- Видео 59
- Просмотров 192 408
brak 0777
Добавлен 10 ноя 2006
On Stage RS7705 Amplifier Stand unboxing
This is a box opening of a On Stage RS7705 Amplifier Stand. When I was deciding if I wanted to buy this stand, I was hoping to see a video on one of these and I couldn’t find one. Hopefully this is helpful for you to decide if it is the stand for you. I was a little mixed up as to how the stand works, as you see in the video. I’ve attached the description of the stand below. Enjoy!!
This pro stand features a fully-adjustable tilt angle for precision placement of a wide range of amps, monitors and speaker cabinets. The locking tilt mechanism features 48 teeth for the utmost in security. Its 1" square steel tubing is very strong and holds even large amps. Arms are 12" long, approximately 16"...
This pro stand features a fully-adjustable tilt angle for precision placement of a wide range of amps, monitors and speaker cabinets. The locking tilt mechanism features 48 teeth for the utmost in security. Its 1" square steel tubing is very strong and holds even large amps. Arms are 12" long, approximately 16"...
Просмотров: 1 026
Видео
Pinball cabinet painting. Test with Rust-oleum Marble paint
Просмотров 4772 года назад
Testing the Rust-oleum Marble spray paint to see if it is effective in recreating the webbing effect found on old Gottlieb EM pinball machines. Take a look.
Tech 21 GED-2112 dual output to single output jumper fix.
Просмотров 3,6 тыс.4 года назад
The Geddy Lee Tech 21 GED-2112 is normally a dual output rack mounted preamp. This video shows you how you can change it from a dual output to a single output by simply moving one jumper inside of the unit. This may void your warranty so take care when choosing to make this change.
Black Knight Backbox lighting
Просмотров 1994 года назад
I used various LED colored lights to make the Black Knight backglass really pop out. Please watch it to the end were I provide a template for the colors and give you pictures of the part numbers of the bilbs you can order at Comet Pinball. Thanks for watching.
Mixing Station X Air Pro App custom set up tutorial for the Behringer XR 18, 16, and 12.
Просмотров 43 тыс.6 лет назад
This is a video showing how to customize your Mixing Station X Air Pro. This is a excellent application to control your XR18. Also check out these two videos below. These were tremendously helpful to me. ruclips.net/video/qbMSO0enZ3w/видео.html ruclips.net/video/NnyHapzRgxE/видео.html
Fender T-Bucket Acoustic bass case fix!
Просмотров 1,2 тыс.7 лет назад
I have been unable to find a proper case for my Fender acoustic bass guitar. The one that is recommended by Fender does not fit due to the tuning pegs being too big. This is my fix altering a hard case that I bought from the Guitar Center. Hopefully this is helpful. If for any reason you're able to find the proper case, please comment below and give the part number of the case in order to help ...
Gottlieb Mayfair Pinball Machine rule set and demonstration.
Просмотров 2617 лет назад
This video is of the 1966 Gottlieb Mayfair Pinball machine. I show the rule set and demonstrate the play of the machine. I bought this game not working and needed a lot of work. Please see my other video documenting the work I did on this machine. This demonstration was recorded using the XSplit Broadcaster software.
Gottlieb Mayfair Pinball Machine Restoration project
Просмотров 2,9 тыс.7 лет назад
Gottlieb Mayfair Pinball Machine Restoration project
Gottlieb Mayfair Pinball machine game play description.
Просмотров 7367 лет назад
This is a video explain the rule set for the Gotlieb Mayfair Pinball machine.
Gottlieb Pinball Machine Metal post cleaning
Просмотров 5037 лет назад
Gottlieb Pinball Machine Metal post cleaning
Williams Travel Time pinball machine Demo
Просмотров 1,7 тыс.7 лет назад
Williams Travel Time pinball machine Demo
Bally's Silver Sails Bingo Pinball machine Demonstration
Просмотров 4,7 тыс.7 лет назад
Bally's Silver Sails Bingo Pinball machine Demonstration
Bally Frolics Bingo Pinball Machine
Просмотров 1,8 тыс.7 лет назад
Bally Frolics Bingo Pinball Machine
Kiss sets off fire alarm in Duluth MN August 3rd 2016
Просмотров 18 тыс.8 лет назад
Kiss sets off fire alarm in Duluth MN August 3rd 2016
Fight for the Weekend's first song with a new name.
Просмотров 928 лет назад
Fight for the Weekend's first song with a new name.
Fight for the Weekend's new song and name change.
Просмотров 1008 лет назад
Fight for the Weekend's new song and name change.
14:04 doesn't sound funny to me. And neither it sounds wrong or incorrect. It sounds excellent. I mean, anything in this video sounds excellent, compared to most of current product demonstrations, overall.
I must admit that I've been underestimating the Roland TD-7 kit. I think it is as original and great sounding, as the Simmons SDS V set was original and great sounding. Sure, the SDS V might have had an advantage in looks and the expressiveness of the analog sound; however, the TD-7 takes it to the next level in terms of versatility and the ability to sound like an acoustic kit. The kick trigger is an original design, as are the compact 7 inch pads. Later on the 9 inch pads came along, which look a bit better, closer to Simmons pad sizes. Anyway, I guess I can't hide it any longer, the SDS V and TD-7 are my favorite drum kits. I also like the keyboards featured in this video, the wonderful Roland A-80 weighted action MIDI controller and the excellent JV-80 subtractive synthesizer. Amazing stuff, really. Sure, the TD-10 is another breakthrough with physical modelling sound and the mesh pads, but I can really appreciate now how amazing the TD-7 kit really is. Of course, it wouldn't be an immediate realization without the skill level of the TD-7 demonstrator. It's like with most instruments, 99% of the effect is the player, the instrument is the remaining 1%.
duct tape... just sayin'.
I am in the UK and I mainly renovate Juke Boxes however I have just spotted one of these for sale. Thanks to you video I am now going to buy this to renovate. Really enjoyed this.
Does a bass amp need a stand?
Easiest… best way: XLR out of Deep, XLR out of drive… into recording interface. Each on its on channel in your DAW of choice… blend. And blend. One dirty, one cleaner. Sansamp is the shit.
What an engaging demonstration of such a compelling product! This really makes me want to get an electronic drumkit.
I have one of these. love it
Thank you
The Roland SC-88 and Roland JV drums are based on these samples.
Thank you
Thanks. Tech 21 did a horrible job with explaining this option. And then they added a Tight switch inside and failed to mention that either.
Come on
Now if it only had the Tight option like the 2112.
Thanks !!!! Do you know if the original units had this? I heard it was added later?
I am not sure but if I remember correctly, I bought this quickly after it came out but I cannot guarantee it has it.
Thanks so much!
also used in Cambodia since 1990s
that bass tone + impeccable drummer's skills = ORGASMIC
I kind of have to agree with that. This is now my favorite drumming video, ever!!! The keyboards are not too shabby either, in terms of the gear mainly, they aren't here to overshadow the drummer, who is the star of the show. I miss those product demonstration videos on VHS. They were truly highest class. Today we might have high definition and 4K, but without the right product demonstrator, video resolution means absolutely nothing.
@dvamateur Very well worded. Raw talent pops out more than sharper pictures.
would you know where i could buy a working unit? i used to play this for a nickel at our local bowling alley when i was growing up and would dearly like to see if i can find one. so far no luck can you help me ?
Unfortunately not. Just keep looking.
Thanks.
I assume this would be plenty stable enough for a tonemaster Delete reverb. Thanks for the video
this was so advanced for its time
Thanks for thr review. Doesn't look very stable though!
That's a good way to end the song. Fire alarm activated and flashing strobe lights.
Muito bom esse módulo td7 Eu tenho um vídeo tocando com ele
Thanks for your offering and participation on this brak 0777! Just a quick question. I'm running Mixing Station on Android for the X18 table top mixer. I've connected it via ethernet because I couldn't get it to see the IP address for wifi. The routing matrix in MS shows that all the inputs are routed to the same number channels, 1-16 to 1-16. Just looking at channel 1, it shows that input 1 is routed to it and ch 1 confirms that, showing it on the strip. It seems I can't get a signal either visually on the meter or in audio through headphones. Because ch 1 is hi impedance, I plugged a guitar in and confirmed that the signal is reaching the jack end that's being inserted into ch 1. Is there anything else that you know of that would interrupt or reroute the signal between the input and the channel? If not, I may have to concede that I have a defective X18 unit. Thanks again for your time! Will Williams
I got a TD-7 a few years ago, it's a great drum module even if it's around 30 years old. It took some time but now I fully understand how to set this up. The factory settings are bullsh*t to be honest, spent a few hours to change it to my needs and now it's sounding great :)
Thank you for ur comment. I was wondering how old this drum set is based on these folks hair and dress style and you just answered exactly what I thought. 30 yrs would make sense with those hair styles
My favorite pinball machine when I was a teen! Yours plays exactly how I remember it played in late 1975.
Look at you; all young. Rockin a mullet. Cheers! 😊
Cool vid I recently got a gottleib roller coaster 1971 I think and trying to get tips on working on it I found a burned relay and the score board keeps running also won’t load a ball so hopefully the new relay will fix it
Glad you enjoyed it. As far as some tips, if your score motor is still running when you start, do your score reels go to zero? A very common problem is that switches on the score reel are not properly adjusted and the score motor will keep spinning until those switches are adjusted. This would also explain the ball not ejecting because it wont until the score reels are on zero. Good luck!
@@Brak0777 thank you for your response, the scoreboard does not go to zero would the tracking control relay that’s burned cause that or do I have 2 issues and I have to look into that adjustment as well
I am not quite sure what the tracking control relay is. Maybe it has another name? As far as the score reels go, check to see if the score reels are attempting to get to zero which would be indicated by a slight rocking motion. If you see that, most likely the switches in the score reel need adjustment. Caution though, Gottlieb switches on the score reels are very difficult and don't like significant adjustments. If you have a score reel that is going to zero properly, look at how they are set up first before any adjustments. A lot of make and break movement as the reel approaches and leaves the numbers 9 thru 0. Just a complete PAIN!!!! ( :
@@Brak0777 gotcha I real appreciate you taking the time to respond I’ll keep you posted and check out more of your vids
Wow !!!! In recent years I really got into electronic drums ! I bought the TD17kvx, then I wanted better feel on the snare drum, so I got the TD27 Module and the digital snare. I really want the digital hi-hat's and ride, but they're really expensive...lol Definitely getting them when they come down in price. I can't believe how good this TD7 set is !!!!! I was on Wikipedia looking at the history of Roland modules and saw that the TD7 looked like their first module if that graph is correct. It says it was made in 1992, so I looked up videos to hear how it sounds and reacts, and I'm blown away by how good this module is !!!!! I thought it was gonna sound like pork and have tons of machine gunning and Casio style sounds... Hehehehehehe Boy was I wrong !!!!! If I see this module for sale, I'd probably get it just for all the cool sounds, and to own a part of history !!!! The band in the video was excellent too, and this drummer is fantastic and such a diverse player. I really enjoyed this entire video ! Thanks !!!!! 👍😁👍
Yes, the drummer is excellent, and so is the TD-7 kit. Very original design, and very high quality sound. It's not an immediate gratification in terms of looks and wow factor of the Simmons SDS V set from 1981, but after you get passed the 7 inch pad size and the TD-7 diminutive size overall, you then start appreciating it. I've head the TD-7T kit since 2001 or so, and I haven't appreciated it enough. The V-Drums system clouded my brain with its physical modeling sound and large mesh pads. But now I am seeing what I've been missing for so long. The TD-7 is a revolutionary drum kit really, if you think about it. It can sound both electronic and acoustic. Quite a breakthrough. I think it might have been overlooked because let's face it, electronic drums were not really that popular in early the '90s overall. The Simmons sound was old news like the DX7 sound was old news. ddrum was quite hot, and the TD-7 was perhaps too small. But oh man, what it can do that TD-7 in the right hands. This is actually my favorite drum kit presentation ever. Same excellence level as the SDS V playing by Roger Rizittelli on Jarre's Concerts in China, or Senri Kawaguchi's playing on Yamaha PHX acoustic drums. These musicians and gear manufacturers make life worth living.
Alguiem podria confirmarme si michael jackson usaba este modulo en lso 80 y q otros arristas lo usaban
This specific module was made in 1992, so I guess not, but I'm curious what they used as well ??? Great question ! :-)
Just seen one of these in an antique shop here in the UK. Its up for £2300.00. Tempted but maybe a kittle overpriced do you think?
Thanks for the video and this great EM machine. I take it that the replay knocker wasn't working at that time ?
Thanks dude! Big help!
Love the video. You are a life saver and the way you show things is at a perfect pace. Can't Thank You enough!!! Great Job here!
...and WHY are we doing this? Is there a measurable audio improvement?
So you only need one amp.
can you make a tutorial on programming it right?
Man, I would like to but that is a big task. I will consider it and thanks for the request.
@@Brak0777 thanks for concidering it. the pre-owner of my td7 seemingly didn't know, how to do it either 😅
This is actually quite a versatile module. I really liked that you could do sound layering on each pad. For instance, for the snare drum, I would make the "loose snare" patch the first sound and then a harder /cracking sounding snare sound come through as you hit harder. I loved that feature.
I just bought a used Dean acoustic bass and I'm going to Musicland to look at the Dean gig bag for $75. I hope it fits. The Mgr was reluctant to go upstairs and actually show me the $60 Gator gig bag. He kept pointing to the "chincy" acoustic guitar bag he had hanging for $29.99 and said it's just like this but wouldn't actually show it to me.
That's is frustrating when you ask for what you want and they put barriers up! WHat's the big deal?? HAHAH I think Im a little bit snotty in that I prefer always a good case because I throw my guitars in the back seat of my car. and I want a quick set up and tear down when my band gigs.
can anyone recommend a video that shows how to set one of these dinosaurs up ? i may b missing parts... ffffffff
2:37 in and i already caught some bullshit hahaha. no snare hit. are they all just playing over prerecorded midi drum tracks and the drummer is sort of lip-syncing, for lack of better words? like, he doesn't have to b perfect bc they're just 'gonna use the pre recorded drums. i wonder how many other shenanigans i'll spot...
I'm sure that was just a video audio lag, or they REALLY spent weeks if not months on a hoax that ummm, I can't imagine doing. For what ??? LOL Makes no sense.
I just went back and watched more over again because of your comment... This would go down in history as the most well executed hoax in history...lol There's absolutely no way they fudged anything in this video. Even if they did it today with AI, I don't know if they could have come this close... Haaaaaa This is old, and those parts are too intricate. Again, why would a bunch of professional musicians and whoever worked on this cable access level video spend the insane amount of effort to make a hoax video...lol I can't imagine the amount of takes it would take to do something of this level of perfection. Month's of takes to get it this good...lol Anywho, I don't want anyone else to think this, so I had to object to something that silly and tinfoil hat, to go unquestioned.
@@laptoples i'm not saying the drummer isn't amazing bc he is but for budgets it's common to pull bs like what i'm describing. i caught other perts too. they most likely took multiple takes and the stuff i caught was just visually a different take but the sound had already been captured and they laid that over the final film. great upload none the less. :)
Probably the live recording didn't entirely worked out, maybe due to lighting or something, so they did what they did for music videos back then. Or, the TD-7 didn't respond to the trigger.
@@dvamateur who knows? :)
I downloaded loaded this for our church. The behringer app isn’t working anymore. When I press like EQ or compression it closes out. All I can do is use the main faders. My question is, I can’t seem to find where I can have a main fader option. There is one that says gain. But of course it turns the volume up on mains AND monitors. How do I just turn a channel up on mains as well?
Alarm starts at 2:47
you can also take a jumper cable and plug it into the Deep output and return in the fx loop and press the 50/50 and than the the output of the drive becomes single. The level 2 than becomes blend of deep and drive and the level one because master volume.
One vintage td7
🎉🎉 just what I needed to switch to mixing station. Great tutorial!
i like how at about 1:09:25 his main kick pedal stops working and he has to play the left pedal with his left foot lol. didn't miss a beat.
I would buy a tiny mixer or summing device long before modifying my hardware.
Sure, that would work too. However, if I can reduce gear, it is one less thing I worry about and one less thing that can create noise in the signal chain. Also, with Tech 21 putting this jumper in place, it is a normal function of the Ged-2112 that does not impact the functionality and it is a reversable modification. I also have the YYZ pedal, which is a normal one input, one output pedal that works very well.
Buenas ...quería saber si alguno probó conectar el vamp3 en un bajo?y que sucede si lo hago gracias.
Great Video. What's the biggest jackpot you can win on County Fair nickel Machine? $40.00? How?
I’m not sure. I think 600.
Thanks! 600 on a nickel machine would be $40 win. I used to have one in my old tavern in Newport, Oregon. I never figured out how to play it, but some of the old fishermen did. Mainly by putting matchbooks under the legs. So guys that won regularly, like Bad Ted and Pogo, I had to 86 from the machine.. The state finally outlawed it when they put their video poker in. I guess you would have to use OK button to get the odds up to 600?