Do an install video for this, it will be interesting to see the before and after for space savings. The OEM setup obviously works but more room is always good to have. Love the vid!
I solved the poor water pump issue on my 86, by using a 94/95 timing cover and water pump and making a one off adapter for the pulley to get the correct offset. That kit is nice, but if you have a Vortech Supercharger it won't work with it.
AWESOME HOLLEY!! GREAT STUFF.................NOW how did HOLLEY get a 50 State legal CARB rating for EMISSIONS??? There is no mounting for the SMOG PUMP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Required for EMISSIONS COMPLIANCE!!!!!!!! $2400.00 spent to find out it WON'T PASS EMISSIONS, BTW you need the smog pump to provide air to the cats or THEY WILL FRY and CLOG UP!!!!!!!!!!!!!!!!! WAAAAAAY to go HOLLEY!!!!!!! Other than that great setup I would love to have it but compatible with the SMOG PUMP!!!!!!!!!!
This looks great but I would like to know if other alternators work since it comes with a 150 amp I know lots of us have stepped up to 180 or 200 amp alternators. I'm always looking for room on my single turbo setup!
Wow, that’s nice. I wish the Ford factory people old Henry. Whoever is running that juke joint up there would put in some aftermarket support for people Ford people. It’s not hard for them to design stuff today. It’s all computer done you put in your parameters and you come up with a part, that’s a good looking system and that’s not bad money because you’re gonna have a lot more room upfront and it’s gonna look better
I wanna see the after shot of the Engine bay for how much Space is created but the Weight savings as well, because "racecar". So will there be a change(Gain) in HP?
Bout time holley gave us ford guys something theyve got 10 different accessory drives for ls motors it's kinda high price but it'll come down just like the ls stuff did by then my engine bay will hopefully be done n painted😊
This solves problems for me. My donor car is missing accessory drive components. Bit pricey but whatever. I’m glad you showcased this, I’ll be making a purchase.
Do you live in a emissions compliant state?? This Holley setup does not allow for smog pump compatibility to drive on the street and I'm pretty sure it is not emissions compliant, might want to check into that, especially if you live in California!!! Also the catalytic convertors need air from the smog pump or they will overheat and clog up over a short period of time........
2400 bucks?? Yeah, the market is being supported but not everyone that has these cars got the money like that. Again, the parts look beautiful but not 2400 bucks beautiful. We on a budget out here!!🤣🤣🤣
That's a cool setup, it kind of reminds me of the set up like new edge 4.6 2V but newer of course the mod motors give more room up front of the motor. A cool concept for the old pushrod motors.
CVF , Much better than that holley "chinese - American Blend 🤔🤬 CVF is Billet Alum etc etc And Less! GL Brother!!! Oh Thats a typical 6 Rib set up isnt it? CVF is 8 Rib ,,,,Just wanted to be clear
That's funny considering it's the same power steering pump and the sbf kit with the electric water pump is not cheaply built by any means holly just retro fitted all LS parts from the LS kit to the small block Ford timing cover and added a hell of a price tag 500 for a timing cover is a lil ridiculous even you know that
Put the Holley Mod drive on my 49 Olds with a 383 SBC and it is an amazing kit. Don’t get me wrong my Billet Specialties Front drive on my 450CI FE Ford is astonishing but the Holley kit is clean as hell.
Do an install video for this, it will be interesting to see the before and after for space savings. The OEM setup obviously works but more room is always good to have. Love the vid!
This opens opportunities for swaps in tight areas such as Factory 5 cars, Ranger swaps, etc. Pretty cool!
Awesome to see companies still engineering new parts for these cars..long live the foxbody!!
And congrats on 100k subs brotha
Neat but 9/10 fox body owners are gonna hard pass at this price point.
You sound like a poor
19/20😂
Say "hello" to #10! LOL!!! Just bought it!
I solved the poor water pump issue on my 86, by using a 94/95 timing cover and water pump and making a one off adapter for the pulley to get the correct offset. That kit is nice, but if you have a Vortech Supercharger it won't work with it.
Yeah I like my sn setup. Much easier to change a water pump, timing cover. You don’t have ask the different brackets and ten different length bolts.
This equates to additional foxbody Drivability... fixes alot of issues with these cars relating to accessories... great content Caleb!
The best thing I've seen come out for a fox is the full frame they just showed at sema show this year
20k for a full frame nahhhh
Outstanding! Thanks for highlighting.....I just ordered it!
That is really awesome! Appreciate you sharing these new products!
Sadly......$2,400 a little tough to justify for a toy, when it doesn't make it significantly faster!!!
AWESOME HOLLEY!! GREAT STUFF.................NOW how did HOLLEY get a 50 State legal CARB rating for EMISSIONS??? There is no mounting for the SMOG PUMP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Required for EMISSIONS COMPLIANCE!!!!!!!!
$2400.00 spent to find out it WON'T PASS EMISSIONS, BTW you need the smog pump to provide air to the cats or THEY WILL FRY and CLOG UP!!!!!!!!!!!!!!!!! WAAAAAAY to go HOLLEY!!!!!!! Other than that great setup I would love to have it but compatible with the SMOG PUMP!!!!!!!!!!
Thanks holley I will stick with my explorer setup and volvo electrical pwr steering
This is a very cool product whose time has come.
What about alternator relocation for supercharged applications? I really like this setup!
The Popstang needs to live again!
Poor thing needed some attention
Nice! Good intro - my poor 89 has sat for almost 2 years awaiting an engine build. Other projects are in line first - 85 Ramcharger 360
Lol thanks buddy!
@@FoxcastMedia You are welcome. I was going to head down to LMR event, but was in the middle of selling the 96 F150 project from this summer.
Damn I thought pops car was getting boost finally lol
This looks great but I would like to know if other alternators work since it comes with a 150 amp I know lots of us have stepped up to 180 or 200 amp alternators. I'm always looking for room on my single turbo setup!
Hell yea! Maybe a bit pricey but what a sweet setup for sure!
Wow, that's a game changer !!
Gm LS acessories on a ford…i love it
It is a nice clean setup but the problem I see with it is the availability of that peticular water pump 10 years down the road.
I wonder if this would allow someone to run twins with off the shelf headers and keep ac/ps?
I found a stock Billet timing cover from Australia. Tremaniac racing!!!
Wow, that’s nice. I wish the Ford factory people old Henry. Whoever is running that juke joint up there would put in some aftermarket support for people Ford people. It’s not hard for them to design stuff today. It’s all computer done you put in your parameters and you come up with a part, that’s a good looking system and that’s not bad money because you’re gonna have a lot more room upfront and it’s gonna look better
That looks great. Hopefully they have something Vortech compatible in the works.
Yeah a Vortech wont work, but they may add something down the road, but a turbo sure will 😎
Cool looking setup. Wonder how far off my Kenne Bell would be offset?
Good question, not sure on that one
I was looking at that on the Holley website today! Going to be cool to see it installed!
Killer looking product
Very nice!
this looks sick, I might have to pick it up
Do you think you can keep a SVE 200 amp alternator with this set up?
I wanna see the after shot of the Engine bay for how much Space is created but the Weight savings as well, because "racecar". So will there be a change(Gain) in HP?
Bout time holley gave us ford guys something theyve got 10 different accessory drives for ls motors it's kinda high price but it'll come down just like the ls stuff did by then my engine bay will hopefully be done n painted😊
That’s awesome!
Isnt the car your father in laws.... Why doesn't he have it... Its not even yours.. lol
@@doublerrated6735 its my wife's, her father bought it new.
What happens when the front cover pits like the oem one does? Can it be bought separate and does it cost 800 just for the timing cover?
thats bad azz, i didnt even know that was a thing
Yeah me either, its amazing the work they put into designing it
Best intro ever. I wonder if Vortech blower kits are adaptive
THanks buddy!
This solves problems for me. My donor car is missing accessory drive components. Bit pricey but whatever. I’m glad you showcased this, I’ll be making a purchase.
Do you live in a emissions compliant state?? This Holley setup does not allow for smog pump compatibility to drive on the street and I'm pretty sure it is not emissions compliant, might want to check into that, especially if you live in California!!! Also the catalytic convertors need air from the smog pump or they will overheat and clog up over a short period of time........
If pops car is still sittin he may as well be sittin with a 5 speed!awesome kit, maybe one day lol happy Thanksgiving man
Yes, this kit is based on the 7.3 Godzilla design. I bought it for my 7.3 swap. Great kit.
Love the intro
I'm glad their making new parts for our old foxbodies but $2300.😮
exactly
Yeah its pricey, but when you add up the costs of all the parts individually, it makes sense
Parts ain’t cheap for anything these days.
@@FoxcastMedia
2400 will do a lot for you engine power or chassis set up.
Love it but the Price sucks Big time 😢
Wonder if it works with a Vortech supercharger kit?
Epic 🎉🎉🎉
Pops car needs some t trim action ! 4r 70w internals in the trans ! She could make some real steam
I love this look, would this set-up work good with supercharger (Vortech V1 S-trim)
I dont think so, but a turbo would
Oh man, my wife is going to kill me!! Gotta have it!
Nice.👍
NO! That was good!😂😂😂😂
That's a awesome kit 👌 but it pops car is still mad at you. You can try a new hatch rifle or maybe a consel sig
Soooo.,.. how will the supercharger set ups line up ??
Looking for your feedback after the install to determine if it’s worth the investment.
Please have a before and after shot
Bought my foxbody for less than that kit..It is nice though
I can’t find this on LMR. What section?
Built Ford tough with Chevy stuff… 😂😂😂
Thanks for the updates bro have a great turkey day you and the family ❤uall ok later 🏁 💪🏼 🇺🇲 👍 supercharger next time
You as well buddy!
my only problem is if the water pump goes bad
Only thing I don’t like about it is using Chevy parts but it is a really cool design.
Dang that price, got me by the balls. 🏈 🏀 Welp, guess i gotta get it if i want space for a turbo & maybe supercharger.
Dam that's expensive 🔧🚗🇺🇸🙌🦊🐎👊💪
So with all these GM parts are we gonna have to deal with all the GM leaks?😂😂
2400 bucks gonna be a no for me
What's the knife????
I'm gonna say your clutch fan isn't gonna work with it.
It needs to get gone anyway lol
Hey what knife was that i like it@FoxcastMedia
2400 bucks?? Yeah, the market is being supported but not everyone that has these cars got the money like that. Again, the parts look beautiful but not 2400 bucks beautiful. We on a budget out here!!🤣🤣🤣
😂. I like the old ford power steering noise 😊
Mine doesn't make noise. The old 90 Town Car had 355,000 on it before it started humming. 🤔🤔🤔
Ball joint squeaking also?
That's a cool setup, it kind of reminds me of the set up like new edge 4.6 2V but newer of course the mod
motors give more room up front of the motor. A cool concept for the old pushrod motors.
I can think of about 100 better ways to spend 2400 bucks on my foxes. No thanks 😂
Coyote
$2400! Good granny! NOPE. Stock is fine.
Does this work with the 351 also?
What if you have a supercharger
Power steering... what's that? Mine has no power steering! 😃 I require a smog pump.
2500.00 for a Corvette serpentine belt set up maken your 5.0 looking like a Ls swap.i pass I only do the alternator up grade.
Too much money.
Way too much.
CVF , Much better than that holley "chinese - American Blend 🤔🤬 CVF is Billet Alum etc etc And Less! GL Brother!!! Oh Thats a typical 6 Rib set up isnt it? CVF is 8 Rib ,,,,Just wanted to be clear
Those kits look cheap ass hell. They are ugly
I agree basically what this is but 3 or 4 times the price
That kit looks cheap as hell. Way to tacky looking also. Guarantee that kit goes to shit quick from cvf
That's funny considering it's the same power steering pump and the sbf kit with the electric water pump is not cheaply built by any means holly just retro fitted all LS parts from the LS kit to the small block Ford timing cover and added a hell of a price tag 500 for a timing cover is a lil ridiculous even you know that
Put the Holley Mod drive on my 49 Olds with a 383 SBC and it is an amazing kit. Don’t get me wrong my Billet Specialties Front drive on my 450CI FE Ford is astonishing but the Holley kit is clean as hell.
Just buy a LS it probably be cheaper u fix ur clearance issue and hp issue at the same time lol😅