with no agitator, just the open tub. We put the dry detergent on top after loading. It went through the full wash cycle, opened up the lid and the soap was still ontop. Still dry! Just like you, we ended up with this machine, if we don't start the water add soap, and stir, we get soap residue on the bottom clothes. Forget washing large sheets, comforters, and blankets.
@@KimTownsel It's not you, we've went through at least 10 different washers. Exchanging them, returning buying different models. All from Lowes. Another dirty lil secret, every washer we returned, exchanged, was placed back out on the floor with a 10% markdown, and sold as scratch n dent...
I have same model, but ends in 2WW, everything else identical. This machine is a complicated mess, the clothes at times comes out with small dry areas that look like never made contact with water. Not to mention..there’s a trouble shooting code sheet taped under inside side panel with which to help one determine what’s causing issues that will arise, in our case it stopped spinning, because the lid lock broke…again a RUclips clip saved the day. Agree with you…wouldnt recommend to worst enemy. Used to love our old GE washer from the 90s. The last 2 only got worse. Don’t slam that lid.
thank you so much for posting! saved me the money :). I bought an LG top loader with no agitator a few years ago and was so unhappy...clothes come out dirty still. Looking for something better but not super expensive.
This the way my Maytag bravos sounded. I have recently purchased this and have no issues. It’s belt driven. You need the direct drive they are quieter I think you will like it better
They all sound like this unless you splurge for the $700 plus machines. You are correct about the belt driven machines. I do know that direct drive is more sturdy and expensive, but belt driven ones can be easily fixed for cheaper, thus overall can last longer if you are willing to repair it if that goes out. Anyway, you get what you pay for, all machines now are built to last 3-5 years....and unless you pay about $300 more, you get a little more noise. I just bought a GW 4.5 Cu ft, it's probably louder than this one, but who cares! it makes about the same noise as my dishwasher in my kitchen. Two loads a week comes out to about two hours where I have to deal with this noise. Seriously not an issue to me.
I have this same machine at home too. It's soooo awful. It takes 20 mins just to slowly fill the Machine. It doesn't use enough water. I've had clothes come out overloaded with soap and others smelling sweaty. I've had to re wash clothes and they still don't get cleaned. It takes almost 2 hours to run a load, Which is way too long. It backs up the laundry so bad. I've gotten so frustrated that I went to the laundromat.
Kim you are looking at in contrast to old school washers. These new machines have been tried and tested. They save water. You dont have to soak clothes with mega gallons in order the wash them good. You saturate them and let them move and the filth is loosened up. The rinse cycle does get them really wet to wash out the filth but to saturate the load in lower levels of water is a cheaper way to get them clean like Great Grand Ma used too. Sure lots of water cleanses but its not needed.
I understand about the less water but the machine has other features that are subpar. It is too noisy, it takes too long to wash, the technological features don't allow changes for the cycle, and it gets stuck on a cycle and will not let you change your mind. There is more technological progress than merely saving water.
We have the GE GTW220 (ACK5WW) the landlord bought it to replace the GE that went out. I just left it for a few minutes to get some more clothes, came back, the machine decided to empty out all the water and detergent I had put in, so now I lost detergent, looks like GE is in the detergent business as well. The cycles don't make sense, I read the entire instruction manual, it never says what HEAVY, MEDIUM and LIGHT does, the water temperatures are ridiculous, the water that comes out to fill the tub is never what you select, yes, my HOT and COLD water hoses are properly connected, I double checked them. There is no place to put in the fabric softener. Yes, you heard that right, THERE IS NO FABRIC SOFTENER CUP. So you have to stand in front of the machine and wait... and wait.... and wait... GE should just get out of the appliance business, I'm sure Apple or Toyota would make a much better and more logical washing machine. Machine is pretty quiet, but then again, if you're listening for the water sound so you can run back to put in the fabric softener, the quietness isn't helpful. If this was my property I'd return this piece of shit right back to wherever it came from.
Maybe I should state the ONE and only thing I like about this as a washing Machine. It gets my clothes clean when I get it to WORK right. 😂😂😂The sound is weird to me too. My house must be well insulated or I’m going deaf my old age but the volume doesn’t bother me just everything else about it. My old washing machine was 35 years old so it’s been a long time so maybe they’re all like this I don’t know but I agree with you hundred percent I do not like the washing machine. I would not recommend it to anyone. I like to add water and agitate for a little while to mix my detergent then put in my clothes then have it fill the rest of the way. I don’t think that’s a possibility with this washer. Thank you so much for putting out this video.
PS I am old hahaha and I do have a hearing problems but now that you mention it all I heard yesterday was that weird sound coming from my washing machine! I chuckled every time I heard my washing machine. So if it helps you made me smile quite often yesterday. 😂🤣😂
Gosh thank you for this video, I just bought this washing machine. Same thing happened to me, I couldn't stop it for anything in the world! Also, it does NOT NOT NOT add enough water I just don't understand why, what is with these new machines!!!! GE ...HELP!!!!!! I didn't want an HE because NO ONE should be controlled on which type of detergent to use! I still don't understand how to turn it on! I hate that I can't turn the buttons to re-rinse whenever I'd like! It is loud and whenever I'm washing a heavy load, it practically stops and sounds like it is pausing between each churn! I'm so UNHAPPY, because there aren't many choices when it comes to shopping for washing machines.... all the stupid washers say HE....that means I can't use the Mexican detergents I love! I bought this washer because it's not an HE and therefore I can use Ariel or Zote Soap to whiten my socks! I'm glad that the agitator (medium only) works like a normal washing machine and not in slow motion!!!! Honestly I wish GE will come up with a better NONE-HE washing machine than this weird one and let us exchange this weird machine for a good old fashion conventional one!
I remember the Filter-Flo style. I think manufacturers make appliances to last only a short time, forcing us to become a consumer of whatever they are selling. :(
Como puedo programar mi lavadora es esa misma marca y esa numeración pero no tira el suavitel y keda mojada mi ropa y antes no lo asia si saben se los agradecería
Puse el mío para el nivel de agua más alto. Si solo tengo una carga más pequeña, utilizo la configuración ligera o media; de lo contrario, los artículos se enredan más allá de lo imaginable. He aprendido a no seguir presionando botones o cambiando ciclos porque la máquina no puede cambiar así. Es muy lento para comenzar. I set mine for the highest water level. If I have only a smaller load, I use the light or medium setting; otherwise the items are tangled beyond belief. I have learned to not keep pushing buttons or changing cycles because the machine cannot change like that. It is very slow to start.
Hi, ty for doing this video and sharing the way the washer works. I seriously thought my washer was broken and am trying to find a way to make it quieter when washing. I am sorry for the other issues you have with yours though. I think GE should give you a full refund and you should be able to get a diff brand 1 and hopefully that will work better for you. I dont mind the pauses it does for the cycles, I just dont like how loud it is.
Thank you, Lori. From what I have learned from others, this is just how "modern" washers sound and function. Disappointing. Thank you for watching and leaving a positive comment. 😎
I absolutely hate the new washers they are building now. I was able to obtain a new Speed Queen back in 2017 before they made the design change. It has the old-school agitator and wash style. I'm glad I bought it before 2018, because from what I understand, everything after 2018 sucks. The GE Filter Flo washers from the 1960's through the early 1990's were the best! I loved those!!
Kim, I called the GE for the complaint and then BBB if they don't make this monster machine right, I"M going viral they are going to send me a seventy dollars for the laundromat till its resolved,
Good!!! Please keep us updated on this. I support you 100%!
I bought a similar GE seven years ago along with the matching dryer. Yes the washer is loud and makes weird noises but after seven years it still works perfectly and my clothes always come out clean. Dryer is also loud but still works great.
I just go one today but like its washing without water. very little water. the clothes are moist. but not immersed. is this correct?
That seems to be what this machine does. 😳 ☹️
@@KimTownsel i figuered it out. it seems the machine can see. i fixed the settings and it eventually filled. Yes it washes with less water. Actually i like it. my last machine lasted me 30 years but was a westinghouse. Lets see if this can match that. Take care Kim.
Most all the new ones are like that. My mothers Maytag is the same way.
did you check how much water this fill? mine in whatever load size i select the washer fill the same amount of water its that ok??
I keep mine on the highest level. Hardly uses any water at all.
I bought one also and really dont like how it fills and washes it is quieter than an older one i had but hate that the water doesn't fill up. And gets off balance so much
Kim should this machine fill up to rinse or just spray for a bit and thats considered rinse.?
@@monicac7683 Who knows? Mine does NOT fill to rinse.
I'm sorry if this comes off as rude to anyone here, I purchased a GE GTW465ASNWW in this family that sounds exactly the same...
What machines are you guys coming from that find this *sooooooooo* loud? Do you sit near your washing machines the entire time they're running? I just truly don't understand, as far as a top loader goes this was on par with the noise of the Maytag commercial we also considered, it isn't much louder than the front loading Samsung it replaced. We have a house that isn't great in terms of sound deadening yet with the door to our laundry room closed you'd be hard pressed to hear it.
Aside from that...
Your issues around 5:15 are purely due to not reading the manual/taking the time to understand how this machines operation differs from your previous. To explain the reasoning behind some of what you're complaining about (which is explained in the manual). This machine *will not* start a cycle until the lid is closed, if you start a cycle allow the machine to fill, and then don't return within 10-15 minutes the machine will drain the water and you'll need to restart the cycle. Pressing the start/pause button doesn't turn the machine on, opening or closing the lid, changing one of the selector knobs, or pressing the deep fill (deep rinse in the case of your model) button however will. Later with your "no lights are on comment" the machine runs a quick test to make sure both hot and cold water lines are connected (the two quick bursts of fill water you hear immediately after pressing start) then after that (about three-five seconds) the fill light will illuminate as yours did. Unless your're incredibly impatient I fail to see the issue.
Nothing against you, but I dislike seeing people complain about products when a bit of patience and manual reading to understand the product can correct most if not all the issues.
great point
Washing machines are loud machines. All I care about, does it clean my cloths and doesn’t break in 5 years like my top load no agitator washer has!!!
I’m watching this as the same one is in the background in the laundry room making the same sounds . I thought it was broken at first. But it works just fine . I like it
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
You're 100% correct. GE should be ashamed to sell this product but they obviously are not because 3 years later the product hasn't improved one bit. Truly amazing that something like this could go through an entire design and QA process and this is what they have as a finished product? I just bought the same machine under the Hotpoint badge. Same piece of junk. My laundry area is on the second floor and you can hear the dying animal noise all over the house which is a total non-starter. And it just doesn't clean well, which is the whole point of a washing machine. I'm sending it back and replacing it with a Maytag commercial washer.
I’ve had mine for two years and works just fine, mind you it gets used twice as much simply because it’s two families living at this address. If anything it gets a break like once a week, we’ve had no issues whatsoever.
Thank you. Does yours make the same noise at mine does? I'm just wondering if that noise is normal...
@@KimTownselwe just got one (wish we did some research before) and it makes that annoying noise that yours does
Hi Kim,
I bought the 2019 version of your washer and the matching dryer; it was delivered about two weeks ago. My Samsung dryer drum “only seven years old” split. I decided to replace both the washer and dryer-the Samsung set put me back nearly $2,000.00 USD., in 2013. I must say I am very impressed with this GE washer; it cleans far better than my high-end Samsung and the matching dryer dries in half the time. It used to take an entire day to do all of my clothes and bedding, now it’s complete in an afternoon-and the items come much cleaner. In truth, the machine is a little louder, but it doesn’t bother me. I have a four-foot-long velvet finish pillow, the Samsung could never get clean, now it is shining like brand new. I must say it’s been over a decade since I have had an agitator, and I love it. In your video, you questioned where the detergent went; I have wondered the same thing too. Occasionally, my detergent vanishes. I think it runs under the agitator. I enjoyed watching your review, and I am sorry your machine doesn’t live up to your expectations.
p.s.
I find that pushing the start/pause button works to pause without needing to hold it for any period of time.
Thank you!!!
I own this machine as well and it’s actually pretty good at cleaning clothes. Regarding detergent, I’ve noticed that (at least for me) rarely does it end up below the agitator. Found this out when I pulled out the softener dispenser and looked inside the agitator. 90% of the time we use powder detergent so maybe that’s why it doesn’t go below the agitator. Ever since I found that out, I let the washer fill up a bit before adding detergent.
Thank you for this honest review. Just got mine Saturday and it sounds just like yours! I thought something was wrong with the agitator. I walked back and forth just to check on it. I don’t have time to babysit a washer machine. I wish I had watched your review first! The dryer is ok so far. My only problem with the dryer is that it has a buzzing noise that sounds off when they’re almost dry. Thanks again ❤️
Thank you!!! I do not understand why modern appliances have to be so noisy!!!
I love mine it makes a lot of noise but cleans very well and clothes come out almost dry...
I think I am getting used to the noise. It was shocking at first. I could not believe that a washer I bought over a decade ago would be better than one bought in 2018.
I just bought one and I thought Something was wrong it but I see that's just how it sounds. I just want my clothes clean on the first wash and it does a great job.
Things that make noise are usually doing it's job. REally not an issue unless you are running loads ALL day and night. People are just looking for things to complain about....it's a friggin washing machine, after I shut the door I can barely hear it....and only lasts for about 45 minutes. My AC makes noise, so does the tv, dishwasher, kids, dog and people working in the street, Oh dear the world is a LOUD place.
The manuals seem to warn people of the noise now. I just got a similar model a few days ago, and when I read the manual, that was one of the things I saw.
Same, i was surprised that i could actually have a washer with a brand that i could trust
What about LG top load washers are they noisy mine is a little squeaky it’s 8 years old now
I am not sure. Check other viewers comments on this video and the video of the first one of these models I purchased. Many people gave advice, some good; some bad. Some folks just don't know how to wash clothes, either. LOL.
I have a washer similar. Its works. My smelly clothes came out just as fresh and clean as with my old worn out machine would do. I have no complaints about it. Less water
Mine is horrible!
Did you unplug it? sometimes the computer board has to be reset.
Yes, I tried that. Another reason why such technology is not needed for simple appliances.
I had a GE it only lasted for a month you should get the lg top load washer
Hello! So Lowes just delivered my GE gtw335asn2ww….I was on phone with GE support immediately as I have never heard a washer make this noise!! The rep said it’s normal for the agitator to sound like this!! So I feel a lil better after watching vids, I guess. But Ugghh, the noise!!! I wanted a washer most similar to my old one, but I’m just not sure about this one!
I have a GE washer and dryer. I agree its noisy. My question is the rinse cycle. Its does not fill up to remove the soap. Is it suppose. What I get is spraying while it spins and drains. I can't believe that it removes the soap on clothes. I've had 2 companies come the first said it doesn't have a rinse cycle but didn't know how to fix it. The next one said don't put too much soap only 2 tablespoon of soap per load. I can't believe that's would take care of problem.
I think I have a newer model than this one same brand and his has 2 more extra nobs but anyway I just received it today and did the first load and it’s been washing for an hour already.. so I’m not sure if that’s normal and it’s really loud I’m not sure if it fills at the right amount cause the lid locks on me all the time
Sounds about "right" for this family of GE Washers. 😠
I’m with you, the old whirlpool/Kenmore units were pretty good and easy to work on. I’m a handyman and I do work on a lot of things. Here’s my advice-
Washing machines and dryers are something you’re going to need all of your life unless you plan to do them
I elected on my next purchase to buy laundry mat grade washer, and dryer
Or even buy a used laundry mat washer and dryer they are quicker. They work well and they are bulletproof.
Here is my past story
I had always had Kenmore Whirlpool washers and dryers the old-fashioned style and they were always reliable and easy to work on
The residential line of front loaders came out. I bought a pair of LG.
They were absolutely wonderful they had a 10 year warranty and they lasted 10 years. They didn’t use very much electricity or water and they did a decent job and were relatively quiet
At 10 years, I begin to have problems with the dryer in the washer so after trying to fix them and them not lasting much longer plus they were hard to work on a set
So this time I bought Samsung front loader residential line, the washer is about the same same as the LG as far as the way it works and operates however, the dryer after it’s done the clothes continues to run and operate with all the lights off, I was told it’s a defective relay in the board and they want $300 to replace this at expense still under warranty
If you’re buying residential, Bosch is the way to go !
But I would all always go commercial laundromat quality
Oh my. Thanks for sharing I was just getting ready to purchase one. There is no way I would put up with a machine that sounded like that!
Have you read the manual yet?
I made a video of the original machine. Footage in there shows the manual. Did you watch the entire video?
Here is the first video with footage of the manual from the first washer; the one shown in this video is exactly the same model.
ruclips.net/video/t_aLzQmAo0E/видео.html
Girl I feel u, right now I'm going through the same thing. This is the noisest washer I've ever seen . I HATE this machine and I've had three different repair men come and check it out. You have to put ur water on bulk to have enough water to wash ur clothes, a hand full of water do not clean ur clothes. And I'm stuck with it. Please people Don't buy this GE washer. The man that came out yesterday heard it was Loud so he thought I needed a HUB and left and said they would call me when the part came in. He came right and said this machine doesn't have a HUB, so he look under it and said their was a lose nut on the transmission shaft. Still loud. I'm pissed my first time buying a new washer and dryer. Mind u I got it February of this year and have two more payments on it.🤬
What did you end up doing, did you keep it? We just got one installed today, and it started making that awful cranking noise, so I came here to see if there were any videos on it. I’m wondering if I should just call tomorrow to have Lowe’s take it back :(.
This was the replacement and I can't tell it is any better. I still have this piece of #$% and it tangles at least one load of laundry each week. I recently posted an updated video. Check the reader comments under this video and the first video I made on the first one; we are not alone in our disappointment. Other viewers also provide advice on what to look for in my next washer. I am paying for other repairs but when I complete them, I will buy another washer but not a G.E.
@@KimTownsel
Uggh, that’s terrible. Sorry to hear that. We just got this today, so I’ll call tomorrow to see about sending it back.
Oh I just bought the same model! I have 10 days to return it if I am not satisfied. I am in the third day and I think it is too loud in the washing cicle. So I think I am going to take it back to Walmart. But honestly, I do not know what washer to buy! Please help 😊
I don't know what to buy either! It's why I still have this stupid version. Other viewers have suggested Speed Queen and Maytag.
Speed Queen is the highest rated but also one of the most expensive. I think they come with a 10 yr warranty but I don't want to spend $1400 for washing machine that I will likely leave in my condo when I sell it.
Kim, I am a professional appliance repairman for over 26 years --YES!! you are correct utter TRASH! These newer models (most of them) are utter China parts made disasters! Give me the old great 2000-2007 Whirlpool or Kenmore washers over this anyday.
GE set this in motion back in 1995 when they stupidly discontinued their filter-flos.
What's your recommendation to replace this washer? I hate this model 🎉
@@kimdecovich1198 There are two basic kinda "old style" washer that seem ok. Amana and Roper. They both are on lower end price and have the agitators inside. Although they still have the standard computer crap, they seem alot better in simplicity and repair friendly. Both can be usually purchased at Home depot or Lowes.
Screw GE!
@robp123451 ok thanks for the guidance. Got a Ge washer delivered yesterday. I can tell that it is trash. Hauling it back to the store this morning.
Mine goes out of balance all the time. Any suggestions? Today, sounds like the tub is banging against the walls of the tub and it moved so far that I could not get into the utility room. Any Suggestions?
None, sorry. Mine gets off balance even when I always equally distribute the load. Sometimes the items end up on one side of the tub and are dripping wet. This machine is capricious.
Did you level it up by turning the legs ?
What it does it when you have the lid up and you don’t shut it quickly after it fills up what it does is it drains itself. It’s terrible I can’t tell you how many times I forgot and it will drain for no reason
I just bought this one used and I was as shocked as you with the heavy cycle pathetic pausey action. Unbelievable.
Did you keep your GE or get a new one? I am looking at a Speed Queen TC5- any thoughts?
Still have the GE. I will look for a Speed Queen next time. If you buy one, let us know what you think.
@@KimTownsel Thanks. I found a new one with a dent for almost half price! TC-5.
Since you were so generous to share your experience, I am happy to reciprocate and share a bunch of tips I just heard directly from SQ. They welcome us to CALL them with the serial number on any machine you want to buy (e.g., used or scratch/dent.) They will quickly confirm the history over the phone e.g., when it was made and how much warranty is left. The one I am considering was made this year- still has a full 5 years warranty left or 4.5- not sure when the warranty kicks in but probably when I register it or buy it.
Downsides of the TC-5. The load size is smaller and it will be louder- 62dB's vs. 42dB's on the TR series (do not get TR). We are on a 2nd floor (condo) but we need a quality top loader (less smelly.) I do not want to deal with what you went through so I want to get this one- or a new one in the box if this one does not work out.
The SQ has a quality porcelain coated, metal outer tub (collects spin water.) Almost all washers I found including the Maytag Commercial us a cheap plastic tub that grows mold easier. It is also why this SQ is a tank and weighs nearly 200lbs. It does have a Prop65 warning I am not super happy about but I think it will be ok- they said it's inside some wiring that we will never come in contact with anyway. Let's hope so!
SQ also said to use White Vinegar (add inside the top of agitator) to soften cloths- not fabric softener (gets sticky and contributes to future mold- the issue we are having now big time on our front loader despite cleaning all we can.) Vinegar also really helps to keep the machine clean. She said less is more- regarding soap and vinegar.
Also, if you are coming from a HE machine, run the first wash of any cloths with NO soap. The machine will extract out of your cloths what was not extracted with the HE machine. This is why new customers complain their SQ machines are foaming over the water outlet with soap. They add too much soap and plus their cloths still have soap stuck inside the cloths. All great tips!
Now, the only hassle is getting it delivered here and lugging it up stairs. They are over an hour away and want $200. I would rather not go get it but will if needed. Saving nearly $500 on a new machine that has never even been plugged in!
Thank you so much! I hope other viewers read your post.
@@KimTownsel Thanks. Have since read some have a suds issue at the drain! I guess no washer is perfect. I think there are some hacks for it but having soap bubble out and onto the floor on a $1200 machine is not great. I think someone said the pump is too strong so it stirs up bubbles.
Hello, do you still have this washer? I’m worried about the noise because our washer and dryer outlets are in the kitchen which is pretty much attached to the living room.
I do still have it and it is NOISY!
@@KimTownsel okay that’s what I’m worried about. I wanted a washer that we could choose the water level but not at the expense of all the racket. We heard of a front loader that uses microban technology to prevent mold and have a vent system. We are looking at that right now.
This washer washes clothes for 40 mins, is there a short wash cycle? That is just washing cycle only, that's not counting the spin cycles or the rinse cycle. Which selection would be a short cycle?
Mine shows a "Speed Wash" option but I have never used it. Maybe other viewers who have will provide information.
I just bought the GE #GTW325ASWWW and so far I'm not so satisfied either...I agree with ya about the agitation noise...mine makes the same...not like my 26 year old GE Profile which I finally had to get rid of. I surely miss that one. So, when the guys installed it, they didn't know which hose to hook up to my Hot and Cold...since the faucets are both Black in color. They asked me and I told them I didn't know....well, stupid me, I tried a Warm wash instead of a cold wash. Everything seemed ok and I tipped them $20 and let them go. So, a day or two later, I did a Cold wash and Hot water came out. Ugh! They hooked up the hoses wrong! So, I'm waiting about 5-6 days for them to come back out and switch them. They were supposed to come earlier, but here in Memphis, we had a real bad snowstorm. So, they postponed it for 4 days. Hopefully, they'll fix it and also, the Final Spin kept going over 20 mins. and I know its not supposed to be that long. I had to stop it. Oy Vey! Too late to take it back to Home Depot. This is insane! By the way, Hot water comes out instead of Cold Water for the Rinse cycle since the hoses are mixed up. Maybe that's why the Final Spin was taking so long. I don't know.
I own this same embarrassing washer. It says soak in the dash but apparently it's not really a feature on this model
I'm also looking for a descent working washer, I've not found anything other than those commercial grade washer , and those todays commercial grade are probably not as good as those very common washers from the 70s. Very soon people will have to start washing by hands, back to square one.
HI. looks like the same i have. still do you have this washer machine?
the mine now, has a problem , leaking on the bottom :(
I do still have it. Yesterday, the machine walked itself about four inches out from the wall.
Hey the back bottom left side of my washer has a cap that’s missing on it it’s the same one as yours. I just moved I guess the cap fell off when movers moved it, could you tell me if you see what I mean on yours? I think it’s an agitator cap? Not sure, it pours out water since the cap isnt on 😭 so aggravating please help me!!
Please contact G.E. I don't want to move my washer to check this. It's already troubling enough without me moving it.
Thank you the review. Have you had any issues with lint being stuck to the clothes you just washed??
I haven't had trouble with lent. They're very tangled up so I think I'm going to have to use a lighter cycle.
My wife bought one just like this Saturday. I liked my old one and I think I could have fixed it. But the paper sticker with the ser. and mod. numbers had faded / washed away. And your SOL if you do not have them. Not impressed with this thing. Hope you were able to get yours fixed or find one that you like.
How do you add more water please help me
We have no idea. That is what we all want to know. Terrible machine.
@@KimTownsel I hate mine too
Any machine listed as a HE for high efficiency is going to give you very little water. More nonsense in the name of climate change.. Just had extra water from a bucket once it stops filling.
The worse whenever I wash my blankets and never spins my blankets it’s always wet I have to do it manually
Doe's anyone know why it spins and drain's sometimes..And what to do if it is leaking water when you turn it on..
IDK. Mine is still wacky after a few years. Tangles clothes, no matter the setting or water level. Walks itself across the floor.
Its price in my country is 500 dollars. Do you advise me to buy it?
No.
Thats about the same as in U.S. No. I would not recommend this machine either. I'm going to look at Whirlpool or Samsung Top loaders as replacement.
@@terryvlunsford1610
Thank you very much for this advice 🌹
Here is the long and short of it. There is only 1 Top loading washer that still works as it should and is not flimsy junk. That is the Speed Queen TC-5003. You will have to find a local dealer as they are not available in big box stores. A friend of mine had this washer. Hated it, Bought a Speed Queen and never looked back. The SQ is 100x better in quality and performance.
My apartment has Speed Queen Classic and it was the best thing ever. It still works!
We just got a bad LG on we're having the same problem so which one you recommend fortop loader washer?
I have no suggestions. 😣😢😭 Other viewers have made suggestions in the comments.
@@KimTownsel so what model did you buy?
@@pattrick7171 I'm still with that GE. I haven't seen anything else that seemed to be better.
@@KimTownsel queen speed Commercial White Top Load Washer - Tc5 AWN632SP116TW01
GE washer is a joke, I just bought one and the noise is killing me.
I bought this model 6 months ago . So far the machine does a fine job . The spin cycle spin so fast I thought it was going to hover like a ufo . Clothes come out so dry they hardly need to be put in the dryer. Kim I hope this helps you , after you set the washer push strart and leave it alone . If you just wait it will do its thing . Pushing buttons prematurely will confuse the electronics. Please let know if this works for ya 💕♥️😱
You are so right about the spin cycle. It is fast, loud, and thorough. You are also correct about pushing the start button and just leaving it alone. Thank you so much for leaving us a helpful comment.
EXACTLY....people need to learn to WAIT. I have a part time cleaning business, we do a lot of Air B&B's and corporate condo cleanings, somehow the owners and clients are always calling us about the washing machines....usually inpatient, middle age to older white women in a frenzy asking why the machine is not working, 9/10 times it's because they start hitting buttons or trying to change cycles thus causing the sensors to start timing in and turning off the interface for a minute while it starts to program. . I tell them to "hit the start button once...and WAIT 5 minutes". Almost ALWAYS it goes back on starting whatever cycle is programmed.
It's loud but I just got it, sister and cousin have it and the clothes always come out awesome!
I have one of these and I'm not impressed, even the highest setting of the water doesn't cover the clothes. What good is that? I have 5 gallon water containers that I put into the top washer to get the clothes covered. Again, not impressed.
You haven't heard Eurpean washers with brushed motor...
Loud?
@@KimTownsel you can see gorenje washer on my chanell
Mine is doing the same thing an I don't know what to do a sorry piece of crap work after I leave it unplugged for hours an then after a load of clothes it quits
I am shocked they still sell this model. It's terrible.
Mine too.
My neighbor just bought a GE washer and she misses her Kenmore 90 series it was similar to your dryer it starting leaking and I was going to fix it for her but I was out of town at the time, I told her to wait for me to come back but she didn’t want to
I wish my Kenmore had worked forever!
GE doesn't want them to last, that way they sell more units.
You are exactly correct.
dont waste your money on these new machines. The older machines are the way to go
It seems that way.
Where to go old style? I am searching around nothing. Thanks
Try a Speed Queen TC5
@@pgc476 used appliance stores
Omg!! I have this same noise machine and last night I had a load soaking over night everything was off and at 4 in the morning it starting rinsing by it self I got up and there was no lights on dashboard ..I had to unplug it to stop..this is second time this happened last time water was filling..Im leaving it unplugged..anyone else having same issues???? Scary!!
Same here.
Whirlpool washer is the best... My whirlpool just went bad, it was 15 years old... Now I have the one your reviewing... My new washer is quite to compare with the old one...
Thank you for the information!
I’ve watched other videos of this washer and this is what it sounds like. My plumbers wife has this machine and she said she’s pleased with it.
Thank you very much! I think I'm just going to have to get used to the noise. It seems to be cleaning my clothes well.
I have had this machine for one week and now it won’t fill with water. Piece of junk!
She’s spot on right.
My second one just shot craps after 3 years. The previous one lasted only 3 years as well. Both purchased new from Home Depot. It’s off to Lowe’s later today. I’ll be getting something else.
I just left Lowes. Bought a Maytag on sale. No more GE.
LMK how you like the Maytag, if you don't mind.
@@KimTownsel will do.
@@KimTownsel I received my Maytag washer yesterday. Manufactured by Whirlpool. Ran two loads through it. I barely knew it was running as its so quiet. The delivery men said the G.E.s are junk, and that this Maytag will be more durable with normal use.
I also received a new flat top Samsung self-cleaning oven.
I had identical problems with the G.E. matching dryers. Blew through two of them in six years. Two years ago I purchase an Amana dryer, also manufactured by Whirlpool. Seems to be holding up under normal use as well.
Lowe’s has good pricing on major appliances, but I’ve found their customer service to be not so good.
@@tubalcain6874 Thank you so much for the updates. In the past, I have had such good experiences with GE but based on these last two GE washers, as well as the high number of other viewers on my GE washing machines, I will not be buying another GE appliance.
Lol my old washer broke down I bought this one same problems. I foolishly thought all you had to do was plug it in. This is shocking please tell me you got used to it.
I am getting used to it. In my opinion, it is a subpar piece of modern technology.
My landlord just bought this one and the agitator falls off every load. Noatter how tight we put it it falls off. Can someone help me with this
There should be a bolt of some sort holding the agitator it’s shouldn’t come loose at all
Falls off ? I can't get mine off. It has a big I believe 7/16 socket size head. Remove the plastic fabric softener cup that sits in top of the agitator, and you can see it at the bottom.
I'm late to the post. just got mine today, and it sucks. thinking of returning it
I had a 20 year old washing and drying machines. I had to replace both. The washer for some reason was not washing the clothes like it used to and the dryer was burning the clothes. The laundry room has limited space so my husband and I went to Lowe's and purchased a GE model GTW465ASNWW washing machine along with a dryer GE model GTD42EASJWW. I don't mind the noise.You can't hear it when the door is closed. Thank goodness for that, my husband works at night and sleeps during the day. I only 2 issues…
1. It has five knobs, none of which do what I want (LOL). I want is to skip to the rinse cycle. Not possible
2. For some reason I cannot for the life of me figure out why I can’t smell the fabric softener or the lovely smelling Downy Unstoppables after the wash is done. My clothes seem to come out smelling like that new washing machine smell. Yuck!
I wish they made washing machines the way they use to. I miss my old machine when it worked well.
By the way the dryer is awesome.
I've had mine for 3 years and I'm having so many problems it's unreal
i honestly love this machine. i always keep it on precise fill so i know there will be enough water. but is there a cleaning cycle? i just wanna use the tablets to deep clean it. anyone have any tips?
A washing machine should be self-cleaning. Take your advice and put it on precise fill, add detergent, and start. Oh, snap. That won't add any water, right?
Mine wouldn't let me run water with the lid open. Maybe I'm not selecting something right
Sometimes it seems to pause on its own accord during the so-called fill cycle and I have to tap the button.
Always close the lid before you start the cycle. The first two sprays of water are normal. Once the Fill light turns on, you Can leave the lid up until the wash starts.
Thanks for the info,weird looking agitator and this washer is louder than a pinball machine.The buyer should be allowed to hear the machine cycle @ the store before buying and trying @ home .
Agreed. When I got home with it, then instruction booklet had a QR code where the buyer could listen to what the normal washing cycle stand a lot. However, by then it was too late to be helpful for comparison shopping because the consumer had already purchased the product.
It would also be nice if the person that sold you the washing machine had knowledge about it so when you went back to ask questions they could help. Definitely not a fan of this washing machine.
@@KimTownsel nice washer
I have the same exact washer not having any problems with it...
Jake Ringer give your GE washer 8 more months. :)
I just bought the washer and dryer and I just used it for the 1st time (the knobs have extra cycles now) It is a bit on the louder side but my water was filthy so I know it cleaned the heck out of my clothes (and that's what matters to me) and it's in the basement so I don't care.
By the way I noticed that you don’t put the deep rinse on, do you realize that it only gives you a spray rinse without the Deep Rinse light on? I definitely would use the deep rinse.
I am now using the deep rinse! Thanks for this info. This is why I am so supportive of RUclips... that we can share helpful strategies! :) You rock!
Kim Townsel I’m glad you read the comments, some people don’t. Most older machines automatically gave you a full deep rinse but now that they’re so cheap with the water you have to actually tell it, I want to deep rinse. Lol enjoy. 👍
I'll need to purchase a spare Deep Rinse bulb or two as that baby is going to be ON forever, from now on! thx for the good advice!
My GE washer had so many issues and stopped working after 4 years of use
in March 2011 , an article titled "How Washington Ruined Your Washing Machine" was posted in the Wall Street Journal. You can find that article online. Just do a search and read it. Basically , the EPA has an obsession with energy and water efficiency. Since 1996, the EPA has continually increased energy and water efficiency standards for appliances and manufacturers have to meet those standards. The result : Every appliance you shop for in America is designed primarily to use less energy and less water , even if that means compromising performance.
true we need to fire washington
Thank you, James!
It's still happening today. Nothing has changed!
Mine has only a tiny amount of water in it even when I select super load. Why doesn't it fill all the way up
Water saving feature. 🤨
@@KimTownsel this is the worst purchase I ever made
@@hellraiserharry 😭😭😭 I washed sheets and my bedspread today in separate loads with no off- balancing or drain failures. I was surprised. I still have two loads of clothes and one load of towels to wash. Pretty sure something will go wrong. Last week it DESTROYED one of my slips and tangled all of my pants.
Paid way too much for it too. I have the ge but different model, same problems
I just got this today... different model # but looks the same... and I cant hear it..I had one with no agitator and I hated it and it sounded like it was a airplane taking off all the time. And my clothes never came out clean.
Good to hear! Maybe GE has improved this type of washer.
we've had this same one for about 6 or 7 years now its only now giving us problems, "wont actually spin" but from my experience it's the user error and not knowing or trying to learn how to work the product for most people that causes these errors.
@Kim Townsel My parents just bought this GE washer model and were wondering how come the "Soak" cycle light doesn't come on unless you choose "Delicate" and even if we were to select this "Delicate" wash option, this GE washer model just "quickly skips over" the Soak cycle of the washing process. Does yours or anyone watching this who owns this GE washer model also experience the same aforementioned "Soak" cycle issue?
Greetings! Not sure. I have already completed all of my laundry for the week but will try to pay attention next weekend. This is a strange model washer, for sure.
@@KimTownsel Just to add, you will also notice that the "Soak" cycle indicator light does NOT light up upon opening this GE washer model's lid (as you would assume it will along with all the other cycle indicator light). Also, if you were turn the knob to select any other wash programs (except Delicate), the Soak cycle will be quickly skipped over as well. Let us know. Thanks!
@@AndyKYu I have noticed that if I make any change after initiating a wash cycle, the washer becomes very confused and takes a long time to adjust... sometimes it doesn't. :( I honestly do not recall the soak light ever coming on.
@@KimTownsel, you are correct about the Soak cycle indicator light doesn't come on ever (on my parents' GE washer model (same as yours featured in this RUclips video), it only comes on solid green when I turn the knob to "Delicate" washing program before I push the "Play/Pause" button. Furthermore, I observe that this GE washer model behaves in such a way that regardless of whichever washing program you select with the knob and press the 'Play/Pause' button afterward to start the washing process, it will go through the Fill, , goes straight to the Wash, Rinse, and Spin cycles. May you check and report back or post a new RUclips video of your GE washer model going through the wash process to see if it also just "skips" the Soak cycle after the Fill cycle and go directly to the "Wash" cycle by having your video camera focused on the cycle indicator lights throughout the washing process recording? This way, we can verify and conclude that the auto skipping of the Soak cycle is just simply how this GE washer model functions (a defect in my opinion as I believe a Soak cycle should be at least for 1-2 minutes). I'm going to also check on Google and contact GE Technical Support to learn more about this "Soak" cycle skipping and "Soak" indicator light not turning on ever (except when you turn the knob to "Delicate" wash program) issues for this particular GE washer model [GTW330ASK4WW]. Thanks!
Mine does the exact same thing.
you are lucky ,your machine is still working . My machine broke down in 13 days now it has been down for a month+ no replaced allowed
WOW!!! That is not fair.
It will begin to start walking forward within 3 years of ownership, after this model and 2 other cheap brands I did the research and saw a lot of comments saying the Commercial/Residential line of Maytag (about a $1000 US) beware of the cheaper digital model, the Commercial one is from the same line as the laundry place without the extra cost of the coin box, very solid,... So far so good, easy analog dials with extra rinse and presoak options,, almost old-school but strong motor and belt and gives you a true half and full tub of water instead of the High Efficiency models Congress passed a law some years ago restricting how much water went into the wash, usually the top stuff felt dry still, the one you reviewed here failed us badly as with several brands before, so the Commercial Maytag model is coming out on top even over those front loading GE etc models at twice the cost at least.
So I disagree about the Commercial Maytag. I have had the same problems this lady is having . Within 6 months, they had to replace the tub and motor. Now, the sensor is out. Always noisy! Im replacing mine. Tired of dealing with it. Bottom line, everything but speed queen is a piece of junk. I cant afford, unfortunately.
I got the same machine less than six months ago, and experiencing the same thing
My other washing machine was trash, it made a lot of noises, I couldn't go to sleep. I don't know what to do with it.
I have the same model. Won’t agitate or spin
Mmine washer is almost identical to yours, my model number is a GTW330 Wask3ww. My washer is also noisey, alot. When it's about to spin it goes out of whack, u balance?, plus it's tearing everyone's clothes. 👖👚👗👙🩳🩲👕👔It not in my budget to replace at the moment. But I do wash it tub all in then I start a cycle by it's self. Still sick washer. 🤯😠🙏
the washer was working perfectly fine, it is a good washer, but you might have to get used to the new sounds.
Being a new owner of a new high-efficiency belt drive washer like yours (a model GTW465) I half to say that most of the problems you are experiencing are due to your own error and lack of knowledge when using this washing machine. You seem to believe that this washer will work similarly to your old Kenmore direct drive however, it does not at all. The first piece of advice I must give to you is to always leave the load size selector knob on large or super. Any other lower water level will not cause sufficient rollover in your clothes during the wash cycle with medium or large-sized loads. Also, I recommend that you leave the deep rinse on for every cycle. It will cause the machine to fill and agitate during the rinse cycle like your previous Kenmore and will help to get stains out better. You can activate the deep rinse feature by pushing the deep rinse button on the left side of the cycle LEDs. The machine should remember that you have selected it for future washes with the particular cycle you activated it on, but you can make sure by checking to see if the light for it is on each time. The issue of you leaving the washer after initially starting it and coming back to it with an empty tup is proper functionality. If you leave this washer, or any other high-efficiency washer with water in the tub for more than 15 minutes while the cycle is paused, the washer will cancel the cycle and drain the water. Also, if you turn on the washing machine, leave the lid open, and walk away, then as soon as the cycle starts when the washer finished filling, the washer will immediately pause, and the auto water drain countdown will begin. In addition, the issue of you returning and not being able to cancel the cycle at 5:14 is not really an issue, but moreover how these washers are designed. You were unable to cancel the cycle due to how as I previously mentioned, when the washing machine drained the water, the cycle was also canceled. If this happens in the future, where you return to the machine having drained all the water with the drain pump still running, then turn the cycle selector knob until the LEDs light up. The reason why you can't do anything when the lights are off is because the control panel has gone into sleep mode, and you must input a command with any of the knobs to wake up the control panel to use the start button. At 7:36 this is exactly what I am talking about. You are attempting to use the washer when the control panel is in sleep mode, so the start button was not working. You then open and close the lid, which wakes up the control panel (the LEDs being on indicates it is ready for you to press start), you push start, and it works. You need to make sure that before every cycle the LEDs are on so you can push the start button. Another key point is that I recommend you modify the way you insert clothes and detergent into the washer. You should start putting in your clothes and detergent, even before you start the washing machine and then close the lid before you start it. You should also try to leave the lid closed for the entire cycle. This will eliminate the issue of the washer auto draining the water because you forgot to close the lid and walked away for over 15 minutes. What you hear at 10:07 is the "slow speed" agitation. On some cycles for the last 5 minutes of the wash, the washer enters slow speed agitation before it drains and spins. The reason why the washer does pulses of agitation is that it has no real low-speed setting, so it just pulses the high-speed setting. Practically no new washers have a slow-speed setting built in the motor for agitation anymore. The last and final point I would like to make is about the spin cycle with bulky items and how the washer may seem to go out of balance when it initially starts spinning. If you happen to hear the washing machine come out of balance when it is spinning, here is what you should immediately do. As soon as you hear the tub start hitting the walls of the washer cabinet start counting to 10. If the washer stops banging before you get to 10 and is still spinning, then let it spin however, if the washer continues to bang for more than 10 seconds or stops itself, then you will need to redistribute the load manually. You will also need to redistribute it manually if the spin light is blinking and the washer is just sitting there. This may happen twice during a spin cycle, once when the washer initially starts spinning and again when it goes to ramp up to full speed. Here is an example of one of the washers initially going out of balance, but was able to correct itself in under 10 seconds: ruclips.net/video/LjPV6Me0OZk/видео.html
Thank you for your honesty,
I feel like you. I hate this machine and it wasn't cheap were I live, I have issues you did not address. Just know it's not you this is not a good washer, I feel we all should be given a refund.
.
What is the model number of your washer and what were the issues you were experiencing with your machine? I personally understand what you are talking about. This washer could be made so much better and easier to use with minor design tweaks on the same platform, but as far as I am concerned all new washing machines are like this. If your not looking to get your washer from a tech company and can't find a Speed Queen or used washer your options are pretty much a Whirlpool VMW washer, or a Ge.
Yes, to all this… I was thinking all this while watching. After reading instructions and washing a load or two mine still works just fine and always has. Idk what people expect with a low middle price range.
Hi should this machine fill up on rinse to rinse. Mine just sprays while spinning then drains. It does not fill up. Is that what it's suppose to do?
Mine doesn't fill to rinse.
I have the same one exactly same noises etc. I had a whirlpool for 20 years and I also returned 2 of these stating the were defective. It is the (New Top Loader they said)! My current issue is mold growing inside the agitator under fabric softener cup. It says not to put anything in this hollow cavity but it's black mold and its getting on clothes when washing. Hmm? It smells horrendous and the whole laundry room smells like mold. I checked out your video to see if this was your issue. It was not. Mine is 2 years old now. Have been unhappy since the 3rd one was delivered. Also I always push Deep water button first you get double the amount of water just FYI. If anyone can look under the fabric softener cup and tell me if its also moldy I could certainly use the advice. Thanks
Mine makes this noise I literally came to RUclips just to hear if it was just mine
Apparently it is "normal" and we are just supposed to accept this as "modern technology." :/
Me too wow! Thank you for sharing the information.
Lol thats why i am here
Me too 🤣🤣
Same I got scared because I barely swapped it because the other was making a squeaky sound 😂
Omg! It's supposed to sound that way? I thought mine I just had delivered this morning was broken. I can't imagine it being able to clean anything with such pitiful washer movement
IKR??? I am astounded that modern technology offers this as acceptable. 😨😭😠
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
I just bought this model from Home Depot today. A floor model for $447.00. No instruction booklet. I’ve done 4 loads of laundry, a small speed load ( quick wash) of gym clothes. 8 bathroom towels on super mode & deep rinse cycle. And then a comforter & sheets & pillow cases. Everything came out excellent. Try the settings. It’s not that noisy IMO. Compared to my old bare bones amana this thing is a Rolls Royce!
@@MrStukaju87d falling out laughing about your last sentence. 😂
I bought the one with no agitator, just the open tub. We put the dry detergent on top after loading. It went through the full wash cycle, opened up the lid and the soap was still ontop. Still dry!
Just like you, we ended up with this machine, if we don't start the water add soap, and stir, we get soap residue on the bottom clothes.
Forget washing large sheets, comforters, and blankets.
I use the highest water level no matter how many clothes, towels, or linens. When I used their water levels, the laundry barely was damp. :(
@@KimTownsel It's not you, we've went through at least 10 different washers. Exchanging them, returning buying different models. All from Lowes.
Another dirty lil secret, every washer we returned, exchanged, was placed back out on the floor with a 10% markdown, and sold as scratch n dent...
@@vegascolors WoW!!! 😟😦😢
I have same model, but ends in 2WW, everything else identical.
This machine is a complicated mess, the clothes at times comes out with small dry areas that look like never made contact with water. Not to mention..there’s a trouble shooting code sheet taped under inside side panel with which to help one determine what’s causing issues that will arise, in our case it stopped spinning, because the lid lock broke…again a RUclips clip saved the day.
Agree with you…wouldnt recommend to worst enemy. Used to love our old GE washer from the 90s. The last 2 only got worse.
Don’t slam that lid.
thank you so much for posting! saved me the money :). I bought an LG top loader with no agitator a few years ago and was so unhappy...clothes come out dirty still. Looking for something better but not super expensive.
Glad I could help! Let us know if you buy something that works.
The older ones are the Best anything made by Whirlpool is good
Thanks!
This the way my Maytag bravos sounded. I have recently purchased this and have no issues. It’s belt driven. You need the direct drive they are quieter I think you will like it better
Thanks for the info!
They all sound like this unless you splurge for the $700 plus machines. You are correct about the belt driven machines. I do know that direct drive is more sturdy and expensive, but belt driven ones can be easily fixed for cheaper, thus overall can last longer if you are willing to repair it if that goes out. Anyway, you get what you pay for, all machines now are built to last 3-5 years....and unless you pay about $300 more, you get a little more noise. I just bought a GW 4.5 Cu ft, it's probably louder than this one, but who cares! it makes about the same noise as my dishwasher in my kitchen. Two loads a week comes out to about two hours where I have to deal with this noise. Seriously not an issue to me.
I have this same machine at home too. It's soooo awful. It takes 20 mins just to slowly fill the Machine. It doesn't use enough water. I've had clothes come out overloaded with soap and others smelling sweaty.
I've had to re wash clothes and they still don't get cleaned.
It takes almost 2 hours to run a load, Which is way too long. It backs up the laundry so bad.
I've gotten so frustrated that I went to the laundromat.
OMG yes I have the same issue!!!
Kim you are looking at in contrast to old school washers. These new machines have been tried and tested. They save water. You dont have to soak clothes with mega gallons in order the wash them good. You saturate them and let them move and the filth is loosened up. The rinse cycle does get them really wet to wash out the filth but to saturate the load in lower levels of water is a cheaper way to get them clean like Great Grand Ma used too. Sure lots of water cleanses but its not needed.
I understand about the less water but the machine has other features that are subpar. It is too noisy, it takes too long to wash, the technological features don't allow changes for the cycle, and it gets stuck on a cycle and will not let you change your mind. There is more technological progress than merely saving water.
We have the GE GTW220 (ACK5WW) the landlord bought it to replace the GE that went out. I just left it for a few minutes to get some more clothes, came back, the machine decided to empty out all the water and detergent I had put in, so now I lost detergent, looks like GE is in the detergent business as well. The cycles don't make sense, I read the entire instruction manual, it never says what HEAVY, MEDIUM and LIGHT does, the water temperatures are ridiculous, the water that comes out to fill the tub is never what you select, yes, my HOT and COLD water hoses are properly connected, I double checked them. There is no place to put in the fabric softener. Yes, you heard that right, THERE IS NO FABRIC SOFTENER CUP. So you have to stand in front of the machine and wait... and wait.... and wait... GE should just get out of the appliance business, I'm sure Apple or Toyota would make a much better and more logical washing machine. Machine is pretty quiet, but then again, if you're listening for the water sound so you can run back to put in the fabric softener, the quietness isn't helpful. If this was my property I'd return this piece of shit right back to wherever it came from.
Maybe I should state the ONE and only thing I like about this as a washing Machine. It gets my clothes clean when I get it to WORK right. 😂😂😂The sound is weird to me too. My house must be well insulated or I’m going deaf my old age but the volume doesn’t bother me just everything else about it. My old washing machine was 35 years old so it’s been a long time so maybe they’re all like this I don’t know but I agree with you hundred percent I do not like the washing machine. I would not recommend it to anyone. I like to add water and agitate for a little while to mix my detergent then put in my clothes then have it fill the rest of the way. I don’t think that’s a possibility with this washer. Thank you so much for putting out this video.
PS I am old hahaha and I do have a hearing problems but now that you mention it all I heard yesterday was that weird sound coming from my washing machine! I chuckled every time I heard my washing machine. So if it helps you made me smile quite often yesterday. 😂🤣😂
Gosh thank you for this video, I just bought this washing machine. Same thing happened to me, I couldn't stop it for anything in the world! Also, it does NOT NOT NOT add enough water I just don't understand why, what is with these new machines!!!! GE ...HELP!!!!!!
I didn't want an HE because NO ONE should be controlled on which type of detergent to use! I still don't understand how to turn it on! I hate that I can't turn the buttons to re-rinse whenever I'd like! It is loud and whenever I'm washing a heavy load, it practically stops and sounds like it is pausing between each churn!
I'm so UNHAPPY, because there aren't many choices when it comes to shopping for washing machines.... all the stupid washers say HE....that means I can't use the Mexican detergents I love!
I bought this washer because it's not an HE and therefore I can use Ariel or Zote Soap to whiten my socks!
I'm glad that the agitator (medium only) works like a normal washing machine and not in slow motion!!!! Honestly I wish GE will come up with a better NONE-HE washing machine than this weird one and let us exchange this weird machine for a good old fashion conventional one!
I wished that GE would bring back the older style Filter Flo, and Rim Flo washers-the REAL washers-instead of this plastic junk they are making now!
I remember the Filter-Flo style. I think manufacturers make appliances to last only a short time, forcing us to become a consumer of whatever they are selling. :(
Exactly!
Como puedo programar mi lavadora es esa misma marca y esa numeración pero no tira el suavitel y keda mojada mi ropa y antes no lo asia si saben se los agradecería
Y la luz de spin prende y apaga
Puse el mío para el nivel de agua más alto. Si solo tengo una carga más pequeña, utilizo la configuración ligera o media; de lo contrario, los artículos se enredan más allá de lo imaginable. He aprendido a no seguir presionando botones o cambiando ciclos porque la máquina no puede cambiar así. Es muy lento para comenzar.
I set mine for the highest water level. If I have only a smaller load, I use the light or medium setting; otherwise the items are tangled beyond belief. I have learned to not keep pushing buttons or changing cycles because the machine cannot change like that. It is very slow to start.
Hi, ty for doing this video and sharing the way the washer works. I seriously thought my washer was broken and am trying to find a way to make it quieter when washing. I am sorry for the other issues you have with yours though. I think GE should give you a full refund and you should be able to get a diff brand 1 and hopefully that will work better for you. I dont mind the pauses it does for the cycles, I just dont like how loud it is.
Thank you, Lori. From what I have learned from others, this is just how "modern" washers sound and function. Disappointing. Thank you for watching and leaving a positive comment. 😎
I absolutely hate the new washers they are building now. I was able to obtain a new Speed Queen back in 2017 before they made the design change. It has the old-school agitator and wash style. I'm glad I bought it before 2018, because from what I understand, everything after 2018 sucks.
The GE Filter Flo washers from the 1960's through the early 1990's were the best! I loved those!!