KitchenAid Dishwasher Repair - Will Not Start - Thermal Fuse
HTML-код
- Опубликовано: 1 июл 2013
- This video shows you how to Repair a KUDC10IXBL4 KitchenAid Dishwasher W10402110 Thermal Fuse
Symptoms may include: Will Not Start or Not cycling, Dishwasher stopped mid cycle
View this video on our site: www.appliancevideo.com/kitche...
This KitchenAid repair could apply to multiple brands: such as Whirlpool, Amana, Maytag, Roper, KitchenAid, Jenn-Air, Kenmore, Magic Chef, Admiral, Norge, and Crosley
ApplianceVideo.com provides repair and diagnostic videos on *Major Appliances*. Our videos have been produced and reviewed by our factory certified technicians with over 30 years of infield experience. From the Do-it-yourselfer to the senior tech, our videos guide you step-by-step so you can successfully diagnose and fix your appliances with ease.
Fix it Yourself and Do it Right the First Time
Visit us at: www.appliancevideo.com
If we helped you, please support us and Subscribe to our channel!
ruclips.net/user/Applianc...
Or send us a tip, so we can keep making free Appliance Repair videos
Paypal: www.paypal.com/paypalme/appli... 
Хобби
This is the second time I have followed your instructions to fix this fuse! Thank you!
Hello, for
technical questions we have a Repair Help section at this link www.appliancevideo.com/repair-help/ . There are over 6,000 answers and questions you
can search through FREE to help you with your problem. Hope this helps
Thank you very much! Your directions were superb. We fixed our dishwasher and saved lots of money!!!!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping 1.6 million people like you every
MONTH. Please help us by subscribing to
our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page
Worked like a charm on my KitchenAid - thanks so much!
Craig
Glad we cold help. Thanks for your positive comment. Please help us provide more videos to our site by subscribing to our RUclips page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.
I just happened to have the exact same dishwasher and your video came in very handy. Thanks so much!
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
WOW this worked like a charm didn't have to call the repair company after all!!!
Rob
Thank you for your positive comment. Please help our ranking by subscribing to our RUclips page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
Thanks for giving this type of information out it was really helpful information prior to me taking mine apart, we will see if this is all it was. Thanks again man
Zach Richard
Thanks for the positive comment. Hopefully we saved
you some money. Please help us provide more videos to our site by posting ApplianceVideo.com
on your RUclips, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support
our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern
time. Thanks again your support. Matt, Ace Appliance service technician.
Great, detailed video. Thank you.
Robyn
Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our RUclips page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.
Excellent video. You saved me some money. Thanks a bunch.
Thanks for your response, and we are glad we could help.
Please help us by subscribing to our Facebook page, RUclips channel, or post
our website www.ApplianceVideo.com .
Thank you so much for posting this great video. It saved us a ton..! Cheers..!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
Thx so much! Great instructions!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
Thanks again, I have used your video two times to change the fuse in the same dishwasher. You gave very clear directions!
Thanks for your response, we are glad we could help. Our library
of over 5,700 videos are currently helping over 1.6 million people like you
every MONTH. Please help us by
subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook
page, Twitter, Instagram or any other social media sites. Your support will
help us keep producing more free quality videos.
This information is super helpful to those of us who can't afford to just "buy a new one" everytime something goes wrong, thank you!!!
I have a Kitchenaid that's (only?) four years old, and for the past year or so it's been turning on by itself and shutting down mid-cycle, some of the LEDs have stopped working and sometimes the buttons don't work... unplugging it and plugging it back in usually solves the problem. Since seeing this video I decided to open it up and I found much of the wiring has melted into this black hard rubber (insulation?) lining the tub... the wiring insulation is not damaged, so it was the black rubber lining that had melted... also, my computer was not mounted anywhere but was simply hanging from the wiring. Is is possible that the water temp got too hot in the tub? When I bought the dishwasher I turned up the heat at the water heater to ensure the dishes would clean. I have recently adjusted the water temp at the water heater but I'm still having the same problem, I'll probably have to replace the circuit board... any help would be so appreciated, I've got 5 kids, my wallet and my sanity can't afford for this thing to go out lol
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
My KitchenAid dishwasher has been acting like it has short in the panel for about a month now, and today (on Easter Sunday) it completely stopped lighting up and working at all. So after reading on another thread about the vent on the top, alongside the control panel being a bad placement because of steam possibly getting inside the panel, I had the idea to get out the hairdryer to dry it out. I then let it sit about 30 minutes before trying to turn it on and it worked! Long story short...try a blow dryer first. Happy Easter!
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
Be aware that on some KitchenAid models, in addition to the 10 screws on the back side (as shown in the video: 3 each side and 4 across the top), there is also one accessed from the front side, right underneath the door handle. This last one also has to be removed in order to remove the door panel and gain access for the rest of the video steps.
Thank you for
your positive response, we are glad we could help. Please help us by
subscribing to our RUclips channel or post our website www.ApplianceVideo.com on your Facebook page.
Thanks!
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Great video. I have KDTE704DPA0 and the Top Rack and Pro Scrub lights flicker. None of the other buttons work. I unplugged it as well as turned it off at the breaker for 5 minutes to let it reset and I get the same result. This occurred a couple of weeks ago and then worked for a bit. Now it is back. I cannot find anything that speaks to this particular issue anywhere and KAid was useless.
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
what was the outcome? Mine is doing a similar thing...
It is great that people are posting videos like this! I have an issue with my model kudc10fxss5. We select a cycle, it makes sounds like it is going to work as normal, but then nothing. I do not think it is pulling in water. I know that water is on to it, because it just stopped working on a random day. Of course my warranty expired 6 days ago.... I hope it is not something that is really bad. Any ideas? I made sure the float was free and moving easily.
Kevin
First of all try to call Whirlpool and see if they will cover the issue, they always have a grace period on their warranty's. If its not getting any water you may have a bad inlet water valve. Is it filling with water at all ?
Thaaaaaank you.
Thank You!
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
This is great. Wish I had found it a year ago. I have replaced this fuse three times. Any suggestions on how to find the cause of the problem.
Lori
You have have a heater or motor drawing high amprege. The new fuse comes with a two wire harness make sure you replace it. Thank you for your positive comment. Please help our ranking by subscribing to our RUclips page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
Sweet 👍🏻
+Michelle Proctor
Thanks for your positive comment. We have helped millions of people repair their
own appliances. Please help us produce more videos to our site by subscribing
to our RUclips page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account.
Clearly explained, thank you. The light on mine is blinking so I'm guessing the entire module needs replacement. Or, would the light be on a different circuit and the reason it doesn't work still only be the fuse? Thanks again.
Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Hello, what was the outcome for you?
Hey there AV guys, GREAT video. I was excited hoping it was going to help me, I was looking at my mom's dishwasher, the EXACT same model but...but, that fuse/thermostat you replaced her's does not have. The space is empty. You can tell something was designed to be there. Last week her dishwasher just stopped. There is power going to the unit and from the circuit board but the control panel seems dead, no lights or anything. But when I disconnect and reconnect the control panel you hear a little click sound. Any ideas why the SAME model would not have that fuse and what may be the issue? Power seems to be everywhere, but no lights on the control board and won't do anything. Thanks a lot! :-)
+Derek Lee
We would like to help you
answer your question. With our videos now getting over 900,000 views per month and
hundreds of questions from people like you, our technicians are now answering questions
at our website www.appliancevideo.com/repair-help/ . We also have over 2200 common questions
and answers that you can easily search through by your model number, appliance
make, problem or error code and it’s absolutely FREE. You also have the option
to email a factory service technician with a question on your appliance at www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you can
also search our library of over 2600 free repair videos. ApplianceVideo.com
specializes in quality DO-IT-YOURSELF appliance repair videos and we get over
800,000 views per MONTH to our videos worldwide and growing. If you need of
parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks for your support. Matt Ace
Appliance factory service technician.
Thanks.
I have Kitchen Aid Dishwasher, Model KDTE254ESS1, this has just the manual on your appliancevideo.com website. My issue is that nothing happens when you push any button. Only 3 buttons in the Options part of the control board flash. The Hi-Temp Wash, Sani Rinse, and 2-4-8 Hr Delay buttons flash alternatively. I tried turning off the breaker for 5min but that did not fix it. Does my washer have a fuse to replace? Do i need to change something else?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I watched your video very informative the only light that lights up is the cancel button which then makes noise as if it is doing some thing for about a minute then turns off? Does this suggest any thing Thanks
It is telling you the troubleshooting code(s).
@@saucesgalore I changed the control panel and it has been working fine. Thanks
This was my problem exactly, but now when I turn on the power two led lights are lit about half brightness. The washer is working ok. We have ran a few loads, but it's not the same as it was. We didn't have any lights when it was off. It also doesn't seem to be cleaning well. We cleaned everything when we were waiting on the fuse (we had an issue with a plastic fork blocking the grinder once). Any ideas?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I know this an old video but does this work with portables as well, It's not an electrical panel though
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I replaced the thermal fuse, but unfortunately a wash or two later the same problem occurred. It's been suggested that possibly the heater or motor is drawing higher amperage. What would happen if I bypassed the thermal fuse all together? Keep in mind the dishwasher is also fused at the house electrical panel.
Brian
It is not recommended to bypass the thermal fuse. I know recently Whirlpool just came out with new thermal fuse kit due to the fuses blowing prematurely. The new kit comes with heavier gage wire and terminals. Take your model number and call our parts department to see if your model takes this kit. If it does it will rectify your issue. 1-800-830-5465. Matt Ace technician
You can start a fire. That's what would happen.
How do I put this model kitchenaid into diagnostic mode KUDC03IVBL4
I have a kitchenaid kuds02frss1 and my normal and cancel keeps alternately blinking.. can't get it to reset and start. Any idea what I must do? Thanks
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 6,000
common questions and answers that you can easily search through by your model
number, appliance make, problem or error codes, and It’s completely free to
search through our question & answer library. There is a very good chance
you question is already answered there.
So I get it, but what caused the fuse to blow?
I have a kitchenaid KDFE104DSS1. I CAN HERE IT FILLING with water. It shows washing cycle but it's not washing. Any ideas to what it could be
If the spray arm is not spinning, then it's a failed recirculation pump/motor
I have a kitchenaid dishwasher kudc03, i have 3 blink lights and the machine thas not start.
Hoe can i fix?
wiigames
Possible key pad issue. Need to know what light are flashing exactly to assist further.
I have a Kitchenaid dishwasher model: KUDK03FTSS2. It won't start and the lights on the panel won't come on. I checked the circuit breaker and it has not tripped. I opened the front panel and there is power coming to the fuse. I bypassed the thermal fuse, still no lights. Does this mean the circuit board is dead and needs to be replaced?
Great question, you can call
our parts department at 1-800-830-5465 and they can give you help 6-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more
technical question that our parts department cannot answer, our technicians are
answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over
4,000 common questions and answers that you can easily search through by your
model number, appliance make, and problem or error codes, and It’s free to
search through our question & answer library.
nevin2784
When i try to start my wash cycle I hear the water running and then i hear a clicking sound by the electronics. Any clue what it could be? Could it be the motor or pump is out? Ive checked the float and checked to make sure it is getting water.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
Why did the fuse blow in the first place though? My dishwasher has stopped mid cycle and possibly blown a fuse but I've no idea why?
ocdfish
On this model the fuse just gets weak with age. 80% of the time we replace the fuse with no issues again. If it blows again then we will check other electrical components to see if any are shorted or defective. Please help our ranking by subscribing to our RUclips page or posting our ApplianceVideo.com site on your Facebook or Twitter account. This will help us to continue to make new professional videos from our factory trained technicians. We also have our authorized technician’s daily emailing professional advice daily to people like you that have appliance problems. We have helped thousands of people save hundreds of dollars. Thanks in advance for your help.
***** So i guess, it's just a low quality fuse.
RK1265
We have found that power spikes into homes can cause this issue. If you lose power to your home high or low voltage spikes will cause it, or sometimes just a weak fuse. If it happens a second time, you need to check wiring and motor amperage.
KITCHEANAID Repair guy never gave me any advise on my dishwaher, but charged me 75.00 Dollers on my card and fuck off. Thanks honest man.
Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our RUclips channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.
i did a reset, however after the reset process the lights do not remain on, and the dishwasher still doesnt power on or wash...any suggestions..thanks
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
My kitchen aid model # KUDS35FXSS1 suddenly won’t start when I push a cycle button. The control lock button flashes 3 times. Any ideas as to the problem? Thanks in advance.
Great question, if you have a
more technical question that our parts department cannot answer, our
technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.
what was the result of your issue? Mine is doing the same...
I have a kitchenaid dishwasher the light is flashing clean is there a rest?
Danny
All of our technicians are now answering questions daily on the ApplianceVideo.com website for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician.
+Danny Fiorella Blinking clean light indicates a fault in the heater, according to the manual for my Kitchenaid. Doubt you still need that information, but someone might.
So what would actually cause that fuse to blow ?
Great question, if you have a
more technical question that our parts department cannot answer, you can search
our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call
our parts department at 1-800-830-5465 and they can give you help 7-days A week
Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours
7- days A week.
I have a kitchenaid dishwasher KUDE20IXWH6 with the clean light flashing and can't do anything else
70kato
All of our technicians are now answering questions daily on the
ApplianceVideo.com website for anyone needing help. Just copy and paste this
this question under REPAIR HELP, and one of our factory authorized
technicians will answer any technical questions at absolutely no charge on
your appliance issues. We also have over 2600 free repair videos to help with
your appliance repair issues. Thanks for your support. Matt Ace Appliance
factory service technician.
+70kato Manual says check the heater
I have a KitchenAid Dishwasher model # KUDL15FXSS5. It is showing the error code of 4 flashing clean lights then a pause and repeat. It has locked the buttons. Is there anything that I can do.
And when I pulled the kick panel I found water had leaked under the dishwasher.
Rob
Go to ApplianceVideo.com and type in your model number or your symptom you are having. Our site has 2600 Free videos on it to help solve your problem. We add new videos every week. There is a very good possibility you will find a video that will help solve your problem. Please help our ranking by subscribing to our RUclips page or posting our ApplianceVideo.com site on your Facebook or Twitter account.
KitchenAid dishwasher has power, when start button is pushed it attempts to cycle on but after 10 seconds the cancel button is illuminated. I've powered down the dishwasher from the breaker box. Is it possible the fuse is the problem?
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
My problem my kitchenaid dishwasher always blinking on clean but it won’t start. I already unplugged many times and turn off but clean light still blinking.
Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .
I have a KitchenAid and it will not start. None of the Cycle lights show up when pushed. The lights that do show up are: Hi Temp scrub, Delay Hours, and Cancel. Any ideas as to what is wrong?
Kellee
It is totally based on the model of your unit. If you go to ApplianceVideo.com and type in your model number or your symptom you are having. Our site has 2600 free videos on it to help solve your problem. We add new videos every week. There is a very good possibility you will find a video that will help solve your problem. Please help our ranking by subscribing to our RUclips page or posting our ApplianceVideo.com site on your Facebook or Twitter account. Thanks Matt, Ace Appliance service technician
ApplianceVideo.com 3384545
kenmore 3384545
My kitchenaid dishwasher do not unlock, the lock light is on... I press go dissapear or go to cancel when let it go go back to lock, what can be done
Leyda
We now have our FREE repair help website at ApplianceVideo.com, all of our technicians are answering questions daily on this website every day for anyone needing help. Just copy and paste this this question under REPAIR HELP, and one of our factory authorized technicians will answer any technical questions at absolutely no charge on your appliance issues. We also have over 2600 free repair videos to help with your appliance repair issues. Thanks for your support. Matt Ace Appliance factory service technician.
The easy answer: Just press "Energy Saver for 4 seconds" and that will do it.
That looks like a Whirlpool (part# 661566) thermostat not a fuse.
+totallyfrozen
All of our technicians are now answering questions daily at our www.appliancevideo.com/ website under the Repair Help section. We also have over 1600 common questions and
answers that you can easily search through by your model number, appliance
make, problem or error code and it’s absolutely FREE. You also have the option
to email a factory service technician with a question on your appliance at
www.appliancevideo.com/repair-help/ . If you’re looking for a repair video, you
can also search our library of over 2600 free repair videos. ApplianceVideo.com
specializes in quality DO-IT-YOURSELF appliance repair videos and we get over
800,000 views per MONTH to our videos worldwide and growing. If you need of
parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks
for your support. Matt Ace Appliance factory service technician.