Behringer Bass V-Amp Pro setup

This is a quick review of how to make adjustments to the Behringer Bass V-Amp Pro. I felt the manual was not well written but once I figured it out, It was easy. I hope this is helpful.

[@davidevans1420]

Bought one of these to use with my acoustic bass in a few live performances. Like you said the manual was not helpful, so I actually get it now. I was going to put it our on Ebay, but after watching your video, I will save it for my home studio. Thanks for taking the time to make this video...

[@dgarTCAizzle]

I am greatly indebted to you. THANKS! I am on a V-Amp guitar modeler with the midi footboard, and COULD NOT figure out hot to save new settings

[@MerejoHerm]

Great,Thanks for taking the time!

[@RenaissancManEng]

Showin which output to use might make this a decent video.

[@WarrioRAbsolutE]

Christopher Walken is that you?

[@nickatrock]

Thanks for this video, it's helpful.. 'cause like what you say, the manual is confusing....

[@lileulileu]

Thank You very much!!! Regards from Bulgaria!

[@Rmanpc2323]

Thanks so much!

[@davidvalens3337]

no sounds?

[@roycatherall5386]

Hi
Have you ever come across a situation where the front output doesn't work
Thanks

[@gustavoadriansalerno126]

Buenas ...quería saber si alguno probó conectar el vamp3 en un bajo?y que sucede si lo hago gracias.

[@TVguy9999]

Helpful

[@michaelmarzolo2698]

Is there a foot pedal/midi to switch patches I assume? Thanks

[@Barry101er]

Thanks! Seems like a good buy.

[@papaidodekiekin3089]

Thanks.for the clarification!! Manual is way too complex and confusing

[@grandmasterbasserful]

Is there a foot pedal for this?

[@salottin]

I REALLY want to get one now

[@Elliswasp79]

I have just purchased one of these and I wish to use it live and I am wondering how I can run this alongside my boss ME 50 B. Is there a way to have this on and have no sound effects running through it until I want to as you can with a pedal board?

[@Brak0777]

Thanks for asking but unfortunately I'm not sure how.

[@sharevari]

What about the Edit/Drive control? If you enter it, you can select 1-4 but I have no idea what they mean.

[@martinmidgley7544]

They are the 4 stomp boxes available. Try them :-)
As the guy says in the video: the manual can be a bit of a train wreck to help with specifics. Here´s a decent user guide with tips and tricks
www.zinfanus.com/vamp/tips.pdf

[@ShadovvV]

How do you save to the "2nd PAR" Tap button ?

[@robbie7345]

Hi. Was curious if you have an email. Have a couple questions. Wanting to find out best way to connect this to the Behringer ax4500h head. Also best way to wire it for just using the V-Amp to record directly to my DAW...Would GREATLY appreciate any help!!!

[@iammadeleen]

Robbie D same :)

[@alsmoviebarn]

That bass amp has a "return" jack on the front, connect the line out of this unit to there and it will go straight into its power amp section. As for recording, if you can, use the digital out on the back of this unit, some sound cards will have an SPDIF in. If you don't have that then just connect a jack lead from line out > line in of your sound card. :)

[@AtrociousSal]

Great video

[@kyokeyo]

i use for guitar and sound module

[@kwaz1muzik]

is this connected to a patchbay? If so, how do you connect it?

[@Brak0777]

No, just directly into a amp. There is a way to assign different signals out the back, however I never really got that deep. Sorry.

[@davidvalens3337]

Is it worth buying for bass?

[@governancati5018]

david valens I do have a Bass V-Amp Pro, exactly as this one that is shown in the video. I would say it is a pretty nice amp simulator. I usually play at the church and the bass sound goes to PA, so I wanted to bring more color to my bass sound and make it more natural making people feel they are hearing the sound coming straight from the cabinet. It does it very well considering the low price for it. Definitely it is an option to consider if you are looking for an amp simulator for bass

[@N8tiveKEYS21]

Do you know why my head doesn’t work with my cab

[@Brak0777]

I have no idea because there is not enough info in your question. I would try to connect with other bass players in your area or go to a music shop for help. They may be able to help you.

[@peterodonnell1057]

Is there a video on how to save user patches ?

[@sabin97]

5 years too late but if you hold the letter it eventually blinks which means it has saved your changes.

[@larrylehman751]

This for a bass guitar mainly

[@wullie1mccreadie219]

Yes this is the bass specific model.

[@Lets_Go_Canes]

Not really. They marketed that way. Always thought that was odd.

[@govindsharma9878]

I HEARD NOISE

[@briangreene7085]

Do you still hear them Clarice!, You still wake up sometimes, don't you? You wake up in the dark and hear the screaming of the lambs! thhh thhh thhhh thhh!